Have i found another big bug? from 2nd monitor profile bug to Exp panel bug

Well 2.0.1 is out and i was hoping for a fix for the second monitor color profile bug ... but no, not yet.
But guess what .. i think i have found another little treat.
Ok here we go, click on the Exposure, Recovery or Black Point sliders (but don't move them), notice anything?
On my system as soon as you click, the shadows block up. Take your finger of the button and they shadows go back to normal.
Next .. click and slide, when the button is down... blocked shadows again, release the button and shadows open up.
This also happens in the White balance panel.
Also we still have the tint slider problem, click it and it jumps the tint.
The exposure and white balance problem only happens in full screen mode.
It happens on my second monitor when running in mirror or alternate (or any other of the settings)
If i press the F key and go full screen on my macbook pro, the same thing happens on the macbook's screen.
Press the Z key to zoom to 100% and the problem goes away on either screen.
But get this ..... click any of the sliders in the Enhance panel before going to the Exposure panel (you don't have to move them), then go back to the exposure panel and...EVERYTHING FINE.....whaaaaaaat.
So now i have a second monitor with dodgy colors and an exposure panel glitch.
Thought this was an update!!!
Anyone else got this problem?
Oh, just to add, i have deleted pref files, deleted aperture altogether, re-installed 2.0 and 2.0.1, rebuilt library, tried on another library...all with no joy.
Sigh
Mike
rebui

System is macbook pro 2.4 4gb ram, formac 2010 second monitor.
Leopard 10.5.2
pro app 4.5
Seems that i am not the only one with this problem, not many out there... just a few.
Couple of links
http://forums.dpreview.com/forums/readflat.asp?forum=1017&thread=27043649
http://www.flickr.com/groups/aperture_users/discuss/72157604042773520/
Mike

Similar Messages

  • Displays - gather windows from 2nd monitor? OR - turn off detected display?

    I use my Sony HDTV (960XBR) via HDMI as a 2nd monitor sometimes (also use a 17" LCD sometimes). When not using the Sony for the Mac (like actually watching TV!), the Mac still detects it as a display and allows any program windows I'd placed there to remain on that display, even though it's not actually displaying the Mac signal.
    Question: is there any way to "gather" all program windows onto the primary display? Or "turn off" a detected display from the Mac?
    Thanks!

    Most applications support the following: under the Window menu, you'll see a "Bring All to Front" command. If you hold down the Option key, that changes to "Arrange in Front". Choose that to have all windows arranged in front. That should probably force all windows to the main screen.
    Hope this helps.....
    Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM -   Mac OS X (10.4.6)  

  • I am looking for a 'trashed' email but found a big gap from oct. 2010 to oct. 2011. where are all those emails?

    i am trying to find an email from july 2011 from a specific person but find when i look in 'trash' that there are no emails kept from oct. 2010 to oct. 2011 from that person, and yet i know i received many. where can i find them?

    That is a legitimate Mozilla newsletter. As it says in the email:
    You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
    Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
    Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

  • 2nd monitor & app problem

    i copied and pasted this from another mac forum... there was no reply. sometimes i have the same problem with apps such as cdxtract, battery 3 and Kontakt 3 in standalone mode.
    Not Logic related but any ideas coz this can be very annoying if i forget to drag from 2nd monitor to the mac before hand.
    I have a 2nd monitor attached to my Mac and if open an app Window on the 2nd monitor the next time I start the app the Window always defaults to the 2nd monitor (even if the 2nd monitor is turned off). Since I don't always remember that the app was opened on the 2nd monitor I would like a way to force the app to default to the primary monitor so I don't always need to turn on the 2nd monitor

    The second screen is an extention of the primary screen and when you switch spaces, both will change to a different space.
    There is a solution, but it requires associating the app with All spaces in System Preferences > Expose & Spaces > Spaces tab > Assign the app to Every Space.  Then as you can spaces that app is present on all spaces. 
    Regards,
    Captfred
    If you don't want the browser in the primary monitor for all spaces, then use two different browsers.  Safari for the primary browser and Firefox for the browser moved to external display.  Then define Firefox in all spaces and Safari to only one.

  • Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

    The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor.  Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps. 

    If you won't lose anything and if it is not a big hassle, I would re-install.
    Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
    The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
    http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

  • IMac monitor goes dark; 2nd monitor ok

    I have a dual monitor setup on my iMac (2009) running Snow Leopard (10.6.8).  The iMac monitor had been working great, but now it goes to a black screen.  I am able to access it briefly (for about a second) by lightly pressing the power button on the back.  The iMac monitor flashes on briefly when I do this and I'm able to quickly click on user.  I used this same method to open Settings and drag it over to the 2nd monitor to change the display setting to Mirror mode, so I'd have access to the dock on the 2nd monitor (Dell 2007WFP). 
    I have tried the following so far:
         checked cables
         restarted by powering off, pressing on/off button for 5 seconds, unplugging for 15 seconds.
         booted in Safe Mode
         reset PRAM (I believe this was reset, but I don't know for sure because I couldn't see anything on the monitors.)
    Other information:
         2.66 GHz Intel Core 2 Duo
         8 GB 1067 MHz DDR3
         NVIDIA GeForce 9400
    Thank you in advance for help with this issue!

    Replacing FBDIMMs would be today inexpensive and worth doing.
    No one knows if heat is an issue without your using thermal sensor monitor. Probably want to up the default fan speeds while at it.
    And because you don't have Lion+ then even more reason to setup a small maintenace volume on another drive with OS X basic system for repairs. In fact you should always have a bootable backup or two  you can rely on.
    Restarting may work, or it  may be you have now new issue with corrupt fies or directory that a safe boot even is no guarantee of fixing.
    When in doubt, try a clean new OS install on another drive.
    And FBDIMMs: $25 for a 2x2GB set on Amazon.com
    You want to get  the most out of what  you have, a small investment  in RAM,  maybe recycle those drives for 2-4TB units. And an SSD will have system responding better and perform better.
    My guess, the 5870 wasn't needed and was overkill and a 5770 for almost  half would have been more than adequate.

  • Email notification not working from Server Monitor (for power outages etc.)

    I have my email address entered in the notifications fields for power on Server Monitor. I tried pulling the plug (it's on a UPS), which it did notice but it never sent any emails. How do I debug this? Where is the SMTP settings or whatever is needed? Have people gotten the email notifications from Server Monitor to work?
    Mike

    tobias Eichner wrote:
    Have you checked your mail filter, maybe the notification got mistakenly marked as spam ?
    thank you for your reply! Is this working for you - are you getting notifications? My spam folder doesn't have any of these. Where did you set up the SMTP info for this? I don't see this anywhere. On the web, at
    http://support.apple.com/kb/TA21298?viewlocale=en_US
    it looks like you have to tell it how to send the emails in Message.framework:
    The Message.framework looks in two places for a way to send email. The first
    is that it looks for an SMTP server configured in the Email tab of Internet
    preferences. The other way is to use an email account configured in Mail.
    the question is, which user's .plist file for internet preferences or for Mail - which user's info is it using to send the notifications?
    Mike

  • Hi, I have found my older ipod guessing 2nd in line from first generation. Music was on a PC, this tower is long gone but i still have my music on this older device. It opens in itunes but I cannot transfer of drag into my itunes library.

    Hi, I have found my older ipod guessing 2nd in line from first generation. Music was Downloaded from BearShare onto a PC, this tower is long gone but i still have my music on this older device. It opens in itunes on my mac laptop but I cannot transfer/send toor of drag into my itunes library. I can only listen to the music from the laptop. If I try to transfer songs to a laptop folder it copies in text. Any suggestions?

    The following user tip is worth checking through:
    Recover your iTunes library from your iPod or iOS device

  • HT4889 I have accidentally created another account when using Migration Assistant to a new MBA. How do I now 'migrate' all the files from both accounts into one to save myself having two accounts, both of which are me? Help?

    I have accidentally created another account when using Migration Assistant to a new MBA. I have read that I probably should not have skipped migration in the initial set up and the problem would have been avoided but, alas, here I am. Does anyone know how I can 'migrate' all the files from one of the accounts that has been created to the other, so then I can delete it and have a single user on the computer seeing as I am the only person using it? I have read starting again, if this is the way to go, where is the best place to start 'starting again'?

    Yes definitely should see it but its not coming up (I don't think) when I log out of 2nd user and into the main account. Opening finder in the 2nd account, I can obviously find the public folder because thats where I dropped all the files, but when in the main account, it can't be found. The only public folder that comes up is the folder for that account (main account) and it does not display files I'm looking for. Frustrating....
    EDIT: Have found it through a round-about way but all music and photo and movie etc files have a red stop sign disallowing them from being transferred. Can you guess what the next question will be?

  • I have lost my photos from my PC. I have them only on an iPod Touch 2nd Gen.

    I have lost my photos from my PC.
    I have them only on an iPod Touch 2nd Gen.
    How can I copy them from the iPod Touch 2nd Gen to my PC?
    The software version on the ipod 2nd Generation is 3.1.1(7C145).
    I would very much appreciate help in this regard.
    Thanks

    If the photos were synced to the iPod;
    - you need a third-party program like TouchCopy or Phone view to copy them to another computer.
    - Email them to the computer
    - See it there is an app available that will transfer them to your computer. However, there may not be any compatible with your model iPod and its iOS. There is the Photo Transfer app but that requires iOS 4.3 or above but your 2G iPod can only go as high as 4.2.1

  • Found another Belle calendar bug (Nokia, when is B...

    I know, Nokia does not react here but writing to Dutch Nokia Care is no use: either no answer or a standard answer like "Your C6-01 is a high quality business phone with advanced features ... blah blah blah".
    But okay, found another bug in the Belle calendar. In the calendar widget to be precise: I have a easy week, no appointments. Next appointment is Monday 12 March at 09:15. Much to my surprise I did see the next thing in my calendar widget this morning Monday 5 March: at the top "monday" and below that 09:15 Doctor. I see that today, on Monday the 5th while that appointment is set for Monday the 12th. But that bugged calendar widget is not showing a date, just "monday".
    So besides the stupid 1 line mention bug, it also shows info that is confusing to say the least.
    So please Nokia, fix the calendar!!
    (and no, I do not want that ComingNext app )

    Export the region as an audio file first. Right-click the track select Export as audio file.
    Then import the track into the new project.
    Alternately, do a Save As of the project as a different file name.
    Re-open and rearrange the tracks as you please.
    Hope that helps.
    Message was edited by: Beatoven

  • I've just bought an iPhone 5S in the UK, seems like a big mistake. I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to PC, Fix ?

    I've just bought an iPhone 5S in the UK, seems like a big mistake, but luckily by law we can return goods, which is exactly what is going to happen if I cant get this to work. This is my business phone, not having it functional can cost me money.
    I have turned off sync to icloud from the phone for both my contacts and calendar, as told on itunes. However, iTunes still says they are synced from iCloud and wont sync to my PC, why and how do I fix it so that it doesnt go to iCloud for anything ?
    The phone currently has no contacts or calendar information installed.
    PC is HP Probook 4730s running Windows 7, Professional, version 6.1.7601 Service Pack 1 Build 7601.

    I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
    I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
    Anyway, if you choose to do so, you can leave feedback here:
    Apple.com Feedback
    Apple Support Feedback
    Developer Feedback
    Product Feedback
    QuickTime Feedback
    Search Feedback

  • I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

    I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?  Any help will be appreciated.  Thank you.

    This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
    https://discussions.apple.com/docs/DOC-4141

  • HT1311 i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

    i have american account but i just now have 0.61$ and i have another gift card from uk.i want to use it but itunes said i have to change my country and its not possible before i spend all my money.my question is how i can spend a 0.61$ ?

    If you are now in the UK then you can try contacting iTunes support and see if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I may have found a software bug.  Ver 12.0.1.26   Was playing in non shuffle mode.  Turned shuffle back on but it is not doing it.  Any guesses?

    I may have found a software bug.  Ver 12.0.1.26   Was playing in non shuffle mode.  Turned shuffle back on but it is not doing it.  Any guesses?

    SadisticIron wrote:
    i just baught my first iphone and it is a jalbroken
    Buzz! Thank you for playing!
    Discussing jailbroken devices is forbidden here by the Terms of Service.
    You can not get help here.

Maybe you are looking for