Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor. Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps.

If you won't lose anything and if it is not a big hassle, I would re-install.
Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

Similar Messages

Pavilion Slimline 400-034 Windows 8 not detecting 2nd Monitor

Hello, I have a Windows HP computer, and I recently bought a 2nd monitor for my birthday, link click here. I have the same monitor for my first, and that works perfectly fine, when I bought the 2nd monitor, I realized I have a different port, and it's not a DVI-I, it's a DVI-D. So I bought a VGA to DVI-D connector, so I plugged my VGA into the connector and then plug the DVI-D into the tower. I turned on my computer, and the 2nd monitor wasn't detected, the DVI-D connected one, but the first one was. The monitor was set into mode auto, so it detected any working inputs, DVI, VGA, HDMI, and another. The 2nd monitor works thought while into the DVI-I port, but neither work in the DVI-D port. Any help (: ??

Here are the specs for you HP Pavilion Slimline 400-034 Desktop Computer and here is the user guide for your Insignia™ - 24" LED HD "NS-24EM51A14" Monitors. Based on the specs of your computer, it has one DVI-D (digital only) output and one DVI-I (digital and analog) output as shown below;
#3 - DVI-D (digital only) #4 - DVI-I (digital and analog)
According the user guide for your Insignia monitors... VGA, DVI-D, and HMDI inputs are available. Using a passive DVI-to-VGA adapter will work on the DVI-I port because it supplies both digital and analog signals. Using a passive DVI-to-VGA adapter will NOT work on the DVI-D port because it only supplies digital signals. Please remove both DVI-to-VGA adapters and VGA cables and replace them both with DVI-D cables. You can purchase these cables online and at most local retail store such as Fry's, Best Buy, Walmart, Target, Radio Shack, Staples, Newegg, Office Depot, etc. Once you have purchased two DVI-D cables, please connect your hardware as follows;
Computer ---> DVI-D cable ---> Monitor #1
Computer ---> DVI-D cable ---> Monitor #2
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How can i use my tv as the 2nd monitor

hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

Hi,
Here is it specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
You can only see:
Front:
1 - Screen area
2 - Microphone array
3 - Webcam camera
4 - Stand
5 - Speakers
Back:
1 - Optical disk drive (actually right)
2 - Stand
3 - Kensington lock slot
4 - Power button
5 - Memory card reader and other I/O on left side
6 - Motherboard back I/Os (specific I/Os are model dependent)
7 - Activity indicator
8 - Power connector
9 - LAN (ethernet)
10 - Four USB 2.0 ports
11- Audio port (actually left side)
Left:
1 - Hard drive activity indicator
2 - Memory card reader activity indicator
3 - Memory card reader
4 - Two USB 2.0 ports
5 - Microphone jack
6 - Audio port
Right:
1 - Optical disc drive
The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPhoto window suddenly moves to 2nd monitor

This only happens when iPhoto is open on my primary monitor which is the built in screen on my 27" iMac. When I click on a photo the application will often partially minimize and then jump to the external monitor.
Seperate issue - after exiting full screen the application keeps running but is not on either monitor. I looked and it is also not running on a different virtual desktop (can't recall what apple calls this). The only way to get it back is to close iPhoto and reopen.
iPhoto does not act up with the 2nd monitor disconnected. Other applications do not behave this way.
Thanks! Taylor

hmmm...
i can move the mouse freely between the 2 monitors, going above the menubar to the ext. monitor.
just sometimes, a window won't move up (safari happens mostly; stuck at menubar...)
any other thoughts, anyone?

How do I get pop-up windows to show the navigation buttons (not just the address box)?

When I click on a link that opens a new firefox window, the new window shows a navigation toolbar that does not include the back, forward, stop, and home buttons (it only shows the internet address box). However, the original firefox window that I navigated away from shows all of the navigation buttons AND the address bar. How do I get these new firefox windows to show the navigation buttons in addition to the address box that automatically appears?

See:
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

Can the 2nd monitor be an extended desktop?

i know its a silly and simple question but im new to hooking up a second monitor. So if i get the right connector from the apple store and hook up a second monitor can it be an extended desktop or will it only be a mirrored image?

Can the 2nd monitor be an extended desktop?
Yes.
(52224)

Using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor

I'm using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor screen. It is simply locked to the right side of my 1st monitor. A solution would be great. Sorry if it's a noob question.
Thanks for your time.
Monty

No problem. We've all had newbie questions at one time or another.
However, I am going to have to put on my clairvoyant hat and guess you are running Photoshop 10.0.1 (CS3). :/
In CS3, do NOT attempt to move the palette well, i.e. the dark gray zone above the palettes. That you cannot move.
Instead, grab each palette individually by the light gray bar just at the top of each palette.

SAPScript: why the window only show the LAST line

Dears,
In my form, one of the window only show the LAST line of the it.
I have set the window enough space, also when debuging the program , open_form, write_form,
all of those sy-subrc = 0.
both static texts and dynamic texts are set in the window, but only the last line shown.
Anyone could help me?
Thanks a lot.
Sincerely,
Julie Lv

Hi,
There are several possibilities to resolve your problem.
You can work with 2 main windows on in1 page.
With NEW-WINDOW you switch to the next main-window
How to use it.
make an item in main window with that /: NEW-WINDOW command
if you are ready with first loop call a WRITE_FORM with that NEW-WINDOW statement.
to cojntinue in the other main.
Other possibility is. (in case there are not ot many lines)
Use for every line other variable names.
Fill these in the loop. And after loop WRITE FORM
eg. (if maximum is 3 lines)
&VAR1_1& &VAR1_2& &VAR1_3& &VAR1_4&
&VAR2_1& &VAR2_2& &VAR2_3& &VAR2_4&
&VAR3_1& &VAR3_2& &VAR3_3& &VAR3_4&
Hope this helps.
Gr., Frank

To show the 2nd part highlighted there only once on each page

Hi,
Could you pls see this for the problem?
http://www.4shared.com/document/VExaTDlv/t31.html
Regards,
edward

Hi,
The 1st highlighted part below should be Group 1 in the report.
The 3rd highlighted part should be Group 2.
Without using a subreport for showing the 3rd part below, is there still a way to show the 2nd part highlighted below only once in each page?
what is the 2nd part the column headings?
what do you mean highlighted?

For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
Is this something related to the build process or how the folio was created?
The folio also shows up in the Android app (at least the phone I have tested with).
Thanks,

"Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

My hotmail tab showed the number of emails receved but has stopped

I have tabs along the top of my page,the hotmail tab showed the number of emails received,but has stopped showing them,can you help?

Hotmail has been having some hiccups lately. Try clicking the grey bar which has the word "Inbox" in it.
Also, click "Help" | "Check For Updates" and update Firefox to v3.6.19
Similarly, please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. Out of date plugins expose your system to attack.

My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.

Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

Hi pedro109,
If your iPhone is recognized by the computer, but not seen by iTunes, you may need to restart the Apple Mobile Device Service, as described in this article -
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Once iTunes recognizes the iPhone you should be able to sync it with iTunes. See this article
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
http://support.apple.com/kb/PH12317
Thanks for using Apple Support Communities.
Best,
Brett L

The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Hello All,
I am getting below error can you please help me
Error:-
The transaction associated with the current connection has completed but has not been disposed. The transaction must be disposed before the connection can be used to execute SQL statements.

Perhaps this thread will help you out
http://stackoverflow.com/questions/11453066/error-the-transaction-associated-with-the-current-connection-has-completed-but
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

Similar Messages

Maybe you are looking for