Have obsolete X509anchors flooding Console - looking for ideas

My 2009 iMac (2Ghz Intel Core Duo with 4GB RAM) has been upgraded from Leopard to Snow Leopard (no clean install) I have noticed sporadic freezing and the only thing in the console shown is
/system/library/coreservices/systemUIserver.app/contents/macos/systemuiserver[11 0]     Warning: accessing obsolete X509Anchors.
This mac also has installed Office 2004, 2008 and then cleaned to install Office 2011.  Long time ago I had Entourage but removed it (cleared application support and preferences as well)
Just looking for avenues to go down to try to clear up this error.
Thanks
JTS

Hi,
Does anyone have a suggestion or a resource they could refer me to that talks about doing mass changes in Discoverer.You should note that oracle doesn't support those kind of changes and you should test it very carefully.
Is there a way to do a mass update which would append the words "Obsolete Report" to all discoverer reports?A way i can think of is to update the underlying table but as mentioned before you should be very careful with it since it is unsupported.
UPDATE EUL_US.EUL5_DOCUMENTS A
SET a.doc_name = a.doc_name||' Obsolete Report';
*few issues you should pay attention to:
1. concatenating the "Obsolete Report" might go over the limit of the workbook name.
2. you should check the behavior of links (if you use those).
3. perform real detailed tests !!!
Tamir

Similar Messages

  • Looking for ideas for transferring large amounts of data between systems

    Hello,
    I am looking for ideas based on best practices for transferring Large Amounts of Data in and out of a Netweaver based application.
    We have a new system we are developing in Netweaver that will utilize both the Java and ABAP stack, and will require integration with other SAP and 3rd Party Systems. It is a standalone product that doesn't share any form of data store with other systems.
    We need to be able to support 10s of millions of records of tabular data coming in and out of our system.
    Since we need to integrate with so many different systems, we are planning to use RFC for our primary interface in and out of the system. As it turns out RFC is not good at dealing with this large amount of data being pushed through a single call.
    We have considered a number of possible ideas, however we are not very happy with any of them. I would like to see what the community has done in the past to solve problems like this as well as how SAP currently solves this problem in other applications like XI, BI, ERP, etc.

    Primoz wrote:Do you use KDE (Dolphin) 4.6 RC or 4.5?
    Also I've noticed that if i move / copy things with Dolphin they're substantially slower than if I use cp/mv. But cp/mv works fine for me...
    Also run Dolphin from terminal to try and see what's the problem.
    Hope that help at least a bit.
    Could you explain why Dolphin should be slower? I'm not attacking you, I'm just asking.
    Cause I thought that Dolphin is just a „little" wrapper around the cp/mv/cd/ls applications/commands.

  • I have canon ixus 130 and looking for charger

    I have canon ixus 130 and looking for charger

    Your posting this in the spreadsheet forum for Apples iWork program called "Numbers" on mobile devices (iOS).
    Please let us know if you are attempting to make a spreadsheet to track this (This forum)
        or
    Looking for a premade app to do this (a different forum/website/search)
    If the first choice, please give us more information on what aspect of the spreadsheet is giving you an issue and we can attempt to help out some.
    Thanks
    Jason

  • I have a client who was working with Now to Date, which is now obsolete.  She is looking for a mac calendar program that is as close to Now to Date as possible.  She has installed Outlook 2012 but finds that is takes too much time to enter data.  Help?

    I have a client who has been using Now to Date on her Mac.  That program is now obscure and she is looking for software that is extremely similar.  She has tried Outlook for Mac and it is too labor-intensive for her.  She wants a professional look, and something that is not linked to e-mail as she works with a lot of proprietary information.  Help?

    I could not identify that app in macupdate.com. If a Calendar program, what about iCal? did she try it and disliked? If you go to macupdate.com, and type ‘calendar’ in seach filed, you will be given a lot of apps, you or she should test what it most appropriate for your/her needs.

  • Looking for ideas: mass-delete qualified links

    Hello SDNers!
    I'm looking for an innovative idea on how to mass-delete qualified links. I want to delete all the qualified links to a specific non-qualifier from many records at once. Idealy the scenario would be to search on a specific qualifier, and be able to select all records and delete that qualified value from them. Data Manager can't do this, obviously.
    The closest I managed to get was to delete all the values in the qualified link using an import, but that's not enough, I need to delete the links completely.
    Before I turn to the APIs, anyone has an idea?
    Thanks
    Alon

    Alon,
    You should be able to accomplish this with an export and import.
    1. Select the qualified record you want to delete using the search parameters
    2. Export out the records with this qualified field - it should only export out the qualified record that you have selected in your search parameter
    3. Import this file with the Import Manager
    4. Map the qualified table name in the source to the destination
    5. Right click on the destination field name and select "Select Qualified Update > Update"
    6. A new dialog box will appear
    7. For new links select "Skip"
    8. For existing links scroll down and select "Delete"
    9. When the file imports it should delete all instances of that qualified record
    That was a quick explanation. Let me know if you need more detail.
    Regards,
    Tim

  • Want to get published? I'm looking for ideas for The Online Learning Idea Book, Vol 2

    I edited The Online Learning Idea Book a few years ago and it has been an amazing success! I regularly get emails from readers telling me how much the ideas have helped them. I’m hoping you will submit ideas and help me find additional contributors for the new volume! You can see some of the ideas from the first volume here.
    Because the book has been so well received, Wiley has recently asked me to produce a new volume with new ideas. Why submit ideas? Here are three good reasons:
    Helping others in our field improve the quality of online instruction
    Gaining well‐deserved recognition for your solutions and insights and willingness to share those solutions and insights to help others (each selected idea will receive full attribution)
    You’ll receive a free copy of the book if your idea is selected.
    Want to know more? Go here to download the                      FAQs.
    I'd love to receive some ideas that show unique ways to use Connect but feel free to submit other ideas as well (the FAQs explain what I am looking for in detail).
    Patti
    Patti Shank PhD
    Learning Peaks LLC
    Instruction and information designers
    www.learningpeaks.com

    Probably either ifixit or OWC...
    Clinton

  • Appcelerator has 2 positions - looking for IDE Sr. Developer and Sr. QE

    Here are the details of open positions. Send me your profile (to pinnamur at gmail dot com) if you are interested to work on the IDE tools in a fast growing and most visionary mobile company.
    - Sr. Software Engineer (Titanium Studio)
    Immediate opening for a talented engineer to work on our Titanium Studio team designing and building developer-focused applications created to make coding on the Titanium platform as simple and enjoyable as possible. Ideal candidates not only have experience as a software engineer writing code, but also have been involved in leading the architecture, design and implementation of best-of-class tools targeting the developer market.
    RESPONSIBILITIES:
    Define, design and implement exciting new product features in Studio
    Work closely with platform and cloud teams to expose new functionality to developers
    Review code and write unit tests
    - Lead/Sr. Software Quality Engineer - IDE
    We are looking for someone who loves to break code and work closely with engineering to make sure it gets fixed and released as a first-class product. You'll be owning the Appcelerator's Titanium IDE.
    RESPONSIBILITIES:
    • Create test plans and test cases for the Titanium platform
    • Evaluate existing test suites and identify improvements/tests that need to be written
    • Ability to clearly communicate expected behavior and steps to reproduce defects, including screenshots and supporting evidence
    • Work with software development team to help them identify source of and correct bugs and defects
    • Report and follow up on all defects found. Track and verify their resolution
    • Posses a willingness to learn new technologies, applications and techniques
    • Troubleshoot issues in our entire ecosystem (be they cloud, IDE, SDK or other)

    You pay for relocation or are you interested in telecommuters.
    Jelqing results

  • On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

    On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears. already suggested
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Does Pages have the feature I am looking for?  Or does TextEdit (i hope so)

    hello! I was looking for a specific wordpad function, and was hoping that Apple's TextEdit program had such a feature.
    What I am looking for, is the ability to insert the equivalent of one of those little triangles that point to the right, indicating that there is expandable content if clicked (which would of course reveal the content underneath what followed the triangle, which would than be pointing downward). You know, very much like how you view a finder window in 'list view'.
    I would love to have those expandable/collapsable triangles for lists I set up in TesxtEdit. This function would also work well for writing paper outlines, or organizing information under various topic headings, so I could enter notes and content under each heading's dropdown area of text, and than collapse it to minimize the cluttering of my document.
    Does TextEdit have a feature that provides the same kind of result? If not, does anyone know of any program that has a feature like this? I currently have been employing TextEdit for my needs running Tiger, so please fill me in on any features that TextEdit under Leopard might have that would get me to my desired goal.
    Thanks!!!!!

    No, you are describing a form of Outlining that Pages does not do neither does TextEdit nor any other text editor I know of.
    OmniOutliner does however do this:
    http://www.omnigroup.com/applications/omnioutliner/pro/
    Pages' Outline feature does something similar but without the little rotating arrow.
    Peter

  • Looking for ideas for a: Photo Gallery portlet

    Hey all,
    I'm wondering if anyone out there uses any special code or 3rd party apps, or anything to fancy-up a portlet to display photos?
    For the last few hours I've been working to integrate CoolIris (http://www.cooliris.com) with a Publisher portlet but have run into a snag that I'm having some difficulty debugging. But rather than spinning my wheels on this one solution, I figured I'd reach out to all of you to see how you display event/holiday/etc types of pictures within your portals.
    Ideally I'd love for our users to be able to submit images directly through a Publisher portlet and create something more flashy than just a static image that they have to scroll through.
    Any thoughts?
    Thanks!
    Geoff

    I'm looking for the same functionality.
    What I'm thinking of doing is to use a document library component for users to upload and manage images. Then use Content Presenter to display the images.
    Problems:
    - Content Presenter doesn't do folders well.
    - default templates don't show images
    - icon view only shows an icon representing the type of content
    Another option is to use the wiki as at http://wiki.oracle.com/photos/albums . Don't know if that can be done yet but cuold be easier for users.

  • Does TextEdit (or any other mac app) have the function I am looking for?

    hello! I was looking for a specific wordpad function, and was hoping that Apple's TextEdit program had such a feature.
    What I am looking for, is the ability to insert the equivalent of one of those little triangles that point to the right, indicating that there is expandable content if clicked (which would of course reveal the content underneath what followed the triangle, which would than be pointing downward). You know, very much like how you view a finder window in 'list view'.
    I would love to have those expandable/collapsable triangles for lists I set up in TesxtEdit. This function would also work well for writing paper outlines, or organizing information under various topic headings, so I could enter notes and content under each heading's dropdown area of text, and than collapse it to minimize the cluttering of my document.
    Does TextEdit have a feature that provides the same kind of result? If not, does anyone know of any program that has a feature like this? I currently have been employing TextEdit for my needs running Tiger, so please fill me in on any features that TextEdit under Leopard might have that would get me to my desired goal.
    Thanks!!!!!

    Any Outliner will do this.
    Omni Outliner Circus Ponies Notebook to name but two of very many. Search on MacUpdate
    Regards
    TD

  • Obsolete X509anchors? (Console message when apps launched)

    Every time I launch an application this message is displayed in the system log (Console.app). Is this a problem that should be fixed? How?
    Jul 19 10:15:29 Macintosh /Applications/Mail.app/Contents/MacOS/Mail[1563]: Warning: accessing obsolete X509Anchors.
    --Thanks.

    I'm unable to change the brightness of my display because of this problem, I believe. I wrote a bit more about it here:
    http://nslog.com/2007/12/22/lostability_to_change_displaybrightness

  • How come iTunes doesn't have a band I am looking for?

    I am looking for a band that I LOVE, and iTunes doesn't have it or something. Does anyone know why iTunes doesn't offer all music?

    Isabella Ann wrote:
    I am looking for a band that I LOVE, and iTunes doesn't have it or something. Does anyone know why iTunes doesn't offer all music?
    What band are you looking for and in what country iTunes store?
    You can request specific artis/music/songs here
    -> http://www.apple.com/feedback/itunes.html

  • I have bought a new Iphone 4S and also own a Mac pro, also IPad.        I did not install find my phone on the IPad, my IPad has either been misplaced (have tore the house up looking for it) or it has been stolen is there any way I can find where it is at

    I resently purchased the New IPhone 4S, and I have a mac Pro, plus a IPad.  I have misplaced my IPad or it has been stolen is there any way by using Find My phone it can be located Thanks Look for My IPad

    Unless you set up MobileMe / Find My iPad on it before it was lost/stolen, then no, there isn't any way to locate it. If you did set up MobileMe on it then you could try locating it either via me.com on a computer or Find My iPhone / Find My iPad on a another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or MobileMe disabled on it.
    If you think that it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

  • I have a friend who is looking for an iMac to run X-Plane (Flight Sim)

    O.K. my friend is a 86 year old former B-29 bombardier from the 462nd bombardment group USAAF.
    He uses PC's but he is looking for an iMac that will run X-Plane
    http://www.x-plane.com/
    a flight simulator that works on the Macintosh platform.
    He has been frustrated by being attacked by Hackers before on his PC (I think that he might have gotten a couple of Remote Trojans) and he wants to go back online again of the Internet.
    Will X-Plane run decently on a current iMac?
    How about the low end model will it run this decently?
    I'm looking for individuals who have used this on their iMac to respond preferably.
    I see the requirements for X-Plane here
    http://www.x-plane.com/sysreq.html
    According to this it looks as though any iMac should work.
    I don't think that he can afford a Mac Pro and since he is my friend I don't want him to spend too much money.

    '83Mac,
    I think you might want to reconsider your recommendation. While your friend may not want to go $2200 for the high end model, it seems to me that an extra $300 for twice the video RAM, twice the system RAM, 30% more HD space and a slightly more powerful CPU in the 2.66GHz. 20 in. model would certainly be worth it. 128MB of Video RAM is just not that much any more, and your friend is looking at buying a Mac specifically for x-plane, a graphic intense program. As you may know, and your friend would certainly be aware of, x-plane is in constant development and is always pushing the edge of the envelope as far as current system capabilities are concerned. It would give your friend a system that would be able to handle whatever is in the x-plane pipeline for a longer time to come, and extend his capabilities with the program's current state. Just my two cents.
    Hope this helps,
    Jeff

Maybe you are looking for

  • Select from v$sql_plan in a procedure

    Hi I''m attempting to save plans (from V$SQL_PLAN) into a table using a procedure in schema APPS, but keep getting missing table error, PL/SQL: ORA-00942: table or view does not existI then granted an explicit SELECT to APPS on the V$SQL_PLAN table f

  • How do I update my my itunes on my computer without having to download itunes again?

    I recently updated my ipod to the iso 6 version without my computer, and now it won't allow me to sync my ipod to itunes on my computer. how do I update my my itunes on my computer without having to download itunes again?

  • Acrobat CC doesn't show or print spot colours in a Photoshop PDF

    When I open a Photoshop PDF, with a spot colour channel, in Acrobat CC 11.0.04, the spot colour doesn't show. But it shows when I click Output Preview (in Print Production). The colour doesn't print either. It also disappears when I convert it into C

  • Retrieve All Rows in Disocverer Plus

    Hi, Can we set the 'Retrieve All Rows' option in Discoverer Plus ? I can go to Tools > Retrieve All Rows. But is there any way (like a checkbox) we can set it permanantly so that every user need not to look into it ? Thanks! Yogini

  • Timed events

    Hello Folks, AWR report shows cpu time in top 5 timed events buy on average noticed that 90% of cpu is free most of the times is it normal as below,does anything performance hit may occur due to this CPU time db file sequential read db file scattered