Have to click links TWICE to go to the link...

Anyone else experiencing this? iMac G3, OS 10.4.11, Safari 3.2.1.... I'll be looking at a web page, and when I click on a link, the blue progress bar advances past "http://" then stops. I have to click on the link again to get the link to load. I've gone to "Reset Safari" and reset everything but cookies, autofill, icons, and saved names and passwords. Frustrating to say the least. I've been using Safari 3.2.1 for a while, but don't remember this happening until recently. Any cures?
Mike

Hi,
It sounds like it might be DNS related. You can test this by trying out the DNS settings provided by OpenDNS:
https://www.opendns.com/homenetwork/start/device/apple-osx-tiger

Similar Messages

  • Sometimes have to click links twice in Safari to load a webpage

    Does anyone else have an issue where you have to click links more than once to get them to open a page? What happens is I will click on a link in Safari and it will start opening a new page and then stop. It even happens with links in the Bookmarks Bar. Then if I click the link again it will go through. Any solutions to this?

    I have this same problem, it just started a couple of weeks ago and now the majority of sites I visit require the double click.  It doesn't matter whether they are in my favourites, returned from a search, or entered in the URL search box on Safari.  It's really frustrating as I don't have the problem on my iphone for example if I click simultaneously on the link in favourites on my iPhone and my Mac - it's only a problem on the Mac.
    Has anyone solved this?

  • While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond.

    While viewing web sites the screen suddenly jumps like it is resizing itself. Doesn't matter what site I'm on. Also I have to click links/back button at least 2 times to get it to respond. This has been happening ever since the last update.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved.

    I am trying to load iTunes and keep getting a error 126 and reinstall program.  I have uninstalled and reinstalled twice and keep getting the same error message.  How can this be resolved?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • I have updated Flash player twice but keep getting the icon box telling me to update?

    I have updated Flash player twice but keep getting the icon box telling me to update?

    @zeyoo,
    Please let us know your operating system and browser.
    Please see the following docs that has step-by-step instructions on installing Flash Player:
    Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
    Mac: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html
    Thanks,
    Sunil

  • Why do I have to click everything twice ?

    When is Firefox going to fix this?
    In every version after 3.6, I have had to click twice or "reload" the page. If I close the page and click again or reload the page, it immediately comes up.
    It is not because of problems in my computer. I went into safe mode and disabled all add-ons and got the same result. It happens on 80-90% of the websites. There are a few sites that consistently load immediately but most I have to reload the page or wait for the page to load which can easily take 30 seconds to a minute.
    I have a fast download of 28 and upload of 6. I have a clean computer, plenty of ram memory and have limited programs allowed to activate on start up. I usually have very few tabs open at a time. I've cleared cache and done all the usual things always recommended to do.
    This is very frustrating and it has to have something to do with bugs in changes of versions since 3.6. That version worked perfectly. These latest versions up to the most recent update have been consistently more and more problems.

    I'm with you RJ343, as an ex-software developer from the late 90's, I am appalled at the way Firefox has gone.... i recently upgraded to Windows 7 and Firefox 17 and it is disgusting the number of things that do not work,... and I have to LAUGH MY F**KING HEAD off when I hear geeks and nerds who are barely out of their cyber-nappies moan at me because I prefer 3.6 and they can't understand why i don't love the latest version... SIMPLES > because they are so full of bugs and workarounds and stupid add-ons I have to install just to go "back" to 3.6 and its glorious feature set that has since been ripped apart and hacked to smithereens and replaced with dodgy , sh*te alternatives that I'm supposed to adore ? Same with XP, I am still using it and will continue to use it until MS deliver something of quality that the users want, not what they want to force on me....
    SO back to the topic -- I landed on this page because I have noticed that in FF17 I have to keep clicking everything TWICE, to get the page to load. It happens everywhere, it's as though the focus is not set properly, and the 1st click sets that, and then I have to click again to execute. Certainly I have just registered in order to write this post, I deem it that important, and now that I am , I will have to start replying and posting the myriad of other failures by FF development team in their latest versions,.... what I find the most insulting as I mentioned, is this indoctrination that I HAVE to use the latest versions over the old, tried & tested products like 3.6, because FF will withdraw support or add-ons stop working for the old versions. I wouldn't mind, if the new versions weren't such a croc of shoite and actually worked.
    THIS BUG must be one of the most basic and incompetent of them all. Why do I have to bloody Double-click everything ??? !
    ''"3.6 was almost universally liked by everybody"'' - yes, because it was tried & tested.... obviously the latest generation of developers never heard of the old adage, "If its not broken, don't fix it"... and don't gimme all that crap about security vulnerability,.... that's just an extension of the War on Terror..... Fear is too widely traded for Functionality, and good solid TESTING , which seems to be a thing of the past. The software industry is in a crisis and soon there will be nothing that works and we will all hark back to XP and FF 3.6 as the golden age when software actually worked.

  • After new update, why do I have to click everything twice

    Since the new update, mail is being difficult.  When I try to delete something, it deletes what I click on & 1 to 2 othere messages.
    Plus I have to click on just about everything twice to get it to do what I want.  I rebooted machine but didn't help.  So what now?

    Try repairing your hard drive also your permission with disk utility. http://support.apple.com/kb/HT1782     http://support.apple.com/kb/HT1452

  • Why do I have to click links 2 or more times?

    Since iOS 8 installed I am required to click links multiple times before I am able to complete the action.  Sometimes I have to zoom in before it will take me to the desired link.
    iPad Air iOS 8.0.2

    Do you have an accessibility turned one? Go to Settings>General>Accessibility and check/turn off.
    If not they try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem then it appears you have a problem with the button. See:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Have to click button twice

    hello..
    i have a jspx with three text fields and a command button.
    when the command button is clicked a popup will come up and i have implemented a search page in the popup.
    the user can enter the search criteria so that the results are shown in a table.
    the user can select one record and if he cliks on ok button in the popup the selected record values should get displayed in the main page.
    how ever iam getting the whole functinality done.
    but the problem is i have to click the ok button in the popup twice.
    why is that happening

    Hi,
    Did you fix this problem? Because I have the same problem.
    I also have to click the button twice if select a row from the table, and that row is not on the first 10 rows. (I have to click next to show next 10 rows)
    The button has a af:setActionListener.
    On the mainpage the af:selectInputText has autosubmit=false.
    What causes this problem?

  • I have Ipad 2.  When I touch an icon, a box forms around it and then I have to tap it twice to open.  The box is messing up the touch screen and when I go into some apps they open, update then shut down.

    I have an Ipad2.  All of a sudden when I touch an app or select anything, a box forms around the icon or word and then I have to tap it twice to open it.  So everything I do I have to touch 3 times.  Also now when I open some of the apps, they open, update then close down.   How do I get rid of the box. 

    You might have turned VoiceOver 'on'. See if triple-clicking the home button turns it off, and if it does then cahnge what Settings > General > Axxessibility > Triple-Click Hme is set to.
    Otherwise your need to use the 'touch to select, double-tap to activate' process to go into Settings > General > Accessibility > VoiceOver and turn it off.
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • Why do I have to click delete twice to send emails to trash

    When I try deleting my emails, if it sends it to trash I have to select all and delete TWICE. Sometimes I doesn't even go to trash and it sends all I've selected to delete back as incoming email! Very frustrating. I've checked my settings already under the advanced tab. It's taken me 2 days to delete email, section by section. Any suggestions?

    Hello,
    Is this a POP or IMAP account?
    If you highlight one & use CMD+Delete, does that delete it?

  • I get the following message from Java ... "Component returned failure code: 0x80520012 ", etc. and have to click OK twice to get past it.

    When trying to get to any site that uses Java Script the following pops up . . .
    [Exception... "Component returned failure code: 0x80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIFileInputStream.init]" nsresult: "0x80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "JS frame :: chrome://1clickweather/content/js/utils/filemanager.js :: <TOP_LEVEL> :: line 233" data: no]
    I've deleted all old updates as instructed and running the most recent version.

    If you're having this issue open Firefox, go to Tools on the Firefox tabs at the top of your browser window, and click on Add-ons. This will take you to your Add-ons page. Click on Extensions on the right side of the screen and scroll down to the Skype extension add-on. Click on "Disable" to disable this extension. Once this extension is disabled your problem should be fixed. In my case it repaired the problem.

  • Have to repetitively click links in web pages to open  in Safari

    I notice that in Safari I have to click links in web pages multiple time to get them to open. I watch the progress bar to see if it is loading and look to see if the circle is spinning and it is not. I can wait for a while and still nothing so it is not me being impatient. It does it just about all the time on Facebook and it really seems to go nutz when I click links that are pictures. I constanly empty/clear my cache/cookies and run Onyx to clean up the system and still no luck. The system is completely up to date and has snow leopard 10.6.5 I even put new mouse batteries in just to rule out a clicking problem with it. It's like Safari just does not respond and has to be told twice or more to get going. Does anyone have any ideas or tricks that might help.
    Thanks

    Hi and welcome......
    Login to another user account on your Mac. Try Safari there.
    If you experience the same problem, launch Disk Utility /Applications/Utilities
    Select MacintoshHD in the Sidebar on the left then select the FirstAid tab. Click: Verify Disk
    If Disk Utility reports errors, follow the instructions at this link. You will need your install disc. Using Disk Utility to verify or repair disks
    Also, check System Preferences (Applications folder) - Universal Access. See if you have any accessibility features enabled, in particular, Mouse keys under the Mouse tab.
    Carolyn

  • How can i stop it that i have to click a link 2 times to open it?

    I have to click links twice to open it.
    On the first attempt, it doesnt matter if it is the same tab, another tab or new window, it will just try to load the exact URL where the link is.
    On the second attempt it will open the page instantly.
    Running on DELL Inspiron 9400 - Win XP Media Center - 2bg RAM, nvidia gforce 7900go, intel core2duo

    You can try to disable them all.
    Disable the Java Quick Starter extension: Tools -> Add-ons -> Extensions
    * Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)
    * http://www.java.com/en/download/help/quickstarter.xml
    * http://support.microsoft.com/kb/963707/ How to manually remove the .NET Framework Assistant for Firefox
    It looks that you have had installed a Firefox 4 beta version if you have Testpilot installed. If that is the case then you may still be on the beta update channel and you may want to switch to the release channel. The only easy way to do that is to download and install the Firefox release version and install that version over the top of the current Firefox release candidate.
    You can check the pref <b>app.update.channel</b> on the about:config page.<br />
    If the value of that pref is beta then it is better to download and install the full Firefox 4 release or edit the file \defaults\pref\channel-prefs.js in the Firefox 4 installation folder and change the line to:
    <pre><nowiki>pref("app.update.channel", "release");</nowiki></pre>

Maybe you are looking for

  • How large a second internal hard drive?

    Keep running out of hd space - have been removing cache, etc. to try to keep my available space at least 10%, but decided to purchase a second hd. Was asked how big a one I wanted. Is there an optimum or max size I can use on my G4 (400 mhz, AGP, Mod

  • How can I call BW Report into SAP R/3

    Dear Friends, Is there any way to call a BW Report in SAP R/3. The BW Report is Customer Equipment Revenue . Please Suggest me . Thanks Regards, Ashok

  • How to find the depth in oracle Inventory

    Oracle Apps R12 Order management. Hi All I working in oracle Apps r12 in order management. How to fine the depth of a product in order management. Any help is highly appricatable. thanks & Regards Srikkanth.M

  • FindClass inconsistent behavior

    I am having a very strange problem with the JNI FindClass() method. When I call into my native code, it appears to work for a few times and then fails. I have the following function in my native code: jclass TAGObject::findClass(JNIEnv env, const cha

  • Video Levels out of whack

    Can anyone clue me in as to why my levels look fine in the FCP waveform but not on my external waveform? They are way out of whack; whites at 120 IRE and blacks at -5 IRE, when they are in limits on the FCP waveform. Idiot check has been checked - th