Why do I have to click delete twice to send emails to trash

When I try deleting my emails, if it sends it to trash I have to select all and delete TWICE. Sometimes I doesn't even go to trash and it sends all I've selected to delete back as incoming email! Very frustrating. I've checked my settings already under the advanced tab. It's taken me 2 days to delete email, section by section. Any suggestions?

Hello,
Is this a POP or IMAP account?
If you highlight one & use CMD+Delete, does that delete it?

Similar Messages

Why do I have to click everything twice ?

When is Firefox going to fix this?
In every version after 3.6, I have had to click twice or "reload" the page. If I close the page and click again or reload the page, it immediately comes up.
It is not because of problems in my computer. I went into safe mode and disabled all add-ons and got the same result. It happens on 80-90% of the websites. There are a few sites that consistently load immediately but most I have to reload the page or wait for the page to load which can easily take 30 seconds to a minute.
I have a fast download of 28 and upload of 6. I have a clean computer, plenty of ram memory and have limited programs allowed to activate on start up. I usually have very few tabs open at a time. I've cleared cache and done all the usual things always recommended to do.
This is very frustrating and it has to have something to do with bugs in changes of versions since 3.6. That version worked perfectly. These latest versions up to the most recent update have been consistently more and more problems.

I'm with you RJ343, as an ex-software developer from the late 90's, I am appalled at the way Firefox has gone.... i recently upgraded to Windows 7 and Firefox 17 and it is disgusting the number of things that do not work,... and I have to LAUGH MY F**KING HEAD off when I hear geeks and nerds who are barely out of their cyber-nappies moan at me because I prefer 3.6 and they can't understand why i don't love the latest version... SIMPLES > because they are so full of bugs and workarounds and stupid add-ons I have to install just to go "back" to 3.6 and its glorious feature set that has since been ripped apart and hacked to smithereens and replaced with dodgy , sh*te alternatives that I'm supposed to adore ? Same with XP, I am still using it and will continue to use it until MS deliver something of quality that the users want, not what they want to force on me....
SO back to the topic -- I landed on this page because I have noticed that in FF17 I have to keep clicking everything TWICE, to get the page to load. It happens everywhere, it's as though the focus is not set properly, and the 1st click sets that, and then I have to click again to execute. Certainly I have just registered in order to write this post, I deem it that important, and now that I am , I will have to start replying and posting the myriad of other failures by FF development team in their latest versions,.... what I find the most insulting as I mentioned, is this indoctrination that I HAVE to use the latest versions over the old, tried & tested products like 3.6, because FF will withdraw support or add-ons stop working for the old versions. I wouldn't mind, if the new versions weren't such a croc of shoite and actually worked.
THIS BUG must be one of the most basic and incompetent of them all. Why do I have to bloody Double-click everything ??? !
''"3.6 was almost universally liked by everybody"'' - yes, because it was tried & tested.... obviously the latest generation of developers never heard of the old adage, "If its not broken, don't fix it"... and don't gimme all that crap about security vulnerability,.... that's just an extension of the War on Terror..... Fear is too widely traded for Functionality, and good solid TESTING , which seems to be a thing of the past. The software industry is in a crisis and soon there will be nothing that works and we will all hark back to XP and FF 3.6 as the golden age when software actually worked.

After new update, why do I have to click everything twice

Since the new update, mail is being difficult. When I try to delete something, it deletes what I click on & 1 to 2 othere messages.
Plus I have to click on just about everything twice to get it to do what I want. I rebooted machine but didn't help. So what now?

Try repairing your hard drive also your permission with disk utility. http://support.apple.com/kb/HT1782 http://support.apple.com/kb/HT1452

Why sometimes I have to click twice on a Button?

Hello All.
I have a curiosity. Why sometimes I have to click twice on a button to its to run event?
For example, I have a button that changes the presence of a page for hidden, but I have to click twice on it to run the event.
Thanks

Srini.
Exactly this! My script was with error. Now It´s works very well.
Thanks you for your correct reply.

Why do I have to click the mouse so hard?

Why do I have to click the mouse so hard? Whether I'm using a Bluetooth or a wired mouse, I find I have to click really hard to make it work when selecting text (in any application). This is not good for my wrist. Is anyone else experiencing this?

two types: an old and excellent Apple wired mouse (not mighty) and a Bluetooth mouse (not mighty).

Why do i have to click emails in, all mail, important, inbox, folders?

In my thunderbird account I have inbox, important, all mail, and several folders I have created. Why do I have to click on the same email in all folders? If I look at it in my inbox it should clear as read in all categories, but thunderbird makes me click on each folder and then find each email to stop it from showing as un-read.

I had looked at and thought to do that in the past, but the gmail tab is grey'ed and as such I didn't think I could do that. Your comments made me think it was possible and I needed to find the way and clicked on it. Then out pops the folders under gmail and click, click, click... and no more folders.
Thanks.

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

I have an iphone 5 and cannot send email, server refused user...

I have an iphone 5 and cannot send email away from home. It works fine at home over my home WiFi. But when away from home on Verizon wireless if I send an email I get an error: "the server refused user >Personal email address deleted< your message has been added to drafts". What do I need to do to fix this? My wife has the same problem with her iphone 5.
Message was edited by: Verizon Moderator

Hi Jwhitt
Rats! Emails should work on our network! Let's get this fixed. It may be the way the email is set up on your device. Here's an awesome link on apple's site to help you: https://discussions.apple.com/thread/1288908?start=0&tstart=0 If that doesn't fix the problem I would recommend reaching out to road runners site. They normally have email set up walkthrus.
Please reach out to us if you run into any issues.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Why all of a sudden will my iPad not send emails to one specific address at work but still works to everyone else? just keeps saying "failure to send"

Why all of a sudden will my iPad not send emails to one specific address at work but still work to everyone else at work?

Contact the person by telecon. Their email address may have changed.
 Cheers, Tom

Why do some have to click twice on floating audio control to start sound?

We are finding that for some users, a floating audio control within acrobat reader has to be clicked twice to start the audio. When the audio button "Play Audio" is clicked, the floating audio control is opened and the play button is activated but the sound does not start on some machines. The pause button is available to click, indicating the play button has been activated. No sound occurs, and the progress indicator does not move. However, if I click the pause button and THEN click the play button, the sound starts and the progress indicator begins to move. So far Adobe support has not been able to answer this issue. Has anyone else seen this happen? Problem seems to happen on about half the computers we have tried it on. Thanks in advance for any ideas and/or solutions.

Same thing - have to click twice even though default settings.

Have to click button twice

hello..
i have a jspx with three text fields and a command button.
when the command button is clicked a popup will come up and i have implemented a search page in the popup.
the user can enter the search criteria so that the results are shown in a table.
the user can select one record and if he cliks on ok button in the popup the selected record values should get displayed in the main page.
how ever iam getting the whole functinality done.
but the problem is i have to click the ok button in the popup twice.
why is that happening

Hi,
Did you fix this problem? Because I have the same problem.
I also have to click the button twice if select a row from the table, and that row is not on the first 10 rows. (I have to click next to show next 10 rows)
The button has a af:setActionListener.
On the mainpage the af:selectInputText has autosubmit=false.
What causes this problem?

Why do I have to click on all of my flash components before I can navigate?

Without modification to the code...the component is there but
it needs to be clicked on before I can navigate the site. Should
Dreaweaver not know how to properly insert the code necessary allow
the flash component to view properly? What am I missing? I know
this is a Deramweaver forum....but the problem does not not seem to
be with Flash, it seems to be in the code that Dreamweaver creates
when the Flash component is inserted.
I have been able to find a work around to my problem but
surely it is not what everyone out there is doing. If
so...Dreamweaver or Flash has a serious bug!
I created a site a while back and everthing worked fine. So I
copied some code from that site to fix the new one. However even
after copying the code I still have to modify it to make it
work..(the modifcations are obvious.) This is suely not the way it
is done all the time.
I have three questions:
1. Why did everything work fine with the first site with no
modifications?
2. Why do I have to copy the code to the other site after
inserting the Flash component?
3. Why does dreamweaver not do it for me? (it did everything
right the other time, but now it doen't even work in the previous
site)
I feel like I must have changed a setting somewwhere that I
did not realize would effect this...Perhaps it is a Dreamwweaver
thing.
PLEASE HELP!

It's IE-only behaviour as a result of changes Microsoft made
several
years ago to their browser, regarding how Active Content
(Flash, Quicktime
etc)
is handled, after losing a high profile court case.
http://blog.deconcept.com/2005/12/15/internet-explorer-eolas-changes-and-the-flash-plugin/
Background:
http://en.wikipedia.org/wiki/Eolas
See also
http://www.adobe.com/devnet/activecontent/
If you're running Dreamweaver 8.0.2/CS3, the fix is already
built into DW's
interface.
If not, try
http://blog.deconcept.com/swfobject/
If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"South Beach" <[email protected]> wrote in
message
news:[email protected]...
> Without modification to the code...the component is
there but it needs to
> be
> clicked on before I can navigate the site. Should
Dreaweaver not know how
> to
> properly insert the code necessary allow the flash
component to view
> properly?
> What am I missing?
>
> I have been able to find a work around to my problem but
surely it is not
> what
> everyone out there is doing. If so...Dreamweaver or
Flash has a serious
> bug!
>
> I created a site a while back and everthing worked fine.
So I copied some
> code from that site to fix the new one. However even
after copying the
> code I
> still have to modify it to make it work..(the
modifcations are obvious.)
> This
> is suely not the way it is done all the time.
>
> I have three questions:
> 1. Why did everything work fine with the first site with
no
> modifications?
> 2. Why do I have to copy the code to the other site
after inserting the
> Flash
> component?
> 3. Why does dreamweaver not do it for me? (it did
everything right the
> other
> time, but now it doen't even work in the previous site)
>
> I feel like I must have changed a setting somewwhere
that I did not
> realize
> would effect this...Perhaps it is a Dreamwweaver thing.
>
> PLEASE HELP!
>

Why do I have right click to open safari?

Safari icon is in my dock. But I have to right click it to open safari. I do not have to right click to open anything else in my dock.

Delete com.apple.dock.plist
Click on an empty spot on the Desktop to activate Finder.
Hold the option key down and click”Go” menu in the menu bar.
Choose “Library” from the drop-down.
Library > Preferences
Look for com.apple.dock.plist
Right click on it and select “Move to Trash”.
Restart the computer. Try launching Safari.

Why do I have to click connect next to 802.1X every time?

My certificates are trusted. My WPA Enterprise profile has the proper credentials. Ask to join new networks is checked. When I unplug my ethernet cable and use the wireless networking environment at my workplace, I'm always prompted to choose the network from a dialog that pops up. Whether I choose the network I always use or whether I cancel, my IP address gets self-assigned until I go into the Network prefpane and click "connect" next to 802.1X. Why do I have to do that every time?

Open iTunes preferences and go to the Store pane, then uncheck everything, esp. the Always check for available downloads.
oh yeah, VERY IMPORTANT... forgot to tell you that you have to be signed in to your itunes store account to make these changes, or to even see what the current settings are. If you are not signed in to your itunes account the whole pane will be dimmed and will show all boxes unchecked... HOWEVER, once you sign in to your account and open the store pane, you will be able to see the current settings AND the "Always check for available downloads box is checked by default.
Message was edited by: ProMaxed

Why do I have to click open in new tab or window for my gmail links to open?

Hello, When using Gmail in my Firefox web browser every link I click on to open goes to a new tab with a blank page and the following url - https://mail.google.com/mail/u/0/?ui=2&view=bsp&ver=ohhl4rw8mbn4. However, if i right click and open in a new tab/window Firefox will then open the link and send me to the page the link was intended to go. It does this with every link I try and open from Gmail.
I tried using IE and Chrome and when I click the link within the email body, it opens it up with no issues at all.
Firefox is my default browser so I would like to not have to do this all the time. Anyone know what is causing this?
I am using the latest version of Firefox and Windows Vista Premium.

Sometimes we see odd behaviour due to a misbehaving add-ons. I suggest starting by disabling all of your add-ons (Tools->Add-ons) to see if any of them are the culprit.

Why do I have to click delete twice to send emails to trash

Similar Messages

Maybe you are looking for