Having been trying this forever need help
Ok so I need help and this may sound like a stupid question but I am beyond trying to figure this out.
So trying to set up a new webpage how do you go about setting it so it opens on anyones computer the same size? I have used the html templates in dreamweaver...and thats great but I am trying to expand my experience and try more things....
I am using CS4 and I really need some good help...
Thanks
You do it with CSS code.
For a Liquid Layout that fills browser viewport.
body {
width: 100%;
For a Semi-Liquid layout that fills viewport with restrictions to keep the layout from looking ridiculous on ultra wide or ultra small displays.
body {
width: 100%;
min-width: 800px;
max-width: 1280px;
Fixed-width and centered on all displays greater than 990px.
body {
width: 990px;
margin: 0 auto;
Adjust numbers to match your target audience.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Similar Messages
-
I'm uploading a photobook I made to be published. I need assistance in getting it to apple. The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading. I have been trying all night. Help!
Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry. -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
hello
i´m trying to do a proyect that requires modulate and demodulate a text in QAM. i´ve been trying this for days but i can´t come up with a solution, I can not retrieve the text I am modulating and i do not understand why. I am new to using Labview and would appreciate some help.
if anyone can help that would be great.
i have attached the vi that i´ve done.
thank you very much
Attachments:
intentoproyectocom2.vi 78 KBI beleive they used the same concept that they did in iOS. One folder deep. If you think they should implement somehting more, then please use the feedback links in the forums FAQs to leave your comments and suggestions.
Jason -
Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help
Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.
-
I am new to this but need help. Lion and iCloud have never worked on my desk top or MacBook Pro. Slow or Stop! Is there any way to fix the problem?
We need more information. I'm not sure what you mean by both Lion and iCloud have never worked.
-
I had itunes downloaded but i needed to update it inorder to transfer music to my iphone 3g. It would not let me, after several trys i just uninstalled it. then i went back and tryed to download the newer version. I clicked download now and it went to the page saying it has downloaded. So then i searched the progams and it was not there. At the bottom of that enternet page it asks if having trouble click here. I clicked and it said to change pop-up settings to medium, so i did, still does not work. i change it to low, still nothing. I have been trying for 3 days now. please help.
Did you try the suggestions mentioned in this article? iOS: Device not recognized in iTunes for Windows
Did you already try to remove all Apple related software and install iTunes again, as described in this article?
Removing iTunes, QuickTime, and other software components for Windows Vista -
Hello,
I am a complete newbie at this Itunes stuff and I have some very basic questions. If somebody would be willing to help me out I would appreciate it. So I have loaded Itunes on my PC. I then put in a cd that my friend burned a ton of songs on for me thinking that the CD would automatically appear in Itunes where then I could move it to my Itunes library. However the CD doesn't appear in Itunes and the only way I can play it is just through Windows Media. Any idea on how to get this to my Itunes library?
In addition, sometimes when I try to play a song in Itunes it says that it can't find the file and asks if I want to locate it. I saved the burned CD in the Itunes folder on my computer but it still didn't seem to work. Any suggestions?
Thanks for any help you can give.
ChrisI don't know much about CD not working problems, someone else will probably chip in.
As a workaround while you are sorting it out, you can import tracks with Windows Media Player. You need to set the format to MP3 in the WMP options. On the latest version you have to click on Rip to find it. I don't remember where it is on the earlier version.
Once you have imported the tracks find the name of the folder they are in, then open iTunes and click:
File>Add folder to library
Before you do this, you need to decide if you are happy to leave the tracks where they are or if you want to make a copy of them in the iTunes Music folder. You can set this in
Edit>Preferences>Advanced>general
There is a check box labled "Copy files to iTunes Music folder when adding to library.
iTunes will work OK either way.
On the CD thing - you should find "Run CD diagnostics" on the help menu - you could post the result here.
(I am using Version 6.0.5 so things may not be quite the same on your version) -
I need help to be able to see if I can fix this or something.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT5538 I dont really get this i need help setting some things up on my Ipod.Can you help?
I need help setting up my Imessage and FaceTime.I have tryed and its not working.
iOS: Using FaceTime
iOS: About Messages
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime -
Whenever i try and send an imessage to someone that has an iphone it gets stuck at times and won't go through. I then have to send it as a basic text and then it will respond message failed to send what should i do when it does this i need help
The use of iMessage depends on both the sender and the receiver having an active data connection. If either of the two connections are interrupted, the message can fail. The sending of an iMessage differs from the sending of an SMS, and if you are having SMS failures, that would be a carrier concern.
-
As well as this I no longer seem to have a digitally signed driver. I have no idea if this is linked to the problem as well.
Can anyone help?
thanksThanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
Im new to this and need help with putting a password on my wireless
I've had my linksys router for a few years now and recently have been asked to secure it so no one else in the neighborhood can connect to it but me but Ive never known how and I cannot find the installation CD for it. I have a model number# WRT54G. I tried searchin the forums but couldn't seem to find one I could understand. If anyone could please offer me some help on how to simply put a password on it so just my computer and the others in the house can access the wifi thatd be great. Thanks
To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or "Wireless Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption. -
My apple ID has been disabled. I need help enabling iTunes .
I believe my apple id was tampered with. What do I need to do to be able to use it so I can down load apps?
I am having the same problem as you. I can use my appleID to log in to this forum or iCloud, but I can not use it to download apps or update apps I have. I have reset my password 7 times over the past few weeks, it never helps. Clearly the problem is not actually my password, but some compatibility problem between iOS5, Lion, iCloud, and iTunes. Too many products rolled out at the same time, without proper attention payed to compatibility. It is getting quite frustrating. I'm waiting on the miracle update that will actually fix it...please soon!
-
Please help me I'm lost it says canceling sync after only some songs download I don't know what the problem is I tried to fix it but nothing works I don't know what to do
Hello there, Savagejacob.
The following Knowledge Base article offers up some great steps for unexpected disconnects of your iOS device when syncing:
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Check connections
Try the following steps to check the connection between your device or computer. You might need to do only one of these steps to resolve the issue, so test your connection after each step.
See if the cable connection at the device or computer has come loose or unplugged.
Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead.
Close any virtualization apps (such as Parallels or VMWare).
These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
Restart your computer.
Restart your iPad, iPhone, or iPod touch.
If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
Update to the latest version of iTunes if you have not already.
Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device.
If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
You call this Nokia Support?????
Having problem with proximity and brightness sensors-not working after updating with cyan. Can anybody help? Stop offering me the nokia recovery tool.it does nothing.after using the tool or hard reset sensors working for an hour and just stop. I want
-
I'm using PSE7, WindowsXP, and Epson printers. I tried all 3 color handling options in PSE7: [1] Printer manages colors, [2] Photoshop elements manages colors, & [3] No color management. I get good color prints with option [1] and bad with options
-
1st of the Quarter for yesterday.....
Morning everyone, I need to write a bit of code that will retrieve the first day of the quarter, based upon yesterday's date (ie 1st of the Q for yesterday would be 01/04/2007). I have managed to achieve this using the following code: select case to_
-
Regarding passing of the modified data back to internal table form alv
Hi, My requirement is i hav a fld in my alv grid checkbox which iam checking when i output the list on the alv grid and I hav to execute an action on all the checked rows the poblem is even iam checking the checkbox it is not being passed back to
-
I see that "Trust" a computer on iOS7 is indefinite (learned). How do I undo that on a computer that I want to use for charging but do not want to trust?