Having issue when we try to print more than 300 container labels

Hi Gurus,
We are having issue when we try to print more than 300 container labels. Once it reaches 300 it starts to jump the sequence and we are not able to complete all the tickets if itu2019s more than 300.
Regards
Rajib Pathak

dear friend,
first, i recommend to analyse the spool request and discuss it with your basis/technical guys (use SP01)
second,
you would try to run t-code SPAD for your output device and check out the checkbox "Process requests sequentially" (ON)
regards,

Similar Messages

HT204053 I having issues when i try to play my music in itunes can't see all my d/l purchase i have since yrs now

Why can't i play my music? i put my itunes on so i can listen to it on the computer and i sign in but i do not see my music or i can't do nothing? somethin popped up iclouds? i'm dont have no clue about icloud?

sharonthome wrote:
I had itunes on my old eMac, now I have a MacBook Pro. itunes says I have $19.70 in my account, but when I try to buy a song all that comes up is my credit card.
Sounds like you have abn expired credit card linked o yoru accopunt.
View your iTunes account payment info and select None for the CC.
You may need to first add a valid card number before you can remove it.

Problem with Query when I try to do more than one group

Hi Sap Experts,
Hopefully somebody can suggest a way to make my query work a bit better. I have built a stock warehouse query which prompt for item groupcode
see below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T0.[ItmsGrpNam] >= (N'[%0]' ) ) AND (T0.[ItmsGrpNam] <= (N'[%1]' ) ) AND (T2.[OnHand] > (0 ) ) ORDER BY T2.[WhsCode]
At the moment this is working fine when I select to and from a group with the same ItemCode- however I now would like to to add 2/3 itemgroupcodes to the same query.
So at the moment if I run this - it promts for the Item Group Code - I enter the to/from itemcode - the query gives me a breakdown of the item group , warehouse location for that item and if there is stock on hand for each location
However I would like to be able to select 3 distinct Item groups but don't see to be able to when I adjust the query - can you add multiple parameter to add the 3 distinct itemgroup codes
If any one could suggest a way to alter the query to allow to choose 3/4 distinct groups either using the [%1] selections or simply built into the query that would be great
thanking you in advance for any suggestions you may have
Paul

Hi Gordan,
I have been playing with the query and the conclusion i have come to is this - this way works selecting one itemgroupcode
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' ))
This query works by it self and selects the Item Group Code that I need to see.
However I can't seem to get it to work If I try to add a further group code? see code below
SELECT T1.[ItemCode] AS 'Item No.', T1.[ItemName] AS 'Item Description', T1.[BuyUnitMsr] AS 'Purchasing UoM', T1.[AvgPrice] AS 'Item Cost', T2.[OnHand] AS 'In Stock', T2.[OnHand] * T1.[AvgPrice] AS 'On-Hand Qty*Unit Price', T1.[PurFactor1] AS 'Purchasing Factor 1', T2.[OnHand] * T1.[PurFactor1] AS 'On-Hand*Purchase Factor', T2.[WhsCode] AS 'Warehouse Code', T3.[WhsName] AS 'Warehouse Name' FROM [dbo].[OITB] T0 INNER JOIN [dbo].[OITM] T1 ON T1.[ItmsGrpCod] = T0.[ItmsGrpCod]   INNER JOIN [dbo].[OITW] T2 ON T2.[ItemCode] = T1.[ItemCode]   INNER JOIN [dbo].[OWHS] T3 ON T3.[WhsCode] = T2.[WhsCode]   WHERE (T2.[OnHand] > (0 ) ) AND (T1.[ItmsGrpCod] = (N'130' )) AND (T1.[ItmsGrpCod] = (N'135' ))
It just seems to fail even though I know there is data for both groups - Have i missed something in the code?
I would like to be able to add 3 further group codes to the query as it will be for a report showing stock on hand once a month in the various locations
Any suggestion as to who to tweak the addtional groups
thanks
Paul

Does anyone know how to print more than one picture on a page?

I am having trouble finding a way to print more than one image per page with Aperature? Do they have other options like photoshop?
Jim

What I have done is use the book pages with my own layout.
The problem with this is you are hit and miss to get exact final dimensions for each of the images. You need to print and then measure. I used my laser printer to not waste ink and paper, then the Lineups are ok. Once you have your template sizes correct, then you are fine and it is repreducable for any picture package combo you want.
I have fussed with it so I can get 2 5x7s on a page with the correct dimensions.
The photobox property popup has aspect ratio, alignment and should also have a DIMENSION option. This would be super as the rest of the book page layout is pretty flexible.
Good luck.

My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

HT1349 Having issues when try to burn a disc. It says "checking media" but just sits there. I know drive is working because I can put in a purchased cd and can import it into my library. It said something about I should "calibr

Having issues when try to burn a disc., which I never had an issue doing. Yesterday when I tried to burn a playlist it says "checking media" but just sits there. I know drive is working because I can put in a purchased cd and can import it into my library, but now it just sits there and hums until I maually eject the disc.Before all this started it said something about that I should "calibrate disc", since then it won't let me do any burning. I can't find any options in " preferences to change anything except the burn speed. Any suggestions? Tried rebooting, tried using my wifes iTunes on same comptuer.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

When I try to print my book I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images.

When I try to print my book, I receive the following error message: One or more of the images in your book are not presently available at full resolution. Please reconnect to these files by mounting the volume(s) containing the original images. I don't understand what this means since all the photos are in the book. Can someone please clarify?

When you look at the images in the browser, do you see any arrow icons on your thumbnails? Like these:
When you import your images from a folder on your system drive, you have two ways to import:
Managed: Import and store the images in the library
Or referenced: Leave the images in the folder outside the Aperture library.
This is controlled by the "Store Files" settings in the Import panel:
If you did not set "Store files" to "In the Aperture Library", the originals will stay in the folder outside.
The error message you get, suggests that Aperture assumes the original files are in a folder outside the library.
Select one of your images in the Browser and use the command "File > Show in Finder" - is this command available or dimmed out?

I also am having problems creating cd cover. When I try to print onlt text comes out picture art is 1 big black square. cannot load library error shows up 126. Do anyone have a solution for this problem?

Having problem creating cd cover.When I try to print one out only text print no picture. Error message appears "cannot load library"LXBBPRP,DLL Default error126. Anyone have a solution to this problem?

One other note I do have parallels installed but not running on both machines.
Make sure on both machines that even if Parallels is not running that the two VPNs it creates in System Preferences > Network are set to Off.
Also make sure that in System Preferences > Sharing that Internet Sharing is nnot ON.
Later you will have to adjust the Parallels setting to NOT Share the Mac IP.
10:18 PM Sunday; June 1, 2008

Why does FireFox truncate part of an E-mail of more than one page when I try to print it out? How can I sent an E-mail blaet to several but only show one name o

When I try to print out an E-mail that is longer than one page, part of the 2nd page is truncated. I then have to go to Safari to print out the entire E-mail without part of it being truncated.
When I have multiple E-mail addresses on a single E-mail, how can I send the E-mail so that each recipient only sees his/her name and E-mail address rather than everyone else that the E-mail is addressed to?
Please advise.
Thank you.
Bill Leete

Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

Word processing quits when I try to print

Thank you for taking the time to read this. Thank you even more if you can help me solve this problem!
First, the basics: I'm working with an older iBook G3, using OS X (10.4.2). The problem happens with both Word:Mac (2004) and AppleWorks.
The problem: When I try to print a document from Word or AppleWorks, the application just quits. There are no error messages. I can print from other applications (Adobe InDesign, for example)
Some background: Earlier today I was having some issues with my printer (HP Photosmart C5180 All-in-One) so I uninstalled and then reinstalled the software. Prior to my doing that, I was not having a problem printing from Word. (Hadn't tried AppleWorks as I generally don't use it.)
Thanks for any help. I really appreciate it.

Hello Sarah,
Can you describe the details of your system?
What version of Mac OSX?
What Printer?
Do you have the latest printer drivers?
Rayne

Pages shuts down when I try to print since i upgraded to Mavericks

I upgraded last week, now when I try to print out of Pages, Keynote, Safari, the programs shut down. I'm printing over a network to a Konica Bizhub C203. All other programs print no problem, its only the 3 mac ones that will not print. Anyone else having this issue? Any known fixes?

There are several bizhub threads here. See the "More Like This" sidebar to the right.
Also, see
https://discussions.apple.com/message/23614478#23614478#23614478#23614478
for more information and a workaround.
Hope this helps.

Photoshop CS5 (under Windows 7) crashes when I try to print

Hi,
I am running 64-bit Photoshop CS5 Extended upgraded to current version (12.0.4).
When I try to print, every single time, I get the following error immediately:
     > Adobe Photoshop CS5 has stopped working
          Windows is checking for a solution to the problem
and then shortly after
     > Adobe Photoshop CS5 has stopped working
          A problem caused the program to stop working correctly.
          Windows will close the program and notify you if a solution is available.
Quite infuriating. My printer works fine. I can print photos to it from Lightroom no problem (which, in this occasion, I had to do - saved from PS, imported to LR, then printed... very efficient!!).
I note there are other posts on this but they seem to be mostly Mac and also many seem to cure by upgrading to 12.0.4.
I am a relatively light user (keen amateur not professional) so I don't use PS regularly. However this also means it is pretty much an out-of-the-box install since I don't tinker with it either. It's so long since I last used it I can't remember if I had this problem last time - I vaguely recall having had it sometimes but not others. Doesn't seem to matter whether the file I opened is a JPG or a PSD (the only two I have tried).
Any help out there?
Thanks
Alastair

So if we have say, 10 or so printers with 10 different drivers and every application works with every printer, including Photoshop.
And we apply an update to Photoshop.
And now Photoshop crashes everytime we print regardless of what printer we pick, but a previous version of Photoshop is still able to print.
Do all the printer drivers suddenly have bugs . . . or could it possibly be the common denominator, i.e Photoshop, that has the bug?
Everyone who is having this issue of Photoshop crashing when you try to print after a change/update.
Try this:
DO NOT MERELY ATTEMPT TO PRINT EXISTING FILES.
Start a fresh document and attempt to print that.
If you can print any file created AFTER the change/update but cannot print any files created BEFORE the change/update, this indicates that Photoshop is retaining file attributes that are not compatible with printing after the change/update.
How can these attributes be replaced with compatible attributes? Changing the default printer as mentioned above may do the trick.

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!

It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

HP 5510,windows 7, new setup of printer, "unable to communicate with printer" when i try to print

HP 5510, Windows 7, new printer, just picked it up!, "unable to communicate with printer" when I try to print a page, all network conections check out OK with Print Diagnostic Utility.

Are you receiving any error messages when you print from the desktop? Its possible the print spooler is having issues which is not pushing the jobs to the printer. Lets restart the print spooler to get any old jobs that could be stuck in the queue removed.
1. Press the start orb in the bottom left on the screen.
2. Click on "Run"
3. Type "services.msc" (without the quotes)
4. Locate the Print Spooler service in the right column
5. Click restart on the service link on the left
After it restarts the spooler go ahead and retry printing. Let me know if this works.
Thanks,
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Photosmart 5510d printer keeps saying "busy" when i try to print something but nothing prints.

I just bought a HP Photosmart 5510d printer and installed it on my Mac to work wirelessly. It seems to be working when I do a test print but when I try to print a document, the printer says "busy" and doesn't print at all. Any advice? Thanks!

Sorry to hear about your troubles. Could you post a little more information about your setup? Here is a quick list that should allow us to troubleshoot the issue.
What verion of Mac are you using (10.4, 10.5, 10.6, 10.7)?
How are your trying to print (wired, wireless, from mobile device)?
Thanks!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Having issue when we try to print more than 300 container labels

Similar Messages

Maybe you are looking for