Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Anyone have a clue how I can open or convert the Adobe Connect FLV file?

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Similar Messages

Having issues accessing my E-Book from Adobe Digital Editions

Hy to all, in trying to open my e-book the attached message shows up???
Any ideas? Suggestions?
Thanks

Yes: ask in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions
This is the Reader one.

Good Morning, I am having issue downloading ebook. Getting message "Adobe digital edition 4.0 has stopped working" with problem event name : APPCRASH. Any ideas how to fix this?

Good Morning, I am having issue downloading ebook. Getting message "Adobe digital edition 4.0 has stopped working" with problem event name : APPCRASH. Any ideas how to fix this?

Do you have the most current dirver for the printer?

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

Using windows vista with two users and I can only open books with adobe digital editions on one account?

using windows vista with two users and I can only open books with adobe digital edition

You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

TURBOTAX 2014 CD DOES NOT PERMIT OFFLINE PRINT OR SAVE TO PDF. YOU CAN ONLY SAVE TO PDF OR PRINT IF ONLINE. BIG SECURITY ISSUE. INTUIT IN WSJ ARTICLE BLAMES APPLE, SAYING APP STORE SOFTWARE RESULTED IN THIS. TRUE?

Starting this year, Turbotax CD/download versions will not permit people to print tax forms when offline. If you try to print while not connected to the Internet, you receive the warning “There was a problem connecting to Intuit’s Secure Print Service. Please check your Internet connection or try again later.” Indeed, Paragraph 9 of the Intuit Software End User License Agreement states: "You may save your return as a PDF file and understand it may be processed on Intuit servers, not as part of the Software."
Even if you wish to protect your data by not exposing it to the Internet, Turbotax will not let you without sharing your entire return first with them. They prohibit you from only printing locally on home, cable-connected printers.
The result of this is that people who tried to be safe by never going online with tax data, are this year being forced by Intuit software to expose all their sensitive tax information files to the Internet and Intuit print server, even though they do not wish to. Turbotax is putting you at risk.
On Feb 19 the Wall Street Journal quoted an Intuit spokesperson blaming Apple: According to Julie Miller, an Intuit spokeswoman, TurboTax made the change “because the Mac product requires a special, third-party code library to support offline printing.” And she says, “based on Apple App Store guidelines, we could no longer distribute the third-party library with our software.” She said the change in the TurboTax Mac software was first made for 2013 tax returns, but last year customers had the option of printing returns without being connected to the Internet.
So is Apple to blame that I now have to expose my sensitive tax data to Intuit just to be allowed to save to PDF on my hard disk? And it's all Apple's fault?
Can anyone clarify this?

Thank you for this an the other posts. Particularly for Barney,
I have just discovered that Turbotax actually permits you to print (and save to PDF) documents from the Help
Center built into the program, even when you are OFFLINE. Works just like normal printing is supposed to. It just won't let you print actual tax forms. So I guess they were willing to violate Apple’s rules when you print information from their help center offline, but you just can't do the same with your own tax forms. Clearly this shows that what Intuit told Forbes was a fabrication.
They do in fact have the proper code in the program for printing and saving to PDF. They just deny you usage of that code for printing your tax returns, which they want to copy. I don’t think there can be any doubt about what they are doing. Surely they are not deceiving apple by allowing the limited print function?
We can only hope that a brave journalist will challenge them on this, since Intuit will not respond to customers.
Thank you for any views on this points.

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HT1848 I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?

If you see Devices in the big list on the left-hand side of iTunes, it should show the name of your iPhone right below it. You can right-click (or hold ctrl and left click) on the name of the iPhone there, and choose "transfer purchases from iPhone".
If you're on iTunes 11, you won't see the big list of the left until you go to the View menu at the very top (where you see iTunes/File/Edit/View/etc) and choose Show Sidebar. Then do the same thing: right-click or ctrl and left-click on the iPhone's name below Devices and "transfer purchases from iPhone".
It'll ask you to authorize the computer for your Apple ID if you haven't yet; to do that, you just type your Apple ID and password in when it asks. If it says you are not authorized but doesn't automatically give you an option to do so, then you can go to the Store menu at the very top and choose "authorize this computer".

Fedex can only be used with dreamweaver using metric, not pounds (lbs)

Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
This as per their tier 2 tech suport.
They say I should just convert to metric, no joke!
Any ideas would be greatly appreaciated?
Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
Their note to me:
Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
              Silviu Ghimposanu (Adobe Business Catalyst Support)
              Apr 14 15:23
    Thanks for contacting us Michael
Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
He have added this to our internal bug tracker to be fixed for one of the future releases.
    I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
dimensions in pounds and not in KG
    Sorry for this inconvenience!
Kind regards,

If you're in US it will be in pounds. If your site is set any other country
in the rest of the world it will be metric. So BC or as you call it
Dreamweaver will look at the site country, which you set when creating the
site

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

Item category S can only be used with account assignment category

Hello Gurus,
When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
for my plant and material.
Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
I think there is a problem in plant or a material.
Please help me.
BR

Hi,
How you are creating PO ,so that you have error "Item category S can only be used with account assignment category"
Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for with account assignment category.
Cross check transaction variant or screen variant used for your PO creation!
Regards,
Biju K

How to import color palettes from Adobe Kuler to muse ?

How can I import color palettes from Adobe Kuler to muse ?

I've looked for an answer to this but no luck so far. Until Adobe add this feature to Muse you could try this work around:
1. Import a Kuler .ase file into Illustrator (or Photoshop too I guess)
2. Select the desired colour in Illustrator and note the RGB values
3. Create new swatches in Muse and use the noted RGB values rather than the colour picker.
Hope this helps.
Rob

Having a problem downloading an app from adobe cc exhange panel

I am having a problem downloading an app from adobe exchange panel. It allows me to log in but then just keeps trying to download. it looks a little like a bicycle wheel turning and turning
Elizabeth

Adobe aren't much help either. What you have to do is open a web case with the Adobe support team.
I've been waiting since 25/09/09 for them to reset my account which is what you have to do to get it working again.
I know this isn't much help but its a start.
Hopefully it works for both of us if they ever reset the account.

Can only select items with direct selection tool

I have been working on a design: one layer, with multiple groupings, nothing is locked. I'm trying to select the items with the selection tool, but can only select items with the direct selection tool (which is very inconvenient in this case). I can select the text with the text tool, but that really serves no purpose in my case. Anyone have any ideas as to what's going on? When I was working on it yesterday, everything was fine with all the tools. Thanks in advance.

Imcookin,
It may be a corruption of preferences, or an issue outside Illy.
You may try to close down and just restart, or close down and restart pressing Ctrl+Alt+Shift/Cme+Option+Shift, or close down and use the suggestions in Move the folder or, if none of those suggestions help, have a look at the list in Other options

GroupLayout can only be used with one Container at a time

Dear all,
I am a beginner so please don't throw rocks at me...
I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
Here is the code of the button from the main frame to start the second one:
private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {
        // TODO add your handling code here:
        CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
        custGUI1.setVisible(true);
}When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
How should I handle this?
What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
Thank you
With respect,
Don
Edited by: don1983p on Dec 16, 2008 2:21 AM

AndrewThompson64 wrote:
There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Similar Messages

Maybe you are looking for