Having multiple Stored procedure in a single Business Service in OSB

Hi,
Please let me know is it possible to have multiple Stored Procedure inside one business service in OSB.
Regards,
Abdul

Hello Abdul,
It is not possible to serve multiple stored procedures/functions with one business service because one business service can be based on one adapter only and one DB adapter can interface one DB component only. You may have one stored procedure which internally makes call to all other procedures as per your requirement and from OSB, call this single stored procedure using one business service.
Regards,
Anuj

Similar Messages

Having problem in passing the values in business service in OSB.

hi ,
in my requirement i have to write a string in AQ , i have created a AQ adapter and a business service related to that now i have a variable which contains the string i have to pass, how i can paas this variable in my business service using service callout or publish ??
Edited by: 990437 on Mar 6, 2013 1:36 AM

I checked the Business Service using the test console . It worked fine .
There is no listener on the AQ . The test messages and the messages sent using the service callout are still there.
I have logged the body variable and I can see its fine.
The thing is Service Callout works but at the end throws an error :
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884743> <BEA-000000> <Started Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <End of Payload Translation...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <Extracting Header Properties from XMLRecord...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884744> <BEA-000000> <No recipients specified...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884746> <BEA-000000> <Successfully completed outbound interaction to queue - JOB_QUEUE>
<[ACTIVE]ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884750> <BEA-000000> <Closing Interaction...>
<[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-01FF0221C1FA5B53DDE4> <0000Jp3_I_3ATOELn6k3yZ1HE3Q8000002> <1362640884751> <BEA-380003> <Exception on TransportManagerImpl.sendMessageAsync: unchecked exception:, java.lang.NullPointerException
java.lang.NullPointerException
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:75)
at com.bea.wli.sb.transports.jca.codec.JCAAbstractMessage.getPart(JCAAbstractMessage.java:31)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocCodec.marshallBody(SoapDocCodec.java:67)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapCodec.marshall(SoapCodec.java:192)
at com.bea.alsb.ws.codec.internal.runtime.soap.SoapDocClientCodec.marshall(SoapDocClientCodec.java:58)
at com.bea.wli.sb.transports.jca.codec.JCAClientCodec.createResponse(JCAClientCodec.java:57)
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:168)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:574)
at sun.reflect.GeneratedMethodAccessor563.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)......................................
On the other hand the Publish Action with either QoS mode does nothing . No exception , No messages in the AQ . It does not do anything at all.

In OSB, Single business service to handle multiple Stored procedures

Hi,
In OSB we have a package and within that there are 8 overloaded stored procedures. DO we have to create 8 business services or is it possible to create single business service and pass differrent messages to it.
Thanks,
Vinoth

Hi Vinoth,
You have to create 8 dbadapters and hence 8 business services. Better you create one stored procedure which internally calls these 8 stored procedures on the basis of conditions you have and create only one DB adapter and hence one business service to invoke this sinlge stored procedure.
Regards,
Anuj

Multiple stored procedures on report

I linked two stored procedures on Crystal Report using primary keys but have been having login issues when I migrated from Development to Test environment. I'm NOT using SubReports.
I want to know if it is even possible to use multiple stored procedures on Crystal Report without using SubReports? I'm using Crystal Reports 10 and SQL Server 2008

2) CR 10 does not support MS SQL 2008. Check the supported platforms documentation. I Recommend upgrading to CR 2008.
-- Crystal Reports using single stored procedure and sub reports worked fine with SQL 2008
That is kind of like saying; my Ferrari was not designed for dirt roads. And it was pretty good on the dirt back lane. But when I went on a mountain logging road, it broke.
Anyhow. From your description it also looks like this works for you in the designer ("development" environment), but not once you get it into Enterprise. If that is the case, post your query to the [Business Objects Enterprise Administration|BI Platform; forum, see what they say.
Ludek

How to call multiple stored procedure from same DB Adapter

Hi,
I want to invoke 3 stored procedures from my message flow in BUS . I created a DB adapter and invoked 1 successfully . Now I don't to configure 2 other DB adapters for calling other 2 stored procedures . I want some how to be able to call the other 2 from the first DB adapter only . Somehow I need the flexibility to have procedure names as the operation names in 1 wsdl and be able to configure this in JDeveloper for this at time of DB adapter configuration . I am using 11G . Is it possible ?

You can probably create a DB adapter with operation type selected as Execute Pure SQL and write SQL code to invoke the stored procedures depending on the procedure name (which you can get as one of the parameters of DB Adapter).
However, Even if you were able to do it, the DB Adapter schemas are generated based on stored procedure parameter list and types. If you use Execute Pure SQL type of DB Adapter the schema will be generated based on the parameters which you are using in your custom SQL code within DB Adapter. Which means that if you want to add a new stored procedure as target which has a different name and different parameters then you will need to regenerate the DB adapter and update your custom SQL code. This also means that you will need to do regression testing interfaces to all stored procedures whenever there is any change in this DBAdapter.
Now, my question is why do you want to invoke multiple stored procedures from same DB adapter?
This is not a good way to design integration solutions and makes your services resistance to change as it will take more time to change and test.
If all that you want is to have a web service which can have different operations for different stored procedures then you should create three business services and create a wrapper proxy service which has one operation for each stored procedure, within the proxy transform and call the correct backend service (you can use operational branch). This way you have a modular code where each module (read interface to one stored procedure) can be independently modified and tested.

Multiple stored procedures using JDBC Adopter, Synchronous call

Hello Guys,
This is kind of different scenario,
Here is the scenario (SQL Server -> XI -> Legacy)
1.I want to trigger stored procedure (from XI to)
2.Inside the stored procedure we are going to have multiple stored procedures.
-Inside stored procedures
SP1 -> It supposed to select the data from interface control table, if that is success
SP2 -> Call some other stored procedures which can be select/insert/delete from different tables most of the cases it would be select, if that is success
It should give results back (Response) to XI and with some output parameters like (status message, etc)
Next step I want send those results to target system which is legacy. If that is success
Next step I should update entry in the Interface control table(which is in SQL Server) with success entry like (success message, current date, current time, interface name, username.)
If it fails any stage like while selecting data from interface control table which is SP1/ SP2 It should give error message back to XI(output parameters). XI is going to send Alerts/Mails to respective interface owners.
This is my scenario can anybody help me on this what needs to be done to implement this scenario.

Hi Murali,
Anyway , altimately you are going to call one stored procedure and going to get one output. So it will not be a problem I think.
Anyway it is required to introduce BPM here.
<i>Next step I want send those results to target system which is legacy. If that is success</i>
>>>You can make sure that message is recieved by legacy system. Because legacy systems like File systems will not support Application Acknowledgement. So here you can go with Transport Acknowledgement.
From where will get Success messages like (current date etc) are you planning to take XI system date.. If so you can get this. And you can send the message to SQL.
<i>If it fails any stage like while selecting data from interface control table which is SP1/ SP2 It should give error message back to XI(output parameters). XI is going to send Alerts/Mails to respective interface owners.</i>
>>>For application errors like SP2 error etc, you need to get the Error Response from stored procedure itsel.
Second option is you can go with Adapter Alerting, whenever any error in the Sender JDBC adapter.
Anyway design/requirement should be perfect, before start the process here...
Regards,
Moorthy

Multiple Stored Procedures - One at a time

Hello everyone!
I´m going to start an interface that requires me to call multiple Stored Procedures, but they will not be called at the same time.
The legacy system has 3 stored procedures to be called, like this:
1 - SP number 1: it says to the legacy system that some data is going to come up and clean the previous data
2 - SP number 2: input data into the legacy system
3 - SP number 3: for each line above, more lines will be inserted - sort of header/line cenario
My question is: should I be able to achieve this goal using only PI 'normal' components or will I have to use BPM?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi Ricardo,
According to my knowledge not required to use the BPM.
In that first stored procedure you can call the another stored procedure, internally database can take the all necessary actions.
Check this links
http://www.sommarskog.se/share_data.html
http://bytes.com/topic/sql-server/answers/79780-stored-procedure-calling-another-stored-procedure_
Regards
Ramesh

Multiple Pricing Procedure in a single sales order

i have come across in a scenarion where i need to have multiple pricing procedures in a single sales order.
Does SAP support this functionality ?
actually i am using a free goods, so for the trade item i want it to be charged at "SALES GL-Code" and for free good item i want it be be charge at "BONUS GL-Code".
can anyone help me out that how can i handle this situation.

Hi,
Do not repeat the same question in different forums..
to answer your question:
No, not possible to have multilple pricing procedures to a single document.
For your scenario, the trade item will be charged as lets say PR00, and this will have an account key mapped to GL1
and for the free item, use the discount ctype R100 and map it to another GL--bonus GL and this should help you with your scenario.
Regards,
Raghu.

Multiple Cost Allocation Structures in Single Business Group

We are curently looking at solution design of creating multiple Cost
allocation flexfield in single business group environment.
Purpose :
Based on organization structure (18 companies) , the finance
consultants proposed multiple COA structures with different
valuesets , wherein values sets will be specific to the companies .
This was suggested inorder to aviod tedious job of defining
validations and post production support.
This has impact on payroll solution design wrt to cost allocation FF ,
where in we have to define multiple structures to map to Accounting
FFs.
Woudl like to check if oracle payroll supports this kind of setups.
Note :The implementation is for UAE localization.
Rgds/Lavanya

If Finance System has multiple COA structures with different valuesets , wherein values sets will be specific to the companies then they will seperating cosing on Various OU Level.
As my understanding, you have to create multiple Business Group as per multiple COA structures .
Thanks

Best practices for Calling Multiple Business Services in OSB

Hi All,
I have a requirement where I need to call multiple business services in OSB. We are presently calling them sequentially in a proxy pipeline. I was wondering if we could accomplish the same task in a better way. Each of the business services are mutually exclusive.
Thanks in Advance,
Rudraksh

Hi Eric,
Thanks for the response. We figured that it is possible to call multiple services with Split Join. However, we ran into the issue you described. We had a blocking call and had to wait until each of the services returned a response.
However, we needed a Async model for our design and felt that this might not be a right fit.
We are now looking at implementing the publish option with QoS configured as this fits our usecase better. Thanks for the help again.
Rudraksh

Provide authenticated username as parameter to a business service in OSB 12c

Dear OSB/OSB experts,
I have the following issue:
1. I have a web service that would accept username as a parameter in the SOAP request in order to do some internal authorization checks (filtering database rows, tables, etc.)
2. I want to connect that web service as business service in OSB 12c
3. The proxy service should NOT accept username as parameter
4. The proxy service should be protected via OWSM policy for authentication (either against the WLS authentication providers or through SAML tokens validation)
Based on the above is there any mechanism in the implementation of the proxy service to get the authenticated username from the security context and provide it as a parameter to the business service?
The authentication policy could use SAML tokens between two WLS domains - one will be running the WLS where proxy service clients will be running and the other - for the SOA 12c.
Many thanks in advance,
Anatoli

HI,
u can use Conditional Branching
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1061670
Split join would be used in case u need to split your request and call your Business Service in Serial/parallel & then gather resposnes from multiple callouts to have single response
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/splitjoin.html#wp1137258
Abhinav

Using a uddi key to create a business service in OSB

I want to be able to use a service registry key when creating a business service in OSB. I've found documentation on how to do this in Oracle ESB, but not in OSB.
From the documentation for OSB, I can only find a way to synchronize the business services imported from the service registry (when i search through the imported services there is no mention of the uddi key that i can see). I can choose to auto-import when setting up the registry, but I'm not sure exactly what this behavior does.
From the console documentation (http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/uddi.html)
"You can use the Auto-Import Status page to synchronize changes to a service with those present in the registry. Upon any changes to a service in the registry, Oracle Service Bus provides notification of the change on the Auto-Import Status page which lists all out-of-sync services. You can then synchronize the service in the Oracle Service Bus Console with the corresponding service in the UDDI registry."
This setting seems to automatically update the endpoint of the business service wihtout that administrator having to do anything, but what is actually being done? Is the service bus updating the endpoint as soon as it has been notified of a change or when i view/call the service is the endpoint being looked up?
Am I missing something??
Edited by: user498458 on Apr 27, 2009 11:30 AM

I took your advice and re factored the Receive class so it had all the functionality I needed except two methods which would then be overridden in the derived classes. What I had a hard time understanding is once an object of class say SpecialReceive extends Receive it can be referred to as Receive yet still maintain that it's a SpecialReceive.
What I mean is if I give a Receive object to some method and this method has no idea that this object is actually SpecialReceive and it calls a method say run() which gets overridden by the SpecialReceive. I thought that since this method has no idea what type of Receive this object is it will execute Receive's run(). But it actually does know what type of class it is and it executes the right run() method (the one that SpecialReceive overrides).
After I realized this there is no more need for casting.
Thanks everyone for your contributions.

Dynamic csf-key to Business service of OSB?

We have created single Business Service which is getting called from one proxy service to execute different Web Service end points.
For different end point execution I want to pass different authentication parameters.
Currently we have configured User Id and Password through single csf-key through policy.
Since csf-key is secured option to pass authentication parameters to end point, is it possible to configure dynamic csf-key to Business service of OSB?

Create a business service using file transport and type "Text".
Obtain the file name and assign to $body in ur proxy service stage and publish to the business service u just created.

Problem in creating JMS business service in OSB

Hi all
I am creating a JMS business service in osb:request /response is TEXT
It write to "*QueueSend*"-which is my URI endpoint
I have a MDB which read from "*QueueSend*" and write to "*QueueReceive*"
i have given the *"Response Endpoint*" in jms business service to point to "*QueueReceive*"
When i send the msg, it write to QueueSend and mdb writes it to QueueReceive but JMS business service doesn't read from QueueReceive,it just wait a long .......
What is the problem??
Thanks
Rohan

Hi Rohan,
Are you able to see consumers on "QueueReceive"?
If no, then your BS is not listening on this queue. Check the end-point again. Check server logs to know if any error occured while BS tried to connect with Queue. Restart your server which has this queue and then the OSB, and try again.
Regards,
Anuj

How to keep data integrity with the two business service in OSB 10.3.1.0

How to keep data integrity with the two business service in OSB 10.3.1.0
In our customer system, customer want to keep data integerity between two businness service. I thinks this is XA transaction issue.
Basing customer requirment, I created a testcase but I can't keep data integerity, For detail information, please refer the attached docs.

Can you please explain what you meant my data integrity in your use case?
Manoj

Having multiple Stored procedure in a single Business Service in OSB

Similar Messages

Maybe you are looking for