Having problem with A LOT of noise from my hardware cooler

Anyone know what to do about that else than getting it repaired? Maybe it is possible to do it your self without getting it to service which takes long time.
Hope you guys can help me out here!
Thanks

If your fan is making a lot of noise because it's worn out, and your computer is out of warranty or you don't mind voiding your warranty, you can indeed replace it yourself. Buy used parts from independent vendors (I don't know anything about parts vendors in Europe) and find instructions here:
http://www.ifixit.com/Browse/MacBook_Pro
If it's making a lot of noise because you're working your computer hard and the fan is spinning fast to keep up with the heat, the only thing you can do is work the computer less hard, so the fan doesn't need to run as fast.

Similar Messages

Anyone having problems with art/animation/audio disappearing from the timeline after a save?

Hello,
I'm having problems with many files losing their assets from the timeline after a save and reopening the file in Mac OS X Snow Leopard. This is happens quite often now and there seems to be no pattern to it. For example, I will open an existing Flash animation complete with sound and artwork, make changes to the animation timing, test the SWF and everything looks good, then save. After reopening the exact same file, there will be audio that was on the timeline will be an empty frame. In addition, there is art work that was swapped out or updated to a character and the symbols becomes empty after reopening. I'm losing days and hours of work and I can't seem to find any answers or help to figure out what's going on.
Any insight would be appreciated!
thanks!

I now use CS5.5 but I've noticed it on every version since CS4.
I JUST ran the latest update to 11.5.1.349
I'll let you know if it continues but for now I'm planning to learn a new software. Finally have some time to focus on this and if it works out I may say so long to Flash. I'll give CS6 a try but if it's not SIGNIFICANTLY improved (Brush tool comparable to ToonBoom, No losing data, Better Playback, Ability to export HTML5), it's just not worth it anymore. I've been using Flash since version 1 and since Adobe took it over, I hate to say that anything other than actionscript has gone WAY downhill. Many new features but they don't actually work well, or crash at runtime if used beyond a tutorial's level intensity. What's the point of all that functionality if it looks like garbage and can't perform on a professional level? Even if you do take the extra time to work slowly or limited to make it look nice - it loses the data! or now without HTML5 your venues of use are sliced in half? Pointless. I don't want to trash all my Flash experience, but I'm done defending an inferior product and waiting for it to catch up to a modern professional standard. I think my Flash days may be over very soon unfortunately. I feel like the're more interested in defending what they've created, than in making it work or even asking us what we want. I feel like a Girlfriend who's Man keeps promising to get steady work but hasn't after 10 years. Flash...we need to talk.

Is anyone having problems with high levels of noise?

I am shooting with a Canon 70D with a EFs 18-135mm lens.
I have noticed that there is more noise than I ever expected in the photos I have been taking. Even at ISO 100 in good lighting conditions, LR seems to show more noise than the Canon Pro software that came with my camera.
Has anyone else had this problem? If so, is there a fix besides having to do a lot of post shot editing in LR?

Steve,
my opinion here has nothing to do with failing to compare like with like: I've been using Lr for years now, and (to address Andrew's point) I've been ETTRing for as long as I can remember.
And I am absolutely clear, having carefully and diligently tested Lr's Canon 70D output, both against other converters which I also know very well how to drive; and against the results of other camera conversions from Lightroom, that the Lr 70D noise profile is clearly less than optimal: specifically, that its handling of noise in the shadows is very poor.
Every review of the 70D that I've read suggests that in noise terms it's better than the 7D (my main "comparison" body for my 70D tests), and it's demonstrably true of conversions in Photo Ninja, DxO Optics Pro, Capture One 7 Pro - and even DPP - but in Lightroom, uniquely, the 7D's results are superior to those of the 70D.
It has proven all but impossible to get an acceptable balance between low noise in the shadows and detail across the rest of the image (I'm a bird photographer - this matters to me) with 70D files, whereas the same balance is trivially easy to achieve with the 7D.
Again for the avoidance of any doubt, I'm a capable Lr user and I know how to balance NR, detail and sharpening for best results - and the 70D profile just doesn't hack it. This isn't about dragging up under-exposed images, it's about a noise profile which is inherently flawed.

My Apple TV is having problems with slideshows for photos synced from iTunes. How can I make it play thew whole slideshow without starting the loop again half way through?

My Apple TV randomly returns to the beginning in the middle of the slideshow for no reason. I don't habve the photos on shuffle
I started the slide show many times and somtimes it got through 20 photos, other times 50. Then all of a sudden, it goes back to the beginning and starts again. It's so frustrating as there is no reason for this and it doesn't loop back to the start on the same photo each time. I have about 350 photos in the album and they all loaded fine as thumbnails before I played the slideshow.
Can anyone help please?
Thanks, Adam

Have solved my own problem. My PC sits on the floor so I have a four-port USB hub on my desktop with one port in use. I use one of the other three ports for USB-related task. As I was shutting down for the night I had a - what turned out to be inspired - thought about whether there was an adequate power supply from the hub. I then tried the iPod USB connection directly into the front of my machine and everything worked. It seems that an inadequate power supply was the cause of this strange set of conditions.

Having problem with washed out prints only from Lightroom 5

Hi,
I have just gone over the Lightroom 5 and printing to an Epson Pro 3800. Background:
Fuly colour manage screen
Use Windows 7 64 bit
Using latest drivers
Only problem when printing from Lightroom 5, not PS CS5 or Nikon Capture NX2
Same result whether print via LR5 (with printer CM turned off) or via Printer CM (with LR5 turned off)
I cannot see any obvious issues or problems, so would be great if someone could assist!
Thanks
Krytten

Now sorted - had to reinstall the drivers. Never had this before...

Having problems with OS 4.5 on 8300

Hello, I own a 8100 and a 8300. I have installed the OS 4.5 on both of them. 8100 is working perfectly fine with the new features such as viewing youtube but the 8300 does not. 8300 is also having problems with finding and downloading applications from the App World.
Any help and comments are appreciated.
Thanks

Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
If not, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

Having problems with encoder readings due to motor commutation noise

Hello everyone,
I wanted to ask for advice with a hardware problem which I believe is rather usual.
Here I describe my application:
We are controlling an electric actuator for a robotics application. We are using encoders to take position readings and we need to perform analog acquisition for other measurements (such as force measured with strain gauges).
The problem is:
In summary, I am having problems to acquire properly position readings from a quadrature linear encoders and also some analog inputs. The cause is the commutation noise generated by the motor drive we are using (which is a brushless dc motor Moog BN-23-23).
Our acquisition platform is a NI PXI-8106 with a PXI-1042Q chassis. We have two possibilities to acquire the signals. We have a multifunction DAQ M series NI PXI-6259 and a FlexRIO NI PXI-7951R with a DIO module NI PXI-6581R.
The commutation noise have a frequency of 30 kHz. In an oscilloscope we can see a series of noise peaks that are only present during a short period of time (about 1/10 of the period of the noise). The rest of the time the noise is not present.
The Accelnet amplifier module that feeds the electric motor provides us with a clock signal synchronized with the noise (which frequency is about 1/4 of the noise frequency). This clock signal provides a mean to solve the problem of the analog acquisition. We can use this clock to perform a buffered acquisition with an external clock in LabView connecting the clock to a PFI pin or to the FPGA card. But the noise is also corrupting this clock signal (we get a daqmx error warning us about possible glitches in the clock signal, and also stopping the acquisition). I believe that solving the encoder problem we can solve also the analog acquisition problem.
In the encoder readings the noise is making our counter count upwards or backwards gradually rather fast. We can get an increase in position of about 10 cm/second without any appreciable movement in the linear actuator.
It would be of great help if anyone could post the solution he is using to solve this problem.
Thanks in advance for your help,
jespestana
PS: I insist in my belief that we are having a hardware issue, because we are only having bad readings when the electric motor is working. I am convinced so because we have already performed encoder and analog readings using other drives, such as hydraulic cylinders. Thus, I think that it is not a problem of our software (of our LabView VI).
Solved!
Go to Solution.

Hi jespestana,
I'm not sure why the noise would be causing your encoder measurement to increment more slowly... However I do have one suggestion on the M Series board (6259):
The M Series cards have built-in digital filtering on the PFI lines (see the M Series User Manual). It sounds like the noise is a series of ~3 us pulses (1/10 of 1/30 kHz). One of the available filtering frequencies that you may set on your M Series is 6.425 us, which should ignore any pulses (high or low) that are less than 6.425 us. You may set digital filtering with a DAQmx Property Node:
A caveat is that the driver only allows you to configure digital filtering for counter inputs on M Series devices. So, you could use digital filtering directly on your encoder task but not for your AI Sample Clock. A workaround can be found here, which involves configuring a dummy counter task to set the PFI filter for your AI task. If you're using the same PFI line for your encoder and AI task, you should just be able to set the PFI filter through the encoder task and not worry about the workaround.
With regards to the Flex RIO, I believe you could implement something similar on the FPGA, but I'm probably not the best person to comment about this. It would likely be a great deal more work than using the built-in filtering of the DAQmx API.
Best Regards,
John Passiak

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!

Hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?

hello! im from argentina. im having problems with my iphone. can my friend take it to usa for a cheking?
what do i need to take my iphone to an apple store? just the iphone? or the charger also? what about the ticket?
sorry about my english

If your phone was purchased in the US, yes. Otherwise, no. And, you only need the phone, nothing else.

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Having problem with A LOT of noise from my hardware cooler

Similar Messages

Maybe you are looking for