Having problem with accessing data in CRM machine
Hi,
I have a search functionality which searches for the records existing depending on the Id number passed... But every time i am trying to execute the BAPI it is giving me an
"Internal Server Error" if there are records existing for the given ID number...
But for any other ID number which does not have any records, the BAPI is executed.. Can anyone help me out with this...
hi,
Quite literally an "Internal Server Error" is an error on the server that you're trying to access. That server is misconfigured in some way that is preventing it from responding properly to what you're asking for.
sometime it may arise due to cache, but i am not sure about your case.
try accessing bapi from r/3 for both the condition, if it gets executed well then it is some server error or cache error
hope it helps
regards
Similar Messages
-
Is anyone else having problems with Apertures Date fields?
After experiencing a sysems failure I began restoring my images from backups. I have had no end of problems with Image dates. I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
Here is a clip from my image metadata using exiftool:
File Modification Date/Time : 2012:09:23 19:53:15-04:00
File Access Date/Time : 2013:01:16 11:34:38-05:00
File Inode Change Date/Time : 2013:01:16 11:31:32-05:00
Create Date : 2006:02:20 11:51:12.10
Date/Time Original : 2006:02:20 16:51:12.10
Modify Date : 2006:02:20 11:51:12.10
And here is what Aperture utilized on import
Date: 9/23/12 7:53:15 PM EDT
Date Created 9/23/2012 7:53:15 PM
So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
According to the Aperture mapping table, this shouldn't be happening.
Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about slightly over 30,000 images. Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image. That approach isn't acceptable.Hmm ok, let me restate the issue then, I thought I was clear. I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
Create Date : 2006:02:20 11:51:12.10
Date/Time Original : 2006:02:20 16:51:12.10
(The delta of 5 hours is the result of Zulu versus local time offset)
But, when I ingested it into Aperture, the import routine utilized the IPTC field
File Modification Date/Time : 2012:09:23 19:53:15-04:00
which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.). This resulted in the image date fields being stamped in Aperture as:
Date: 9/23/12 7:53:15 PM EDT
Date Created 9/23/2012 7:53:15 PM
Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields. -
Having problem with storing data in array
Hi,
I'm having problem on storing data in array. My problem is that each time it loops, the array just keep overwrite instead save to the next index. Like at 0 the value is 123, and 1 is 234. But i having that all data capture all overwrite at 0 till the last data it still show at 0. How do i correct this problem?
Solved!
Go to Solution.How to use array to do comparison? Like Array 1 go thru array 2 to get data Loss out and build an array. Like Array 1 ,1000,1024,1048,etc before 1520 fall in between Array 2 range 1000-1500. So Freq 1000,1024,1048 etc will get Loss value as 1 and 1520 fall in between 1500-2000 will output Loss 2. and so on till the end of the list. How should do this? Need help on this.
Array 1 Array 2
Freq Freq Loss
1000 1000 1
1024 1500 2
1048 2000 3
1100 :
1200 :
: 18000
1520
18000 -
Problem with upload data from CRM to BI system
When I try to perform full upload data from CRM to BI system with data source 0BPARTNER_ATTR (active version: Excutable). I waited for a long time but there are not any records were transfered (total records need to upload are 130) . I checked the log and can't find any errors.
Pls help me solve this problem.
Thanks and regardHi,
on the next day, the process finished with status not success.
The detail errors is:
Extraction(messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
Data package 1: arrived in BW; Processing: Selected number does not agree with transferred n
Request IDoc: Application document posted
Info IDoc 2: sent, not arrived; Data passed to port OK
Info IDoc 1: sent, not arrived; Data passed to port OK
Info IDoc 3: sent, not arrived; Data passed to port OK
Info IDoc 4: sent, not arrived; Data passed to port OK
However, the data has been uploaded to infoobject. Pls explain to me about this error and why the data can be uploaded with this error.
Regard -
How many of us are having problems with accessing web pages?
For five days I have been having problems accessing web pages, constantly getting the message
Safari can't connect to server etc. etc. It takes me ages just to get to one page without permanently returning to the previous one & trying again. I have tried to use these support pages & find it increasingly difficult to just open a page let alone post anything. If this works I'll be amazed!
I have checked with my ISP - British Telecom. who say there have been a lot of "worms" & 'viruses" across the internet in the last week. Has Safari been contaminated or is it just the www that is the problem? Has anybody at Apple investigated this problem?
I am getting increasingly frustrated by the whole thing as nobody seems to come up with a viable answer. Even if Safari is at fault it would be nice to know where we stand & that somebody is trying to do something about it!Thanks for that suggestion petitbjs. I think all is OK now. It started without warning, I hadn't changed anything, I just tend to use everything on the computer as it came, I'm a bit chicken to change anything incase I mess it up!!
Starman et al,
I had to phone BT this evening when I found my internet wireless phone wasn't connecting when I dialled out, it was the same yesterday evening but as I was trying to phone my son in Rio & was expecting him to move house at any time, I thought he might have had the phone disconnected, or it was just something wrong their end as I had the dialling tone OK & assumed the phone was fine. I have been using the landline, both of which go through the Home Hub, all through the last week without any problems.
Eventually the BT man had me unplugging the Hub from the mains whilst holding down the Wireless Association button, after which it was OK, however during all this (apart from when it was unplugged, obviously) I still had uninterrrupted internet service as I had to log into the BT website to check the configuration or something, & the chap seemed to think the phone's hub problem would have had nothing to do with my internet problem over the past few days.
Anyway, things seem to be fine now, I'll just hope it stays that way but at least I can try the unplugging trick if I have similar problems in the future.
Once again, thank you all for your help & suggestions, it is a great comfort to me knowing that I have these boards to call on for assistance on virtually any problem I have with my Mac. Before he moved to Rio I could cry "Help" to my son too, hopefully once they move & get set up with an internet connection next week we will be able to video chat (the whole reason I bought the new Mac!).
Many thanks to all,
Carol.
Wippitwalker -
I am having problems opening Facebook, and You Tube. The sites will not open and a page comes up saying I need to update my Adobe Flash. The Adobe Flach is already updated. What should I do?
The update alerts are fake, and are intended to mislead you into installing malware and/or to steal your identity.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting well-known websites such as Google, YouTube, or Facebook, then they're the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
Then go through the initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
If you downloaded and installed what you thought was a software update, ask for instructions. -
I am having problems with accessing an individual website on the entire network
I am having problems finding out how to unblock or correct an issue not allowing any computer on the network to access a specific webpage the error says that the dns is unavailable but I am able to access that site from outside the network on my phone to
my knowledge there are no other websites that are unavailable can you helpIf your website is internalsite.domain1.com
check if your DNS manager on your server has a group/folder named domain1.com
open the folder and right click in the screen on the right.
Here you can create a a record.
There is a nice article to help you:http://technet.microsoft.com/en-us/library/bb727018.aspx
Hope this helps you out. -
Problem with Java Dates and UPDATE for SQL2000
I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee -
My macbook pro 2.2ghz, i7 , early 2011 having problem with the graphic card
hi, just need clarification, that i was made to understand that the NVDIA graphic card installed in Macbook Pro, has a warranty of 3 years, eventough without Apple Protection Plan. Can someone clarify this , as i m having problem with it now.
No, the GPU does not have a seperate 'three year warranty'... unless you purchased the extended AppleCare Protection Plan.
If you feel that you're having problems with your GPU, take your machine to your local Apple Store or an AASP and have them run a free diagnostic test. If the card is faulty, and you don't have a APP, you'll have to pay to have the entire logic board replaced.
Clinton -
Still having problems with VPN access
Hello!
I am having problems with my VPN clients getting access to the networks over a MPLS infrastruture. I can reach these resources form my Core network (172.17.1.0/24) and my Wifi (172.17.100.0/24) but not from my VPN network (172.17.200.0/24). From the VPN I can reach the Wifi network (which is behind a router) and the rule that allows that also allows access to the other networks but for some reason it is not working.
When I ping inside the core network from VPN I can connect and get responses. When I ping to the Wifi network, I can get responses and connect to resources there. A tracert to the wifi network shows it hitting the core switch (a 3750 stack) @ 172.17.1.1, then the Wifi router (172.17.1.3) and then the host. A tracert to a resource on the MPLS network from the VPN shows a single entry (the destination host) and then 29 time outs but will not ping that resource nor connect.
I've posted all the info I can think of below. Any help appreciated.
*** Here is a tracert from a core network machine to the resource we need on the MPLS:
C:\Windows\system32>tracert 10.2.0.125
Tracing route to **************** [10.2.0.125]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms 172.17.1.1
2 1 ms <1 ms <1 ms 172.17.1.10
3 5 ms 5 ms 5 ms 192.168.0.13
4 31 ms 30 ms 31 ms 192.168.0.5
5 29 ms 30 ms 29 ms 192.168.0.6
6 29 ms 29 ms 29 ms 192.168.20.4
7 29 ms 29 ms 29 ms RV-TPA-CRMPROD [10.2.0.125]
Trace complete.
172.17.1.10 is the mpls router.
**** Here is the routing table (sh ip route) from the 3750 @ 172.17.1.1
Gateway of last resort is 172.17.1.2 to network 0.0.0.0
S 192.168.30.0/24 [1/0] via 172.17.1.10
172.17.0.0/24 is subnetted, 3 subnets
S 172.17.200.0 [1/0] via 172.17.1.2
C 172.17.1.0 is directly connected, Vlan20
S 172.17.100.0 [1/0] via 172.17.1.3
172.18.0.0/24 is subnetted, 1 subnets
S 172.18.1.0 [1/0] via 172.17.1.10
S 192.168.11.0/24 [1/0] via 172.17.1.10
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.2.0.0/24 [1/0] via 172.17.1.10
S 10.10.10.0/24 [1/0] via 172.17.1.10
S 10.20.0.0/24 [1/0] via 172.17.1.10
S 10.3.0.128/25 [1/0] via 172.17.1.10
S 192.168.1.0/24 [1/0] via 172.17.1.10
S* 0.0.0.0/0 [1/0] via 172.17.1.2
*** Here is the firewall config (5510):
ASA Version 8.4(1)
hostname RVGW
domain-name ************
enable password b5aqRk/6.KRmypWW encrypted
passwd 1ems91jznlfZHhfU encrypted
names
interface Ethernet0/0
nameif Outside
security-level 10
ip address 5.29.79.10 255.255.255.248
interface Ethernet0/1
nameif Inside
security-level 100
ip address 172.17.1.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 172.19.1.1 255.255.255.0
management-only
banner login RedV GW
ftp mode passive
dns server-group DefaultDNS
domain-name RedVector.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network WiFi
subnet 172.17.100.0 255.255.255.0
description WiFi
object network inside-net
subnet 172.17.1.0 255.255.255.0
object network NOSPAM
host 172.17.1.60
object network BH2
host 172.17.1.60
object network EX2
host 172.17.1.61
description Internal Exchange / Outbound SMTP
object network Mail2
host 5.29.79.11
description Ext EX2
object network NETWORK_OBJ_172.17.1.240_28
subnet 172.17.1.240 255.255.255.240
object network NETWORK_OBJ_172.17.200.0_24
subnet 172.17.200.0 255.255.255.0
object network VPN-CLIENT
subnet 172.17.200.0 255.255.255.0
object-group service DM_INLINE_TCP_1 tcp
port-object eq www
port-object eq https
object-group network DM_INLINE_NETWORK_1
network-object object BH2
network-object object NOSPAM
object-group network VPN-CLIENT-PAT-SOURCE
description VPN-CLIENT-PAT-SOURCE
network-object object VPN-CLIENT
object-group network LAN-NETWORKS
network-object 10.10.10.0 255.255.255.0
network-object 10.2.0.0 255.255.255.0
network-object 10.3.0.0 255.255.255.0
network-object 172.17.100.0 255.255.255.0
network-object 172.18.1.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.30.0 255.255.255.0
object-group network VPN-POOL
network-object 172.17.200.0 255.255.255.0
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object icmp
access-list Outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq smtp
access-list Outside_access_in extended permit tcp any object BH2 object-group DM_INLINE_TCP_1
access-list global_mpc extended permit ip any any
access-list Inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 any any
pager lines 24
logging enable
logging asdm informational
no logging message 106015
no logging message 313001
no logging message 313008
no logging message 106023
no logging message 710003
no logging message 106100
no logging message 302015
no logging message 302014
no logging message 302013
no logging message 302018
no logging message 302017
no logging message 302016
no logging message 302021
no logging message 302020
flow-export destination Inside 172.17.1.52 9996
mtu Outside 1500
mtu Inside 1500
mtu management 1500
ip local pool VPN 172.17.1.240-172.17.1.250 mask 255.255.255.0
ip local pool VPN2 172.17.200.100-172.17.200.200 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (Inside,Outside) source static EX2 Mail2
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static any any destination static NETWORK_OBJ_172.17.200.0_24 NETWORK_OBJ_172.17.200.0_24
nat (Inside,Outside) source static inside-net inside-net destination static NETWORK_OBJ_172.17.1.240_28 NETWORK_OBJ_172.17.1.240_28
nat (Inside,Outside) source static LAN-NETWORKS LAN-NETWORKS destination static VPN-POOL VPN-POOL
object network inside-net
nat (Inside,Outside) dynamic interface
object network NOSPAM
nat (Inside,Outside) static 5.29.79.12
nat (Outside,Outside) after-auto source dynamic VPN-CLIENT-PAT-SOURCE interface
access-group Outside_access_in in interface Outside
access-group Inside_access_in in interface Inside
route Outside 0.0.0.0 0.0.0.0 5.29.79.9 1
route Inside 10.2.0.0 255.255.255.0 172.17.1.1 1
route Inside 10.3.0.0 255.255.255.128 172.17.1.1 1
route Inside 10.10.10.0 255.255.255.0 172.17.1.1 1
route Inside 172.17.100.0 255.255.255.0 172.17.1.3 1
route Inside 172.18.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.1.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.11.0 255.255.255.0 172.17.1.1 1
route Inside 192.168.30.0 255.255.255.0 172.17.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RedVec protocol ldap
aaa-server RedVec (Inside) host 172.17.1.41
ldap-base-dn DC=adrs1,DC=net
ldap-group-base-dn DC=adrs,DC=net
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=Hanna\, Roger,OU=Humans,OU=WPLAdministrator,DC=adrs1,DC=net
server-type microsoft
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 172.17.1.0 255.255.255.0 Inside
http 24.32.208.223 255.255.255.255 Outside
snmp-server host Inside 172.17.1.52 community *****
snmp-server location Server Room 3010
snmp-server contact Roger Hanna
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map Outside_map interface Outside
crypto ikev1 enable Outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
telnet 172.17.1.0 255.255.255.0 Inside
telnet timeout 5
ssh 172.17.1.0 255.255.255.0 Inside
ssh timeout 5
console timeout 0
dhcpd address 172.17.1.100-172.17.1.200 Inside
dhcpd dns 172.17.1.41 172.17.1.42 interface Inside
dhcpd lease 100000 interface Inside
dhcpd domain adrs1.net interface Inside
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
group-policy RedV internal
group-policy RedV attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
default-domain value ADRS1.NET
group-policy RedV_1 internal
group-policy RedV_1 attributes
wins-server value 172.17.1.41
dns-server value 172.17.1.41 172.17.1.42
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
default-domain value adrs1.net
username rparker password FnbvAdOZxk4r40E5 encrypted privilege 15
username rparker attributes
vpn-group-policy RedV
username mhale password 2reWKpsLC5em3o1P encrypted privilege 0
username mhale attributes
vpn-group-policy RedV
username dcoletto password g53yRiEqpcYkSyYS encrypted privilege 0
username dcoletto attributes
vpn-group-policy RedV
username rhanna password Pd3E3vqnGmV84Ds2 encrypted privilege 15
username rhanna attributes
vpn-group-policy RedV
tunnel-group RedV type remote-access
tunnel-group RedV general-attributes
address-pool VPN2
authentication-server-group RedVec
default-group-policy RedV
tunnel-group RedV ipsec-attributes
ikev1 pre-shared-key *****
class-map global-class
match access-list global_mpc
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
class global-class
flow-export event-type all destination 172.17.1.52
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
hpm topN enable
Cryptochecksum:202ad58ba009fb24cbd119ed6d7237a9Hi Roger,
I bet you already checked it, but does the MPLS end router has route to VPN client subnet 172.17.200.x (or default) pointing to core rtr)?
Also, if the MPLS link has any /30 subnet assigned, you may need to include that as well in Object group LAN-NETWORKS.
Thx
MS -
I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks
simply try doing a back up and restore
when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
good luck !! -
updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?
Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel -
having problem with the apple tv, because it still setting date and time and dont finish w the activation
That means it is having trouble connecting to the network. Make sure location is set correctly. Go to settings - general - network and ensure DNS is set to automatic. Check that your router is up to date. If on wifi try Ethernet.
-
After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq
Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues. -
I'm having problem with my icloud account,I don't have access to the email i once used to set up my icloud account,this is really affecting me,I can't backup and restore anything from my phone and device..Can somebody help?
Hi Maastricht2014,
Until and unless you remember the password to your old email address, you will not be able to access the eBooks as those eBooks are only authorized with your old email address only.
The only workaround or alternative to access your eBooks will be to contact the eBook vendor and ask them to migrate the eBook from your old email to the new one.
Hope that Helps!
~ Arpit
Maybe you are looking for
-
Increase idle log out time of IC WebClient to 60 minutes
Hello All, We are in the process of implementing ICWC for CRM 5.0. After we open the CIC screen via transaction: CRM_IC; and remain idle for some time, the system automatically logs out of the CIC screen. We want the system to log out of ICWC screen
-
Transfer data from a Structure to other Structure when one is inactive
Hello, users and companions of LabVIEW and National Instruments Products, Hello, I'm working in a proyect with 2 Incremental Encoder Mitutoyo, I have a Digital Read Out (DRO) System for read the encoders, The proyect consist in measure a Paraboli Sus
-
Down load from I Pod to new computer old computer crashed unable to access old files?
My old computer crashed I purchased a new computer my I Pad was in my auto Is it possible to download my playlist and songs from the I pad to the new computer. I downed I Tunes and recovered songs from the store. I am unable to access any files from
-
App with notifications doesn't appear in "Settings-Notifications"
Hello. I have a strange problem. I cant activate Overcast notifications because the app doesn't appear in "Settings-Notifications". I tried everything I could; delete and reinstall the app, disable iCloud for the app, delete account and all data,...
-
Where are the other ten gigs?
My MBP has a 120 gig HD, but when I go to "Get Info", it says my capacity is 111.47 gigs, with 91.76 available, and 19.71 used. Where are the other ten gigs? Also, does anyone know how much space Leopard consumes?