Having problem with CS5, can only do one function then won't let me do anymore.

I adjust the brightness and contrast for my image, then I try to do any other function like laso content fill, and it will not work. What do I do? Just bought CS5 upgrade about a week ago.
Thank you,
Honey Maloof

It would help if you gave us the following System information:
Operating System/version number
Amount of RAM installed / % allocated to Photoshop
Hard drive(s) capacity / free space
Make and model number of video card
Also tell us what type of file (JPEG?, PSD?).

Similar Messages

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

I'm Having Problems With My iPod, Is any one else?

Hi, I was given a 5th Gen. iPod for Christmas which replaced my 3rd Gen. one. I loved my 3rd gen. and had not one problem with it. At first My new ipod was great until I started back at Uni after Christmas hols. which was the point at which i started using it very regularly and i started having some problems which are actually starting to ruin my enjoyment of my music.
I'll list them here. What i want to know is are other people having the same probs or am I an unlucky one and should try and get it exchanged/fixed as its still under warranty, or is there something else i can do? I've already restored twice to factory settings with no joy. And I have the latest iPod Software (1.1)
The Problems are as as such:
1. Often when watching videos the video will freeze but I still get sound and I can't get the video to unfreeze unless i totally restart the vid. from scratch.
2. The Battery Life meter is very intermittent it will jumps from almost empty to half full and back so i have no real idea what the battery life is like (this hasn't happened that often).
3. I often get the Warning triangle on start up and no matter how many time I do the reset (Hold off-on then select-menu) it wont reset properly (it does eventually work but after a combination of many tries, plugging it in etc. very frustrating this one)
4. Freezes on updates numerous times. Esp. If I do an iSync to my calendar etc. as well (Btw it doenst freeze necessarily on the iSync part just seems to happen more often if i have iSync setup).
5. Freezes on start-up at the apple symbol and again resets often don't work.
plus various other odd problems. At the moment I'm very disappointed with it. First time I've said that about an Apple product For a long time. Is there something i can do or are a lot of other people having similar problems, is this a send back issue or try and wait for the next firm/software to fix the problem?
Any Ideas would be much appreciated,
Thanks You
Paul (aka. Hyper Nova )

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

The current version of Firefox moves the tabs. Now the focus moves off the end of the row. I think this runs counter to the point of having tabs, if you can only see one at a time. How do I fix this

The tabs bar on 3.6 Firefox now focuses on the last tab in the row. This means that I can only effectively see one tab, unless I use the arrow button to scroll back through all the tabs. I am used to scrolling some, when there are a dozen tabs open, but How do I make the tab bar static, they way it used to be, so it stands still when I click on the last tab in the row.??

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

Having problem with HP Deskjet All-in-One 3050

I am trying to help someone who was given a Compaq Presario C700 (running Vista) and a HP All-in-One 3050 by her son. She doesn't understand how to use her computer, and it contains the remnants of things people have done to it trying to help her.
I believe her son set her up to use gmail by logging in the the gmail site and reading/writing her mail there. She would like to print her mail on the printer, and we managed to do that, even printing attached photos, but now printing doesn't work. It prints a Gmail header and her email address in color, but the text of the message, which is in b/w doesn't get printed. Print preview shows it as it should be. I created a simple document in wordpad and tried to print it and the same thing happened, except in this case the page was completely blank.
On the other hand, when I printed her inbox at gmail.com using File>Print, it did print the titles of messages listed.
The printer is connected to the computer over the local wireless network.
Could this have something to do with the cartridge being used up? Also, were that the case, wouldn't the printer indicate that somehow.
Any suggestions about how to proceed would be helpful.

Hello,
If you want to have the printer hooked up with a USB cable with printing option, then please try the below steps..
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
If you want to try using wireless installation then please visit www.hp.com/go/wirelessprinting
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Is anyone having problems with the newest update of ITunes and then trying to update the Iphone 4?

I updated the ITunes on the computer and that went ok, but when i went to go and update the IPhone 4 it went to restore it to the factory settings and then something happened where it wouldn't let it update and now the phone is stuck in Limbo world with the apple symbol showing and a status bar, but nothing else. also the phone is not showing up as being plugged in while in this limbo faze.

Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.

Having problems with this, can you help?

Hello everyone, I'm currently making a j2me game, I'm still a newbie to it tho.
I'm currently making the splash screen and I've followed a tutorial and intended to make my own, problem now is that there is something wrong with the code and is not working as I thought it would. Can you guys check what's wrong with my code? And please advise me on what's wrong and how do I fix it. Thanks alot. The code is below. The Sscreen.java is the one responsible for making and showing the splash screen while the Main.java is the main midlet and calls Sscreen.java.
// Sscreen.java
import java.util.Timer;
import java.util.TimerTask;
import javax.microedition.lcdui.*;
public final class Sscreen extends Canvas
     private Display dis;
     private Displayable nxt;
     private Timer tmer;
     private Image im;
     public Sscreen(Display dis,Displayable nxt,Image im)
          tmer=new Timer();
          this.dis=dis;
          this.nxt=nxt;
          this.im=im;
          dis.setCurrent(this);
     private void dismiss()
          tmer.cancel();
          dis.setCurrent(nxt);
     protected void keyPressed(int keyC)
          dismiss();
     protected void paint(Graphics g)
          g.setColor(0x00000000);
          g.fillRect(0, 0, getWidth(), getHeight());
          g.setColor(0x00000000);
          g.drawImage(im,getWidth()/2,getHeight()/2-5,3);
     protected void showNotify()
          tmer.schedule(new Counter(), 3000);
     private class Counter extends TimerTask
          public void run()
               dismiss();
// Main Class
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class Main extends MIDlet
     private Display dis;
     private Image im;
     private boolean Splash=true;
     public Main(){}
     protected void destroyApp(boolean arg) throws MIDletStateChangeException {
          notifyDestroyed();
     protected void pauseApp() {     }
     protected void startApp() throws MIDletStateChangeException {
          dis=dis.getDisplay(this);
          if(Splash)
               Splash=false;
               try
                    im=Image.createImage("/bg.png");
                    new Sscreen(dis,new Temp(),im);
               catch(Exception e)
                    System.out.println("Prob 2");
     class Temp extends Form implements CommandListener
          private Command exitCommand = new Command("Exit", Command.EXIT, 1 );
          public Temp()
               super("Main");
               addCommand( exitCommand );
     setCommandListener( (CommandListener) Main.this );
          public void commandAction(Command arg0, Displayable arg1) {
               notifyDestroyed();
}

i think problem is here
*setCommandListener( (CommandListener) Main.this );*instead use
setCommandListener(this );

Im having problems with landrules can anybody help?

the game wont let me create account cos it keeps saying error in waiting for the mainframe. Please help solve this problem as i cant get in contact with the developer of the game

Only the developer can help you.

Having problems with CS5

Hey,
I have to create an animation for a school assignment... Anyway I'm quite new to Adobe Flash and I'm using Action Script 3.0. I have created the first segment of my animation and I'm now onto the second part but when i go to change the stage background of my second segment it changes the background of my first segment. If you don't understand this just say so and I'll rewrite.
Regards, PuMpEd123
[Im new to these forums so if I have posted in the wrong section could Admin/Mod move it thanks]

stage color will be the same for your entire project. to change the background color of different scenes or frames, draw a colored rectangle in a frame in the bottom-most layer. that colored rectangle can be changed in any keyframe.

I having problems with it switching on my macbook and then it automatically switches off

i have had Yosemite for a while and it was working perfectly, and the suddenly is froze and automatically shut down. I tried rebooting it it would come up with the apple logo and a loading bar e=underneath and when it loads the bar fills in with grew but a quarter from the start it it shut downs again. t is not reopening how do i fix my problem? help!!!!
I want to know how to boot up my macbook without erasing my hardrive.

Try booting into Safe Mode. If that is successful, but then a normal reboot fails, you may have some third-party software installed that is preventing boot up. If you have any ideas what it might be, we can help you uninstall it.
OS X: What is Safe Boot, Safe Mode? - Apple Support
The other thing to try is boot into Recovery and use Disk Utility to repair the drive:
OS X: About OS X Recovery - Apple Support
Finally, you can try just reinstalling the OS using Recovery. It won't erase any of your data, but you should still have a backup.

I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
It happened suddenly and seemed to get better after a day or two but then went completely after another day.
I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!

Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally.

Am I the only one having problems with ringer volume since the update?

Am I the only one having problems with ringer volume since the update?? I'm hard of hearing and before updating to IOS7 I could hear my alarm and ringer just fine. Volume is turned up all the way and I've chosen the loudest sounds I could and still having a difficult time hearing.

Annie Hall is available on DVD only.
It is not available for streaming and I believe movies available for streaming are the only movies available with the Netflix app on an iOS device.

Having problem with CS5, can only do one function then won't let me do anymore.

Similar Messages

Maybe you are looking for