Having problems implementing OMS

Please be patient with me as I am new to Oracle,
I have not been able to configure and run OMS even though I
have followed the instructions I have found in several
locations including the OMS Configuration Guide and the Oracle
By Example Series.
I have tried running 9i Database in Windows XP Pro, Windows
2000 Pro, Windows 2000 Advanced Server, and now Windows .NET
Enterprise Server all with the same results. I have even tried
8i with the same results.
I have created a database specifically for OMS. I have run the
OEM Configuration Assistant to create my repository in that
database. I have made sure that the Database service is
running and the Database is open. I have made sure that the
Intelligent Agent service is running. I have configured a
static IP address.
The problem is that the OMS Service will not start. I don't
know if it is because OMS is not configured correctly, not
installed correctly, or is incompatible with my software or
hardware.
If anyone could point out what I have overlooked, or could
point me in the direction of a "baby-steps" kind of "how-to"
for implementing OMS, or tell me I am just plain ignorant, I
would greatly appreciate it.
Thanks and Merry Christmas,
Dwayne Croteau

After a couple of months and about 20 reinstallations I figured
it out.
When I installed Oracle 9i for the first time I tried to
install into Program Files\Oracle\Ora90 but the installer
complained that Oracle couldn't be installed into a location
that had a space in the path. So I substituted the DOS
compatible path for that directory Progra~1\Oracle\Ora90. OMS
started without a problem after I installed Oracle into a
directory without a space in it's name.
Woo-Hoo!
Dwayne

Similar Messages

Having problem implementing enhancement spot 'OI0_OGSD_XM06'

Hi,
I have an enhancement spot using BADI 'OI0_OGSD_XM06'. It has property 'Can only be implemented SAP-internally' checked
under usability options. I want to know if this enhancement spot could be implemented. If yes, how?
Thanks in advance!

I am facing the same issue. However I learnt that we might need to use Adjusting Tool from Object Navigator/SE80 on the implementation before transporting.

Having problem implementing array in code?

I am trying to write a code that will ask the user to either enter in a name of a reds baseball player, a batting average, or a slugging percentage. When this is entered the name of that corresponding player will pop up along with his stats. The code that I have so far is written below. I just need help in the three areas of my if statements so that if the user types in a name, average, or slug percentage then that player and stats will come up from the file in my program(stats.txt).
import javax.swing.*;
import java.io.*;
public class BattingStats
public static void main(String[]args) throws IOException
String option=selectOption("Select a search option"))
getPlyrName();
//need help here?
if(option.equals("listBatAvg"))
//need help here?
if(option.equals("listSlug"))
//need help here?
private static void readSomeLines() throws IOException
String filename="stats.txt";
FileReader fr=new FileReader( filename);
BufferedReader br=new Buffered Reader (fr);
String sLine=br.readLine();
while (sLine != null)
String[] stats = sLine.split("\t");
sLine=br.readLine();
br.close();
public static String selectOption (String prompt)
String option=" ";
int choice= JOptionPane.showOptionDialog(null, prompt, "Cinncinnati Reds player stats", JOptionPane.DEFAULT_OPTION, new Object[]
"Search for a particular players stats", "List stats in decending order based on slugging percentage"
if (choice==0)
option="searchPlyr";
if(choice==1)
option="listBatAvg";
if(choice==2)
option="listSlug";
return option;
public static String getPlyrName () throws IOException
String name=JOptionPane.showInputDialog(null, "Enter players name?");
return name;
}

I assume that there will be more than one line in each txt file. Your code appears to loop through the file lines but does nothing with them. I think you need something like:
import java.util.ArrayList;
ArrayList allResults = new ArrayList();   //Declared at the top of your program
allResults.add(stats);
I reproduce your code below with some amendments. I think you would have a hard time compiling this without my amendments. I am not sure about some of the details but atleast it will now compile. You should compile and run your code regularly so that you only have one or two errors to deal with. You should add occasional System.out.println("Message") statements to help you understand what the code is doing. You can comment them out when you are confident.
import javax.swing.*;
import java.io.*;
public class BattingStats
     public static void main(String[]args) throws IOException
          // OK Java is object oriented so get rid of static and
          // create a BattingStats object
          BattingStats b = new BattingStats();
     public BattingStats()
          String player = "";
          String option=selectOption("Select a search option"); //Removed surplus bracket
          try
               player = getPlyrName();
          catch (IOException ioe)
               System.out.println("Error in getting Player name");
               System.out.println("Program terminating");
               System.exit(1);
               //need help here?     <<< Sort out file reading first
          if(option.equals("listBatAvg"))
               //need help here?
          if(option.equals("listSlug"))
               //need help here?
     private void readSomeLines() throws IOException    // Static removed
          String filename="stats.txt";
          FileReader fr=new FileReader( filename);
           //BufferedReader br=new Buffered Reader (fr);
          BufferedReader br=new BufferedReader (fr);
          String sLine=br.readLine();
          while (sLine != null)
               String[] stats = sLine.split("\t");
               sLine=br.readLine();
               //The above is fine but surely you have more than one line
               //if so your data is being read and dropped.
               // I guess you need to create an ArrayList and add each
               // stats line to it
          br.close();
     public String selectOption (String prompt)   //Static removed
          String option=" ";
          //int choice= JOptionPane.showOptionDialog(null, prompt, "Cinncinnati Reds player stats", JOptionPane.DEFAULT_OPTION, new Object[]
          //"Search for a particular players stats", "List stats in decending order based on slugging percentage"
          String[] optionArray = {
                    "Player stats",
                    "Batting average",
                    "Slugging percentage"
          int choice= JOptionPane.showOptionDialog(
                    null,
                    prompt,
                    "Cinncinnati Reds player stats",
                    JOptionPane.DEFAULT_OPTION,
                    JOptionPane.QUESTION_MESSAGE,
                    null,
                    optionArray,
                    optionArray[1]
          if (choice==0)
               option="searchPlyr"; //Where is this used
          if(choice==1)
               option="listBatAvg";
          if(choice==2)
               option="listSlug";
          return option;
     public String getPlyrName () throws IOException   //Static removed
          String name=JOptionPane.showInputDialog(null, "Enter players name?");
          return name;
}Please note that by highlighting the code and pressing the code button it keeps the formatting. This is why you can see the indents above.

Windows 8.1 having problems with pinter selection using Elements 13.

I am running Windows 8.1 with Elements 13 and am having problems with PRINT. If I select a printer from the PRINTER menu, Elements recognizes the change of selection, allows me to modify the printer's specific setting and, then, when I PRINT seems to not recognize the selected printer and print of whatever was set as the original printer. Then, I delete the "original" printer in Windows 8.1 and attempt to print again with the same general result except I receive a Printer Not Found error from Windows.
How do I modify the "original" printer setting (seems to be associated with the file)? Note the "original" printer is not the default printer.

Hatstead,
Thank you.
Yes, all of the print drivers are up to date (re-verified last evening).
Yes, I can print and select the printer as normal for all of the standard applications I use (Visio, PowerPoint, Word, Excel, Outlook, direct print from file (Explorer)).
I shortened the printer names from the standard Microsoft convention (based on some of the BOG comments). There was no change. In fact after the test sequence noted in #5, I re-implemented the "name shortening" yet again (shorter yet). I launched Elements and ran into the same messages noted in #5 (obviously, the "stored" printer did not exist). Yet after I went through the printer selection process (again as in #5) and, after a lag time, Elements redirected the print job what was the "stored" printer which was renamed....I do not know how Elements associated the deleted "Stored" printer with its old name with the newly named printer since no other application could (I checked).
I have closed and restarted the PC numerous times.
I have deleted all of the printers except the one I wanted to use for the specific print job. In this case, Elements came back with a message it could not access the "stored" printer. I then selected the correct printer, Elements acted like it was allowing to set up the selected printer with the specifics of the print job, and, then when I went to print, Elements again tried to redirect the print job to the "stored" printer (even though it did not exist).
The target printer is a "local" printer (USB connected). The apparent "Stored" printer is a network printer. So, I deleted the PC which has the "Stored" printer from the network (actually not only deleted it from the devices on my PC but literally shut the PC down and disconnected it from the network (two different test)) to no avail (still got the test results in #5).
Yes, I have attempted to print from the Editor (my normal mode) and from Organizer.
I have copied, open a new file and, then, pasted the image I wanted to print to no avail.
Is the a "stored" printer associated with the file or with Elements? If so, how to I modify (or dis-associate)?
Again, thank you.

Having problems setting text to a JLabel!!

HI *.*,
i'm having problems setting text to a JLabel.
i have a JFrame with a JPanels and on the JPanel i have a JLabel.
I have a text field wihich is used to input text.
So, i'm using textField.getText() to read the text of the text field and setText() to write it to the Label.
but setText() isn't displaying the text on the label.
I'm using NetBeans as an ide
Does anyone have any ideas??

Here is some code
public class AddClass extends JFrame implements ActionListener{
    public AddClass() {
        initComponents();
    }//end of 1st constructor with initComp
    //initComponents
    private void initComponents() {
        getContentPane().setLayout(new java.awt.GridLayout(3, 1));
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        prodPanel.setLayout(new java.awt.GridLayout(1, 3));
        prodPanel.setBackground(new java.awt.Color(255, 255, 255));
        prodPanel.setBorder(javax.swing.BorderFactory.createTitledBorder(javax.swing.BorderFactory.createEtchedBorder(), "Production", javax.swing.border.TitledBorder.DEFAULT_JUSTIFICATION, javax.swing.border.TitledBorder.DEFAULT_POSITION, new java.awt.Font("Arial", 1, 12)));
        westPanel.setLayout(new java.awt.GridLayout(6, 0));
        westPanel.setBackground(new java.awt.Color(255, 255, 255));
        westPanel.add(westLab1);
        westLab2.setBackground(new java.awt.Color(255, 255, 255));
        westLab2.setFont(new java.awt.Font("Arial", 1, 36));
        westLab2.setForeground(new java.awt.Color(0, 204, 0));
        westLab2.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        westLab2.setIcon(new javax.swing.ImageIcon("C:\\icontexto-webdev-bullet-048x048.png"));
        westLab2.setText("MQ 35");
        westLab2.setHorizontalTextPosition(javax.swing.SwingConstants.LEFT);
        westLab2.setIconTextGap(10);
        westLab2.setInheritsPopupMenu(false);
        westPanel.add(westLab2);
        westPanel.add(westLab3);
        westPanel.add(westLab4);
        westPanel.add(westLab5);
        prodPanel.add(westPanel);
        setJMenuBar(menuBar);
        setTitle("Broker Monitor");
        this.setSize(700, 700);
        BrokerWindowCloser brkWindowCloser = new BrokerWindowCloser();
        this.addWindowListener(brkWindowCloser);
        pack();
        //       setVisible(true);
    }//end of initComponents
    public AddClass(String st) {
        initComponents();
        westLab6.setVisible(true);
//        System.out.println("in broker " + st);
        westLab6.setText(st);
        System.out.println(st);
        westLab6.setBackground(new java.awt.Color(255, 255, 255));
        westLab6.setFont(new java.awt.Font("Arial", 1, 36));
        westLab6.setForeground(new java.awt.Color(0, 204, 0));
        westLab6.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
        westLab6.setIcon(new javax.swing.ImageIcon("C:\\PNG\\icontexto-webdev-bullet-048x048.png"));
        westLab6.setEnabled(true);
        westLab6.setHorizontalTextPosition(javax.swing.SwingConstants.LEFT);
        westLab6.setIconTextGap(15);
        westLab6.setInheritsPopupMenu(false);
        westPanel.add(westLab6);
//       this.validate();
        westPanel.repaint();
    public void actionPerformed(ActionEvent ae) {
        Object source = ae.getSource();
        if(source == exitMI) {
            System.exit(0);
        }//end of if exitMI
        if(source == addMI){
            new AddMQ_1_1();
        if(source == removeMI){
            new RemoveMQ_1();
    }//end of actionPerformed
    class BrokerWindowCloser extends WindowAdapter {
        public void windowClosing(WindowEvent we) {
    }//end of windowcloserclass
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new AddClass().setVisible(true);
    }//end of main
}// End of variables declaration
   public void addButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
        Object source = evt.getSource();
        if(source == addButton){
            System.out.println("here");
            String st = mqNameJTF.getText();
            Broker1 br = new Broker1(st);
            AddClass adc = new AddClass(st);
            this.repaint();
this.dispose();
        }//end of if addButton
    }//end addButtonActionPerformed

Really having problems conditioning while loop with a front pannel occurance

Hi
I was hoping somebody may be able to help me with a problem I am having running my vi so it acts on front panel occurrences.
The vi in question "test platform v" is in the vi library I attach with this message.
Basically I would like the vi to run continuously and each time I change the front panel values (which set the hardware) the updating loop stops the hardware is reset and the updating loop then continues.
I guess I need to use occurrences so that the updating loop recognizes when the front panel values have changed so the new data can be written to the hardware.
I am having trouble working out how to do this. I guess so event based code would be best - I ama having trouble implementing this.
I have simplified the code a lot to make the process of what I am trying to do easier to understand.
Hope somebody can help.
Many Thanks
Attachments:
big A 2 and tourist test platform.llb ‏1616 KB

You need a few more tricks. The answers you seek are in a very simple solution in the attached VI.
You need to understand events and using property nodes with Signal (Very Important)
Matt
www.CompleteAutomatedSolutions.com
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison
Attachments:
genEvent.vi ‏31 KB

Having problems with encoder readings due to motor commutation noise

Hello everyone,
I wanted to ask for advice with a hardware problem which I believe is rather usual.
Here I describe my application:
We are controlling an electric actuator for a robotics application. We are using encoders to take position readings and we need to perform analog acquisition for other measurements (such as force measured with strain gauges).
The problem is:
In summary, I am having problems to acquire properly position readings from a quadrature linear encoders and also some analog inputs. The cause is the commutation noise generated by the motor drive we are using (which is a brushless dc motor Moog BN-23-23).
Our acquisition platform is a NI PXI-8106 with a PXI-1042Q chassis. We have two possibilities to acquire the signals. We have a multifunction DAQ M series NI PXI-6259 and a FlexRIO NI PXI-7951R with a DIO module NI PXI-6581R.
The commutation noise have a frequency of 30 kHz. In an oscilloscope we can see a series of noise peaks that are only present during a short period of time (about 1/10 of the period of the noise). The rest of the time the noise is not present.
The Accelnet amplifier module that feeds the electric motor provides us with a clock signal synchronized with the noise (which frequency is about 1/4 of the noise frequency). This clock signal provides a mean to solve the problem of the analog acquisition. We can use this clock to perform a buffered acquisition with an external clock in LabView connecting the clock to a PFI pin or to the FPGA card. But the noise is also corrupting this clock signal (we get a daqmx error warning us about possible glitches in the clock signal, and also stopping the acquisition). I believe that solving the encoder problem we can solve also the analog acquisition problem.
In the encoder readings the noise is making our counter count upwards or backwards gradually rather fast. We can get an increase in position of about 10 cm/second without any appreciable movement in the linear actuator.
It would be of great help if anyone could post the solution he is using to solve this problem.
Thanks in advance for your help,
jespestana
PS: I insist in my belief that we are having a hardware issue, because we are only having bad readings when the electric motor is working. I am convinced so because we have already performed encoder and analog readings using other drives, such as hydraulic cylinders. Thus, I think that it is not a problem of our software (of our LabView VI).
Solved!
Go to Solution.

Hi jespestana,
I'm not sure why the noise would be causing your encoder measurement to increment more slowly... However I do have one suggestion on the M Series board (6259):
The M Series cards have built-in digital filtering on the PFI lines (see the M Series User Manual). It sounds like the noise is a series of ~3 us pulses (1/10 of 1/30 kHz). One of the available filtering frequencies that you may set on your M Series is 6.425 us, which should ignore any pulses (high or low) that are less than 6.425 us. You may set digital filtering with a DAQmx Property Node:
A caveat is that the driver only allows you to configure digital filtering for counter inputs on M Series devices. So, you could use digital filtering directly on your encoder task but not for your AI Sample Clock. A workaround can be found here, which involves configuring a dummy counter task to set the PFI filter for your AI task. If you're using the same PFI line for your encoder and AI task, you should just be able to set the PFI filter through the encoder task and not worry about the workaround.
With regards to the Flex RIO, I believe you could implement something similar on the FPGA, but I'm probably not the best person to comment about this. It would likely be a great deal more work than using the built-in filtering of the DAQmx API.
Best Regards,
John Passiak

Having problem accessing MacMini over network with PC's Windows 7

Hi all,
I have a Mac Mini with 10.6.x
Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
I came across as i was searching for this issue and it seems that authentication - Golden triangle or whatever is called - might be the issue in the whole mess. Do you guys think that this might be the case ?
The only way i have found out to help is to restart the Router and Server and that usually fix the problem .
Could you please help me figure what is going on there?
Here is the original thread: https://discussions.apple.com/thread/3867559?tstart=0 ( i think i posted in the wrong forum )

The specified changeip -checkhostname command does not make changes to your configuration.
To research the command (and that's entirely your perogative), please use Google or Bing to search for previous discussions and details, or review the provided man page documentation for the command. (Launch Terminal.app (folder Applications > Utilities) and issue the command man changeip. You'll see something like this:
$ man changeip
changeip(8)               BSD System Manager's Manual              changeip(8)
NAME
     changeip -- Change service configuration files with hard-coded IP addresses
SYNOPSIS
     changeip [-v] [-d path] old-ip new-ip [old-hostname new-hostname]
     changeip -checkhostname
     changeip -h
DESCRIPTION
     changeip is used to manually update configuration records when a server's IP address or hostname changed in a way that affected services were unable to properly process, for example when the server is behind a NAT device and the WAN identity changed. ...
Given your response and your concern, consider creating a backup of your disk. Shut down, boot the installation DVD, and use Disk Utility (from the Utilities menu) in the second screen of the installation process to copy your disk contents to an external storage device. (Time Machine isn't as good at getting a backup of a server as is a clean backup created while shut down.) There are descriptions around that detail how to create this backup using Disk Utility.
There is no DNS server implemented in the Airport Extreme. The Airport Extreme forwards DNS requests to a DNS server elsewhere. Few gateway devices contain DNS servers; that these devices request a DNS address tends to be confusing, too. That address is solicited from the user for use in the DHCP server that many of the available gateway devices provide.
There is no need for a DNS forwarder, particularly if your server is configured for your LAN. (Adding a forwarder adds another hop into the whole translation process. That configuration and that extra hop can be useful when the intermediate DNS server is providing specific, enhanced DNS-related functions, such as security monitoring and logging, or providing a "nanny filter" mechanism.)
If you are running DNS services on your LAN, then your Airport Extreme DHCP server should be configured to pass out the IP address of your DNS server.
It would appear that your local box has the default self-hosted DNS, and is not configured to serve LAN DNS (other than for itself). That's good. Accordingly, it'll likely be getting good DNS from itself, but will not be getting translations for other hosts on your network. That's not so good. When DNS responses are not available, you'll get DNS-level timeouts, and those are usually around 30 seconds each.
Check your server logs for messages related to the failed connections, and check the Windows file service logs for any errors being generated by the file service. The log information is most easily available from Console.app, which is a utility in Applications > Utilities folder, or from the Server Admin tool (Applications > Server folder) for DNS, and for the file server component.
The above is probably going to read like a wall of unfamiliar jargon, so please ignore this and my previous response here, and I'll leave it to somebody else to assist you here.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

Hi I am having problems removing mail from trash folder. Can anyone help please

Hi I am having problems removing mail from trash folder. I can send mails to the folder but cannot delete them permanently from the trash folder. I am using Iphone 3G and anm up to date with OS. Can anyone help please

Check that there isn't a different Trash folder to the one with the proper Trash symbol on it.
If you see one in your list of folders rather than a separate one, highlight it, then click on Mailbox...Use this mailbox for...Trash

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. I get a message on my phone that says " the URL you are requesting is not found on this server". Pics and videos have been deleted too.

I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud. When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play. I get a message on my phone that says " the URL you are requesting is not found on this server". I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted. I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either. Is there someway to get the videos to play on my phone again? Make the photos not as blurry as they are now and to restore the pics and videos that have been lost? I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be. Please help if you can.

I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
Need help too!!

Hi I am having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and loading then I get an error message saying unable to download app. Eventually,after many attempts it works.

Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?

Hi John
iTunes Support wasn't of any use to me.
I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb. This is also affecting AppleTV downloads
I am using Virgin Media as my ISP, and was wondering whether you do as well. This might be the common thread.
-Bernard

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Having problems implementing OMS

Similar Messages

Maybe you are looking for