Windows 8.1 having problems with pinter selection using Elements 13.

I am running Windows 8.1 with Elements 13 and am having problems with PRINT. If I select a printer from the PRINTER menu, Elements recognizes the change of selection, allows me to modify the printer's specific setting and, then, when I PRINT seems to not recognize the selected printer and print of whatever was set as the original printer. Then, I delete the "original" printer in Windows 8.1 and attempt to print again with the same general result except I receive a Printer Not Found error from Windows.
How do I modify the "original" printer setting (seems to be associated with the file)? Note the "original" printer is not the default printer.

Hatstead,
Thank you.
Yes, all of the print drivers are up to date (re-verified last evening).
Yes, I can print and select the printer as normal for all of the standard applications I use (Visio, PowerPoint, Word, Excel, Outlook, direct print from file (Explorer)).
I shortened the printer names from the standard Microsoft convention (based on some of the BOG comments). There was no change.  In fact after the test sequence noted in #5, I re-implemented the "name shortening" yet again (shorter yet). I launched Elements and ran into the same messages noted in #5 (obviously, the "stored" printer did not exist). Yet after I went through the printer selection process (again as in #5) and, after a lag time, Elements redirected the print job what was the "stored" printer which was renamed....I do not know how Elements associated the deleted "Stored" printer with its old name with the newly named printer since no other application could (I checked).
I have closed and restarted the PC numerous times.
I have deleted all of the printers except the one I wanted to use for the specific print job. In this case, Elements came back with a message it could not access the "stored" printer. I then selected the correct printer, Elements acted like it was allowing to set up the selected printer with the specifics of the print job, and, then when I went to print, Elements again tried to redirect the print job to the "stored" printer (even though it did not exist).
The target printer is a "local" printer (USB connected). The apparent "Stored" printer is a network printer. So, I deleted the PC which has the "Stored" printer from the network (actually not only deleted it from the devices on my PC but literally shut the PC down and disconnected it from the network (two different test)) to no avail (still got the test results in #5).
Yes, I have attempted to print from the Editor (my normal mode) and from Organizer.
I have copied, open a new file and, then, pasted the image I wanted to print to no avail.
Is the a "stored" printer associated with the file or with Elements? If so, how to I modify (or dis-associate)?
Again, thank you.

Similar Messages

  • Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Having problem with spinning ball using final cut pro x with new macbook pro with retina screen

    Update the software. There is no reason to run a two year old version.
    Russ

  • Big problem with a select using remote database

    Hi Guy.
    I have a big problem with a simple query, but this is a scenario.
    Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 installed on Red Hat As 4.5 placed in Milano Italy . Ttwo networks are connected via two adsl cisco router with firewall and Vpn functions. In Egypt there isn't a very good adsl.
    In Alexandria, I'm trying to connect to database in Italy with sqlplus. The sqlplus connected I write.. select * from addetti and all work fine.
    My problem is that when I try to make the same select on a table with many columns oracle database kill me a session.
    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.
    So I began to change my query I start to
    select field1 from ic_lav... and work
    select field1,field2,field3,..........field50 from ic_lav and work
    select field1,field2,field3,..........field70 from ic_lav and doesn't work
    the select work with 68 columns
    problem: the query with more then 1064 byte for row doesn't work.
    I've tryed with anoter big table with the same problem, but the select fwork with 65 columns...
    Iit is obvious that there is any problem with the limit of the query.
    The same query (select * from ic_lav) in localMilano)l work fine.
    The same query (select * from ic_lav) in vpn with a better adsl line and openvpn software (NO CISCO firewall) WORK FINE.
    The same query connectetd in Milano with a vpn make with analogic modem and remote access by windows work fine.
    the query (make on my laptop connectet with vpn by cisco doesn't work.
    In cisco firewall we haven't any error (cisco man tell me so)
    on database 9 I found :
    *** 2009-06-12 09:49:45.509
    *** SESSION ID:(66.44406) 2009-06-12 09:49:45.497
    FATAL ERROR IN TWO-TASK SERVER: error = 12152
    *** 2009-06-12 09:49:45.509
    ksedmp: internal or fatal error
    Current SQL statement for this session:
    select * from ic_lis where ditta
    ----- Call Stack Trace -----
    but I don't understand why the lost connection problem (bug 3816595 A processstate dump is produced for a lost connection (12152) ) is caused by len of row
    Anybody have some idea ?
    Thank you

    My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.Do you get any error?
    If the query length is a problem, you could create a view and query the view instead to see if this problem is resolved.

  • Updated to Windows 8.1, Having Problems with Touchscree​n, Bluetooth, and Mouse

    So, I'm having a few problems that I've tried googling and even looking through all these threads about the same problems but I can't seem to find someone (HP tech OR User) with a solution.
    I have a few problems:
    1) Touchscreen doesn't work anymore
    2) Mouse pointer does not appear on screen anymore (It's not "invisible" it's just completely not there)
    3) Bluetooth file transfer from my phone (Galaxy Note 3) to laptop and vice versa does NOT work
    There are also a few things that I've already tried:
    1) Hardware and Software troubleshoot
    2) Updating drivers
    3) Removing and re-installing programs (Synaptic)
    4) Connecting to a mouse (which solves the mouse problem, but when disconnected, the moust pointer is stuck where it was last pointing)
    5) Restarting the laptop (multiple times into different modes)
    My laptop is the HP ENVY TouchSmart m6-k025dx Sleekbook (Energy Star)
    And I've only had the laptop for a few months. EVERYTHING was GREAT until I updated the stupid Windows 8.1 update. I've been sitting here for a good week now trying to figure out a way to fix this. Really about to throw this out the window.
    PLEASEEEE AND THANK YOU!

    Hello amykwon0520,
    Welcome to the HP Forums.
    I see that you've updated from Windows 8 to 8.1. That since doing so you have three primary issues with the Notebook. I will do my best to help you with this.
    I thank you for provide the amount of information you have. I do have a few questions for you to start with though.
    1) After updating to Win 8.1, did you make sure that all updates were completed? (Please check to make sure all Windows updates are completed, as well as using the HP Support Assistant to verify drive updates are completed.)
    2) The driver updates that you've complete. What driver's have you updated? Where did you do the updates from? (device manager, downloaded from online, ect..) If downloaded, was it form this page: HP ENVY TouchSmart m6-k025dx Sleekbook Drivers?
    3) Did everything work correctly prior to the updates to 8.1?
    To address the issues that you mention having since doing the update, I have a document for each one that may help you with resolve it.
    1) TouchScreen not working - Please following the troubleshooting in this document: Troubleshooting Touch Screen Issues in Windows 8.
    2) Mouse point not appearing on screen/touchpad not responding - Please following the suggestions in this document: Using and Troubleshooting the TouchPad or ClickPad (Windows 8).
    3) Bluetooth and file transfers - Please refer to this document: Using Bluetooth Devices (Windows 8).
    *Note* All documents say Windows 8, but the steps do apply to 8.1 as well.
    Try the documents for each issue and let me know if they are able to help you resolve the individual issues. Also, if you need further assistance please reply with answer to my questions above. I hope this is all able to help you out.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Trying to install Itunes on windows 7 and having problems with windows installer

    Trying to upgrade itunes 9 to 10 and updates through itunes have been unsuccessful. I have downloaded itunes 10 from Apple but when trying to install it on my computer I get the error message: " The windows installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windows installer is not correctly installed. Contact your support personnel for assistance."
    I also cannot uninstall itunes 9 as I get the same message.
    Any ideas? I got an ipod touch for my birthday and I want to use it!!!!

    Hi, I'm new here...from Malaysia. I also hav this problems last night...b4 that my iTunes working is ok...but last night i would like to connect my iPad to iTunes...there was an error Apple Application Support error2...
    i had use the way teach bu b nior...but there was another erro when the installation of "AppleMobileDeviceSupport64.msi"
    the error is "Service'Apple Mobile Device'(Apple Mobile Device) failed to start, Verify that you sufficient privileges to start system services."
    what should i do now?

  • Having problems with firefox 4 using creloaded (oscommerce cart) it is turning the price weight section etc into a table which can not be edited.

    As above to be honest but the entire section of the top of the product add is uneditable and all information is set to zero. Which means I can no longer add products correctly to my website.

    unfortunately there are tons of people with this issue but Apple has not given any answers for us to fix this issue yet. I wish they would allocate more people to solving these problems when they roll out new versions of itunes along with new hardware.

  • Can I get back my previous vrsion of firefox? The new one is having problems with my most used site.

    CafeWorld on facebook. Certain features are a problem. The older firefox version was better with this.

    To revert to the previous secure version, please do the following.
    * Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.17] and download it to the desktop.
    * Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').
    * Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
    * Finally run the installation file you downloaded to the desktop earlier.
    Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.
    After you downgrade, update these two plugins.
    * Adobe Flash via http://get.adobe.com/flashplayer/
    * Adobe Shockwave For Director via http://get.adobe.com/shockwave/
    The version of Flash you have installed at the moment is a security risk. See http://www.adobe.com/support/security/advisories/apsa11-02.html

  • Having problem with correct color using Photoshop Elements 9 and Hp photosmart c6150.

    Have been trying to print pictures from PSE9 to HP Photosmart C6150 and the colors are overly red and not the same as the original photo.  I tried to get the ICC profile online without any success.  How do I setup my color management on PSE9 and my C6150 to get the best pictures.  I am using HP Premium Plus Photot Paper.

    Delete the editor's preferences: quit it, then restart it (use the button in the welcome screen or organizer) while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • Having problem with simple variable use in another class

    I have a variable made by input from my main class file called upperLimit. I have an external class file in which I would like to use the variable created by the input for upperLimit, but I have forgotten how to go about it. The objective of the program is to output all perfect numbers from 1-upperLimit.
    This is my main class:
    import java.util.Scanner;
    public class Lab13aab
    public static void main(String args[])
    System.out.print("In the range of [1-10000] what will the upper limit be for analysis? ===> ");
    Scanner input = new Scanner(System.in);
    int upperLimit = input.nextInt();
    System.out.println();
    checkToSee isItPerfect = new checkToSee();
    int numToCheck;
    for(numToCheck=1; numToCheck>=upperLimit; numToCheck++)
    isItPerfect.analyze();
    }and this is my external class which checks to see if an individual number is a perfect number or not:
    public class checkToSee
    public void analyze()
    int total=1;
    int factor;
    for(factor=2;factor<upperLimit;factor+…
    if(upperLimit%factor==0)
    total = total + factor;
    if(total==upperLimit)
    System.out.println(upperLimit + " is a perfect number!");
    System.out.println();
    }

    Hy Why ;-)!
    Let me guess... you're both new to Java AND Object Orientation? Because you're code (apart from the fact that it is not working) is purely procedural and has nothing to do with object orientation (at least most of it). Have you programmed in C/C++ before?
    See the [The Java Tutorial|http://java.sun.com/docs/books/tutorial/java/javaOO/index.html] for more infos...
    Greetz, Oliver
    Edited by: Trollhorn on Aug 29, 2009 11:02 AM

  • Im having problems with Safari 5.1.10. I often have several tabs open on screen. And after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?

    Im having problems with Safari 5.1.10. I often have several tabs open and after a while the links/websites become not active. So if click on a tab and want open a previous website it than has to re-load again in the window. Can I change this ?
    Kind regards,
    Faroek Abdoelrahman
    The Netehrlands

    Empty the Safari cache more often.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Quit and relaunch Safari to test.

  • I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    I am having problems with the Preview application.  When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it.   Any ideas on how to resolve this problem?  Thanks for any help

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • Are you having problems with Windows XP Pro and Airport Utility Updates?

    I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

    Well... it worked! :D
    I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
    DryHeat, yeah it was with SP2 but I got it installed now so no worries
    Thanks a lot!

  • I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

    I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1.  Why am I having this problem?

    You can check you Adobe account online to see if the serial number is registered under your account.  If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • Having problems with iTunes on Windows 7 64bit

    I'm having problems with my iTunes with windows 7. I have done everything you possibly can from Apple support section and nothing seems to work.
    Well my problem is that iTunes cannot connect to my iPad or iPhone. Both of these devices work fine with my fathers computers but somehow they don't work on my computer.
    When I connect my iPad to my computer, unknown error will pop from iTunes. And it thinks my iPad is iPhone, wierd (or does iPad have iPhone operating system or something?). It does samething with my iPhone too, unknown error.
    If anyone has had same problems that I do and somehow solved the problem, would you please assist me?

    Well now it seems that I have another problem too. Now my iTunes can't find my iPad at all, no error messages or anything.
    Now the error message was one of these 4: (0xE8000065)(0xE800000a)(0xE800006b)(0xE8000001)
    I can't remember which it was because I can't get any error messages anymore.
    By the way, here is a list of what I have done already to make things work.
    -uninstalled/reinstalled iTunes 9.1 many, many times in different folders too.
    -updated all my drivers
    -checked that windows can find my iPad and it does.
    -Shut down my F-Secure firewall ect. and trying to connect iPad then.
    -I have done everything what you possibly can from this site http://support.apple.com/kb/TS3221
    -my USB ports work fine with every other devices like my 500gb harddrive, mouse, keyboard ect. and I have tried to disconnect every other USB devices except iPad and still not working.
    I'll try deleting my USB drivers now, reinstall them and even if after doing all that and iPad still not connecting to iTunes.. well then it's our of my league, I don't know anything more to do.
    Oh, and by the way. I called to Apple support and they only said that there shouldn't be any problems with Windows 7 and iTunes and they couldn't help me very much.. And my iPad works fine with other computers that are in my house.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

Maybe you are looking for