Having purchased and installed pages after finishing my 30 day trial I now can't save changes to documents, it keeps saying that my trial is over and I need a serial number?  Never got a serial number, any ideas how to rectify this?

Hi, having purchased and installed pages after my 30 day trial had finished I am now unable to save any changes to documents I had created in the trial version.  It says I need a serial number, which I never got when I purchased the pages app.  Does anyone kno how to rectify this, I would be very grateful for any help as I'm currently writing up my thesis and am now unable

Hi, I had the same problem and I found that you don't need a serial number anymore. Here is what I did:
(1)I went to Applications fodder on my Mac. (You can navigate to the Application folder from 'New Finder Window.')
(2) Deleted Pages (installed as part of the free  free trial version) from the Applications Folder. Also deleted 'IWorks' from the Applications folder.
(3) Started AppStore.
(4) Clicked on  Purchases.
(5) Clicked on Pages.
(6) Clicked Install.
(4) repeated (5) and (6) for Numbers and Keynote

Similar Messages

  • Safari status bar disappears.  I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen.  I can not minimize the open page only full screen or close the browser.  Any idea how the rectify this

    Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

    One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
    You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

  • Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

    hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

    BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
    Mylenium

  • HT4972 my computer will not recognise my iphone after installing the latest version of itunes any ideas how to rectify this

    my computer will not recognise my iphone after installing the latest version of itunes any ideas how to fix this

    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

  • Since updating itunes to 10.6.3 my playlists no longer sync to my iphone 4, any ideas how to rectify this?

    The playlists still show in itunes on my pc but they no longer show up on my iphone.  Well one of them does, but a Christmas playlist isn't going to do me much good at this time of year ;D

    I'm sorry I didn't post back earlier, I haven't been using my VPN lately. However, today, I did use it for hours and the problem persisted exactly as explained. I did some more searching and found the following solution on a similar thread. Worked like a charm:
    the vpn daemon has to be restarted. after that it works perfectly.
    1. Open Terminal
    2. Unload the VPN daemon using the following command (for those who don't know, don't include the % sign when typing in Terminal):
    % sudo launchctl unload /System/Library/LaunchDaemons/com.apple.racoon.plist
    Note: After you type the command in, Terminal will give you a warning and ask you if you want to continue. Enter your password and continue.
    3. Reload the VPN daemon in Terminal (again, not typing the % sign) :
    % sudo launchctl load /System/Library/LaunchDaemons/com.apple.racoon.plist
    That should do it! Thank you to everyone who tried to help me. Hopefully this helps others out there...
    P.S. For those that are unfamiliar with terminal. When you type in the commands, that's not a hard return in there before the path /System/Library... etc. The line break is just because the path is too long to fit on that line.
    See the other person's VPN problem thread here:
    https://discussions.apple.com/thread/3173994?start=0&tstart=0

  • All my applications  are in trial mode.  I paid for my student plan and still cant install, keeps saying that my trial has expired and then asks me for serial number which i never recieved. i dont know what to do

    all my applications  are in trial mode.  I paid for my student plan and still cant install, keeps saying that my trial has expired and then asks me for serial number which i never recieved. i dont know what to do

    Hi Alena,
    Please refer to the help document below to fix this error:
    Creative Cloud applications ask for serial number
    Regards,
    Sheena

  • I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

    I cant update my software. It downloads updates , then says, 'an error has occurred and updates have not been installed'. I am now behind 6 months on updates. Any idea how to fix this?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update. Post the log text, please, not a screenshot.
    If there are runs of runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.

  • Mail application fails to indicate the number of new messages. Any ideas how to fix this?

    Ever since I upgraded to to OS 10.6, my Mail application fails to indicate the number of new messages. Any ideas how to fix this? It does, indicate how many new messages arrive on my comcast email account. It only fails to indicate the number of new emails arriving in my @mac.com account.  Strangely enough, my devices--iPad and iPhone--indicate the number of new emails arriving in both accounts.

    Thanks.  While you were replying to my question, I went into notifications and figured
    it out.  Appreciate the quick response!

  • I am trying to install the OS Mavericks upgrade on my MAC and it requests for me to enter an administrator password. I do not use an an administrator password on the machine. Any ideas how to resolve this?

    I am trying to install the OS Mavericks upgrade on my MAC and it requests for me to enter an administrator password. I do not use an an administrator password on the machine. Any ideas how to resolve this?

    If you bought the machine new yourself, and did not enter a password when configuring it, leave the field blank.
    If you bought it used, then you need to reset the password, as described here:
    Apple Article to reset the password

  • Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

    Got to end of trial period for Adobe reader XI and cannot revert back to old version or install another version b/c it says I have a newer more functional version, so now I've got no reader at all and cannot fix. Any ideas how to overcome this?.

    YOu need to be clear about the products you are using, so we can help you. In particular there is no trial of Adobe Reader, it is free and keeps running. Sounds like you are using some versions of Acrobat - which?
    YOu must properly uninstall the trial, don't just delete files or you may get a mess impossible to recover.

  • I tried to install up date 3.6.13 and received error message that I didn't have the right permissions on this mac book , but I am the administrator on my Mac Book Air? Any ideas how to resolve this?

    I tried to install up date 3.6.13 and received error message that I didn't have the system permissions required to install it. I am the administrator on my Mac Book Air? Any ideas how to resolve this?

    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • HT1386 purchased new songs from itunes and when I clicked on the Sync button those new songs are not added to my ipod nano. Have any idea how to resolve this problem?

    purchased new songs from itunes and when I clicked on the Sync button those new songs are not added to my ipod nano. Have any idea how to resolve this problem?

    Do you have the right boxes checked to sync the music to your iPod?
    iTunes: Syncing media content to iOS devices and iPod
    Do they play in iTunes on the computer?
    Have you successfully synced music form this iTunes library/computer before?

  • Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this?  (It worked fine before installing Mavericks)

    Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this?  (It worked fine before installing Mavericks)

    PS: forgot to mention: if your printer is on your wifi network, you'll have to enter your wifi password on the printer to connect it to the network before Printers & Scanners will see it.
    Sometimes a reset of the wifi system is needed too. A full set of directions would be:
    Try:
    uninstall all printer manufacturer apps and "utilities"
    go to System Preferences > Printers & Scanners > Print
    control-click on your printer in the column on the left
    select "Reset Printing System..." and "reset" in the dialog that follows
    do a factory reset on your printer. You'll have to consult the printer manual for how.
    power down everything: modem, router, computer, and printer
    power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
    enter your wifi password in your printer so it can connect to the network
    go back to printers & scanners and it should see your printer and download a driver for it from Apple
    resist the temptation to install any printer manufacturer apps in the future.

  • All websites automatically going to Mobile versions when using safari and firefox (likely started after mavericks update) Anyone have any idea how to fix this?

    Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the  Mavericks update (although I am not 100% sure about the timing).
    Has anyone had this problem? Any idea how to fix this?

    Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the  Mavericks update (although I am not 100% sure about the timing).
    Has anyone had this problem? Any idea how to fix this?

  • Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

    the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

    Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
    - I tested the headphones and speakers on other devices: they work fine.
    - When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
    I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
    What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
    Many thanks indeed!
    NG

Maybe you are looking for

  • How to triple boot (MacOSX / Win7 / Linux) a MacBook Pro (Retina, late 2013) with Refind

    ok it's not a question, it's an howto. You do it at your own risk. No failure reported so far, but I'm not responsible for anything. If you try to multiboot your MacBook Pro (MBP hereafter) you may face a new complexity. With on partition, Bootcamp d

  • Images look different in Lightroom than in Windows viewer

    I just bought a new NEC monitor, but had this problem with my old monitor too.  I'm actually guessing its not a monitor issue at all. When I view and edit an image in Lightroom then export it as a JPG it looks way more red and more saturated in windo

  • Tecra A10-104 0 Need CD-ROM driver for DOS

    Hi - I am after a DOS Driver for the A10 so we can create bootable images for our laptops - We have these Images for the A09 Model - but the A10 Must have a different CD/DVD drive - Is there a Genereic one that we can use? We Have the TEAC DV-W28S-RT

  • Transportable tablespace /imp problem

    Dear all , please i need to correct me if i am wrong transportable tablespace can you done of different version of oracle database (means can do that task from lower to upper ex:10g.2 to 11g.2) take in your consideration the limitation of this taks.?

  • Browse directory structure using JSF

    Hello again.... I am facing a problem with my program. I am trying to open a browse directory window when i click on a button in a jsp page.... Is there any way to do it in JSF????? regards Junaid