Having Trouble Calibrating Playback Offset

I am trying to output to Digibeta and cannot calibrate the playback offset to properly hit the Timecode In point (on tape) using Edit to Tape. It seems that 50% of the time I am 1 frame too late and the other 50% of the time I am 1 frame too early. This leads me to believe that I need to enter a playback offset value of 0.5 (or a half frame) but FCP will not allow this. I did notice that you can set half frame values for Capture Offset but not Playback Offset.
Any help would be appreciated.
Thanks,
Matt
Sony Digibeta A500
MacPro Xeon 3.0G
Kona 3 - 3.4 drivers
Quicktime 7.1.3
XSAN 1.4.1
OSX 10.4.9
FCP 5.1.4
Shake 4.1
Message was edited by: Matt James VFX

http://discussions.apple.com/thread.jspa?messageID=3968587&#3968587
That thread discusses issue related to a NonDropFrame sequence going out to an improperly coded (Drop Frame) tape.
Might be the issue.?.?
Hope it helps.
K

Similar Messages

Having trouble with playback

I'm having a problem with my playback after I render the entire work place and effects area on adobe premiere. When I go to playback the video it plays then the actual video will stop but the music will keep playing then the video will pic back up and start playing again, it dose this multiple times throughout the video. I'm using a HP computer and I have an external hard drive to store all of my videos. What else am I to do to get the video to play properly? Dose it have something to do with the sequence that I have chosen. I am using a t2i Cannon to shoot my videos in 1080p 24fps and will be uploaded to YouTube what sequence should I choose.

>what sequence should I choose
To match your sequence to your video for editing...
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
>external hard drive
If that is a USB2 drive, it is not fast enough for video editing
External eSata or USB3 are both fast enough for video editing... eSata is better -
http://forums.adobe.com/thread/1117813
One example http://www.amazon.com/StarTech-SuperSpeed-Docking-Station-Cooling/dp/B0055PL2YI
And, for future reference, the information you need to include when you ask a question
Information FAQ http://forums.adobe.com/message/4200840

Trying to re ord with a live mic but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?

MartyJames777 wrote:
Trying to record with an external mic, but having trouble getting a good record or playback volume.
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen)

I m having trouble viewing Netflix because it's saying my hdmi doesn't support hdcp

I'm having trouble viewing Netflix it keeps posting that this content requires HDCP for playback.

Can you verify that your TV supports HDCP?

Having trouble opening book up. Says not authorized but I have authorized kobo??

having trouble opening book up on kobo. Says not authorized even though I am??

I Am having the same issue. Ie on the password issue.
I Am using a Macpro though.
i Have had no issues with the setup until recently.
However I think the hard drive is starting to fail as it keeps on losing the wireless connection and gas been stuttering a lot on playback.

I am having trouble with songs that will not play completely through.

I am having trouble with songs that will not finish playback. The songs play about 75% of the way and then stop mid-song. This is true for my PC and songs transferred to my iPod. I have redownloaded (and repaid) for one song to see if that helps, which it did. But that can become expensive as I am starting to find an increasing amount of songs that are haaving this problem.

Take it to a genius bar. It's probably something with the magnets.

Is anyone having trouble syncing photos ?

Some of my photos were messed up digitally, and had color blocks at the top or bottom, lighter areas in half the photo, the bottom half of the photo would be offset by a few pixels and just generally messed up. Some even looked color smeared (best way I can describe what I was seeing). After an exhaustive trial and error campaign, calling tech support once and taking the phone in to an Apple store, I finally have put my finger on the problem (I believe). I am running a Raid 1 setup with two identical drives. Each time I would sync photos to the iPhone I would have the problem. I had recently bought a USB/ATA external drive box and put one of my old harddrives in it that I wanted to recover some photos from. When I would transfer my pictures over to the single USB harddrive, and point iTunes to that location my photos would sync fine. I believe it is the Raid setup that is causing the problem. Raid must handle some files in such a way that Apple did not take in to consideration. I have called this in to tech support. I seem to be the only one with the problem so far.

Each time I would sync photos to the iPhone I
would have the problem. I had recently bought a
USB/ATA external drive box and put one of my old
harddrives in it that I wanted to recover some photos
from. When I would transfer my pictures over to the
single USB harddrive, and point iTunes to that
location my photos would sync fine. I believe it is
the Raid setup that is causing the problem.
What make and model of RAID controller are you using?
Is it an Intel Matrix Storage Manager, or something
else?
b noir,
This is a great post. I am an the IT administrator at my office. 1 of 7 employees were having trouble syncing photo's. All 7 employees are using a version of VIST OS.
I have tried uninstalling, reinstalling, iTunes, Quick Time, Apple Mobile Device Support, and Apple Software Update several times. I deleted/edited registry, turned off all firwalls, etc. I still could not sync photo's. Seeing how this was a ne computer I asked the employee where the photo's were transferred from and she handed me a 60G WD Passport. I then proceeded to sync the photo's directly from the external drive to the iPhone, and.....every photo synced. I was hoping not have to contact apple support, so thanks.

I am having trouble exporting closed captions from premiere cc 2014.

I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
I only used compressor because i switched from final cut to adobe. easy fellas!

I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

I am having trouble with an excel file wanting to save when no changes were made & opening as read only for the 2nd person - but allowing them to save the file.

1) I am having trouble with an excel file wanting to save when no changes were made. As soon as you open the file and exit. It prompts for a save.
All excel versions are 15.0.4701.1002.
Using a table.
the functions CELL, OFFSET, TODAY, INDIRECT, NOW, INFO and RAND are not being used.
2) Same file. 2nd person is being told they are opening the file as read only - but when they are quitting excel prompts them to save the file.
Everything was working fine. I started having problems with Excel, IT wiped my version out and re-installed office.
File is on networked server HP - Windows Server 2012 Essentials.
We are all on Windows 8.1 Pro.
I really hope someone can help - the excel expert had no answer - and passed me along to here.

I copied the whole file and started deleting worksheets one at a time and testing it by closing it and re-opening it then closing it again – to see if it wanted to save.
Once all the pivot tables were deleted – the problem went away.
I found that some of the pivot tables had automatic refresh upon open, so this caused the excel to think data had changed.
It is fixed now. By clicking on one cell of the pivot table, analyze, options, data and uncheck the 3<sup>rd</sup> square down to not automatically refresh. NOT A NETWORK ISSUE.

Having trouble with camera profiles in LR3

Anyone having trouble with accessing the camera profiles from the drop down menu in the develop module/camera calibration section of LR3? The only choice I have is "embedded." After I created a custom with passport color checker it now only offers "profile" as a choice. ANy thoughts?
Thanks,
Tom

Okay, that is different. I have seen a similar discussion in another thread (I think) in the Lightroom forum. It might have been this one. It seems to have been specific to Canon cameras. I don't have an answer. Just one question, however. Are you using standard CR2 files, or are you using the sRaw format? As I was reading the other thread, I was wondering if that could have been part of the problem.

I have been having trouble burning a DVD.

I have been having trouble burning a DVD. It goes through all the steps until it gets to the multiplexing "burn" step and then with 3 minutes left the disk pops out. The disk is left empty and an error comes up. I have been able to burn DVD's before, so this is frustrating.

Well - not correct answer as I understands it - This is a very complex question. In my case I'de put a button just touching the TV-Safe area boarder. Moving it a minute inside and the Error disappeared.
BUT - there are so many other things that I collected a long long list on this - read and see if You find help here.
Multiplexing Error
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
Chapters !
A. Using strange letters in video project name eg +,/; etc. keep to a-z and 0-9 strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
*One user more writes*
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous trys, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no mulitplex error
As a final experiment, I moved "bad" chapter mark about 5-10 secs beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplexer Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Yours Bengt W

Im having trouble playing games, dvds and youtube videos. any help?

Im having trouble playing CD games on my Mac. They open and then close right away everything i need is downloaded. I have trouble watching some YouTube videos. Some play and then the others either go in slow motion or dont play at all. I also am having trouble playing DVDs. the DVD play opens then says that "a valid video device could not be found for playback". If anyone can help me out that wpuld be great.

For server issues try using OpenDNS servers. System Preferences>Network>Advanced>DNS.
Click on the + in the left column and insert the following:
208.67.222.222
208.67.220.220
Click OK, then click Apply
For you reference: http://www.opendns.com
Actually 10.8.3 is snappier than before. Even Safari (updated). Boot to your ML recovery disk and run Repair Disk from Disk Utility.

Recording Audio Playback offset/delayed

As a loyal Logic member since version 7, I recently started having a problem when playing back audio tracks. The audio seems to playback behind the beat. Is there a recording playback offset or delay option perhaps I accidently switch on or altered?
Please help.
Terrytagg

Are these recently recorded audio tracks?
If so.. look at: Preferences/Audio See the "Record Delay" adjustment? It should be set to zero.
PlugIn Delay Compensation should be set to: Audio and Sortware Instrument Tracks.
Low Latency Mode disabled.

Having trouble charging the battery

I have a 15 inch Mackbook Pro that I am having trouble getting the battery to charge. I tried resetting the PMU and it still is having problems. I can leave the computer charging all night while it is off and in the morning I'll still only have a 50 percent charge. Do I need a new battery?

as suggested, make sure you try a re-calibration first. If that doesn't work go here:
http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Make sure you install the battery update first and proceed from there.
there are known issues with certain older MBP batteries -AND-, important to note, Applecare and warranty are irrelevant. They will replace the battery if it meets the criteria on the above site.. period.
I just had mine replaced on an over 2 year old MBP 2.0 with no Applecare.
hope this helps.
- sean

Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
    [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    TouchP-150M    Application (/Applications/Canon P-150M/TouchP-150M.app)
    iPhoto    Application (/Applications/iPhoto.app)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    NTFS-3G [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
    Destinations:
        My Passport Edge for Mac [Local]
        Total size: 499.94 GB
        Total number of backups: 27
        Oldest backup: 2013-01-31 21:15:26 +0000
        Last backup: 2015-05-02 11:33:09 +0000
        Size of backup disk: Adequate
            Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    fontd
         2%    VShieldScanManager
         0%    taskgated
         0%    notifyd
Top Processes by Memory: ℹ️
    745 MB    Google Chrome Helper(8)
    439 MB    kernel_task
    246 MB    VShieldScanner(3)
    160 MB    Google Chrome
    127 MB    Finder
Virtual Memory Information: ℹ️
    130 MB    Free RAM
    3.87 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 09:30:08 PM    Self test - passed
    May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
    May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
    May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
    May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
    May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
    May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
    May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
    May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
    May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
    May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
    May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
    May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
    May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
    May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
    May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
    May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
    May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
    May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
    May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
    May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
    May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
    May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
    May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
    May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
    May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
    May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
    Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Having Trouble Calibrating Playback Offset

Similar Messages

Maybe you are looking for