Having trouble getting a simple comp to render... BeachBalling for no apparent reason. AE CC 2014

i have a seemingly simple project that is causing seemingly random render problems.
i am running top of the line MacPro, Yosimite, AE CC 2014. its a simple 2.5D comp with video and still assets.
thought i may have overcome the problem by shortening some file names - i recall this having an adverse effect in previous AE version, but no joy.
help.!

FAQ: What information should I provide?
For weird technical things like this, we will need tons of information. Is it CC 2014.2? Do you have ray-traced renderer turned on in your comp settings by accident?

Similar Messages

Having trouble getting waf to create a pc file for pkg-config

Hello Arch Linux forums!
After successfully building and installing some monome tools on my debian machine, I thought I'd migrate over to developing things on arch linux.
However, I'm having trouble building my project because pkg-config cannot find libmonome after a fresh build. It complains that there's no libmonome.pc in my $PKG_CONFIG_PATH. Sure enough, libmonome.pc does not exist, while it does on my debian machine.
I suspect it's some sort of permissions / path issue that I need to account for, but I'm unaware as to where to start looking. Has anyone else used waf and encountered similar issues?
Thanks in advance!

Well the configuration file you chose does not allow users created in NetWeaver to be created in the LDAP. That's why it's a "readonly" configuration. I would guess that you need a custom configuration file specifically for open ldap.
This should help get you started on a custom configuration file:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
Then again, if the only problem with the .XML file you chose is that you can't write to the LDAP, give the dataSourceConfiguration_ads_writeable_db.xml configuration file a shot.

New to CS6 Dreamweaver, creating a "Responsive Website" having trouble getting fluid divs to behave

Trying to create a "Responsive Website" and I'm having trouble getting my fluid divs that I create to "break" their link from the "Boilerplate" .
I'm using a "Fluid Grid layout Div" to create a section that has a transparent background of rgba(0,0,0,0.3) and that's perfect, then I add two more "Fluid Grid layout Div's" inside the transparent one to create a 2-column part in the section and that's where the trouble is.
None of the "formatting" I've set for the text in my ID's or Classes are being used - just reverts to what's in the "Boilerplate" i.e. "p,h2,h3" and I can't get it to "break" it's link the "Boilerplate" so I can apply my formatting.
I have been able to select my formatting at times but it is ignored and uses what's in the "Boilerplate".
Kept trying different ways to get it to work and now I've so many of both the ID's and Class's that their not all showing up as an option to be able select them.
I'm missing something basic and after two days it still escapes me.
Please somebody, tell me what I'm missing.
Frustrated

FluidGrid Layouts are not easy to learn. You need a good grasp of fundamental RWD concepts including CSS Media Queries. Keep your layout simple and be patient. The first time I used FGLayouts, I had to start over 9 times before I got acceptable results.
Responsive Web Design
http://coding.smashingmagazine.com/2011/01/12/guidelines-for-responsive-web-design/
Introduction to CSS Media Queries
http://www.adobe.com/devnet/dreamweaver/articles/introducing-media-queries.html
CS6 Fluid Grid layouts (17 min video)
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layouts/
Best advice for beginners:
Build Mobile Layout first. Everything else is based on this primary layout. Then build Tablet layout and finally Desktop. Don't worry about content. Just build the layout & save often during development.
DO NOT TAMPER with the boilerplate.css or FGLayout.css code. Even experts can break the layout in a hurry. Use a separate external style sheet for content and typography styles.
If you're using CS6 ver 12.0, you cannot nest divs inside other divs. Everything must be inside the .gridContainer like this:
<body>
    <div class="gridContainer">
          <div> </div>
          <div> </div>
          <div> </div>
    </div>
</body>
If you care to post a link to your online test page, we can take a look and possibly offer more suggestions.
Nancy O.

For people having trouble getting their Zens to be recognis

If you're having trouble getting your Zen up and running, seriously, go to this thread. http://forums.creative.com/creativel...essage.id=8429?So many people have gotten their Zens to work by using these methods, and the thread should've been stickied on these boards long ago. It will help stop all the unanswered questions. Ozzey

Sorry for the slow reply. Yes, the fixes are for those V that are not recognised when plugged into a usb port. You should take the advice from altheus:?Simple solution that should work...
Download Windows Media Player from here: http://www.microsoft.com/windows/windowsmedia/player/download/download.aspx
With a program such as WinRAR or WinZIP extract the file "wmp-windowsxp-x86-enu.exe"
There should be a few EXE files:
wmp.exe ::: Windows Media Player Program Files
wmfdist.exe ::: Windows Media Player Distribution Pack
umdf.exe ::: User-mode Driver Framework (THE IMPORTANT ONE!!!)
Run them in this order.
Uninstall the previous MTP driver that has failed, and then restart.
Connect your Zen and it should detect and work perfectly!
PS. You don't need to have install the Validation thing for this to work. This seemed to be the one that helped most people. If that doesn't work, go to the Microsoft and look for "issues with Zen Potarble devices". It will tell you how to rollback to WMP0 (if you are using ) so that?it will recognise the V, and then reinstall MP, or just stay with 0, your preference. P.S. For this fix, you will?need to extract?the files of WMP Beta . Beta 2 and Final don't have it.Message Edited by Ozzey on 2-08-200606:54 PM

TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?

These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have an older IPOD that I'm having trouble getting new purchases on to my IPOD. I use to have a source list on the left hand side of screen where I dragged my purchases to and they downloaded. Can't find place to check manual vs. auto sync.

I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.

G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)?

I have been having trouble getting my email on my iPad. It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it. I can send emails, but can't get them

I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?

Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon

"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."

Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?

Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

Having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number.

I am having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number. I recently installed Windows 8, 64 bit on a second solid state HD on my computer (had a virus problem for which I had to format C and reinstall everything). The new ss HD is drive C and my operating system and my programs are all installed there. All my documents and files are now stored on my original, reformatted drive, which is now drive D. I was using Windows 7, 64 bit. Could all this be the reason my serial number is not being recognized? PHH

Hi 48phh,
Yes Lightroom 5 takes the Serial Number of each previous version and you can do the Upgrade from any 1, 2 3, or 4 version of Lightroom,but somethig different for the Upgrade from the Mac App Store ... see how here: http://helpx.adobe.com/lightroom/kb/upgrade-mac-app-version-lightroom.html
you installed Windows 8 and installing only the operating system, but keeping all the app certainly and during the operation something can be lost, especially if you run Clean after installing the system by deleting the folder containing the old system, it's better to wait to do so.
However, no problem, because to do the 'Upgrade all you need is the old serial number and don't need Lightroom4 to be installed on your machine ...
more details here: http://blogs.adobe.com/lightroomjournal/2013/06/lightroom-5-hot-issues.html

I'm having trouble getting music from itunes on computer to my iphone?

I'm having trouble getting music from itunes on my computer library to my iphone can someone please tell me what i'm doing wrong?

Hi ckwools,
Welcome to the Support Communities!
What is the specific issue? Are you getting an error message? The article below will provide some general information on syncing with iTunes:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Cheers,
- Judy

TS1424 I am having trouble getting Itunes to open

I am having trouble getting ITUNES to work I have deleted itunes and everything associated with it and reinstalled and I still get the same errors,
The application has failed to start because of MSVCR80.DLL
INTUNES WAS NOT INSTALLED CORRECTLY ERROR 7
THIS APPLICATION FAILED TO START BECAUSE ICUDT49.DLL WAS NOT FOUND

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Having trouble getting a simple comp to render... BeachBalling for no apparent reason. AE CC 2014

Similar Messages

Maybe you are looking for