HCM Process and Forms - Authorization issue

Hi Experts,
I have to developed one HCM process and forms for leave request. Workflow is assigned to the form. When I test the Process with in the R/3 using Txn 'HRASR_TEST_PROCESS' I got the Error, Work Item Not Found; Workflow Not Started" and "Process Object Not Created".
Then I tested the same Process with the user who is having SAP_ALL role and now the workflow is triggered and can able to see the work item in the portal UWL. With SAP_ALL everything was fine.
But my client will not give SAP_ALL role to all users. So I need to find, what are the roles and authorization objects need to execute the HCM process and forms.
I checked the Help documentation, and I found P_ASRCONT is needed for HCM forms and process. So I assigned to the user but still, the forms getting error.
Thanks,
Helps will be highly appreciated.

Thanks for your reply.
Transactions su53,st01 and st05 didn't help.
Any tables or specific transaction for HCM process and forms will be helpful.
Thanks.

Similar Messages

HCM Process and Forms - Changes to Form Issue

We have a scenario within HCM processes and forms where the changes being made by an intermediate approval step is not being sent to the next level approver. For example, in a pay change the initiating manager sends the pay change to his/her boss for approval, then once approved the form is sent to HR for final approval and update into R/3.
In this scenario the initiating manager starts the process and makes appropriate updates to the form (including comments). This then routes to that manager's manager for updates/approval. When processing the form, the approving manager can see the information input by the initiating manager. The approving manager then has the opportunity to make appropriate changes within the form and add comments before it is approved and sent to HR for final approval.
Once the approving manager makes changes and sends this to HR, when HR processes the form they see the changes as if it was sent by initiating manager (HR does not see the changes made by the approving manager).
I appreciate any insight you may have on this issue.
Regards,
Brad

Sounds like you process is designed incorrectly and your are having problems with your process object integrity. You need to be careful with loops/branches when designing your process. Are you doing it all in the same Form Scenario and just using multiple steps? The form scenario will "share" the "data" hence you can have issues. You can split it to a differnt form scenario and pass the data over from the other FS to your FS. Then you know you will have your own data there. I often see people trying to do their whole process within one form scenario and use multiple steps without realizing the data integrity issues with that.
Hope this helps.

Workflow issue in HCM Process and Forms

Hi,
I have created one workflow for HCM Process and form ( Termination) . In that workflow, there are Two levels. First and second level is approved by the respective managers. I am using the Standard TASK TS17900100 both levels having the Send, "BACK TO AUTHOR" option.
When I initiate the form it has generated the process reference number, it went to first level approval and the respective manger received work item in his UWL inbox in this stage I have checked in backend (PA20) infotypes( 0 & 1) are updating automatically and employee has been terminated without approval of work item.
I have checked in workflow log the work item has with first level manger only.
any one please help me on this.
Regards,
Srujan

Hi,
TS17900101 uses --> CL_HRASR00_WF_COMPONENTS / Method WI_EXECUTION_VIA_R3_INBOX.
In the text of the method you can read the following:
It is only allowed to trigger a WI via UWL which does not execute
that method which was customized at the corresponding task (so this
method). To ensure this if the WI was startet via R3 Inbox then
exactly this method is called to present an error.
So, are you approving from UWL or SBWP?
Regards,

WS17900260 - Task TS17900108 resulted in error, in HCM Processes and Forms

Hi,
I have designed a HCM process and workflow. In custom workflow ,WS17900260 (TS17900108) has been used to save data. In this step it is resulting in error and shows the below message in "Step History" tab. No message in Message Tab.
Work item 000000172044: Object CL_HRASR00_WF_COMPONENTS method SAVE_FORM_DATA_TO_DB cannot be exe
Message no. WL821
An exception with the type CX_HRASR00_PROCESS_MODE LLING occurred, but was neither handled locally.
I tried executing the associated method and I did not get any error. Please let me know if anyone has faced this issue and how it is resolved.
Thanks,
Sri

Hi Sri
Expecting a prompt answer in 2 hours time is a tad too demanding for all of us
We try to help you based on our experience and if we do not have it, we just wait for the right one to respond.
It is not that I have experience in HCM Processes and Forms, but a little bit of googling to help you gave me the following:
1) SAP Help for your task TS17900108 states that it has the same requirements for binding as that of task TS17900107 .... check the latter half of the page here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f28f8a1e5132c3e10000000a1553f6/content.htm
2) If you check TS17900107 binding requirements, it needs certain necessary parameters which may be causing the issue. Check the mandatory requirements here:
https://help.sap.com/saphelp_erp60_sp/helpdata/en/42/f2cf2c249b3268e10000000a1553f6/content.htm
Also check for authorizations
3) See how another user solved the issue with the same method here:
http://scn.sap.com/thread/1753027
4) See the possible advice for a similar issue with task TS17900107 (which is kind of similar to your task)
Novice in HR forms and processes workflow - help in usage of TS17900110
I checked various threads and the common link is that it all depends on your system and the bindings or the custom functions called within. Also do check for authorizations as mentioned in the first link from Help.sap.com
I am sorry, I cannot give you further details because I myself do not have experience in HCM P&F. I am sure you too can google further from here, or we can be a little more patient for others to reply (I understand that some issues are critical and need immediate resolution, but we all are busy in our own projects and sometimes are not able to reply immediately).
Regards,
Modak

Portal PCR and HCM Process and Forms.

Hello,
We have a request from client that they want to use SAP Personal Change Request (PCR) in MSS role.
So when we tried to configure it, A error was thrown to us as :
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
u2026u2026
Caused by: com.sap.tc.webdynpro.services.exceptions.PDFDocumentCreationException: ../../sap.com/msspcr/PcrApplication/wd_key48u2026..
So after looking for the cause of error we came to know that this requires an ADS (Adobe Document Service) to be activated.
Now we came to know that it requires some additional licence from SAP (Please verify this statement....if anybody has faced this issue)
So we now decide to use HCM Process and Forms for our client...
How ever when we try to access that in portal it says "Resource not Found".
After looking for the same in SAP help we came to know that it requires some
Business Package for HR Administrator (SAP ERP)
HR Administrative Services (PA-AS).
Now how can I know that whether we have these components already deployed in Portal / R3.
And if I get them, then will there be again a need for ADS (Adobe Document Service).
Please comment on the same.
Thanking you in anticipation.

Hi Saurabh,
Yes the error you are getting is for the ADS and interactive forms does have additional licenses for online forms but this totally depends on the package that you use.
For e.g IF you have SAP E.C.C 6.0 with Ehp4 then there are standard HCM processes and forms available that comes with the package .
In this case you can check in your sandbox if the sample processes works and verify with SAP for the usage.Since the cost depends on per form per user basis.
Note :
For SAP supplied interactive forms, no additional cost.
As for custom interactive forms, there is an additional cost.
For checking if HCM processes and forms are available in your system :
You could go for the t.code HRASR_DT or Configuration of Design Time can be accessed in the IMG under Personnel Management > HR Administrative Services > Configuration of Forms/Process.
However you need to check with the BASIS and portal guys for roles and authorizations.
Hope this info helps.
Regards,
Aravind.P

Error while Accessing the HCM process and forms

Hi All,
We have implemented HCm process and forms. Everything was working fine earlier but for past few days we are facing an issue after selecting an employee and clicks on the select process we are getting the following error. Kindly povide the solution.
The following error text was processed in the system GOA : Component Usage OADP_USAGE Does Not Have an Active Component
The error occurred on the application server sapgoa_GOA_37 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: ENSURE_ACTIVE_COMPONENT of program CL_WDR_COMPONENT_USAGE========CP
Method: GET_INTF_CONTROLLER_INTERNAL of program CL_WDR_COMPONENT_USAGE========CP
Method: IFWDR_INTERNAL_API~GET_INTERFACE_CTLR_DELEGATE of program SAPLWDR_RG_PROXY_FACTORY
Thanks & Regards,
Sreelatha Gullapalli.

Hi,
In EhP4, the employee search is created using OADP framework . And if the relevant configuration is not maintained , I mean there is a view cluster where the applications (PA/PD) and relevant object types are maintained.
If this is not maintained, this creates a error. Please check .
Hope this helps.
Best Regards
Saujanya

Workflow could not start in HCM process and Forms

Hi All
It would be really helpful if you can suggest possible solution regarding case management case in HCM forms and process.
I have set up a simple custom HCM process and Form regarding Infotype 2 updation. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
Executing flow work item - Transaction brackets of the workflow has been damaged
Exception occurred - Error when starting work item 000000007031
PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
CREATE - Error when creating a component of type 'Step'
CREATE_WIM_HANDLE - Error when creating a work item
CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
EVENT_RAISED - Error updating the process object
Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
EVENT_RAISED - Error updating the process object
Executing flow work item - Transaction brackets of the workflow has been damaged
Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
I have searched few SAP notes such as 1384961 which talks about same error but it is implemented in our system (EA-HR 604 , Patch 27, )
Appreciate any help.
Thanks
Umang

Hi Swati
One of the similar (not exact) issues were resolved by correcting the event linkage....please refer thread:
http://scn.sap.com/message/14848795#14848795
Not sure of the details of the the resolution, maybe Ragavendran Kanagaraj can throw more light.
Just some high level checks (if not done already):
Check event linkage errors in SWEQADM if anything is related to your WF
Check in SWEL if it's showing any more details (not sure if it will)
Any warnings in syntax check of WF template (PFTC) or WF definition (SWDD)
Any error sin binding
regards,
Modak

Query on HCM Processes and Forms

Hi
I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
Basket #1
I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
Basket #2
In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
I would appreciate any advise on ways and means to overcome these errors.
Thanks
Subhash

Have you been able to fix your issue in Basket # 2 ?

Dynamic navigation, on HCM Process and Forms "Web Dynpro FORM"

Hi,
I'm trying to solve an issue regarding dynamic navigation, on a enhacement done at the Web Dynpro ABAP QISR_UI component for HCM Process and Forms.
I'm hiding the Adobe Form, and doing "do_dynamic_navigation" for a dynamic generated view container present at the VIEWSHOWFORM on the QISR_UI component.
The code works great, i.e.: the Adobe Form remains hidden and the custom form, using Web Dynpro appears.
I'm also using the HRASR00_PROCESS_EXECUTE_1 component to execute a Portal IView (Floorplan based component).
When the process is started, and the folowing actions are executed:
1- Select Employee
2- Select Process
3- Edit form
4- Press back (for example if the wrong process is selected)
5- Select the Process
6- Edit form again
There is a NULL exception, the "embedding_vca" (below) is NULL
SAPLWDR_RUNTIME_REPOSITORY
METHOD: IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT (LCL_VIEW_USA
* method IF_WD_RR_VIEW_USAGE~GET_EMB_VIEW_CNT_ASSIGNMENT
method if_wd_rr_view_usage~get_emb_view_cnt_assignment.
result = me->view_usage->embedding_vca->get_api( ).
endmethod.
"IF_WD_RR_VIEW_USAGE~GET_VIEW_CONTAINER_ASSIGNMENT
Can you guys give me an hand?
Regards

Hello,
Basically what I did was replacing the Adobe Form, by a Web Dynpro component that contains its own form, and associated logic.
Tecnically the steps to acomplish the task were:
1º Development of a component for showing a form. ( I suggest you to start with just a "hello world" or something very basic )
2º Enhance the QISR_UI component (VIEWSHOWFORM view, on the modify view method), something like
if form scenario = XXXXX then
hide the adobe form;
create a custom view container (the problem I had above), and create an instance of the component created on step 1
end if
3º Access the context that the original form returns (you can check the context debugging the VIEWSHORFORM view )
4º Pass the context to the component created..
I can't provide further details on this, I'm sorry...
I do not suggest doing this, this was a requirement so I had to do it... But this requires a lot of workarrounds, and lots of small changes in standard code related with process and forms... It's not, also, a "clean" solution
Regards,
Joã

Workflow Errors in HCM Processes and Forms

Team,
we are facing one issue related to HCM Process and Forms. Recently we have upgraded our HR Package after which workflows used in HCM Forms stopped working though user who is initiating the process has SAP_ALL. We have noticed that workflow is throwing exception at the very first step i.e. PROCESS while importing data container.
What could be the reasons? Appreciate your replies
Thanks & Regards,
Jitesh Talreja

Thanks Arpit,
WF-BATCH already has SAP_ALL. Do we need to assign some additional roles or profiles to this user?
Log says error reading Process Object
Thanks,
Jitesh

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

Execute HCM Process and Forms on Enterprise Portal ?

Hi Experts,
I have done a scenario on Employee Relocation Process with the reference of the tutorial specified in help.sap.com. [Here's the link|http://help.sap.com/erp2005_ehp_04/helpdata/EN/fe/1bd54243063658e10000000a155106/frameset.htm] in HCM Processes and Forms
The following are steps which i have done so far ....! relevant to that tutorial .
1) Created ISR Scenario
2) Created Form Scenario
3) Created Linkage between ISR and Form Scenarios.
4) Checked the consistency of the Linked ISR and Form Scenarios. Everything was fine ...
I have designed the form layout with relevant form fields that are required for the relocation process (HCM Forms) and created a workflow template with all the required steps specified in the tutorial .
Now my questions are as follow's:
1) how to test the HCM process ?
2) In which environments can I test the process ?. Can I test HCM process in Enterprise Portal if yes how ....?
3) In what way thus MSS and ESS are connected to HCM Process and Forms.
I am confused about this, can you experts please explain in details ...!
Use full Answers are rewarded must
Thanks
Mukkalla.sap

Looks like a program error to me.
Running a system on SAP_ALL to make it work cannot be a solution, so do an ST01 trace to find out which authorization exactly is missing and what is checked before the dump, and consider adding it if appropriate.
Cheers,
Julius

Worklow in HCM process and Forms

Hi Gurus,
We have recently upgraded from HR SP level 14 to level 24. After the HRSP upgrade, we find that the workflows used in the HCM process and forms which were working fine earlier are not working now.
To trigger the workflow, I am using the class CL_HRASR00_WF_PROCESS_OBJECT and event TRIGGERED. First, we faced the problem in the standard task TS17900110,which imports the values from form to workflow container.After Implementing the SAP notes suggested by SAP,the workflow got triggered and the values got imported and it is working fine now.
Now we are facing the problem in the 2nd level,where the manager trying to 'Approve or Reject'.The information message is thrown in backend HRASR_DT as, "Work Item not found; check workflow Log".
Standard Task used in the 2nd level TS17900101 to approve/reject.
Can anyone suggest how to proceed on this issue ?
Regards,
Paramasivan Krishnan

Hi Paramasivan Krishnan,
First, welcome you to SCN forum. However, I am afraid you posted on a wrong forum. Here is dedicate to SAP Business One. Not related to HCM.
Thanks,
Gordon

Error in HCM Process and Forms

Hi All,
When I test my HCM process and forms I got the error "Complete the required entry field "Pers.administrator" (P0001-SACHP) " but I've not used this field in my form. I got this error while testing my process. Could you please tell me how to solve this issue?
Thanks and Regards
Basheer

Hi Everyone,
As instructed above, I configured the field GBDAT infotype 0002 to the table V_T588MFPROPC, and it got rid of the error message, but it has not complete resolved the issue, I am reciving the following warning:
Entries in display field "GBDAT" are ignored
Diagnosis
You entered a value in the "GBDAT" field. However, the field is customized as display-only and not for user input.
System Response
The system restores the content of the field as it was before your input.
Procedure
Contact your system administrator.
Procedure for System Administration
User entries in the "GBDAT" field () do not make sense. Correct the settings for the user interface
Anythoughts?
Thanks in advance,
Heather

Isuue in HCM Process and Forms

Hi All,
Before i mention about the issue i am facing i would like to brief about my process. In HCM process and forms i have a form where HRPB will modify the position and submit it. CDT will approve the request, which updates the records in back end.
The whole process i mentioned above was working fine till we upgraded EHP5. But now after the upgrade, i see that when CDT clicks on the send button it does not proceed further. I can see a loading symbol all the time. I even tried setting break points in the class CL_HRASR00_DISPATCHER, which is not getting called. I don't find the process running in SM50 as well.
And wanted to mention that this is happening only in QA system and it is working absolutely fine in DEV. I am sure about all the transports.
I appreciate help on this.
Thank You,
Vijetha.

Hi Paramasivan Krishnan,
First, welcome you to SCN forum. However, I am afraid you posted on a wrong forum. Here is dedicate to SAP Business One. Not related to HCM.
Thanks,
Gordon

HCM Process and Forms - Authorization issue

Similar Messages

Maybe you are looking for