HDV as Snake Oil?

I have just noticed that on Apr 16 in the "Getting Started" forum here, Studio X remarked:
+"Personally, I believe HDV is the video equivalent of snake oil."+
Given Studio X's reputation, this unlikely to be a judgment made lightly.
Would Studio X care to elaborate? I suspect more than a few of us here would genuinely be interested Studio X's reasoning.

At the very best, it's a totally inapt metaphor.
Calling something "snake oil" implies that the product makes claims to which it doesn't live up. Or, more to the point, that it simply doesn't do what it's supposed to do at all.
HDV does precisely what it's supposed to do. It records a high-definition image to tape at a low data rate. (Remember, HDCAM is also 1440 by 1080 with non-square pixels, so the argument that anything less than 1920 isn't really HD has never carried any weight at all with me.)
Does HDV look as good as HDCAM? Of course not. But HDCAM doesn't look as good as HDCAM SR, either, and from 1997 to 2003, HDCAM was the industry-standard for professional HD recording. Sure, you could have chosen to go out to a D6 instead and record totally uncompressed, but hardly anybody did, because the cost was so prohibitive. Until the advent of HDCAM SR, HDCAM — which is technically close to HDV in many respects other than raw bandwidth — was considered good enough.
And yes, back in the late 90s I heard plenty of people claim that HDCAM wasn't "really HD" because of its subsampling and compression. It just turns out those people lost the argument on practical grounds.
I acquire my footage on HDV, using an XL H1. I'm not shooting sports or anything; it's just documentary footage. When finished and downconverted for delivery on standard-def DVD, the footage looks as good as any I've ever seen. Downconverted to 720p for Internet delivery, it holds its own against footage from higher-quality, more expensive sources. At 1080p, an educated observer can tell easily that the footage wasn't shot on HDCAM or HDCAM SR, but since I'm not actually delivering anything at full 1080p resolution right now, I simply don't care.
In a few years, when Blu-ray penetration becomes significant to my producers or when personal computers with screens big enough to show 1080p become commonplace among our audience, I'll make the case to upgrade our gear to something like DVCPRO HD or XDCAM HD422, or whatever the medium-bandwidth acquisition format of the day happens to be. But until then, that would be overkill for me.
So from my point of view, calling HDV "snake oil" is completely nuts, since it does precisely what it's advertised to do in precisely the way it's advertised to do it.

Similar Messages

  • SOA, Snake Oil-oriented Architecture?

    Welcome answers to the following questions quoted from Grady Booch's article,
    <a href="http://www-03.ibm.com/developerworks/blogs/page/gradybooch/20061012">Snake Oil-oriented Architecture</a>:
    -       what distinguishes a good service from a bad one?
    -       what should the granularity of a service be?
    -       when should I offer up a stateless service versus a stateful one?
    -       as for the stateful ones, how to I express their semantics, and how do I ensure their their misuse doesn't corrupt my system?
    -       how do I express the semantics of a society of services (only the most trivial services work in isolation)?
    -       how do I decide upon the semantics of the information transmitted by these services so that locally they are efficient and useful but that also globally they are consistent?
    -       how do I expose some services to some clients and hide them from others?
    -       how do I offer up variants on a service, so that different clients see a different face to that service?
    -       how do I ensure the security of critical services, such that I am confident I'm not opening up holes in my enterprise that will let the bad guys in?
    -       what services should I expose to the world, and what services should I keep hidden? where are services appropriate, and where are they not?
    -       how do I best expose services in a legacy system?
    -       who should own/maintain these services?
    -       are there alternative architectural patterns I should employ instead of services, and where, and why?
    Message was edited by:
            Yibing Wang

    Yibing,
    thanks for the link to the amigo's article.
    I guess your 4th question is supposed to be two questions.
    I will be sitting back, consider(or reconsider some) the questions and come back to this thread and engage in discussing it here.
    One of my favourites is the granularity question which some people try to use to disrupt SOA discussions.
    regards,
    anton

  • Speeding-up FCPX: 'purge' = snake oil or magic cure??

    today, i made a … weird observation:
    I dropped in a SDcard with about 20GBs AVCHD, ~180clips.
    Import, optimize, proxy - my routine, to give my under-powered MacMini 2.26 a chance to handle 1080/50p.
    usually, I do that overnight, knowing, this is a time-consuming process.
    Today, I did it by day - noticing: 2% after 2h ... oooops!
    Just out of curiosity, me no engineer, I launched Activity Monitor.
    ugly: half my RAM blue = inactiv.
    more ugly: 0.2MB free, 600MB swap ....
    Someone told me lately, to type 'PURGE' in Terminal, which will 'free' inactive memory.
    as mentioned: Terminal, Unix, commands - all terra incognita for me!
    5sec later, brave Mini told me 4.5GBs free - aaaand: the activity display within FCPX starts to count beyond snail speed. within ~5h, my 3h footage was imported, optimized and proxy-ed! (that is fast on my machine...... )
    Questions:
    #1) Why does FCPX 'occupy' so much RAM on import? In my humble understanding, it just shovels data from one drive/card to another, plus some minor indexing/read out of meta data (180 clips - that sounds too me not thaaaat much)
    #2) Why doesn't it 'free' that RAM, when starting with activity No2, transcoding?? It still doesn't make use of the additionel, freed 4GBs ... but FCPX transcodes noticeable faster. Activity says: before 5% CPU usage, now 160-180%?
    … or is it just me? (OS 10.84, FCPX 0.8 ) ....
    (my Mac is not in 'mint condition')
    Purge = a wonder??

    innocentius wrote:
    … Coul it be because I always work with short projects? …
    just to be nitpicky:
    it's about the imports/Events, not 'projects' .....
    no, I know what you mean.
    I haven't observed the import process never, ... I know, a quick take to be added to an existing Events gets Imported (=and transcoded), blazing fast - even on my antique hardware.
    It seems so, that larger (no numerical benchmark) imports, large by number and MBs, make my 8GB Ram stumble.
    On another board, I got the advice to import only, and then trigger the transcoding manually.-
    ... in the next weeks, I'll test it, do screenshots, use my stopwatch.
    thanks for sharing your observation!

  • How can I restore the oil resistant oileophobic_coating on my iPad 3?

    Now that my iPad 3 is a few years old the coating on the screen seems to be wearing off I have used nothing but an ultra fine microfiber cloth (the black one that came with my 3GS iPhone )  but an area about 2 inches in diameter has developed that in landscape mode is in the slightly right of centre space that seems to have lost its coating magic. I could not find anything in the manual on this so I thought it best to ask here

    Reading the reviews for products like this on amazon they seem to be either the highly suspicious 5 star better than sliced bread sort or one star total ripoff
    This is repeated for the 5 different products which ranged in price from $10 to $50
    I smell snake oil and since apple is not selling an approved product in their store I wonder if any of them would do any good; or Just make a minor problem that has me using the microfiber cloth several times a day  into a major mess of a sticky screen
    I sure would like to here from the experts on this stuff I mean the coating apple uses when they build them.

  • Camcorders for Final Cut Studio what to look for?

    Hi i am getting into motion graphics, green screening, and lots of effects. I have been trying to use my isight but it is so hard to key. I have a few question about camcorders as well. This is the only place i could think of to ask.
    Hears what i am planning on getting.
    I want one for around $300 it can be more or less. I am going with 3CCD not 1CCD and Firewire.
    I do not mind mini dv, Hard Drive, or sdcard. But I think that the mini dv ones are cheepers so I was planning on going with that one. When i record it will be to my computer straight through either Final Cut Pro, iMovie HD, or Quicktime. I might once in a while take it somewhere. Which then i would need some form of tape.
    1. When buying a camcorder is it 720x480 or i heard that it is 1280x720. How do i find that out or what does that mean?
    2. Or instead of 3CCD should i get HD however i can't find any HD Camcorders that have firewire? They only have usb.
    3. What does 560K, 600K, 680K, 800K mean?
    4. And how do i tell what the recording resolution is?
    5. What's the difference between CMOS, 1CCD, and 3CCD?

    Hi Macbook
    To take this debate further...
    Yes there are percieved advantages to avchd, with vairable on the fly compression, the encoder has to encode at such a fast rate, should the action within the frame speed up, you are left with a very poor playback of the action.
    With a fixed rate copression, this mihgt not happen, the cost-slightly shorter record times. That is why the sony hvr mini-dv cams come with diffrent settings, hdv/dvcam/dv and the hd/sd tapes both work in the recorder.
    If i was to record a fast moving sport, i would use dvcam or hdv as here in south africa we still use sd. when HD comes along then dvcam hd or HD would be the only option.
    Digital is compression period. only the degree changes. XDCAM also has vairiable compression, I would never use max compression, as this would mean loss of data, not good.
    Good would be a little loss of real color as possible.
    Also with avchd, keeping footage for a long time is a problem. Tape is cheap easy to store, small and can be bought just about anywhere!!!
    I personally have not used a avchd camera, the idea of it sounds good, but from reading the forums for over a year, it is very clear, there is no place in the professional world for "cheap avchd dvd/hdd" cmaeras.
    It is all about marketing, it is about as useful for a cold as snake oil!!!
    If it uses USB to download, it is not good!!!
    Justin

  • Error while trying SSL on OHS

    I'm getting "Init: SSL call to NZ function nzos_OpenWallet failed with error 29248" error in log file HTTP_Server~1 while starting OHS (using opmnctl startall).
    I created a Wallet with auto login option checked. I was able to create certificate Request and got a certificate from verisign (14 days Validity). I imported Root certificate and intermediate certificate from verisign into the wallet and then successfully imported the trial certificate. After saving the wallet in default location I got 2 files (cwallet.sso and ewallet.p12) there.
    Configuration in opmn.xml is :
    <ias-component id="HTTP_Server">
    <process-type id="HTTP_Server" module-id="OHS">
    <environment>
    <variable id="PERL5LIB" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread;$ORACLE_HOME\perl\5.8.3\lib;$ORACLE_HOME\perl\site\5.8.3\lib"/>
    <variable id="PHPRC" value="D:\product\10.1.3\OracleAS_1\Apache\Apache\conf"/>
    <variable id="PATH"
    value="$ORACLE_HOME\Perl\5.8.3\bin\MSWin32-x86-multi-thread" append="true"/>
    </environment>
    <module-data>
    <category id="start-parameters">
    <data id="start-mode" value="ssl-enabled"/>
    </category>
    </module-data>
    <process-set id="HTTP_Server" numprocs="1"/>
    </process-type>
    </ias-component>
    my httpd.conf file is as follows:
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/srm.conf and then D:\product\10.1.3\OracleAS_1\Apache\Apache/conf/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "D:\product\10.1.3\OracleAS_1\Apache\Apache" will be interpreted by the
    # server as "D:\product\10.1.3\OracleAS_1\Apache\Apache/logs/foo.log".
    # NOTE: Where filenames are specified, you must use forward slashes
    # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
    # If a drive letter is omitted, the drive on which Apache.exe is located
    # will be used by default. It is recommended that you always supply
    # an explicit drive letter in absolute paths, however, to avoid
    # confusion.
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache"
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # SendBufferSize: controls setsockopt() call made to set send buffer size on
    # all sockets. Default OS value on most Windows platforms is too small.
    # Larger values can help if the average page size served by OHS is
    # large (~64 k)
    SendBufferSize 16384
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Apache on Win32 always creates one child process to handle requests. If it
    # dies, another child process is created automatically. Within the child
    # process multiple threads handle incoming requests. The next two
    # directives control the behaviour of the threads and processes.
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For Win32, set this value to zero (unlimited)
    # unless advised otherwise.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Number of concurrent threads (i.e., requests) the server will allow.
    # Set this value according to the responsiveness of the server (more
    # requests active at once means they're all handled more slowly) and
    # the amount of system resources you'll allow the server to consume.
    ThreadsPerChild 50
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    #MinSpareServers 5
    #MaxSpareServers 20
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    #MaxClients 150
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 12.34.56.78:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress *
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `apache -l' for the list of already
    # built-in (statically linked and thus always available) modules in your Apache
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.dll
    LoadModule mime_magic_module modules/ApacheModuleMimeMagic.dll
    LoadModule mime_module modules/ApacheModuleMime.dll
    LoadModule dbm_auth_module modules/ApacheModuleAuthDBM.dll
    LoadModule digest_auth_module modules/ApacheModuleAuthDigest.dll
    LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
    LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
    LoadModule digest_module modules/ApacheModuleDigest.dll
    LoadModule expires_module modules/ApacheModuleExpires.dll
    LoadModule headers_module modules/ApacheModuleHeaders.dll
    LoadModule proxy_module modules/ApacheModuleProxy.dll
    LoadModule speling_module modules/ApacheModuleSpeling.dll
    LoadModule status_module modules/ApacheModuleStatus.dll
    LoadModule info_module modules/ApacheModuleInfo.dll
    LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
    LoadModule vhost_alias_module modules/ApacheModuleVhostAlias.dll
    LoadModule agent_log_module modules/ApacheModuleLogAgent.dll
    LoadModule referer_log_module modules/ApacheModuleLogReferer.dll
    LoadModule perl_module modules/ApacheModulePerl.DLL
    LoadModule fastcgi_module modules/ApacheModuleFastCGI.dll
    LoadModule php4_module modules/ApacheModulePHP4.dll
    LoadModule onsint_module modules/ApacheModuleOnsint.dll
    LoadModule wchandshake_module modules/ApacheModuleWchandshake.dll
    ClearModuleList
    AddModule mod_so.c
    AddModule mod_onsint.c
    AddModule mod_mime_magic.c
    AddModule mod_mime.c
    AddModule mod_access.c
    AddModule mod_auth.c
    AddModule mod_negotiation.c
    AddModule mod_include.c
    AddModule mod_autoindex.c
    AddModule mod_dir.c
    AddModule mod_cgi.c
    #AddModule mod_userdir.c
    AddModule mod_alias.c
    AddModule mod_env.c
    AddModule mod_log_config.c
    AddModule mod_asis.c
    AddModule mod_imap.c
    AddModule mod_actions.c
    AddModule mod_setenvif.c
    AddModule mod_isapi.c
    AddModule mod_vhost_alias.c
    AddModule mod_log_referer.c
    AddModule mod_log_agent.c
    AddModule mod_auth_anon.c
    AddModule mod_auth_dbm.c
    AddModule mod_auth_digest.c
    AddModule mod_cern_meta.c
    AddModule mod_digest.c
    AddModule mod_expires.c
    AddModule mod_headers.c
    AddModule mod_proxy.c
    AddModule mod_speling.c
    AddModule mod_info.c
    AddModule mod_status.c
    AddModule mod_usertrack.c
    AddModule mod_perl.c
    AddModule mod_fastcgi.c
    AddModule mod_php4.c
    AddModule mod_wchandshake.c
    <IfDefine SSL>
    LoadModule ossl_module modules/ApacheModuleOSSL.DLL
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # Port: The port to which the standalone server listens. Certain firewall
    # products must be configured before Apache can listen to a specific port.
    # Other running httpd servers will also interfere with this port. Disable
    # all firewall, security, and other services if you encounter problems.
    # To help diagnose problems use the Windows NT command NETSTAT -a
    Port 7777
    Listen 7777
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName IFLMUD5DLHY4G.i-flex.com
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks MultiViews
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    # Under Win32, we do not currently try to determine the home directory of
    # a Windows login, so a format such as that below needs to be used. See
    # the UserDir documentation for details.
    <IfModule mod_userdir.c>
    UserDir "D:\product\10.1.3\OracleAS_1\Apache\Apache\users\"
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName On
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig conf/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    # LogLevel: Control the number of messages logged to the error.log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    # Alternate "common" format to use when fronted by webcache:
    # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
    # When webcache is forwarding requests to OHS, %h becomes the IP of
    # the originating webcache server and the real client IP is stored
    # in the ClientIP header. The common_webcache format can be used
    # in place of the common format when using webcache but with one
    # important caveat: if clients are capable of bypassing webcache
    # then it is possible to spoof the client IP by manually setting
    # the ClientIP header so the %h field should be monitored in such
    # an environment. Another alternative to specifying the ClientIP
    # header directly in a LogFormat is to use the "UseWebCacheIp"
    # directive:
    # UseWebCacheIp On
    # When this is specified, %h is derived internally from the ClientIP
    # header and the access log format does not need to be modified.
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog logs/referer.log referer
    #CustomLog logs/agent.log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog logs/access.log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Apache parses all CGI scripts for the shebang line by default.
    # This comment line, the first line of the script, consists of the symbols
    # pound (#) and exclamation (!) followed by the path of the program that
    # can execute this specific script. For a perl script, with perl.exe in
    # the C:\Program Files\Perl directory, the shebang line should be:
    #!c:/program files/perl/perl
    # Note you mustnot_ indent the actual shebang line, and it must be the
    # first line of the file. Of course, CGI processing must be enabled by
    # the appropriate ScriptAlias or Options ExecCGI directives for the files
    # or directory in question.
    # However, Apache on Windows allows either the Unix behavior above, or can
    # use the Registry to match files by extention. The command to execute
    # a file of this type is retrieved from the registry by the same method as
    # the Windows Explorer would use to handle double-clicking on a file.
    # These script actions can be configured from the Windows Explorer View menu,
    # 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
    # button allows you to modify the Actions, of which Apache 1.3 attempts to
    # perform the 'Open' Action, and failing that it will try the shebang line.
    # This behavior is subject to change in Apache release 2.0.
    # Each mechanism has it's own specific security weaknesses, from the means
    # to run a program you didn't intend the website owner to invoke, and the
    # best method is a matter of great debate.
    # To enable the this Windows specific behavior (and therefore -disable- the
    # equivilant Unix behavior), uncomment the following directive:
    #ScriptInterpreterSource registry
    # The directive above can be placed in individual <Directory> blocks or the
    # .htaccess file, with either the 'registry' (Windows behavior) or 'script'
    # (Unix behavior) option, and will override this server default option.
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /icons/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\icons/"
    Alias /javacachedocs/ "D:\product\10.1.3\OracleAS_1\javacache\javadoc/"
    <IfModule mod_perl.c>
    Alias /perl/ "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin/"
    </IfModule>
    <Directory "icons">
    Options MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin/"
    # "D:\product\10.1.3\OracleAS_1\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    # Note, add the option TrackModified to the IndexOptions default list only
    # if all indexed directories reside on NTFS volumes. The TrackModified flag
    # will report the Last-Modified date to assist caches and proxies to properly
    # track directory changes, but it does not work on FAT volumes.
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage ar .ar
    AddLanguage da .dk .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fi .fi
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage es .es_ES .es
    AddLanguage he .he .iw
    AddLanguage hu .hu
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage ko .ko
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt_BR .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage sk .sk
    AddLanguage sv .sv
    AddLanguage th .th
    AddLanguage tr .tr
    AddLanguage cz .cz .cs
    AddLanguage ro .ro
    AddLanguage ru .ru
    AddLanguage zh-cn .zh_CN
    AddLanguage zh-tw .zh_TW
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    AddType application/x-httpd-php .php .phtml
    AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    #ErrorDocument 404 /missing.html
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost IFLMUD5DLHY4G.i-flex.com IFLMUD5DLHY4G
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # Use name-based virtual hosting.
    #NameVirtualHost *
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]
    # DocumentRoot /www/docs/dummy-host.example.com
    # ServerName dummy-host.example.com
    # ErrorLog logs/dummy-host.example.com-error_log
    # CustomLog logs/dummy-host.example.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    # Required for cgi perl scripts that are run from /cgi-bin/.
    SetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
    <IfModule mod_perl.c>
    # Perl Directives
    # PerlWarn On
    # PerlFreshRestart On
    # PerlSetEnv PERL5OPT Tw
    # PerlSetEnv PERL5LIB "D:\product\10.1.3\OracleAS_1\perl\5.8.3\lib;D:\product\10.1.3\OracleAS_1\perl\site\5.8.3\lib"
    PerlModule Apache
    # PerlModule Apache::Status
    PerlModule Apache::Registry
    # PerlModule Apache::CGI
    # PerlModule Apache::DBI
    # PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    # <Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from localhost
    # </Location>
    </IfModule>
    #Protect WEB-INF directory
    <DirectoryMatch /WEB-INF/>
    Order deny,allow
    Deny from all
    </DirectoryMatch>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fastcgi/"
    ScriptAlias /fcgi-bin/ "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin/"
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\fcgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    SetHandler fastcgi-script
    <IfModule mod_ossl.c>
    SSLOptions +StdEnvVars
    </IfModule>
    </Directory>
    </IfModule>
    # Include the mod_oc4j configuration file
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_oc4j.conf"
    # Include the mod_dms configuration file
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\dms.conf"
    # Loading rewrite_module here so it loads before mod_oc4j
    LoadModule rewrite_module modules/ApacheModuleRewrite.dll
    # Include the SSL definitions and Virtual Host container
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.conf"
    # Include the mod_osso configuration file
    #include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\mod_osso.conf"
    # Include the Oracle configuration file for custom settings
    include "D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\oracle_apache.conf"
    my ssl.conf is as follows:
    <IfDefine SSL>
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First either `none'
    # or `dbm:/path/to/file' for the mechanism to use and
    # second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache dbm:logs\ssl_scache
    #SSLSessionCache shmht:logs\ssl_scache(512000)
    SSLSessionCache shmcb:logs\ssl_scache(512000)
    # SessionCache Timeout:
    # This directive sets the timeout in seconds for the information stored
    # in the global/inter-process SSL Session Cache. It can be set as low as
    # 15 for testing, but should be set to higher values like 300 in real life.
    SSLSessionCacheTimeout 300
    # Semaphore:
    # Configure the path to the mutual explusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex sem
    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog logs\ssl_engine_log
    SSLLogLevel warn
    ## SSL Virtual Host Context
    # NOTE: this value should match the SSL Listen directive set previously in this
    # file otherwise your virtual host will not respond to SSL requests.
    # Some MIME-types for downloading Certificates and CRLs
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    ## SSL Support
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    # NOTE: if virtual hosts are used and you change a port value below
    # from the original value, be sure to update the default port used
    # for your virtual hosts as well.
    Listen 443
    <VirtualHost IFLMUD5DLHY4G.i-flex.com:443>
    # General setup for the virtual host
    DocumentRoot "D:\product\10.1.3\OracleAS_1\Apache\Apache\htdocs"
    ServerName IFLMUD5DLHY4G.i-flex.com
    #ServerAdmin [email protected]
    ErrorLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    TransferLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/access_log 43200"
    Port 443
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
    # Server Wallet:
    # The server wallet contains the server's certificate, private key
    # and trusted certificates. Set SSLWallet at the wallet directory
    # using the syntax: file:<path-to-wallet-directory>
    SSLWallet D:\product\10.1.3\OracleAS_1\Apache\Apache\conf\ssl.wlt\default\ewallet.p12
    #SSLWalletPassword iflex2007
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath conf\ssl.crl
    #SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional and require
    SSLVerifyClient optional
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
    <Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "D:\product\10.1.3\OracleAS_1\Apache\Apache\cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    SetEnvIf User-Agent "MSIE" nokeepalive ssl-unclean-shutdown
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog "|D:\product\10.1.3\OracleAS_1\Apache\Apache\bin\rotatelogs logs/ssl_request_log 43200" \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    </IfDefine>
    Please help me rectifying this error.
    Thanks a lot in advance.

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • Running JSPs through Apache Jserv in OC4J

    hello there -
    I'm hoping someone can help me.
    I want index.jsp, our first page, to ACT like a JSP, rather than the current HTML. It seems that httpd.conf wont access OC4J, so i've attempted to access Jserv. Still, things wont work.
    If someone could please take a look at what i have so far in httpd.conf, more specifically, near the bottom where i've opened up Jserv, and let me know what i'm doing wrong, i'd greatly appreciate it!
    ## httpd.conf -- Apache HTTP server configuration file
    # Based upon the NCSA server configuration files originally by Rob McCool.
    # This is the main Apache server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://www.apache.org/docs/> for detailed information about
    # the directives.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # After this file is processed, the server will look for and process
    # /devl/ics3/devl/apache/srm.conf and then /devl/ics3/devl/apache/access.conf
    # unless you have overridden these with ResourceConfig and/or
    # AccessConfig directives here.
    # The configuration directives are grouped into three basic sections:
    # 1. Directives that control the operation of the Apache server process as a
    # whole (the 'global environment').
    # 2. Directives that define the parameters of the 'main' or 'default' server,
    # which responds to requests that aren't handled by a virtual host.
    # These directives also provide default values for the settings
    # of all virtual hosts.
    # 3. Settings for virtual hosts, which allow Web requests to be sent to
    # different IP addresses or hostnames and have them handled by the
    # same Apache server process.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do not begin
    # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
    # with ServerRoot set to "/usr/local/apache" will be interpreted by the
    # server as "/usr/local/apache/logs/foo.log".
    ### Section 1: Global Environment
    # The directives in this section affect the overall operation of Apache,
    # such as the number of concurrent requests it can handle or where it
    # can find its configuration files.
    # ServerType is either inetd, or standalone. Inetd mode is only supported on
    # Unix platforms.
    ServerType standalone
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # NOTE! If you intend to place this on an NFS (or otherwise network)
    # mounted filesystem then please read the LockFile documentation
    # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
    # you will save yourself a lot of trouble.
    # Do NOT add a slash at the end of the directory path.
    ServerRoot "/oraapp/9iAS10220/home/Apache/Apache"
    # The LockFile directive sets the path to the lockfile used when Apache
    # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
    # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
    # its default value. The main reason for changing it is if the logs
    # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
    # DISK. The PID of the main server process is automatically appended to
    # the filename.
    #LockFile /devl/ics3/devl/apache/logs/httpd.lock
    # PidFile: The file in which the server should record its process
    # identification number when it starts.
    PidFile /devl/ics3/devl/apache/logs/httpd.pid
    # ScoreBoardFile: File used to store internal server process information.
    # Not all architectures require this. But if yours does (you'll know because
    # this file will be created when you run Apache) then you must ensure that
    # no two invocations of Apache share the same scoreboard file.
    ScoreBoardFile /devl/ics3/devl/apache/logs/httpd.scoreboard
    # In the standard configuration, the server will process httpd.conf (this
    # file, specified by the -f command line option), srm.conf, and access.conf
    # in that order. The latter two files are now distributed empty, as it is
    # recommended that all directives be kept in a single file for simplicity.
    # The commented-out values below are the built-in defaults. You can have the
    # server ignore these files altogether by using "/dev/null" (for Unix) or
    # "nul" (for Win32) for the arguments to the directives.
    #ResourceConfig conf/srm.conf
    #AccessConfig conf/access.conf
    # Timeout: The number of seconds before receives and sends time out.
    Timeout 300
    # KeepAlive: Whether or not to allow persistent connections (more than
    # one request per connection). Set to "Off" to deactivate.
    KeepAlive On
    # MaxKeepAliveRequests: The maximum number of requests to allow
    # during a persistent connection. Set to 0 to allow an unlimited amount.
    # We recommend you leave this number high, for maximum performance.
    MaxKeepAliveRequests 100
    # KeepAliveTimeout: Number of seconds to wait for the next request from the
    # same client on the same connection.
    KeepAliveTimeout 15
    # Server-pool size regulation. Rather than making you guess how many
    # server processes you need, Apache dynamically adapts to the load it
    # sees --- that is, it tries to maintain enough server processes to
    # handle the current load, plus a few spare servers to handle transient
    # load spikes (e.g., multiple simultaneous requests from a single
    # Netscape browser).
    # It does this by periodically checking how many servers are waiting
    # for a request. If there are fewer than MinSpareServers, it creates
    # a new spare. If there are more than MaxSpareServers, some of the
    # spares die off. The default values are probably OK for most sites.
    MinSpareServers 1
    MaxSpareServers 2
    # Number of servers to start initially --- should be a reasonable ballpark
    # figure.
    StartServers 1
    # Limit on total number of servers running, i.e., limit on the number
    # of clients who can simultaneously connect --- if this limit is ever
    # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
    # It is intended mainly as a brake to keep a runaway server from taking
    # the system with it as it spirals down...
    MaxClients 150
    # MaxRequestsPerChild: the number of requests each child process is
    # allowed to process before the child dies. The child will exit so
    # as to avoid problems after prolonged use when Apache (and maybe the
    # libraries it uses) leak memory or other resources. On most systems, this
    # isn't really needed, but a few (such as Solaris) do have notable leaks
    # in the libraries. For these platforms, set to something like 10000
    # or so; a setting of 0 means unlimited.
    # NOTE: This value does not include keepalive requests after the initial
    # request per connection. For example, if a child process handles
    # an initial request and 10 subsequent "keptalive" requests, it
    # would only count as 1 request towards this limit.
    MaxRequestsPerChild 0
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, in addition to the default. See also the <VirtualHost>
    # directive.
    #Listen 3000
    #Listen 172.18.4.13:80
    # BindAddress: You can support virtual hosts with this option. This directive
    # is used to tell the server which IP address to listen to. It can either
    # contain "*", an IP address, or a fully qualified Internet domain name.
    # See also the <VirtualHost> and Listen directives.
    #BindAddress 172.18.4.13
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available before they are used.
    # Please read the file README.DSO in the Apache 1.3 distribution for more
    # details about the DSO mechanism and run `httpd -l' for the list of already
    # built-in (statically linked and thus always available) modules in your httpd
    # binary.
    # Note: The order in which modules are loaded is important. Don't change
    # the order below without expert advice.
    # Example:
    # LoadModule foo_module libexec/mod_foo.so
    LoadModule mmap_static_module libexec/mod_mmap_static.so
    LoadModule vhost_alias_module libexec/mod_vhost_alias.so
    LoadModule env_module libexec/mod_env.so
    LoadModule config_log_module libexec/mod_log_config.so
    LoadModule agent_log_module libexec/mod_log_agent.so
    LoadModule referer_log_module libexec/mod_log_referer.so
    LoadModule mime_magic_module libexec/mod_mime_magic.so
    LoadModule mime_module libexec/mod_mime.so
    LoadModule negotiation_module libexec/mod_negotiation.so
    LoadModule status_module libexec/mod_status.so
    LoadModule info_module libexec/mod_info.so
    LoadModule includes_module libexec/mod_include.so
    LoadModule autoindex_module libexec/mod_autoindex.so
    LoadModule dir_module libexec/mod_dir.so
    LoadModule cgi_module libexec/mod_cgi.so
    LoadModule asis_module libexec/mod_asis.so
    LoadModule imap_module libexec/mod_imap.so
    LoadModule action_module libexec/mod_actions.so
    LoadModule speling_module libexec/mod_speling.so
    LoadModule userdir_module libexec/mod_userdir.so
    LoadModule alias_module libexec/mod_alias.so
    LoadModule rewrite_module libexec/mod_rewrite.so
    LoadModule access_module libexec/mod_access.so
    LoadModule auth_module libexec/mod_auth.so
    LoadModule anon_auth_module libexec/mod_auth_anon.so
    LoadModule dbm_auth_module libexec/mod_auth_dbm.so
    LoadModule digest_module libexec/mod_digest.so
    LoadModule proxy_module libexec/libproxy.so
    LoadModule cern_meta_module libexec/mod_cern_meta.so
    LoadModule expires_module libexec/mod_expires.so
    LoadModule headers_module libexec/mod_headers.so
    LoadModule usertrack_module libexec/mod_usertrack.so
    LoadModule example_module libexec/mod_example.so
    LoadModule unique_id_module libexec/mod_unique_id.so
    LoadModule setenvif_module libexec/mod_setenvif.so
    LoadModule oprocmgr_module libexec/liboprocmgr.so
    LoadModule define_module libexec/mod_define.so
    LoadModule dms_module libexec/mod_dms.so
    LoadModule perl_module libexec/libperl.so
    LoadModule fastcgi_module libexec/mod_fastcgi.so
    <IfDefine SSL>
    LoadModule ssl_module libexec/mod_ssl.so
    </IfDefine>
    # ExtendedStatus controls whether Apache will generate "full" status
    # information (ExtendedStatus On) or just basic information (ExtendedStatus
    # Off) when the "server-status" handler is called. The default is Off.
    ExtendedStatus On
    ### Section 2: 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # If your ServerType directive (set earlier in the 'Global Environment'
    # section) is set to "inetd", the next few directives don't have any
    # effect since their settings are defined by the inetd configuration.
    # Skip ahead to the ServerAdmin directive.
    # Port: The port to which the standalone server listens. For
    # ports < 1023, you will need httpd to be run as root initially.
    #Port 7777
    #Listen 7777
    #Port 80
    #Listen 80
    ## SSL Support
    ## When we also provide SSL we have to listen to the
    ## standard HTTP port (see above) and to the HTTPS port
    <IfDefine SSL>
    # Port 80
    Listen 172.18.4.13:80
    Listen 172.18.4.13:443
    </IfDefine>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
    # . On HPUX you may not be able to use shared memory as nobody, and the
    # suggested workaround is to create a user www and use that user.
    # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
    # when the value of (unsigned)Group is above 60000;
    # don't use Group nobody on these systems!
    User ics3devl
    Group ics3devl
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents.
    ServerAdmin [email protected]
    # ServerName allows you to set a host name which is sent back to clients for
    # your server if it's different than the one the program would get (i.e., use
    # "www" instead of the host's real name).
    # Note: You cannot just invent host names and hope they work. The name you
    # define here must be a valid DNS name for your host. If you don't understand
    # this, ask your network administrator.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    # You will have to access it by its address (e.g., http://123.45.67.89/)
    # anyway, and this will make redirections work in a sensible way.
    # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
    # machine always knows itself by this address. If you use Apache strictly for
    # local testing and development, you may use 127.0.0.1 as the server name.
    ServerName 172.18.4.13
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/devl/ics3/devl/webroot/apache"
    # Each directory to which Apache has access, can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # permissions.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/devl/ics3/devl/webroot/apache">
    # This may also be "None", "All", or any combination of "Indexes",
    # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
    # Note that "MultiViews" must be named explicitly --- "Options All"
    # doesn't give it to you.
    Options Indexes FollowSymLinks MultiViews
    # This controls which options the .htaccess files in directories can
    # override. Can also be "All", or any combination of "Options", "FileInfo",
    # "AuthConfig", and "Limit"
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir public_html
    </IfModule>
    # Control access to UserDir directories. The following is an example
    # for a site where these directories are restricted to read-only.
    #<Directory /home/*/public_html>
    # AllowOverride FileInfo AuthConfig Limit
    # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
    # <Limit GET POST OPTIONS PROPFIND>
    # Order allow,deny
    # Allow from all
    # </Limit>
    # <LimitExcept GET POST OPTIONS PROPFIND>
    # Order deny,allow
    # Deny from all
    # </LimitExcept>
    #</Directory>
    # DirectoryIndex: Name of the file or files to use as a pre-written HTML
    # directory index. Separate multiple entries with spaces.
    <IfModule mod_dir.c>
    DirectoryIndex index.html index.jsp
    </IfModule>
    # AccessFileName: The name of the file to look for in each directory
    # for access control information.
    AccessFileName .htaccess
    # The following lines prevent .htaccess files from being viewed by
    # Web clients. Since .htaccess files often contain authorization
    # information, access is disallowed for security reasons. Comment
    # these lines out if you want Web visitors to see the contents of
    # .htaccess files. If you change the AccessFileName directive above,
    # be sure to make the corresponding changes here.
    # Also, folks tend to use names such as .htpasswd for password
    # files, so this will protect those as well.
    <Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    </Files>
    # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
    # document that was negotiated on the basis of content. This asks proxy
    # servers not to cache the document. Uncommenting the following line disables
    # this behavior, and proxies will be allowed to cache the documents.
    #CacheNegotiatedDocs
    # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
    # Apache needs to construct a self-referencing URL (a URL that refers back
    # to the server the response is coming from) it will use ServerName and
    # Port to form a "canonical" name. With this setting off, Apache will
    # use the hostname:port that the client supplied, when possible. This
    # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
    UseCanonicalName off
    # Add 2003/1/3 test for dynamic virtyal host
    # VirtualDocumentRoot /devl/ics3/moff/webroot/oc4j/ct/web/store/%1
    # TypesConfig describes where the mime.types file (or equivalent) is
    # to be found.
    <IfModule mod_mime.c>
    TypesConfig /devl/ics3/moff/apache/mime.types
    </IfModule>
    # DefaultType is the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    # mod_mime_magic is not part of the default server (you have to add
    # it yourself with a LoadModule [see the DSO paragraph in the 'Global
    # Environment' section], or recompile the server and include mod_mime_magic
    # as part of the configuration), so it's enclosed in an <IfModule> container.
    # This means that the MIMEMagicFile directive will only be processed if the
    # module is part of the server.
    <IfModule mod_mime_magic.c>
    MIMEMagicFile /devl/ics3/devl/apache/magic
    </IfModule>
    # HostnameLookups: Log the names of clients or just their IP addresses
    # e.g., www.apache.org (on) or 204.62.129.132 (off).
    # The default is off because it'd be overall better for the net if people
    # had to knowingly turn this feature on, since enabling it means that
    # each client request will result in AT LEAST one lookup request to the
    # nameserver.
    HostnameLookups Off
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you do define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog /devl/ics3/devl/apache/logs/error_log
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you do
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and not in this file.
    CustomLog /devl/ics3/devl/apache/logs/access_log common
    # If you would like to have agent and referer logfiles, uncomment the
    # following directives.
    #CustomLog /devl/ics3/devl/apache/logs/referer_log referer
    #CustomLog /devl/ics3/devl/apache/logs/agent_log agent
    # If you prefer a single logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog /devl/ics3/devl/apache/logs/access_log combined
    # Optionally add a line containing the server version and virtual host
    # name to server-generated pages (error documents, FTP directory listings,
    # mod_status and mod_info output etc., but not CGI generated documents).
    # Set to "EMail" to also include a mailto: link to the ServerAdmin.
    # Set to one of: On | Off | EMail
    ServerSignature On
    # Aliases: Add here as many aliases as you need (with no limit). The format is
    # Alias fakename realname
    <IfModule mod_alias.c>
    # Note that if you include a trailing / on fakename then the server will
    # require it to be present in the URL. So "/icons" isn't aliased in this
    # example, only "/icons/"..
    Alias /icons/ "/oraapp/9iAS10220/home/Apache/Apache/icons/"
    <Directory "/oraapp/9iAS10220/home/Apache/Apache/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    </Directory>
    Alias /jservdocs/ "/oraapp/9iAS10220/home/Apache/Jserv/docs/"
    Alias /soapdocs/ "/oraapp/9iAS10220/home/soap/"
    Alias /perl/ "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin/"
    Alias /images/ "/devl/ics3/devl/webroot/apache/images/"
    Alias /Fc/ "/devl/ics3/devl/webroot/apache/Fc/"
    Alias /html/ "/devl/ics3/devl/webroot/apache/html/"
    Alias /gftlist/ "/devl/ics3/devl/webroot/apache/gftlist/"
    Alias /articles/ "/devl/ics3/devl/webroot/apache/articles/"
    Alias /js/ "/devl/ics3/devl/webroot/apache/js/"
    Alias /css/ "/devl/ics3/devl/webroot/apache/css/"
    Alias /coremetrics/ "/devl/ics3/devl/webroot/apache/coremetrics/"
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the realname directory are treated as applications and
    # run by the server when requested rather than as documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias directives as to
    # Alias.
    ScriptAlias /cgi-bin/ "/devl/ics3/devl/webroot/apache/cgi-bin/"
    ScriptAlias /cyber/ "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi/"
    # "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    <Directory "/usr/cybercash/webroot/collectiblestodaytestsight-16/mck-cgi">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    </IfModule>
    # End of aliases.
    # Redirect allows you to tell clients about documents which used to exist in
    # your server's namespace, but do not anymore. This allows you to tell the
    # clients where to look for the relocated document.
    # Format: Redirect old-URI new-URL
    # Directives controlling the display of server-generated directory listings.
    <IfModule mod_autoindex.c>
    # FancyIndexing is whether you want fancy directory indexing or standard
    IndexOptions FancyIndexing
    # AddIcon* directives tell the server which icon to show for different
    # files or filename extensions. These are only displayed for
    # FancyIndexed directories.
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*
    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core
    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^
    # DefaultIcon is which icon to show for files which do not have an icon
    # explicitly set.
    DefaultIcon /icons/unknown.gif
    # AddDescription allows you to place a short description after a file in
    # server-generated indexes. These are only displayed for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz
    # ReadmeName is the name of the README file the server will look for by
    # default, and append to directory listings.
    # HeaderName is the name of a file which should be prepended to
    # directory indexes.
    # If MultiViews are amongst the Options in effect, the server will
    # first look for name.html and include it if found. If name.html
    # doesn't exist, the server will then look for name.txt and include
    # it as plaintext if found.
    ReadmeName README
    HeaderName HEADER
    # IndexIgnore is a set of filenames which directory indexing should ignore
    # and not include in the listing. Shell-style wildcarding is permitted.
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
    </IfModule>
    # End of indexing directives.
    # Document types.
    <IfModule mod_mime.c>
    # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support this.
    # Despite the name similarity, the following Add* directives have nothing
    # to do with the FancyIndexing customization directives above.
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz
    # AddLanguage allows you to specify the language of a document. You can
    # then use content negotiation to give a browser a file in a language
    # it can understand.
    # Note 1: The suffix does not have to be the same as the language
    # keyword --- those with documents in Polish (whose net-standard
    # language code is pl) may wish to use "AddLanguage pl .po" to
    # avoid the ambiguity with the common suffix for perl scripts.
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbriviation is not
    # identical to the two character 'Country' code for its country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    # Note 3: In the case of 'ltz' we violate the RFC by using a three char
    # specifier. But there is 'work in progress' to fix this and get
    # the reference data for rfc1766 cleaned up.
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    AddLanguage da .da
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .se
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage tw .tw
    AddCharset Big5 .Big5 .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866 .cp866
    AddCharset ISO-8859-5 .iso-ru
    AddCharset KOI8-R .koi8-r
    AddCharset UCS-2 .ucs2
    AddCharset UCS-4 .ucs4
    AddCharset UTF-8 .utf8
    # LanguagePriority allows you to give precedence to some languages
    # in case of a tie during content negotiation.
    # Just list the languages in decreasing order of preference. We have
    # more or less alphabetized them here. You probably want to change this.
    <IfModule mod_negotiation.c>
    LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
    </IfModule>
    # AddType allows you to tweak mime.types without actually editing it, or to
    # make certain files to be certain types.
    # For example, the PHP 3.x module (not part of the Apache distribution - see
    # http://www.php.net) will typically use:
    #AddType application/x-httpd-php3 .php3
    #AddType application/x-httpd-php3-source .phps
    # And for PHP 4.x, use:
    #AddType application/x-httpd-php .php
    #AddType application/x-httpd-php-source .phps
    AddType application/x-tar .tgz
    # AddHandler allows you to map certain file extensions to "handlers",
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action command (see below)
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    # To use CGI scripts:
    #AddHandler cgi-script .cgi
    # To use server-parsed HTML files
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml
    # Uncomment the following line to enable Apache's send-asis HTTP file
    # feature
    #AddHandler send-as-is asis
    # If you wish to use server-parsed imagemap files, use
    #AddHandler imap-file map
    # To enable type maps, you might want to use
    #AddHandler type-map var
    </IfModule>
    # End of document types.
    # Action lets you define media types that will execute a script whenever
    # a matching file is called. This eliminates the need for repeated URL
    # pathnames for oft-used CGI file processors.
    # Format: Action media/type /cgi-script/location
    # Format: Action handler-name /cgi-script/location
    # MetaDir: specifies the name of the directory in which Apache can find
    # meta information files. These files contain additional HTTP headers
    # to include when sending the document
    #MetaDir .web
    # MetaSuffix: specifies the file name suffix for the file containing the
    # meta information.
    #MetaSuffix .meta
    # Customizable error response (Apache style)
    # these come in three flavors
    # 1) plain text
    #ErrorDocument 500 "The server made a boo boo.
    # n.b. the single leading (") marks it as text, it does not get output
    # 2) local redirects
    ErrorDocument 404 /404error.htm
    ErrorDocument 500 /500error.htm
    # to redirect to local URL /missing.html
    #ErrorDocument 404 /cgi-bin/missing_handler.pl
    # N.B.: You can redirect to a script or a document using server-side-includes.
    # 3) external redirects
    #ErrorDocument 402 http://some.other_server.com/subscription_info.html
    # N.B.: Many of the environment variables associated with the original
    # request will not be available to such a script.
    # Customize behaviour based on the browser
    <IfModule mod_setenvif.c>
    # The following directives modify normal HTTP response behavior.
    # The first directive disables keepalive for Netscape 2.x and browsers that
    # spoof it. There are known problems with these browser implementations.
    # The second directive is for Microsoft Internet Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does not properly
    # support keepalive when it is used on 301 or 302 (redirect) responses.
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
    # The following directive disables HTTP/1.1 responses to browsers which
    # are in violation of the HTTP/1.0 spec by not being able to grok a
    # basic 1.1 response.
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0
    </IfModule>
    # End of browser customization directives
    # Allow server status reports, with the URL of http://servername/server-status
    # Change the ".your_domain.com" to match your domain to enable.
    <Location /server-status>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from localhost web1-v3
    </Location>
    # Allow remote server configuration reports, with the URL of
    # http://servername/server-info (requires that mod_info.c be loaded).
    # Change the ".your_domain.com" to match your domain to enable.
    #<Location /server-info>
    # SetHandler server-info
    # Order deny,allow
    # Deny from all
    # Allow from localhost web1-v3
    #</Location>
    # There have been reports of people trying to abuse an old bug from pre-1.1
    # days. This bug involved a CGI script distributed as a part of Apache.
    # By uncommenting these lines you can redirect these attacks to a logging
    # script on phf.apache.org. Or, you can record them yourself, using the script
    # support/phf_abuse_log.cgi.
    #<Location /cgi-bin/phf*>
    # Deny from all
    # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
    #</Location>
    # Proxy Server directives. Uncomment the following lines to
    # enable the proxy server:
    #<IfModule mod_proxy.c>
    # ProxyRequests On
    # <Directory proxy:*>
    # Order deny,allow
    # Deny from all
    # Allow from .your_domain.com
    # </Directory>
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    # ProxyVia On
    # To enable the cache as well, edit and uncomment the following lines:
    # (no cacheing without CacheRoot)
    # CacheRoot "/oraapp/9iAS10220/home/Apache/Apache/proxy"
    # CacheSize 5
    # CacheGcInterval 4
    # CacheMaxExpire 24
    # CacheLastModifiedFactor 0.1
    # CacheDefaultExpire 1
    # NoCache a_domain.com another_domain.edu joes.garage_sale.com
    #</IfModule>
    # End of proxy directives.
    ### Section 3: Virtual Hosts
    # VirtualHost: If you want to maintain multiple domains/hostnames on your
    # machine you can setup VirtualHost containers for them. Most configurations
    # use only name-based virtual hosts so the server doesn't need to worry about
    # IP addresses. This is indicated by the asterisks in the directives below.
    # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
    # for further details before you try to setup virtual hosts.
    # You may use the command line option '-S' to verify your virtual host
    # configuration.
    # If you want to use name-based virtual hosts you need to define at
    # least one IP address (and port number) for them.
    # Use name-based virtual hosting.
    #NameVirtualHost 12.34.56.78:80
    #NameVirtualHost 12.34.56.78
    #NameVirtualHost *
    # VirtualHost example:
    # Almost any Apache directive may go into a VirtualHost container.
    # The first VirtualHost section is used for requests without a known
    # server name.
    #<VirtualHost *>
    # ServerAdmin [email protected]_domain.com
    # DocumentRoot /www/docs/host.some_domain.com
    # ServerName host.some_domain.com
    # ErrorLog logs/host.some_domain.com-error_log
    # CustomLog logs/host.some_domain.com-access_log common
    #</VirtualHost>
    #<VirtualHost default:*>
    #</VirtualHost>
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # Some MIME-types for downloading Certificates and CRLs
    <IfDefine SSL>
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    </IfDefine>
    <IfModule mod_ssl.c>
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is a internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First either `none'
    # or `dbm:/path/to/file' for the mechanism to use and
    # second the expiring timeout (in seconds).
    #SSLSessionCache none
    #SSLSessionCache shm:/devl/ics3/devl/apache/logs/ssl_scache(512000)
    SSLSessionCache dbm:/devl/ics3/devl/apache/logs/ssl_scache
    SSLSessionCacheTimeout 300
    # Semaphore:
    # Configure the path to the mutual explusion semaphore the
    # SSL engine uses internally for inter-process synchronization.
    SSLMutex file:/devl/ics3/devl/apache/logs/ssl_mutex
    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the
    # SSL library. The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn't
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    #SSLRandomSeed startup file:/dev/random 512
    #SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    #SSLRandomSeed connect file:/dev/urandom 512
    # Logging:
    # The home of the dedicated SSL protocol logfile. Errors are
    # additionally duplicated in the general error log file. Put
    # this somewhere where it cannot be used for symlink attacks on
    # a real server (i.e. somewhere where only root can write).
    # Log levels are (ascending order: higher ones include lower ones):
    # none, error, warn, info, trace, debug.
    SSLLog /devl/ics3/devl/apache/logs/ssl_engine_log
    SSLLogLevel warn
    </IfModule>
    <IfDefine SSL>
    ## SSL Virtual Host Context
    <VirtualHost default:443>
    # General setup for the virtual host
    DocumentRoot "/devl/ics3/devl/webroot/apache"
    ServerName 172.18.4.13
    ServerAdmin [email protected]
    ErrorLog /devl/ics3/devl/apache/logs/error_log
    TransferLog /devl/ics3/devl/apache/logs/access_log
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    #SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. A test
    # certificate can be generated with `make certificate' under
    # built time. Keep in mind that if you've both a RSA and a DSA
    # certificate you can configure both in parallel (to also allow
    # the use of DSA ciphers, etc.)
    SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server.crt
    #SSLCertificateFile /devl/ics3/devl/apache/ssl.crt/server-dsa.crt
    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you've both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server.key
    #SSLCertificateKeyFile /devl/ics3/devl/apache/ssl.key/server-dsa.key
    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convinience.
    #SSLCertificateChainFile /devl/ics3/devl/apache/ssl.crt/ca.crt
    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /devl/ics3/devl/apache/ssl.crt
    #SSLCACertificateFile /devl/ics3/devl/apache/ssl.crt/ca-bundle.crt
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /devl/ics3/devl/apache/ssl.crl
    #SSLCARevocationFile /devl/ics3/devl/apache/ssl.crl/ca-bundle.crl
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
    <Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
    </Files>
    #<Directory "/oraapp/9iAS10220/home/Apache/Apache/cgi-bin">
    <Directory "/devl/ics3/devl/webroot/apache/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn't wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is send or allowed to received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog /devl/ics3/devl/apache/logs/ssl_request_log \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    </IfDefine>
    <IfModule mod_dms.c>
    <Location /dms0>
    SetHandler dms-handler
    </Location>
    </IfModule>
    # Perl Directives
    #PerlWarn On
    #PerlFreshRestart On
    #PerlSetEnv PERL5OPT Tw
    #PerlSetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
    SetEnv PERL5LIB "/oraapp/9iAS10220/home/Apache/perl/lib/5.00503:/oraapp/9iAS10220/home/Apache/perl/lib/site_perl/5.005"
    PerlModule Apache
    #PerlModule Apache::Status
    PerlModule Apache::Registry
    #PerlModule Apache::CGI
    #PerlModule Apache::DBI
    #PerlRequire
    <Location /perl>
    SetHandler perl-script
    PerlHandler Apache::Registry
    AddHandler perl-script .pl
    Options +ExecCGI
    PerlSendHeader On
    </Location>
    #<Location /perl-status>
    # SetHandler perl-script
    # PerlHandler Apache::Status
    # order deny,allow
    # deny from all
    # allow from .your_domain.com
    #</Location>
    # Setup of oprocmgr module.
    # This directive identifies each remote apache instance that will be
    # sending requests to processes (e.g., JServs), managed by local Apache
    # instances. This directive is used by the local process manager to share
    # routing information with remote apache instances via non-SSL HTTP messages.
    # The directive is repeated for each remote apache instance that will be
    # sending requests. The ProcNode directive that refers to the local apache
    # instance will be ignored, but may be supplied to facilitate uniformity
    # in configuration across apache instances. Arguments to the ProcNode must
    # be sufficient to reach the remote instance of apache via non-SSL HTTP
    # messages. It is not considered an error if the remote apache instance is
    # unreachable, as no assumption is made about the starting order or
    # availability of apache instances.
    # Syntax: ProcNode <hostname> <port>
    # Example: ProcNode abc.com 7777
    <IfModule mod_oprocmgr.c>
    ProcNode web1-v3 7777
    <IfDefine SSL>
    ProcNode web1-v3 80
    </IfDefine>
    <Location /oprocmgr-service>
    SetHandler oprocmgr-service
    </Location>
    <Location /oprocmgr-status>
    SetHandler oprocmgr-status
    </Location>
    </IfModule>
    # Setup of FastCGI module
    <IfModule mod_fastcgi.c>
    Alias /fastcgi/ "/devl/ics3/devl/webroot/apache/fastcgi/"
    ScriptAlias /fcgi-bin/ "/devl/ics3/devl/webroot/apache/fcgi-bin/"
    <Directory "/devl/ics3/devl/webroot/apache/fcgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    SetHandler fastcgi-script
         <IfDefine SSL>
    SSLOptions +StdEnvVars
         </IfDefine>
    </Directory>
    </IfModule>
    <IfModule mod_proxy.c>
    proxyRequests off
    proxyPass /cust http://172.18.4.13:7778/cust
    proxyPassReverse /cust http://172.18.4.13:7778/cust
    proxyPass /ct http://172.18.4.13:7778/ct
    proxyPassReverse /ct http://172.18.4.13:7778/ct
    </IfModule>
    #<IfModule mod_proxy.c>
    # proxyRequests on
    # proxyPass /ct http://172.18.4.13:7778/ct
    # proxyPassReverse /ct http://172.18.4.13:7778/ct
    #</IfModule>
    # Include the configuration files needed for jserv
    include "/oraapp/9iAS10220/home/Apache/Jserv/etc/jserv.conf"
    ApJServMount / /ct
    AddType text/jsp .jsp
    AddHandler jserv-servlet .jsp
    # Include the Oracle configuration file for custom settings
    #include "/devl/ics3/devl/apache/oracle_apache.conf"
    <VirtualHost 172.18.4.13:80>
    ServerName ics3dv1ws1.hq.bradgroup
    DocumentRoot /devl/ics3/devl/webroot/apache
    ServerAlias www.ics3dv1ws1.hq.bradgroup
    </VirtualHost>
    # <VirtualHost     172.18.4.13:80>
    ServerName %1.collectiblestoday.com
    VirtualDocumentRoot /devl/ics3/devl/webroot/oc4j/ct/web
    # </VirtualHost>

    Weird ... that works.
    So, I created the dummy account which was also failing as follows:
    create user newuser identified by oracle;
    grant developer_role to newuser;This fails, but only from a Form running under OC4J, until I run:
    ALTER SYSTEM SET sec_case_sensitive_logon = FALSE scope = MEMORY;While I've made this change in our development database, I don't really want to do the same eventually in PROD. I'd rather figure out what's changed about how OC4J connects, find a rememdy there, and set this back to TRUE.
    Since I didn't create the username or password as a string literal (to ensure lowercasing), I'm confused as to what's happening. When the init parm is set to TRUE, when the dialog box pops up for the form after the invalid username/password error, I tried entering the password in all lowercase, and then in all uppercase, to no effect. Both fail.
    --=Chuck

  • Svn with Apache Timeout issue

    Hello Archers,
    I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
    https://wiki.archlinux.org/index.php/LAMP
    https://wiki.archlinux.org/index.php/Subversion_Setup
    Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
    This is a client error message:
    Commit failed (details follow):
    Unexpected end of svndiff Input
    And this the corresponding server side log:
    [date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
    [date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
    [date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
    I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
    I think I don't have specified the timeouts correctly, since I haven't found the default option.
    tl:dr
    Do you know how to set the timeouts in the apache configuration file?
    I very much appreciate your help.
    arch on pi
    Here are my configuration Files with my position for the timeout order:
    httpd-ssl.conf:
    # This is the Apache server configuration file providing SSL support.
    # It contains the configuration directives to instruct the server how to
    # serve pages over an https connection. For detailed information about these
    # directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Required modules: mod_log_config, mod_setenvif, mod_ssl,
    # socache_shmcb_module (for default value of SSLSessionCache)
    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the SSL library.
    # The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn't
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    #SSLRandomSeed startup file:/dev/random 512
    SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    SSLRandomSeed connect file:/dev/urandom 512
    # When we also provide SSL we have to listen to the
    # standard HTTP port (see above) and to the HTTPS port
    Listen 443
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
    # Speed-optimized SSL Cipher configuration:
    # If speed is your main concern (on busy HTTPS servers e.g.),
    # you might want to force clients to specific, performance
    # optimized ciphers. In this case, prepend those ciphers
    # to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
    # Caveat: by giving precedence to RC4-SHA and AES128-SHA
    # (as in the example below), most connections will no longer
    # have perfect forward secrecy - if the server's key is
    # compromised, captures of past or future traffic must be
    # considered compromised, too.
    #SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
    #SSLHonorCipherOrder on
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is an internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First the mechanism
    # to use and second the expiring timeout (in seconds).
    #SSLSessionCache "dbm:/run/httpd/ssl_scache"
    SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
    SSLSessionCacheTimeout 6000
    ## SSL Virtual Host Context
    <VirtualHost _default_:443>
    # General setup for the virtual host
    DocumentRoot "/mnt/sda1/svn"
    ServerName 192.168.178.48:443
    ServerAdmin [email protected]
    ErrorLog "/var/log/httpd/error_log"
    TransferLog "/var/log/httpd/access_log"
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. Keep
    # in mind that if you have both an RSA and a DSA certificate you
    # can configure both in parallel (to also allow the use of DSA
    # ciphers, etc.)
    # Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
    # require an ECC certificate which can also be configured in
    # parallel.
    SSLCertificateFile "/etc/httpd/conf/server.crt"
    #SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
    #SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you've both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    # ECC keys, when in use, can also be configured in parallel
    SSLCertificateKeyFile "/etc/httpd/conf/server.key"
    #SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
    #SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convenience.
    #SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
    #SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded).
    # The CRL checking mode needs to be configured explicitly
    # through SSLCARevocationCheck (defaults to "none" otherwise).
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
    #SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
    #SSLCARevocationCheck chain
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10
    # TLS-SRP mutual authentication:
    # Enable TLS-SRP and set the path to the OpenSSL SRP verifier
    # file (containing login information for SRP user accounts).
    # Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
    # detailed instructions on creating this file. Example:
    # "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
    #SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
    <FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
    </FilesMatch>
    <Directory "/srv/http/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn't wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is sent or allowed to be received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    # Similarly, one has to force some clients to use HTTP/1.0 to workaround
    # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    # "force-response-1.0" for this.
    BrowserMatch "MSIE [2-5]" \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog "/var/log/httpd/ssl_request_log" \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    #SSLSessionTimeout 5m
    Timeout 600000
    <Location />
    DAV svn
    SVNParentPath /mnt/sda1/svn/repos
    AuthzSVNAccessFile /home/svn/.svn-policy-file
    AuthName "SVN Repositories"
    AuthType Basic
    AuthUserFile /home/svn/.svn-auth-file
    # Satisfy Any
    Require valid-user
    </Location>
    </VirtualHost>
    httpd.conf
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd"
    Timeout 60000
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #nach fehlermeldung
    LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #Felhermeldung undefined symbols
    LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #nach Fehlermeldung
    LoadModule cache_socache_module modules/mod_cache_socache.so
    #nochne Fehlermeldung
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    #Fuer die cipher suite
    LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #1 for svn
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #2 for svn
    LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #3 for svn
    LoadModule dav_svn_module modules/mod_dav_svn.so
    LoadModule authz_svn_module modules/mod_authz_svn.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/mnt/sda1"
    #<Directory "/mnt/sda1/svn/repos">
    # # Possible values for the Options directive are "None", "All",
    # # or any combination of:
    # # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # # Note that "MultiViews" must be named *explicitly* --- "Options All"#
    # # doesn't give it to you.
    # # The Options directive is both complicated and important. Please see
    # # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # # for more information.#
    # Options Indexes FollowSymLinks
    # # AllowOverride controls what directives may be placed in .htaccess files.
    # # It can be "All", "None", or any combination of the keywords:
    # # AllowOverride FileInfo AuthConfig Limit
    # AllowOverride None
    # # Controls who can get stuff from this server.
    # Require all granted
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    Include /etc/httpd/conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    Edit: inserted tl;dr
    Last edited by arch_on_pi (2014-05-18 21:33:24)

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Lenovo G560 overheating. Need tips on fan speed control

    When I am watching movies on my G560 laptop, the area to the left of my touchpad is getting very hot and the laptop is shutting down at times.
    When I bought my laptop I used to hear fan noise, but I have noticed recently that I do not hear the fan any more. I was wondering of there was a way to check the fan speed and manually alter it.
    The warranty on my G560 is running out with in a month or so, a quick response would be appreciated.

    the cpu greece tests over the years are the most bunch of snake oil i ever seen.
    one review site did a test with 50 and used choclate and fingernail polish to show most are complete waste of money.
    compaq builds junk.
    lenovo dose not.
    the real reason is the notebook makers dont even built the latops.
    there like 3 companys that make 90% of the worlds notebooks and pc.
    you never even heard of them either.
    they make the sonys,acers and so on in a plant on a line with dozens of brands.
    just like the way foxconn makes the apples these are huge companys that make the products per instruction of the notebook brand.
    notebooks are not like desktops one bit because they are in a tiny space where heat puts a curse in the board.
    when you release this you release that spot.
    the part of contact for a cpu die is really tiny so it dont have to make the same contact point as cpu cooler.
    cpu coolers of notebook are well designed unlike the desktop cooler they make very good contact.
    discrete graphics is another story most of all on compaqs with they used a very bad design and had majior issues with.
    trust me there no such issues with lenovos because they use a good company to make there notebooks and they also use a good design.
    the fan noise issue well that was more of a watch out for sandy bridge issue as sandy bridge can be a very hot chip.
    undervolting the chip makes a huge difference in heat as it comes with no performance loss.
    it also dont change the way the cpu sits.
    when the cpu was mated to the motherboard it perfict that day.
    when you pull the cpu now it never fit the same exact way as it has been stressed over time by the tourqe and the heat.
    pulling it will effect the fit.
    most people dont have the skill to change the greece on a cpu because they will use to much and unlike a desktop cpu that has no open transistors on the surface the mobile cpu dose.
    they will add too much and it will run and short out them.
    look at a pic of a mobile cpu and then a desktop cpu.
    a very different design.
    what you telling people is a skill they dont have because they have no idea that a simple mistake will cost them hundreads of dollers.
    notebook cpu run 200-300 dollers and some 500 bucks.
    pulling the cpu heatsink will effect it natural fit because it under tenion.
    i know this because i know metals well and i have 20 years of experence in this area.
    i alos worked for a company long ago that made robots for the waffer cpu come from.
    i think some people think they might know a quik fix because they built a pc before but notebooks are very different.
    i do custom notebook setups for people up here in boston who are willing to spend more on my labour then most notebooks cost.
    when i set up a pc it takes me 4-6 hours normally thats a standard win 7 time with all security and services adjusted complete.
    people pay for my services because they get longer run times and they stomp anything even notebook makers that charge thousands for custom setups.
    if i thought putting snake oil on a cpu would lower temps i would do it just for the lower fan noise and power use it would save.
    i know the moment i release the heatsink i never recreate the same exact fit it had under the stress that time made and the point of contact metal to metal will allways be better then if you add silicon to it.
    most people dont get that more then a pin head will be more then enough because more then that will cause a heat barrier and lower that.
    there whole point to thermal paste is to fill graps in the metal that are from the lapping process.
    it not to help cool it like some think.
    no thermal paste will ever work better then a pure magnetic grip of metal to metal.
    infact if you machine two blocks perfict they stick to each other as if they were magnets.
    tourqe them and add heat and they never do that again.
    that why latops heatsinks i feel are much more different them desktops one and what most people dont grasp.
    dont belive me call your high school science teacher and he explaine why to you.

  • Internal hard drive not recognised, but has a lot of data i need on it!HELP

    hi all
    i'm on mac pro, quad core, leopard 10.5.2.
    basically for some reason my hard drive was working fine, then one day last week i turned my mac back on and the hard drive will not initialize anymore.
    i've gone into disk utility to try and repair disk. but it's listed there, not the name i gave it but 'disk1s1'.
    i then go to verify disk and it comes up with this error.
    *Verifying volume “disk1s1”*
    * /dev/disk1s1*
    *Invalid BS_jmpBoot in boot block: fa31c0*
    *Error: Filesystem verify or repair failed.*
    so i started looking for data recovery software, i found one called data rescue and its found alot of data on it, some i dont need (like stuff i deleted a long time ago), but i have 3 logic project folders full of projects i need to get finished for releasing!
    but the thing with data rescue is... it is renaming all the fle aiff001, aiff002 etc etc, and for logic files this is no good as you need the files named as they were other wise it won't recognise the files and all the individual parts won't load up!
    so i need a way of either making the mac recognize my hard drive again so i can drag everything off it and reformat it, or use a data recovery software that does not rename the files?
    can anybody please HELP!
    cheers
    BOOM!
    Message was edited by: boomboom1980

    orangekay wrote:
    SMART is largely snake oil in implementation and practice and it's entirely commonplace for a dead drive to report itself functional and vice versa. I've seen Seagates whose heads were audibly grinding against the platters claim they were functioning normally, and I've seen others that said they were failing go on to provide years of reliable service. SMART status is a ballpark guess at best.
    yes I understand that but I wouldn't trust a drive with a non-verified SMART status. as you say, it might continue to function but chances are pretty high that it will soon fail altogether. that's already happened to the OP who should consider himself lucky he can get anything off the drive at all with Data rescue. professional data recovery is of course also an option but a very expensive one. at least when I tried to use a service like this once about 5 years ago they wanted to charge me a small fortune. not sure what that would cost these days...

  • Office 2013 BUG report: undesirable components (and various hijacks) are installed against user's will and cannot be removed

    Installing Office 2013 Pro Plus RTM x64 on a fresh Windows 8 Pro WMC system.
    Used Custom setup procedure to install only the desired software, i.e. unchecking most of the checkboxes.
    After setup, a lot of undesirable software got nevertheless installed although it was specifically UNCHECKED at setup time, e.g. "Office Themes", "Microsoft SharePoint Foundation support", "Compare Diagnostics blahblah" + a bunch of outdated truetype
    fonts.
    No matter how many times we run again the "Change" setup from Windows' "Programs and Features" and uncheck these components, the setup routine does NOT uninstall them, with or without reboot etc. Basically, the Add/Remove function of the setup has NO EFFECT.
    The setup also installs (offering no choice or notice to the users) a lot of undesirable bloatware e.g. some "Office Upload Center", "Spreadsheet Compare" etc. and several tasks (Office 2013 Sync-something stuff) & services & explorer hijacks (a greyed-out
    "Skydrive Pro", what the...) AGAINST the user's will or consent.
    These unwanted apps and hijacks seemingly cannot be uninstalled, not even kept from running and reenabling itself - except if killing the tasks using the Task Manager, then deleting (!) the files from their respective folders, in addition to editing the
    registry to get rid of all this stuff. Of course the crap gets reinstalled/reenabled with any further launch of the office setup...
    Reminds me a lot of bad practices by malicious software. :|
    Office techs and engineers, PLEASE don't promise a customized setup option if it's for it to be snake oil... And don't offer a post-setup "Add/remove" or "Change" routine that has absolutely no effect whatsoever... And don't install unneeded/undesirable
    useless features as tasks and hijacks that cannot be killed or get rid of...
    Or at least please mention explicitely that you know better than users themselves, what they want and need and decide... :)
    As a sidenote, the same issues were present with Office 2010 Pro Plus SP1 - Sharepoint stuff and office themes and all that jazz was already installed even when deliberately left unchecked, and could never be uninstalled afterwards.

    Hi,
    First, I want to confirm with you that whether you install Office via MSI or Click to Run.
    Only volume-licensed versions of Click-to-Run installations can be customized using the Click-to-Run Admin Tool. Retail versions of Click-to-Run, however, do not support the use of the Admin
    Tool or provide any user interface based customizations to the product. These versions, for example, do not allow the user to choose what applications or features to not install or even the location of the installation files. 
    If you used MSI installation, then check to see the steps in the link below:
    http://office.microsoft.com/en-us/excel-help/install-or-remove-individual-office-programs-and-components-HA010354261.aspx
    Note: We can’t remove Office programs individually after the suite has been installed. You must uninstall Office completely, and then reinstall it using a custom installation.
    Also, here’s a link about Office Customization Tool changes in Office 2010, the
    Office Customization Tool is part of the Setup program and is the primary tool that administrators use to customize an Office 2010 client installation:
    http://blogs.technet.com/b/office_resource_kit/archive/2010/01/05/office-customization-tool-changes-in-office-2010.aspx
    Jaynet Zhang
    TechNet Community Support
    A new Office has arrived, try it now.
    A beautiful Start. It begins here. Windows 8 and Windows RT.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Verizon Customer Service?  Now that's a question - with no good answers.

    Verizon has gone to great lengths to create in me something much more that a dissatisfied contract customer.  All the aggravation was exacerbated March 09 when my annual "UPGRADE" time came 'round.  Circumstances cause that I keep expenses to a minimum and my cell is the only phone I have.  A disabled Vietnam Vet 65 years into this first quarter of my life - I've pretty much been there, done that and got all the T-Shirts.
    Explaining to the CS rep in March that a bigger screen would be a great help I came to, or by, the Samsung Brightside. I am a real old timer but I eat drink and sleep computer stuff (PC) and many things electronic.  I have a fully operational audio production studio in my home and write, produce, do voice-overs for and publish not-for-profit videos - most supporting our brave men and women in harm's way.  I have, of necessity due to a battle royal for over a year with a certain major concern that seems to think they own parts or portions of my operating system, Windows 7 Professional 64 bit and bare-knuckle fighting inside my OS has caused collateral damage.  I have completely wiped and performed a clean re install of my OS twice in less than a year.
    So, when I get a "NEW PHONE" from Verizon I'm all excited about getting it up and running and performing at least to the degree it is advertised as being capable of.  The SAMSUNG BRIGHTSIDE, I have deduced after many hours struggling with it is simply a joke.  The BRIGHTSIDE absolutely had to have been some marketing scheme that was designed, constructed and put on the market by SAMSUNG without one minute of research and development.  It was as though they tried to define "BASIC" in a cell phone with this product and wrapped it in a very attractive package - until one tries to simply pick it up.  Go to the Samsung/Verizon site that lists the phones specs to try to keep pace with requisite formats for music, sounds, ring tones, videos, photos and data and if you do not speak CODEC and FORMAT good luck even trying to load onto say a 16 gig external MicroSanDisk your own music, sounds, ring tones, videos and oh! yes pictures.  Verizon has a "proprietary software cement program called "V-CAST".  Written, instilled as part of the permanent footprint of the Verizon product and it simply does not like some "owner/customer" trying to circumvent it's sole purpose which is to funnel the owner customer into a controlled position whereby if "it ain't from Verizon - it is licensed to fight you to the death.  Right now I could give lessons on exactly how and what to do to just be able to locate the files from your own library and view them on the phone.  In fact I will give lessons if I'm asked but first I'll try to convince whomever to switch to SPRINT - thanx to Consumer Reports, and my now cemented dislike for recorded CS events with Verizon.  When I wrote in a previous entry here - "It's on now!", I was not kidding.
    Taking a close look at the "My Account" page with Verizon I come across an offer they make to buy your no longer needed phone(s) that are free of obligation.  I needed to find something to hopefully make me feel a little better for the wear.  Thinking about it angers me even more so it is simply this:  My Blackberry Storm 3590, Verizon's appraised value, $7.00 - that's SEVEN dollars US.  My LG Cosmos, $0.00, as in ZERO Verizon appraised value.  So, that discovered surely Verizon must hold the new SAMSUNG BRIGHTSIDE (although "just a basic phone" as the manager of the Draper, Utah Verizon store rather bluntly said to me), here it is:  $12.00 - All in one pile no less...
    I feel so used...

    What bothers me is VZ  and some may disagree with me should respect our vets who fought for the right of people to form and own companies and what little freedoms and privacy we are privileged with. I approach a door and  It offers military discounts I am more likely to do business there again. Verizon has lost it they show no respect anymore for their customers regardless of their circumstance the more I read in this posts I am glad that I don't work for them I would have to hang my head in shame after all these posts. It seems like they are snake oil salesmen who need to be tarred and feathered and run out of town
    << Remaining content of post removed to comply with Verizon Wireless Terms of Service  >>
    Message was edited by: Verizon Moderator

  • OTC ssl.conf file does not have ssl wallet file location details

    Hi B2B Gurus,
    While doing the HTTPS configuration in OTC we observed that some of lines were missing in ssl.conf file located at <Oracle_Home>\Apache\Apache\conf. The below mentioned lines are missing in OTC’s ssl.conf but present in OracleB2B’s ssl.conf
    Even ssl wallet file location is also missing in OTC ssl.conf file as mentioned below.
    Can u please let us know as why these lines are missing or should we manually add these lines when we do HTTPS on OTC ?
    Listen 4444
    <VirtualHost default:4444>
    # General setup for the virtual host
    DocumentRoot "E:\Oracle_b2b\cachehome\Apache\Apache\htdocs"
    ServerName DSCP17506.TechMahindra.com
    ServerAdmin [email protected]
    ErrorLog "|E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/error_log 43200"
    TransferLog "|E:\Oracle_b2b\cachehome\Apache\Apache\bin\rotatelogs logs/access_log 43200"
    Port 443
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    SSLCipherSuite ALL:!ADH:!EXPORT56:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP
    # Server Wallet:
    # The server wallet contains the server's certificate, private key
    # and trusted certificates. Set SSLWallet at the wallet directory
    # using the syntax: file:<path-to-wallet-directory>
    SSLWallet file:E:\Oracle_b2b\cachehome\Apache\Apache\conf\ssl.wlt\default
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded)
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath conf\ssl.crl
    #SSLCARevocationFile conf\ssl.crl\ca-bundle.crl
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional and require
    #SSLVerifyClient require
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o CompatEnvVars:
    # This exports obsolete environment variables for backward compatibility
    # to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
    # to provide compatibility to existing CGI scripts.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions FakeBasicAuth ExportCertData CompatEnvVars StrictRequire
    <Files ~ "\.(cgi|shtml)$">
    SSLOptions +StdEnvVars
    </Files>
    <Directory "E:\Oracle_b2b\cachehome\Apache\Apache\cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog E:\Oracle_b2b\cachehome\Apache\Apache\logs\ssl_request_log "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    Thanks for your help in Advance.
    Regards,
    Priyanka

    Hi Ramesh,
    We added the missing entries in ssl.conf file and tested it out. It is working fine. When we did slient install we are facing this error, we found that this is a bug in 10.1.2.3 AS patch (5983622) silent install. Raised an SR on this and Support is working to get this fixed.
    Regards,
    Priyanka

  • Configuring httpd-ssl.conf on Leopard and Apache 2.2.6

    Hi everybody,
    I recently migrated to Leopard from Tiger 10.4.10. On my Tiger client I had installed my own web server using mod_ssl with Apache 1.3 server. On Leopard, apache 2.2.6 and OpenSSL 0.9.7 are now installed and configurations files have changed.
    Since two weeks, I'm trying to install mod_ssl without success on my machine. Thereafter, I will show only what's relevant from two configuration files :
    First -> Httpd.conf (which is in /etc/apache2/)
    #My port 80 is blocked by my isp
    Listen 8080
    <IfDefine SSL>
    LoadModule ssl_module libexec/apache2/mod_ssl.so
    </IfDefine SSL>
    LoadModule php5_module /usr/local/php5/libphp5.so
    User www
    Group www
    </IfModule>
    <IfModule mod_ssl.c>
    Listen 8080
    Listen 8083
    </IfModule>
    DocumentRoot "/Library/WebServer/Documents"
    <IfModule dir_module>
    DirectoryIndex index.htm lndex.php index.htm default.html
    </IfModule>
    ErrorLog /private/var/log/apache2/error_log
    # Virtual hosts
    #Include /private/etc/apache2/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    Include /private/etc/apache2/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include /private/etc/apache2/extra/httpd-dav.conf
    # Various default settings
    #Include /private/etc/apache2/extra/httpd-default.conf
    # Secure (SSL/TLS) connections
    #Include /private/etc/apache2/extra/httpd-ssl.conf
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    AddType application/x-httpd-php .php
    AddType application/x-httpd-php-source .phps
    DirectoryIndex index.html index.php
    </IfModule>
    #Include /private/etc/apache2/other/*.conf
    # end of httpd.conf
    Second ->httpd-ssl.conf (which is in /etc/apache2/extra/)( I elided personnal information)
    <IfModule mod_ssl.c>
    listen 8080
    listen 8083
    </IfModule>
    AddType application/x-x509-ca-cert .crt
    AddType application/x-pkcs7-crl .crl
    SSLPassPhraseDialog builtin
    #SSLSessionCache "dbm:/private/var/run/ssl_scache"
    SSLSessionCache "shmcb:/private/var/run/ssl_scache(512000)"
    SSLSessionCacheTimeout 300
    SSLMutex "file:/private/var/run/ssl_mutex"
    <VirtualHost default:8080>
    #Just to keep things sane...
    DocumentRoot "/Library/WebServer/Documents"
    ServerName myadress.com
    ServerAdmin [email protected]
    SSLEngine off
    </VirtualHost>
    <VirtualHost default:8083>
    # General setup for the virtual host
    DocumentRoot "/Library/WebServer/Documents"
    ServerName myadress.com
    ServerAdmin [email protected]
    ErrorLog "/private/var/log/apache2/error_log"
    TransferLog "/private/var/log/apache2/access_log"
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # SSL Cipher Suite:
    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:eNULL
    # Server Certificate:
    SSLCertificateFile "/private/etc/apache2/ssl.key/server.crt"
    #SSLCertificateFile "/private/etc/apache2/server-dsa.crt"
    # Server Private Key:
    SSLCertificateFile "/private/etc/apache2/ssl.key/server.key"
    #SSLCertificateKeyFile "/private/etc/apache2/server-dsa.key"
    # Server Certificate Chain:
    #SSLCertificateChainFile "/private/etc/apache2/server-ca.crt"
    # Certificate Authority (CA):
    #SSLCACertificatePath "/private/etc/apache2/ssl.crt"
    SSLCACertificatePath "/private/etc/apache2/ssl.key/"
    #SSLCACertificateFile "/private/etc/apache2/ssl.crt/ca-bundle.crt"
    # Certificate Revocation Lists (CRL):
    #SSLCARevocationPath "/private/etc/apache2/ssl.crl"
    #SSLCARevocationFile "/private/etc/apache2/ssl.crl/ca-bundle.crl"
    # Client Authentication (Type):
    #SSLVerifyClient require
    #SSLVerifyDepth 10
    # Access Control:
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    # and %{SSLCLIENT_S_DNO} eq "Snake Oil, Ltd." \
    # and %{SSLCLIENT_S_DNOU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
    <FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
    </FilesMatch>
    <Directory "/Library/WebServer/CGI-Executables">
    SSLOptions +StdEnvVars
    </Directory>
    # SSL Protocol Adjustments:
    BrowserMatch ".MSIE." \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0
    # Per-Server Logging:
    CustomLog "/private/var/log/apache2/sslrequestlog" \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    </VirtualHost>
    ### end of httpd-ssl.conf
    When I uncomment this line in httpd.conf :
    LoadModule ssl_module libexec/apache2/mod_ssl.so
    and try to send the 'apachectl start' command in terminal nothing happens. Apache seems to hang and
    no "Apache/2.2.6 (Unix) DAV/2 PHP/5.2.5 configured -- resuming normal operations" in my console log. Of course, nothing in my error_log.
    I've read somewhere else that there would be a bug in 9.7 version of modssl and that we should install 9.8 version. Could anybody confirm this ?
    Is there somebody here who succeeded installing ssl on apache 2.2.6 and Leopard 10.5.1 ?
    Thanks for helping me
    Regards

    You need the latest plugin.
    Get it from at least 6.1 SP4.
    Eric
    "Michael Congdon" <[email protected]> wrote in message
    news:[email protected]..
    >
    I am having the exact same problem with Apache 2.0.40 on Solaris 2.7 andWebLogic
    6.1 SP 1.
    Please let me know if you get any help. I don't know of anyone who hassuccessfully
    used Apache 2.0 w/WebLogic.
    "Yanjing Liu" <[email protected]> wrote:
    I tried to use apache plug-in to forward request to a wls6.1sp1 on
    Win2000.
    >>
    So I installed Apache 2.0.40 running on Solaris 8 and simply copymod_wl.so
    from
    WL_HOME\lib\Solaris to APATHE_HOME/libexec. A few lines has been added
    to my httpd.conf,
    which are:
    LoadModule weblogic_module libexec/mod_wl.so
    <IfModule mod_weblogic.c>
    WebLogicHost myweblogicserver.com WebLogicPort 7001
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    </Location>
    When I verify the syntax of the httpd.conf file with the followingcommand:
    >>
    /export/home/apache2/bin/apachectl configtest
    Here are the errors I got:
    Cannot load /export/home/apache2/libexec/mod_wl_20.so into server:ld.so.1
    >>
    /export/home/apache2/bin/httpd:fatal: relocation error:file
    /export/home/apache2/libexec/mod_wl_20.so: symbol apr_pool_create:referenced
    symbol not found.
    Has anyone expereinced a similiar problem?
    Thanks,
    Yanjing

  • ITunes Match Step 3 Stuck on Last Song

    i just signed up for iTunes Match and already experienced a bug ...
    Going trough installation I am stuck in Step 2 on the last song...
    I read on other forums that people restarted computers, stopped-restarted the installation yet after having tried even this I found no success...
    I saw other people suggesting you might wanna convert your files into other format as maybe itunes does not reckognize certain format but that was a pretty long post and Im wondering if Itunes has figured out a ... more smooth way ! !
    im not a tech expert and neither have time to bang my head to much around this issue...
    I was hoping to have a easy installation but Itunes Match seems to actually have this problem reocurring in many users... (on step 3 too)...
    Any good alternative solution ???

    Hey everyone...I've been futzing with iTunes Match since the beta was released (I'm a developer) and every time I started iTunes Match it would lockup all my applications usually at Step 1 but sometimes at Step 2 (I could move between them but everyone was beachballing). I've tried for months to get iTunes Match working without result. I would close every app to give it maximum CPU and memory, repair permisions and every other Snake Oil remedy I could think of, without luck. Then today I had a breakthrough. Here's what I did and hopefully it helps someone else:
    1. Enable iTunes Match, let it run and lockup/stall/freeze at least once. Restart iTunes and go to iTunes Match in the left bar and click the "stop" button.
    2. Go back to your music library, right click on the column names at the top and add "iCloud Download" and "iCloud Status". You should see all your tracks as "Waiting...".
    3. Select a group of tracks (I do about 500 at a time), right click and chose "Add to iCloud"
    4. iTunes will whirl for a bit and with a bit of luck you'll see it actually processing and uploading/matching music.
    5. Repeat this for the rest of your library (increasing the number of tracks you selected if you're brave) and in no time you should be up and running on iCloud.
    It's a bummer that the technology isn't better but at least I found a way to get it going.

Maybe you are looking for

  • Anyone use funambol? Want to write a PKGBUILD for it

    Hi all, Anyone here uses funambol? Its open-source but distributed in binary. I was thinking it'd be good to have an Arch (AUR) package for it. Of course, having the PKGBUILD simply unpack the binary distribution isn't optimal, was thinking of an /et

  • I have a document that came from online using Firefox 8.0 that I am unable to remove.

    I was online (Firefox 8.0) (Southwest Airlines web flight booking site) and copied a flight itinerary and pasted it to a MS Office 2007 Word document. I named it and saved it to my desktop. I now want to delete it. I have tried the delete function, d

  • Trouble with setting correct ACL for publication - EDIT_QUERY error

    *moved from BusinessObjects Integration Kits - SAP Hi All, I get an error:  EDIT_QUERY RWI00850 Scheduling document 'xxx' (Id:xxxxxxx) failed for the following users: The issue is related to this post http://www.google.dk/url?sa=t&source=web&cd=4&sqi

  • Problems with duplicate fonts

    The other day I was looking into "Font Book.app" and notice I had a few duplicates so I removed them. Now I have a few applications that don't work, like Zino (Magazine reader) it unexpectedly quits. So I contact Zino and they ask me to send them the

  • Lost library and only a portion was salvaged - how I get the rest?

    I was running Google Earth and iTunes at the same time today and our computer crashed. As a result, we lost our library (we do have it backed onto our iPhone except the album I purchased just before it crashed). I followed the instructions under appl