Header and Footer Questions

Hello.
Can anyone explain what exactly the purpose of the header and footer sections are in iWeb?
I would understand if content placed in the header or footer showed up on all pages of a site. That would be very useful, but it doesn't seem to be the case.
Also, if I start a new page using the Black template then set the header to 0px, and then copy and paste in an item that was in the header of a different page, it will create a header on the new page and place the item in it. You can see the header in layout view, but the layout tab in the Inspector still says 0px.
I have an image and home-made nav at the top of my site, but I'm not sure if I should put this in a header for some reason, or just get rid of the header and put the image and nav at the top of the body. Same goes for the footer.
Any explanation or suggestions would be greatly appreciated.
Thanks,
Andy

The footer is where the iWeb "buttons" go.
I never use then of course and I set the footer height to 50 px to act as bottom padding so that my © notice sites up a bit from the bottom of the page.
I usually drop a text box onto the page with the © notice and drag it down to quickly lengthen the page.
Its useful to use the header section if you are having a uniform header throughout your site.
I think the page I did here might help. This site is still under construction and is aimed at musicians but this particular section is kind of general...
http://www.iwebformusicians.com/WebMusic/Layout.html

Similar Messages

Header and footer question

If I wan to place something in header and footer, that would be shown on every page, can I use Page0 for that?
If not what is the quickest way to accomplish that on www site with 30 allready made pages?
THX!

Hello,
The functionality you want is already built into the application and the positioning is controlled by the page templates
For the logo you are going to have to edit the page templates to put the logo where you want it. The reason you want to do this in the page template is there is a substitution string #LOGO# that can be changed in the Application attributes.
As for messaging if you want to show the same messaging across the whole application take a look at Global Notification attribute at
Home>Application Builder>Application #####>Application Attributes>Edit Application Attributes
Any message there will be show in the messaging area across the application again the position of that is controlled with the page templates by the #GLOBAL_NOTIFICATION# substitution so if you want to move it you are going to have to edit your page templates.
Carl

Customizing header and footer in the printed documentation

Hi,
I'm using a trial version of RoboHelp 2007 and Word 2003.
I have two question about customizing the header and footer
of the printed documentation.
In the printed documentation the footer repeat at the bottom
of each page and contain page numbers, which appear left-justified
on even-numbered pages and right-justified on odd-numbered pages.
How can I customize the footer, that pages numbers appear
always right-justified?
In the printed documentation the header repeat at the top of
each page and are blank on the first page of sections. The name of
the manual appears on even-numbered pages, left-justified. The name
of the root chapter appears on odd-numbered pages, right-justified.
How can I customize the header, that
on every page the name of the root chapter and the name oft
the manual appears? Furhermore I want to include a picture in the
header. How can I realise this?

You can't from RH. See the article on my site.
Images in the header are tricky. If you use the setting that
I think enables that, you will also get the images in the TOC. Try
putting a two cell table and putting the heading in one and the
image in another.

Header and Footer in flash

Ok. This was supposed to be a question about a header and footer in Flash. I intended to attach my fla to make it possible to understand what I was saying. As it turns out I can't figure out how to attach files. Is it even possible? That's my first question.
Here's the actual question, although it will be very vague now: I have a basic header and footer in Flash that stretch to fill the screen horizontally. It works when I test the file inside Flash (Control>Test movie). But it does not work when I go "Publish Preview" and use the browser. Why is that and how can I sort it out? Any ideas?

I'm convinced there are better ways to do navigation, but this close to the end I was hoping to just grind my way forward. Somehow I managed to get the second scene working (centered that is). But when I resize the window in debug mode an error is pointed out in the first scene. "Error #1009: Cannot access a property or method of a null object reference". The snippet goes like this:
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeStage);
var header:MovieClip;
resizeStage(null);
function resizeStage(e:Event):void
var sw:Number = stage.stageWidth;
header.width = sw;
And it's the last line here that's supposed to cause the error. Do you see anything apparently wrong? I tried "var header:MovieClip; = new MovieClip();" but that didn't work at all.

How to add header and footer image in pdf

Hi,
I want to add image in header and footer for the pdf generation.
how I can add this? Following my xsl
?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:fn="http://www.w3.org/2005/xpath-functions">
<xsl:output method="xml" indent="yes" encoding="utf-8" omit-xml-declaration = "yes" />
<xsl:template match="/">
<fo:root>
<fo:layout-master-set>
<fo:simple-page-master master-name="my-page">
<fo:region-body margin="1in"/>
</fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
<fo:flow flow-name="xsl-region-body">
<fo:block >
<xsl:apply-templates mode="dump" select="/session/entity/instance/attribute"/>
</fo:block>
</fo:flow>
</fo:page-sequence>
</fo:root>
</xsl:template>
<xsl:template match="*" mode="dump" priority="100">
<fo:block >
               <fo:block margin-left="1cm">
                    <xsl:for-each select="@question-text">
                    <xsl:value-of select="."/>=
                    </xsl:for-each>
                    <xsl:if test="string-length(normalize-space(text())) > 0">
                    <xsl:value-of select="text()"/>
                    </xsl:if>
               </fo:block>
<xsl:apply-templates mode="dump" select="*"/>
</fo:block>
</xsl:template>
</xsl:stylesheet>
Edited by: 848231 on Apr 6, 2011 1:42 AM

Hi,
Here is one way of putting an image in the header:
<fo:layout-master-set>
    <fo:simple-page-master master-name="my-page">
      <fo:region-body margin="1in"/>
      <fo:region-before extent="1in" background-color="silver" />
    </fo:simple-page-master>
</fo:layout-master-set>
<fo:page-sequence master-reference="my-page">
     <fo:static-content flow-name="xsl-region-before">
         <fo:block height="150px" width="1024px" background-color="white" >
             <fo:external-graphic src="http://localhost:9000/web-determinations9000/images/Header.jpg">
             </fo:external-graphic>
        </fo:block>
    </fo:static-content>
    <fo:flow flow-name="xsl-region-body">
    </fo:flow>
</fo:page-sequence>One good XSL:FO refernce: http://www.learn-xsl-fo-tutorial.com
Hope this helps.
Thanks,
Aakarsh
Edited by: aakarsh on Apr 6, 2011 6:40 AM

Header and footer area in alv

Hi All,
What is the use of Header and Footer Area (Top of List & End of List ) in ALV table. Can any one explain me..
Thanks,
Susil

hi ,
In the below link there is an example for creating top of list end end of list.. in this the header and footer are displayed outside the ALV table.. My question is what is the use of the header and footer even I can use UI's to display the header and footer...
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0ee06d0-d475-2b10-ddad-bc4bf134cfb8?overridelayout=true
Thanks,
Susil.

Header and Footer

I do not understand the use of Header and Footer area, other than as a page margin. I can't put anything in them. Am I missing some additional function these area can provide?
Thanks in advance. Tom

hey tmskw!
so your question got me thinking... i know what the header is for (so i replied with the answer to you), but hey! i never use it at all!
so here you go:
http://web.mac.com/huy_huy
i updated my site with headers... and all inspired by you! if you really want to make your iweb site look professional i'd suggest you make a standard header that is the same for all your pages.
a footer can be used the same way and can lead to a very nice looking site also. if you do go for a footer graphic though i'd suggest you make your content area a fixed height (maybe about 500?) so that the footer graphic will be visible without scrolling.

Header and Footer for PDF with images using itext.jar

HeaderFooter class was available in itext.jar ,I tried using this class with PDFtemplate and Phrase i am trying to put the image on the header and footer ,however the image comes perfectly for the first page ,its not applicable for the second or continuous page, is it possible to have the images in header and footer?
Regards,
Venkateswaran

Questions about third-party APIs should be asked in the forum/newsgroup specific to that API. These forums are for questions relating to the API as provided by Sun.
Go find an iText forum.

Error occured while genrating header and footer for the PDF

Hi All ,
I am getting a following error whenever i try to excecute the code to print header and footer while genrating a PDF what could be the reason.Any help would be greately appreciated. following is the error stack trace: i am excecuting it in the command prompt an using jdk1.5.0.1
C:\Program Files\Sun\Creator2_1\java\Test>java EndPage
Exception in thread "main" java.lang.UnsupportedClassVersionError: EndPage (Unsu
pported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
3)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:250)
at java.net.URLClassLoader.access$100(URLClassLoader.java:54)
at java.net.URLClassLoader$1.run(URLClassLoader.java:193)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:265)
at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)

Looks like the EndPage class was compiled with a later version of Java (49.0 == Java 1.5) and you are trying to run it with older version of java.exe. Type
java -version
to verify.
Also this forum is for Sun Java Studio Creator related questions. Please ask such questions on java tools forum.
Sandip

How to disable auto header and footer from firefox desktop Application

I build a Firefox desktop application for my company. i need to print some page from that application using JS window.print(). It Works Perfectly in my application. But the problem is when it printing my document it prints a header and a footer automatically. I Want to remove this. I can remove this on Firefox browser , but i cant remove this on my application. Please Somebody Help Me.
here is my application link: https://marketplace.firefox.com/app/hmspro
User Login : admin / Password: 123
if you want to get into printing page navigate invoice > paid invoice > print button.
I also tryed from about:config and disable all default header footer. but it wont worked.

Hi saaiful,
Thank you for posting your question. window. will print header and footer.
Here are some solutions I found after researching your issue:
*[http://forums.mozillazine.org/viewtopic.php?f=12&t=216810]
*[http://stackoverflow.com/questions/8228088/remove-header-and-footer-from-window-print]
*[http://www.dreamincode.net/forums/topic/22598-using-windowprint-without-printing-header-and-footer/]
*take a screenshot and create a page that is printable [http://www.webdeveloper.com/forum/showthread.php?210947-Using-window-print-without-printing-header-and-footer]
*Target to another window then print: [http://www.liferay.com/community/forums/-/message_boards/view_message/3401817]
Hope this helps.

Resetting Header and Footer in RTF templates

Hi,
I developed an RTF template (template 1). This template contains start:body and end body for printing the header and footer in all pages. After printing this template then i have to call another template(template 2) from this. I called the template (template 2) using call statement. But the probelm is that the header and footer of template1 is printed in the output of template2 .
I dont want to print this header and footer for template 2. Can anyone please suggest me in doing this. I placed start:body and end body in the second template with the assumption that 1st template's header and footer will be overwritten. But if i preview then am getting the error
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Documents and Settings\kpoda\Desktop\Invoice Printing Efficiencies\Sample XML Data\Sample Output4.xml
FOProcessor setLocale: en-us
each
Please sugget.
Thanks

Hi,
Do you have two templates (template1 & template2) that you want to display in the same document where the pages for template1 has one set of header and footers; and template2 has another set of header and footer?
If that is the case you can simply create a new section in your rtf template so you have section1 and section2.
In the body of section1 you call template1 and template2 in the body of section2.
You can then have different header and footers for the two templates in the same document.
BR Kenneth

Remove filename header and footer

Hello! When you open a HTML file in Acrobat it puts the path to the filename in the header and footer automatically. How can I remove this?
I went to Header/Footer and tried to update or remove, but it says there is no option. How do I do this?
In another issue, Is there any plugin that will let me "press enter" to move the body of text downwards in the PDF, similar to Microsoft Word? I imported a bunch of company listings from a HTML document and I am trying to space them out 3 to a page and I need to shift the body of text down to the next page break. Is this possible with Acrobat or an affordable program/plugin?
Kind Regards,
Kevin

Have you tried using the Touch Up Text tool for both of your issues? Touch Up Text will not work in an automated way, but you can use it to manually edit existing text on the page. Not sure about any plugins that remove headers/footers, although there might be a way in Acrobat's help files that outline how to prevent it from automatically embedding on converted HTML pages from web browsers.

I am missing header and footer in numbers

after I updated to Numbers 3.01 I miss the footer and header in my docs
and can't find any posiibility how to do that.
In the older versions there were always header and footer.
Can anyone please help?
Thanks
p

let's hope and wait ;-)
Meanwhile there are some workarounds that can work for some headers (though, for footers, you're limited to page number). See this in Print Preview:
You can set up extra Header Rows in your table and have them repeat on each printed page. The Table Name only shows on the first printed page, so you may want to uncheck Table Name before printing:
See this thread for an example of how this workaround worked for one user.
SG

How to Add Header and Footer in Flat file

HI All,
I am using ODI 11g.
MY interface is populating data from joining to 2 tables through sql query and Loads in to Flat file.
But i need to add Header and Footer in the Flat file.
In the below 3 lines
The 1st line is header ....2nd line is Data ....3rd line is Footer.
Any ideas how to work on this.
HSB9KT.KTPRTO.EBSDATA.D0000000 20120626020636
CFFE00263 SOLGSR014991340000527894536058173880207SOLNE06242012072420120000009048382650000247MRS
T00000000000000000000
Thanks,
Lony

Hi Drieux,
i am able to add Header and Footer in this.
But i want the header like Its like HSB9KT.KTPRTO.EBSDATA.D0000000 || SYSDATE (YYYYMMDDHHMMSS)
In my Out put i only see header as HSB9KT.KTPRTO.EBSDATA.D0000000 .
I have added a Variable where i am using SELECT to_char(sysdate,'YYYYMMDDHHMMSS') FROM DUAL query.
create header (HSB9KT.KTPRTO.EBSDATA.D0000000 #v_DATE)
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=FFT_SOLSNP$CRLOAD_FILE=/home/tarak/FFT_SOL.datSNP$CRFILE_FORMAT=FSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000ASNP$CRFILE_FIRST_ROW=0SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=descrSNP$CRTYPE_NAME=STRINGSNP$CRLINE_OFFSET=1SNP$CRLENGTH=994SNP$CRPRECISION=994SNP$CR$$SNPS_END_KEY*/
Any idea why this sysdate part is not showing in Header.

How To set Header and Footer in MIDlet screen

Hi Friends,
How can i set header and footer in my screens .
My need is that in header part ,my company's name shuld be display and in footer section "any thing".
How can i achieve this things plz advice me.
karan

Hi Supareno,
Can u tell me in details with small code, If it's
possible for you .
regards
karandefine an header (coordinate 0,0)
optional {
a CustomItem? (coordinate 0, 0+header.getHeight() )
another CustomItem ? (coordinate 0, CustomItem.getY() + CustomItem.getHeight() )
etc...
define footer (coordinate 0, getHeight() - footer.getHeight() )
Message was edited by:
supareno

Header and Footer Questions

Similar Messages

Maybe you are looking for