Hello, after I used migration assistant on a mac to another mac, OS X has been misbehaving and I have not been able to install some applications such as Adobe Flash Player. Could you help me, please? Thank you.
The problem is: after I concluded the long process of migration my OS X is not working correctly. I have been worried since and have been trying to figure it out by going into forum and even apple's own support comunity!
I would really appreciate it if you could help me !
Thank you.
Pedro
Welcome to the account number problem. Each user account has a number, starting with 501, 502 etc. Whereas Setup Assistant uses the first account (say 501) which is the same as the original data disk, later use of Migration Assistant creates a new user account (say 502), so cannot then communicate with the old data.
Here is Pondini's guide to this, with a solution too:
http://pondini.org/OSX/MigrationProblems.html
Pondini RIP
Similar Messages
-
I really wish someone could help me.
Thank you.Reinstalling OS X won't help you unless you erase the drive and reinstall from scratch. To do that you want a backup of your files so they won't be lost. If you can do that, then:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Now, after the successful first startup you will be in the Setup Assistant. Be sure you give your new admin account the same username as the one on your backup. When you get to the Desktop I suggest you install Flash from the download link I gave you earlier. Open Safari and see if Flash is now working for you. I recommend you reinstall only your data at this time. Redownload and install any third-party software you use. Be sure you get only the most recent versions and that they are compatible with Mavericks - App Compatibility Table - RoaringApps. -
I have a galexy prevail 3g I need to download an adobe flash player can someone help please
I need help to find an adobe flash player for galexy prevail 3g
Hi Greg,
I don't know what's wrong with that link, on Firefox/Waterfox I get this
On Internet Explorer it shows
I will try later today on a different location/network. -
Each time I try to update applications etc. I get a message on my iphone that my Apple ID is disabled. Please help! Thank you.
Nenita1437 wrote:
...I get a message on my iphone that my Apple ID is disabled. ..
If disabled for Security Reasons... See here http://support.apple.com/kb/TS2446
If not for Security reasons...
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.
I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can). -
hello, since I actualized my Mac with Maverick it doesn't recognize any external hard disk ,... only the one to make copy on the time machine. Can anybody help me? thank you!!!!
Hello Laurabcn,
Thank you for using Apple Support Communities.
For more information, take a look at:
USB and FireWire Quick Assist
http://support.apple.com/kb/ht1151
Have a nice day,
Mario -
after i upgrade to mavericks, every time i create folder or delete files, they keep asking me ti fill the password, but only on my finder? help me please Thank You
As a first step, open Disk Utility > select your hard drive > repair disk permissions.
-
I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?
I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Cheers, Tom -
Apple care i want your help . i got a new that someone stock of iphone5s about battery problem . My ip5s is decrese batterry so fast . Can you help me please? you can check to IME ? plz
Apple representatives don't respond to anyone in this forum. It's just user-to-user. Go here to check support options (going to Apple store, calling Apple support, etc.): https://getsupport.apple.com/ProductSelector.action
-
Hi I bought an app - storytime for kids, it had just two books and i downloaded three more books but when i tried to download the fourth book the app is not responding. can you help me? thank you.
Try force quiting the app. From the users guide:
Force quit an app: Press and hold the On/Off Sleep/Wake button for a few seconds
until a red slider appears, then press and hold the Home button until the app quits.
You can also remove an app from the recents list to force it to quit. See “Opening and
Switching Apps” on page 23. -
good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
you can you help me? thank you very muchfrancesco marraffa wrote:
good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
you can you help me? thank you very much
Are you running your MacBook Pro off WiFi or Ethernet?
Pete -
Hi!
I don't remember security questions. i want to take it. I hope you help me. Thanks you.You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(87159) -
hello I'm from mexico and I have the problem that my ipod touch 5g load not ..... I've been reading and this may in total discharge because I trying it a week and I have not been able to load what do I do? please help
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar -
I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?
Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account. -
I bought my iPad mini two weeks ago and used my apple ID to make it sync with my iPhone. But so far I have not been able to activate iMessage and face time. It only gives me the option of signing in and when I do that I get an error message telling me that either my user name or password for my email is incorrect; even though I have been using my correct my apple ID in the password entry area. My apple ID works for every thing else. Please, can you help in this case?
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Also... Create your Own Apple ID for Your iPhone...
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
And... Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
See Here for > How to Use Multiple iDevices with One Computer
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
Maybe you are looking for
-
"Error when interpreting the runtime repository" for IUICOBJD component
Hello experts, I create an enhancement set for IUICOBJD component, and the systems return my the error: "Error when interpreting the runtime repository" Then in ICWEB, this enhancement affect to the view connectionObject. And this view doesn't appea
-
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are co
-
AS3: outputting trace() content to external txt file
the question's in the title. ive got a swf but i've gotta run it on a nokia n800, which means trace() content will be lost and - boy! - do i need it! so how can i set my swf up to output its trace content to an external txt file?
-
Connecting monitor to tv tuner
I have a L2045W monitor,can i connect an upscaling freeview tuner box to my monitor
-
i have an ipod touch 4. plugged into itunes..stuck in restore for 5 hours . progress bar not moving. what do i do now