Hello , FMS is how to prevent the client into a large number of bytes?

Hello , FMS how to prevent the client to pass a large number of bytes , such as one person put a 1G file in the argument , I also silly to receive ?Although there Client.setBandwidthLimit ( ) limit his maximum traffic per second , but is there a way , one more than the maximum amount of bytes to disconnect his.I assume that methods to determine the length is also obtained all of his transfer is finished , in order to determine out of it .

How to limit the size of the parameters of the method.I wrote a method in the main.asc then the client NetConnection.call assignment, but if the client is malicious to upload very large data, how to limit it, I view the document did not find the clues, I hope that those parameters up to100KB.

Similar Messages

  • How to calculate the area of a large number of polygons in a single query

    Hi forum
    Is it possible to calculate the area of a large number of polygons in a single query using a combination of SDO_AGGR_UNION and SDO_AREA? So far, I have tried doing something similar to this:
    select sdo_geom.sdo_area((
    select sdo_aggr_union (   sdoaggrtype(mg.geoloc, 0.005))
    from mapv_gravsted_00182 mg 
    where mg.dblink = 521 or mg.dblink = 94 or mg.dblink = 38 <many many more....>),
    0.0005) calc_area from dualThe table MAPV_GRAVSTED_00182 contains 2 fields - geoloc (SDO_GEOMETRY) and dblink (Id field) needed for querying specific polygons.
    As far as I can see, I need to first somehow get a single SDO_GEOMETRY object and use this as input for the SDO_AREA function. But I'm not 100% sure, that I'm doing this the right way. This query is very inefficient, and sometimes fails with strange errors like "No more data to read from socket" when executed from SQL Developer. I even tried with the latest JDBC driver from Oracle without much difference.
    Would a better approach be to write some kind of stored procedure, that adds up all the single geometries by adding each call to SDO_AREA on each single geometry object - or what is the best approach?
    Any advice would be appreciated.
    Thanks in advance,
    Jacob

    Hi
    I am now trying to update all my spatial table with SRID's. To do this, I try to drop the spatial index first to recreate it after the update. But for a lot of tables I can't drop the spatial index. Whenever I try to DROP INDEX <spatial index name>, I get this error - anyone know what this means?
    Thanks,
    Jacob
    Error starting at line 2 in command:
    drop index BSSYS.STIER_00182_SX
    Error report:
    SQL Error: ORA-29856: error occurred in the execution of ODCIINDEXDROP routine
    ORA-13249: Error in Spatial index: cannot drop sequence BSSYS.MDRS_1424B$
    ORA-13249: Stmt-Execute Failure: DROP SEQUENCE BSSYS.MDRS_1424B$
    ORA-29400: data cartridge error
    ORA-02289: sequence does not exist
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 27
    29856. 00000 - "error occurred in the execution of ODCIINDEXDROP routine"
    *Cause:    Failed to successfully execute the ODCIIndexDrop routine.
    *Action:   Check to see if the routine has been coded correctly.
    Edit - just found the answer for this in MetaLink note 241003.1. Apparently there is some internal problem when dropping spatial indexes, some objects gets dropped that shouldn't be. Solution is to manually create the sequence it complains it can't drop, then it works... Weird error.

  • Sequence file Version number. How to prevent the automatic resetting build version number whilst auto-incrementing revision number?

    Hi,
    I've got my environment set this way that each save of the sequence file increase the revision part of version number. However, during that increase the build counter is reset to 0. How to prevent it?
    TS 4.2

    Mimi,
    It is pretty common practice in software revisioning to reset a minor number to 0 when a major moves up 1.  There are many different schemes out there.  If you google or bing software versioning schemes you'll see what I'm talking about.
    So looking at it from left to right:  Major.Minor.Revision.Build = 0.0.0.1 
    if you change the Revision it would be expected that anything to the right (in this case Build) would reset to 0.  0.0.1.0!
    Let's say your version is 8.34.56.23.  It would make sense that if you were to change the Major number (which means a Major release) to 9 then your version would go to: 9.0.0.0. 
    A version number is just a unique way to tell someone which specific software you are using so it really doesn't matter that it resets to 0.  Although it makes sense because if you kept your build number sequential and didn't reset it then it would get outrageously larger which would be more annoying than anything. 
    Again this is common accepted practice in industry.
    Good Luck,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to prevent the code viewing of jsp files

    hello friends
    How to prevent the code viewing on directly opening .jsp files at the server side
    Thanks in advance

    hello friends
    How to prevent the code viewing on directly opening
    .jsp files at the server side
    Thanks in advanceWhat exactly do you mean by code viewing? If by that you mean you don't want all the folders to show in the directory create a index.jsp file that has all the links to the pages you want to show
    If you mean something else please clarify

  • How to prevent the transaction code

    Hi
    I want to remove the common transaction code like /n,/o and /nex for particular user.
    Is there any SAP standard role availble or how to prevent the authurization for the above client independed
    transaction code.
    Regards,
    Jayakumar

    Hi,
    I want to know why you need to restrict these features when there is no harm.
    These are not transactions. They are extra features in SAP.
    /nT-code --- takes you to the new T-code by ending the previous T-code.
    /oT-code -
    creates a new session with the given T-code.
    /nex -
    ends the session.
    Rgds
    Suman

  • F110 - How to prevent the creation of DME file in Proposal Step

    Hello,
    I would like to prevent the creation of DME file in Proposal Step of Payment Run (F110).
    Is it possible to suppress "Create Payment Medium" checkbox?
    Many Thanks

    If you are using the Payment Medium Workbench, there is perhaps a solution:
    I found the following code in function module FI_PAYMEDIUM_OFX_20
    * We abort the payment if the data is from a payment proposal. With
    * OFX we can pay only if the data does not come from a payment
    * proposal.
      IF I_FPAYH-XVORL = 'X'.
        MESSAGE E404 WITH I_FPAYH-LAUFD I_FPAYH-LAUFI
            RAISING CANCEL_PAYMENT_MEDIUM.
      ENDIF.
    So I think it may be possible to solve your problem by using the event modules in transaction OBPM3, with your own function module based on the code given above. I have not tested such solution and I have no experience with these events, but I'm currently trying to use them for another problem.

  • How to retrieve the client IP address when Apache acts as a proxy for Tomca

    Hello,
    I am trying to retrieve the client IP address accessing the web
    services. Because Apache is our proxy for all requests, when I try to
    retrieve the client IP I always get the localhost IP: 127.0.0.1
    The following code returns the localhost IP:
    MessageContext msgContext = MessageContext.getCurrentContext();
    if(msgContext != null) {
    return msgContext.getProperty(Constants.MC_REMOTE_ADDR).toString();
    return "Unknown";
    From a servlet, obtaining the client IP address can be achieved using
    this code.
    String ipAddress = request.getHeader("x-forwarded-for");
    if (ipAddress == null) {
    ipAddress = request.getHeader("X_FORWARDED_FOR");
    if (ipAddress == null){
    ipAddress = request.getRemoteAddr();
    return IPaddress ;
    Any help is greatly appreciated.
    Thank you very much

    @ejp....
    thanks buddy....
    u made my world a better place to live.....

  • Hello anyone know how to use the locked iphone outside USA

    hello anyone know how to use the locked AT&T iphone 5 outside US. I'll go to Japan. Don't know if the phone can be used there.any idea will be appreciated.

    You'll need to get it unlocked by ATandT to avoid paying huge roaming costs.
    See: http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820

  • Hello, small question, how to change the bank details my account is on? keep on charging the old card nr of a friend ;-(

    hello, small question, how to change the bank details my account is on? keep on charging the old card nr of a friend ;-(

    Go to iTunes, click on your Apple ID (right top iTunes' corner), enter your paswword if requested and edit the details you want

  • How to refresh the client area

    i used javax.swing.JPanel and drawed many shapes with paintComponent method. i wonder how to refresh the client area.
    ps: i first used paint method to draw shapes, but i found a copy of the menu bar appeared. at last i found paintComponent method works, but when i tried to refresh the client area with repaint, the same scene appears.
    could some one help me?
    thanks in advance!

    when i tried to refresh the client area with repaint, the same scene appears. When you invoke repaint() on a component, the paintComponent() method of that component is invoked. So unless your code in that method is different, the image painted will be the same.

  • How to prevent the user to submit leave request?

    Hi all,
    If the employee has wrong setup in the AME approval,the error "ERROR: An Invalid Setup has been detected for the current Transaction Type in Approvals" will be raised, although the employee will be able to submit the request, the request will have pending for approval status.
    How to prevent the user to submit the request when the error raised?
    Any idea.
    Regards

    Hi,
    Is this possible?  Pl check the error and your Transaction type. Refer ID 420381.1(How to Create the Approval Transaction Type for AME.A?) and also refer Oracle White paper on
    "Approvals Management Responsibilities and Setups in AME.B".
    Hope this helps.
    Regards,
    Siva

  • How to prevent the Canon 6D to climb to higher ISOs when it works in automatic mode?

    How to prevent the canon from 6D climbing to higher ISOs when it works in automatic mode?
    I was shooting at a basketball game at ground level and I left it in automatic mode because the moves were too fast, but when I passed to Lightroom, the photos were grainy, due to high ISO.

    Under the settings menu (third menu over), select ISO settings, and then set the Auto ISO limits for max to whatever you consider the maximum acceptable ISO.

  • How to prevent the program not to skip the process when exception is genera

    Hi, friends.
    How to prevent the program not to skip the process when exception is generated?
    For example, I am doing a process for 100 records. If the 15th record causes a Java Exception, I want to be able to skip it and continue processing the remaining 85 records.
    How it is possible with Java Exception handling? Any sample code?
    Thanks,
    Jaykishan

    [http://java.sun.com/docs/books/tutorial/essential/exceptions/]
    while (there are more lines) {
      try {
        process the next line
      catch (...) {
        log the error
    }[http://java.sun.com/docs/books/tutorial/essential/exceptions/]
    You'll want to be careful about which exceptions you catch though. For instance, if there's an unchecked exception, like NullPointerException, it's a sign of a bug in your code. Continuing to process as if that bug weren't there is often a worse approach than just failing. In this particular case, however, as long as you log the exception and then followup by fixing the bug that caused it, it may be acceptable to continue trying to process the rest of the file, even if some lines bring out a bug in your code.

  • Does anyone know how to prevent the YouTube volume from going up automatically?  I keep my volume down and it increases automatically when I play a video.

    Does anyone know how to prevent the YouTube volume from going up automatically?  I keep my volume down and it increases automatically when I play a video.

    Have you tried Windows Update in the Control Panel?
    Many times it will find the newest supported drivers for Hardware.
    Just be sure to install everything not just the Important ones.
    Let us know if this helps.

Maybe you are looking for