Alternative of CL_RSR_QUERY_VARIABLES in BI (urgent)

Hi can any body tell me what is the alternative class in BI70 as this class does not exist in BI system ,, but it was there in previous release, and what actually this class does.
thanks
Faisal

Hey,
This is a popular question and I have yet to see it answered. I do not think it is possible. It might be worth while creating a development request following Note 11.
Regards.
Michael

Similar Messages

Error in passing value

Hello expert,
Need your help its Urgent
Currently, in my report when user clicks on a particular column, popup will be display with more information for that particular data. This is working perfectly fine only if data or passing value doesn't contain “&” (and sign) character. If my data has got the “&” sign then popup will display with page not found error.
Any suggestion or alternative, Please reply it’s urgent,
Thanks in advance
Sagar

Hello sagardori,
The first possible situation:
The ampersand (&) is used in the URL syntax to pass variables. So if you have a text like this in an item:
Hello I am the one & this is the otherthe parameter will pass like this:
P1_ITEM:Hello I am the one & this is the other
And the & will define that there iis a new parameter.
Always use:
& instead of & when using an URL with HTML
Had to put it in code tags, because it doesn't escape on the forum as well :)
P.S.
You can of course check the parameter in the URL of your popup page
The second possible situation:
When using special chars in APEX, you should be aware that the default way to handle text fields, textareas or even display values (like in a report) have 2 modes.
1. Display as text(escape special characters)
2. Standard Report Column
There are actually some more variations but these two are the most straightforward. If you use the first, all special characters will be escaped. So if you put in:
<script type='text/javascript'>
alert('Hello, is it me you looking for');
</script>You will get exactly that code, only because it's escaped.
If you would put it in as a standard report column, it would show the alert box, because the code's not escaped, thus treated as a javascript.
So in short,
1. Check your URL (especially passing parameters)
2. Check your report settings for the right type of text handling.
Hope this helps,
Greetings,
Rutger
http://rutgerderuiter.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/
Edited by: [email protected] on Oct 13, 2008 1:37 AM

Rotation of String using JDK1.2

I need to rotate a string in an applet. I am able to do that using AffineTransform Class found in(java.awt.geom.AffineTransform) but the problem is that its not visible in Browser.
Can u give me the other alternative for this.
Its Urgent.

Use a browser that supports java correctly ;-)
Installing the Java Plugin wil fix it. Using Opera with Java might help.
But i guess you want to place the applet on a website and cannot order users to use specific sofware. Take a look at the Java API documentation to see since when the functions you use are in the API. You are using an up to date api but that doesn't go for browsers.
But i wouldn't be able to tell you what each browser supports and what not.
But I do have some vague memmories of java.awt.geom.AffineTransform wich does 2D transformations and is standard api and an AffineTransform in the Java3D api, wich is an extension and unlikly to be supported by browsers.
So find out what you are using an what browsers support...

Fcode enchancement?`

hi experts
i have a problem regarding fcode enchancement
In tcode /DBM/CASHDESK,here i have the badi "/DBM/BADI_TILL" in this badi iam able to see 4 fcode enchanments.3 r used already and only 1 left,i.e +CUST1.
if iam trying to implement this i had selected one icon with name but i couldnt able to see this in GUI status appl. toolbar.there i got empty.all remaining 3 refleted in appl. toolbar expet +CUST1.
PLEASE DO HAVE A LOOK AT AND POST THE SOLUTION AND ANY ALTERNATIVE SUGGESTIONS FOR THIS PROBLEM.URGENT.

Hi ,
From Functional Point of View Function Code ( Fcode) is nothing but a Button displayed on very screen , on holding the same will execute some codes within sap and present you the required data.
For example , EXECUTE ( F8) Button itself is a function code .
But technically speaking , all Buttons will have to be named and assigned with tasks to be performed. to hand this each button is internally repfreented by a Name for example EXECUTE button will be given a function code as EXEC , Back button as BACK etc...
I hope you got what to do with Fcode . You can read more now from ABAP Help doc.
Thanks,
Sudhi

Does anyone know an alternative to transparency blend urgent help needed!

I have been trying to fade watermark for the past 3 days using transparency>blend in QT7.Does anyone know a reliable alternative as I have an inmminent deadline looming. details below :
When I try to create watermark in visual settings i.e transparency>blend, the watermark disappears when I close properties window and all that is left is a grey box. This even happens when I try to offset the watermark.
The very anoying problem is that occasionally I manage to carry out task successfully i.e blend watermark, using exactely the same commands!!
Come on apple, sort this problem out immediately!! Ther is no point in having a quality codec system like h264 if on the other hand there is an intermittent fault in visual settings and you cant carry out such a simple task. QT 7 is not near as robust as QT 6 for this purpose.
Does anyone have a work around? It would be really appreciated.
g4 1 ghz dual Mac OS X (10.3.9)
David M Brewer
Posts: 596
From: Denver, CO
Registered: 22-Jan-2006
Re: visual settings problems
Posted: 06-Aug-2006 08:25 in response to: Michael kelly1
Reply Email
Is the water make a png with a transparency? Use "Add To Selection And Scale."
Place the watermark on a higher level.
There nothing wrong with with Qt when placing a watermark.
g-4 1.2 gig Mac OS X (10.4.7) Quicktime 7.1.1-1.5 gigs of ram, 2-21" Sony monitors
Michael kelly1
Posts: 24
Registered: 27-Oct-2004
Re: visual settings problems
Posted: 06-Aug-2006 11:17 in response to: Michael kelly1
Reply Email
Yes watermark has transparency (png and gif files only used) and I use "add to selection and scale"
The problem is when I use blend slider I can see logo fading in QT file but when I exit movie properties the logo disappears and I am left with a grey box.I have repeated exercise with the same source logo file numerous times using exact same commands with only a 5% success rate.
I have increased level of gif video track as you suggested but when it went above 0 the watermark disappeared.

I can make something similar happen. It seems that changing from None to Blend to Straight Alpha does not always make the track change appearance. Other combinations can lead to it staying in other states.
The easy solution to that is to set the track ink to None, see that it did change, then set it to what you want, and see it change again, and then the effect should take ok.
I think there may be better performance if your watermark track uses straight alpha rather than blend. You could build more transparency into the PNG if you want it to have a blend effect. Or you could use Straight Alpha Blend. That will make the seethrough parts transparent, and the non seethrough parts will be blended.
There's another possible issue you may run into, which is that you may be exporting the combined watermark/video out to a new H264 track at low data rate. Depending on the nature of the video your logo make get ruined by the low data rate. Having the watermark in its own track (don't forget to do a Save As self contained, not just a Save) will give the best looking logo, but lesser performance. Exporting to a new movie will have a less good looking logo, but better performance.
iMac G5 1.8 GHz Mac OS X (10.4.5)

Any alternative to SOAP ? Urgent

I've got a client that wants to pass request/reply messages
based on XML thru Internet --> Web Server (Apache) --> Database
(and reverse).
I'm new to all this and first thing I saw is using SOAP on web
server. Is there any other alternative to this? Or this is the
standard protocol used in this occasions?
Thanks!

We keep getting SQL Service Broker conversation getting locked and creating deadlocks, any ideas to find the root cause.
- Nav
Naveen| Press Yes if the post is useful.
1. This is not a reason not to use Service Broker, but a reason to find the source of the problem. The Service broker by it's own usually do not cause Deadlocks, using one
queue.
There are a lot of potential solutions to prevent deadlocks occurring, and the correct one will depend on the specific deadlock condition that is occurring.
If you are using several queues, try to Send, to the same service.
For most cases, there is no reason for having two target services. Make sure that
the using of the message in the queue, is not the reason for the deadlocks, the insert should be OK for most cases. Monitor the reasons what is in conflict. If you can give us more information
it might help us to specifically give you advice.
* Handling Deadlocks in SQL Server
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
* Capturing Deadlocks in SQL Server:
http://www.brentozar.com/archive/2014/06/capturing-deadlock-information/
http://technet.microsoft.com/en-us/library/ms178104(v=sql.105).aspx
* Minimizing Deadlocks:
http://technet.microsoft.com/en-us/library/ms191242(v=sql.105).aspx
2. Did you read my response below?!?
I hope that I am not wasting my time to write...
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Document splitting generate lines with alternative +/- signs (very urgent)

Hi experts,
I am facing the above problem when i am clearing the vendor Document clear F-44, After simulate the Entry will be coming, when save the entry we are faced this problem Massage Class GLT0002.
Regards
gvr

Hi Guest,
Thank you for your replay, please explain, where can open a customer message (FI-GL-FL).
give me some detail reg this one.
Regards
gvr

Alternatives to content area pages? URGENT!!

Hi...
I am implementing a site in Portal with a static navbar on the
left side with links to folders... this navbar will remain
static, the content that changes is in the rigth side..
If I make a new page from scratch, including the navbar and the
content area as portlets, when I click on a link on the left,
the page banner and the other portlets disappear, and appears
the content area page..... I read that the only way you can keep
that page appearance is to customize the content area page
itself.
Are there any other ways to do this? (not depending of the
content area page??)
Please, I need help ASAP!!

Not in the current release. The next release of Portal, planned
for early 2002, will make this a lot easier.
Regards,
Jerry

In urgent need of Warehouse Builder 10.1.0.1 (alternatively 10.1.0.2)

Can anyone please point me to a downloadlocation where I can find Warehouse Builder 10.1.0.1 (or 10.1.0.2) for Windows ?
On the Oracle download-page, only version 10.1.0.4 is available.
regards
Henrik Poulsen

Yes I am looking for release 1.
The link provided is for 10.1.0.4 - I am looking for 10.1.0.1 or 10.1.0.2
regards
Henrik Poulsen

Urgent HELP required on forming the Matrix of data using PL/SQL

Hi All,
I'm new to this thread and require your urgent help in this regard.
I've got a requirement for building a 5000 X 5000 matrix using PL/SQL. My original data tables have 5000 rows each and I need to do a correlation analysis using this data and need to store in a physical table and not in-memory. Is this feat achievable using mere PL/SQL? I understand that Oracle DB has a limitation of 1000 columns(but not sure) and hence I'd like to know whether there is any work-around for such scenarios. If not, what are the other alternative method(s) to achieve this feat? Do I need to use any 3rd party tools to get this done? An early reply from the experts is highly appreciated.
Thanking you all Gurus in advance.
Rgds
Sai

Welcome to OTN!
I'll get to your quesiton in a moment, but first some welcome information. Many OTN posters consider it impolite to mark threads as "urgent". We are volunteers and have jobs of our own to do without people we don't know making demands. You are brand new and deserve some patience but please understand this. It is very likely before I finish this post someone will complain about the word "urgent" in your subject.
On to more interesting things :)
You can do the matrix, but are out of luck with a 5000 x 5000 table because Oracle only allows 1000 columns per table. There are ways to work around this.
How do do the matrix depends on what you want to do. You can do this different ways. You can create a table beforehand and use PL/SQL or simple SQL to populate it, or use the CREATE TABLE AS syntax to create and populate it in one step if you can get the underlying SQL to work the way you want, something like
create table my_table as
select a.*, b.*
from table1 a, table2 bcan populate a matrix from 2 tables with an intentional cartesian join (the WHERE clause was left out intentionally, provided your data is already in the data base.
If not you can use a PL/SQL routine to populate the data.
There are a couple of ways to solve the 1000 column limit. The easiest way might be to have 5 collections of 1000 columns each. A more complicated but more elegant soltion would be to have nested collections, allowing 2 colliections that you can loop through - a collection of collections. Nested collections can be hard to work with. A third way would be to use nested tables in the database but I personally do not like them and the insert, update, and delete statements for nested tables are hard to use.
I'm not going to give a code example because I am not sure which solution is best for you. If you have further questions post them.

REJECT statment to break GET event is Obsolete in ECC 6.0 - Alternative?

Hi Developers,
REJECT statment is used to break from GET event (say GET PERNR event in Logical Database) used to process for an Employee.
This REJECT statement is Obsolete . Is there any alternative for this ?
If so, please reply at the earliest as it is very Urgent.
Regards,

Hi Suma,
The REJECT statement was specially developed for leaving GET event blocks. Unlike CHECK and EXIT, REJECT always refers to the current GET event block. If CHECK and EXIT occur in a loop, they refer to the loop, and in a subroutine, they always refer to the subroutine. The REJECT statement, on the other hand, allows you to exit a GET event block directly from a loop or a called subroutine.
The statement
REJECT [dbtab].
always terminates the processing of the current line of the node of the logical database. Without the optional dbtabspecification, the logical database automatically reads the next line of the same node, and the next GET event at the same hierarchy level is triggered. If you use the optional dbtab specification, the logical database reads the next line of the node dbtab. The node dbtab must occur above the current node in the logical database hierarchy.
Example
The following executable program is connected to the logical database F1S.
REPORT EVENT_DEMO.
NODES: SPFLI, SFLIGHT, SBOOK.
GET SFLIGHT.
SKIP.
WRITE: / 'Carrid:', SFLIGHT-CARRID,
'Connid:', SFLIGHT-CONNID,
'Fldate:', SFLIGHT-FLDATE.
ULINE.
GET SBOOK.
PERFORM SUB.
FORM SUB.
WRITE: / 'Bookid:', SBOOK-BOOKID.
REJECT 'SFLIGHT'.
ENDFORM.
This program reads and displays only the first booking for each flight, since the logical database reads the next line of SFLIGHT after the REJECT statement.

REJECT is obsolete in ECC 6.0 - Any Alternative?

Hi Developers,
REJECT statment is used to break from GET event (say GET PERNR event in Logical Database) used to process for an Employee.
This REJECT statement is Obsolete . Is there any alternative for this ?
If so, please reply at the earliest as it is very Urgent.
Regards,

Use check statement.
Demo is as follows -
constants: c_1(1) type c value '1' .
Start-of-selection.
get pernr.
Read Infotype 0
rp-provide-from-last p0000 space pn-begda pn-endda.
check pnp-sw-found eq c_1. "it will check if record is there,if not it will go to next pernr

I don't have the password of my alternative email, how can i change the security question's answers?

I need to know URGENTLY because, i bought an itunes card, now that money is in my account, but i logged in with my Apple ID in my mac and it says hat i have to answer the security questions (which, i don't remember) because it's a new device etc. Please, i need to know how to change the security questions because i dont have the passsword of my alternative email!

If you don't have access to your rescue email account (an alternate email address is a different address/setting on your account) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

Error while creating BOM using BAPI (urgent)

Hi all,
Thanks for ur help. i am getting some error while creting a BOM using that BAPI
BAPI_MATERIAL_BOM_GROUP_CREATE.
errors are
1) Error/warning when checking the structure of the BOM group with ID =
2)Alternative does not exist for material assignment to material BAPIBOMFG1
is it mandatory to pass the bom group id to this bapi?
In bomgroup structure , i am not passing anything to BOM_GROUP field.
is it mandatory to pass this data? i am giving my coding below.plz suggest , where i am making mistake. it is urgent.
regards
pabitra
report z_bom_create
line-size 132
line-count 65
no standard page heading.
*-- DATA DECLARATION--
include <icon> .
*---Tables
tables : s076, t100, marc .
*---Types
types : begin of t_upload, " Upload file data
col1(18),
col2(10),
col3(30),
col4(12),
col5(50),
end of t_upload,
begin of t_split,
location like stpu-ebort,
end of t_split.
data:begin of i_return occurs 10.
include structure bapiret2.
data:end of i_return.
types:begin of t_item."occurs 10.
include structure BAPI1080_ITM_C.
types:end of t_item.
types:begin of t_subitem." occurs 10.
include structure BAPI1080_SUI_C.
types:end of t_subitem.
types:begin of t_header." occurs 10.
include structure BAPI1080_MBM_C.
types:end of t_header.
types:begin of t_bomgroup." occurs 10.
include structure BAPI1080_BGR_C.
types:end of t_bomgroup.
types:begin of t_variant." occurs 10.
include structure BAPI1080_BOM_C.
types:end of t_variant.
*--- Tables
data: i_upload type standard table of t_upload, " to hold data
i_upload1 type standard table of t_upload,
i_split type standard table of t_split,
i_item type standard table of t_item,
i_subitem type standard table of t_subitem,
i_header type standard table of t_header,
i_bomgroup type standard table of t_bomgroup,
i_variant type standard table of t_variant.
data: wa_upload type t_upload, " to hold file data,
wa_upload1 type t_upload, " to hold plan data,
wa_split type t_split,
wa_item type t_item,
wa_subitem type t_subitem,
wa_header type t_header,
wa_bomgroup type t_bomgroup,
wa_variant type t_variant.
data:v_matnr like mara-matnr,
v_start like sy-index,
v_count(3) type c.
*--Constants
data: c_dot type c value '.',
c_x type c value 'X',
c_comma type c value ','.
-------Selection Screen Design -
*Selection screen for input of upload file address
selection-screen skip 2.
selection-screen begin of block blk1 with frame.
parameters : p_file like rlgrap-filename obligatory .
parameters : p_matnr like mara-matnr obligatory,
p_werks like marc-werks obligatory memory id wrk,
p_stlan like afko-stlan obligatory default '1' .
selection-screen end of block blk1.
---AT SELECTION SCREEN -
at selection-screen on value-request for p_file.
*--For popup to select file.
perform f_give_help.
at selection-screen on p_matnr.
perform f_check_matnr.
-----START OF SELECTION -
*--Data upload using WS_Upload.
perform f_get_data.
perform f_get_bom_data.
perform f_get_bom_data1.
perform f_call_bapi.
*& Form f_give_help
text
--> p1 text
<-- p2 text
FORM f_give_help.
call function 'WS_FILENAME_GET'
exporting
mask = ',.,..'
mode = 'O'
importing
filename = p_file
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0 and not sy-msgty is initial.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_give_help
*& Form f_check_matnr
text
--> p1 text
<-- p2 text
FORM f_check_matnr.
CALL FUNCTION 'BAPI_MAT_BOM_EXISTENCE_CHECK'
EXPORTING
MATERIAL = p_matnr
PLANT = p_werks
BOMUSAGE = '1'
VALID_FROM_DATE =
VALID_TO_DATE =
TABLES
RETURN = i_return.
ENDFORM. " f_check_matnr
*& Form f_get_data
text
--> p1 text
<-- p2 text
FORM f_get_data.
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
tables
data_tab = i_upload
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM. " f_get_data
*& Form f_get_bom_data
text
--> p1 text
<-- p2 text
FORM f_get_bom_data.
delete i_upload where col1 is initial.
delete i_upload where col1 cs 'ITEM'.
read table i_upload into wa_upload with key col1 = 'FINISHED GOOD:'.
if sy-subrc = 0.
v_matnr = wa_upload-col2.
if v_matnr <> p_matnr.
message e001(zl) with p_matnr.
endif.
else.
message e000(zl).
endif.
ENDFORM. " f_get_bom_data
*& Form f_get_bom_data1
text
--> p1 text
<-- p2 text
FORM f_get_bom_data1.
loop at i_upload into wa_upload where col1 CS 'FINISHED GOOD'.
v_start = sy-tabix + 1.
loop at i_upload into wa_upload1 from v_start .
if wa_upload1-col1 cs 'FINISHED GOOD'.
exit.
else.
perform f_split_upload_data.
endif.
endloop.
endloop.
ENDFORM. " f_get_bom_data1
*& Form f_split_upload_data
text
--> p1 text
<-- p2 text
FORM f_split_upload_data.
if not wa_upload1-col5 is initial.
if wa_upload1-col5 cs c_comma.
split wa_upload1-col5 at c_comma into table i_split.
loop at i_split into wa_split.
v_count = v_count + 1.
endloop.
if wa_upload1-col4 <> v_count.
wa_upload1-col4 = v_count.
endif.
clear wa_upload1-col5.
clear wa_split.
loop at i_split into wa_split.
wa_upload1-col5 = wa_split-location.
append wa_upload1 to i_upload1.
endloop.
else.
append wa_upload1 to i_upload1.
endif.
else.
append wa_upload1 to i_upload1.
endif.
ENDFORM. " f_split_upload_data
*& Form f_call_bapi
text
--> p1 text
<-- p2 text
FORM f_call_bapi.
clear wa_upload1.
wa_header-material = p_matnr.
wa_header-plant = p_werks.
wa_header-bom_usage = p_stlan.
append wa_header to i_header.
wa_bomgroup-bom_usage = p_stlan.
wa_bomgroup-created_in_plant = p_werks.
append wa_bomgroup to i_bomgroup.
wa_variant-alternative_bom = 1.
wa_variant-base_qty = 1.
wa_variant-valid_from_date = sy-datum.
append wa_variant to i_variant.
loop at i_upload1 into wa_upload1.
wa_item-item_no = wa_upload1-col1.
wa_item-item_cat = wa_upload1-col2.
wa_item-component = wa_upload1-col3.
wa_item-comp_qty = wa_upload1-col4.
append wa_item to i_item.
wa_subitem-subitem_qty = '1'.
wa_subitem-installation_point = wa_upload1-col5.
append wa_subitem to i_subitem.
endloop.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
TESTRUN = ' '
ALL_ERROR = ' '
TABLES
BOMGROUP = i_bomgroup
VARIANTS = i_variant
ITEMS = i_item
SUBITEMS = i_subitem
MATERIALRELATIONS = i_header
ITEMASSIGNMENTS =
SUBITEMASSIGNMENTS =
TEXTS =
RETURN = i_return.
if i_return[] is initial.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
*write: /'BOM created:', stpo-stlnr.
else.
*if not i_return[] is initial.
loop at i_return.
IF i_return-TYPE = 'E'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_RED as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
IF i_return-TYPE = 'W'.
errmsg-type = i_return-type.
errmsg-line = i_return-message.
append errmsg.
ULINE /1(108).
write:/ icon_led_YELLOW as icon, i_return-MESSAGE.
ULINE /1(108).
ENDIF.
ENDLOOP.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
*write: /'Error'.
endif.
ENDFORM. " f_call_bapi

Hi shashi,
Thanks for ur help.i tried after passing the group but it is giving same error.
i am getting the error
"Error/warning when checking the structure of the BOM group with ID= test"
i am gettig the above error when i put bomgroup-bom_group_identification = 'TEST'.
whatever i am putting in this field, the same error is comming having different value.
if i put--- bomgroup-bom_group_identification = ' '. then i will get error
"Error/warning when checking the structure of the BOM group with ID=
if i omit that field, then also , i am getting same error.
plz suggest what r the fields i need to pass for BOMGROUP structure for that bapi?
regards
pabitra

Notification to Manager on creation of an Urgent Change Control

Trying to set up a notification subscription so that when someone creates an Urgent Change Control, the Manager of that person gets notified. Looking in the subscription, under Recipients not sure what to put there. Since it could be anyone that creates
the CC, how do you direct the notification to just that persons Manager?
I am sure it has something to do with the Template that is used and the Activity tab but not sure what. Can someone get me started in the right direction or is this even possible?

Alternatively, If you need the line manager to approve, you might try adding a review activity to the process and setting the "Line Manager must approve" checkbox on that activity. if you have set up standard review activity notifications,
then the manager of whoever created the request will get a notice.
if the user only needs to be notified, then you might set the approval method on that activity to "automatic" so the notification is sent, then the RA is automatically approved and the process can continue.

Alternative of CL_RSR_QUERY_VARIABLES in BI (urgent)

Similar Messages

Maybe you are looking for