Hello, relay access denied error

Hello, can someone help me with such thing: need to configure c170 as mail gateway for postfix. the thing is, i've done all the initial setup, set RAT to accept all emails for my domain and for other domains, as i use one interface deployment solution. I've put my postfix as relay host in HAT. Also i've put my host in smtp routes as for my domain and for all other domains too, so c170 must redirect outgoing messages to my postfix, but postfix tells Relay access denied. Did i miss something? or i just don't understand something? it would be great if postfix will send outgoing messages, rather than c170. Need advise. Thanks in advance.

HERE IS WHAT MY ESA SAYS:
Received Time:           17 Dec 2013 09:28:42 (GMT +02:00)
MID:           74842, 74841
Message Size:           856 (Bytes)
Subject:           123
Envelope Sender:           [email protected]
Envelope Recipients:           [email protected]
Message ID Header:           <[email protected]>
SMTP Auth User ID:           N/A
Attachment Attachments:           N/A
Sending Host Summary
Reverse DNS Hostname:           (unverified)
IP Address:           xx.xxx.xx.146
SBRS Score:           not enabled
Processing Details
           MAIL POLICY "OutgoingMail" MATCHED THESE RECIPIENTS: [email protected]
17 Dec 2013 09:28:42 (GMT +02:00)           Protocol SMTP interface Data 2 (IP xx.xxx.xx.147) on incoming connection (ICID 363238) from sender IP xx.xxx.xx.146. Reverse DNS host None verified no.
17 Dec 2013 09:28:42 (GMT +02:00)           (ICID 363238) RELAY sender group Incoming Relay match xx.xxx.xx.146 SBRS not enabled
17 Dec 2013 09:28:42 (GMT +02:00)           Start message 74841 on incoming connection (ICID 363238).
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 enqueued on incoming connection (ICID 363238) from [email protected].
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 on incoming connection (ICID 363238) added recipient ([email protected]).
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 on incoming relay (Postfix) missing header Received.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 contains message ID header '<[email protected]>'.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 original subject on injection: 123
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 (856 bytes) from [email protected] ready.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 matched per-recipient policy OutgoingMail for outbound mail policies.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74841 queued for delivery.
17 Dec 2013 09:28:42 (GMT +02:00)           SMTP delivery connection (DCID 41909) opened from Cisco IronPort interface xx.xxx.xx.147 to IP address xx.xxx.xx.146. on port 25.
17 Dec 2013 09:28:42 (GMT +02:00)           (DCID 41909) Delivery started for message 74841 to [email protected].
17 Dec 2013 09:28:42 (GMT +02:00)           (DCID 41909) Message 74841 bounce verification rewriting sender [email protected] to [email protected].
17 Dec 2013 09:28:42 (GMT +02:00)           (DCID 41909) Message 74841 to [email protected] bounced by destination server. Reason: 5.1.0 - Unknown address error ('554', ['5.7.1 <[email protected]>: Relay access denied'])
17 Dec 2013 09:28:42 (GMT +02:00)           Start message 74842 on incoming connection (ICID 0).
17 Dec 2013 09:28:42 (GMT +02:00)           A new message 74842 was generated to handle bounce of message 74841.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74842 enqueued on incoming connection (ICID 0) from .
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74842 on incoming connection (ICID 0) added recipient ([email protected]).
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74842 (1971 bytes) from ready.
17 Dec 2013 09:28:42 (GMT +02:00)           Message 74842 queued for delivery.
17 Dec 2013 09:28:42 (GMT +02:00)           SMTP delivery connection (DCID 41910) opened from Cisco IronPort interface xx.xxx.xx.147 to IP address xx.xxx.xx.146 on port 25.
17 Dec 2013 09:28:42 (GMT +02:00)           (DCID 41910) Delivery started for message 74842 to [email protected].
17 Dec 2013 09:28:43 (GMT +02:00)           (DCID 41910) Delivery details: Message 74842 sent to [email protected]
17 Dec 2013 09:28:43 (GMT +02:00)          Message 74842 to [email protected] received remote SMTP response '2.0.0 Ok: queued as E39B43807DF'.
HERE IS WHAT MY POSTFIX SAYS:
Dec 17 09:06:51 mail postfix/smtpd[18564]: connect from smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]
Dec 17 09:06:51 mail postfix/smtpd[18564]: NOQUEUE: reject: RCPT from smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]: 554 5.7.1 <[email protected]>: Relay access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=
Dec 17 09:06:51 mail postfix/smtpd[18568]: connect from smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]
Dec 17 09:06:51 mail postfix/smtpd[18568]: 8A90D3807E5: client=smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]
Dec 17 09:06:51 mail postfix/cleanup[18569]: 8A90D3807E5: message-id=<[email protected]>
Dec 17 09:06:51 mail postfix/qmgr[2383]: 8A90D3807E5: from=<>, size=2553, nrcpt=1 (queue active)
Dec 17 09:06:51 mail postfix/local[18570]: 8A90D3807E5: to=<[email protected]>, relay=local, delay=0.08, delays=0.05/0.01/0/0.02, dsn=2.0.0, status=sent (delivered to mailbox)
Dec 17 09:06:51 mail postfix/qmgr[2383]: 8A90D3807E5: removed
Dec 17 09:06:56 mail postfix/smtpd[18564]: disconnect from smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]
Dec 17 09:06:56 mail postfix/smtpd[18568]: disconnect from smtp.xxxx.xxx.xx[xxx.xxx.xxx.147]
Dec 17 09:07:01 mail dovecot: pop3-login: Login: user=, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.146, mpid=18578, TLS
Dec 17 09:07:01 mail dovecot: pop3(test): Disconnected: Logged out top=0/0, retr=1/2651, del=0/17, size=34346
xx.xxx.xx.146 is ip of my postfix server. it is listed in relaylist. also it is listed in smtp routes for All other domains.

Similar Messages

OEM Email Notification:: "Relay access denied " Error

Hello all,
The IP address of the OEM grid server was changed very recently.
Though everythin works perfectly after that, 'am not getting any mail notifications that i used to get before.
The Outgoing Mail (SMTP) Server ip is the same as it was previously
In OEM, Setup => Notification Methods =>Test Mail Servers ::gives the below errors.
<smtp ip addr>: Test failed with message: "Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 554 <[email protected]>: Relay access denied "
Is there anywhere i need to make any change??
TIA,
J J

Well, This was coz dat the "relaying" for the new ip address was not enabled in the mail server.
J J

Weird "relay access denied" error when using "%" in email address

Hi, I've written a solution that allows emails to be processed and redirected through my mail server. First, we receive mail at user%[email protected]. Then, we do some checks to make sure its legit, alter its content and re-send it to [email protected]. I posted another topic in this forum getting some advice as to how to build it, but it's all built and working well... or so I thought...
I initially had trouble with using the % symbol as the delimiter because of a default postfix behavior (postfix by default treats the % as my custom application is, which of course can be dangerous). However, I added "allowpercenthack = no" to main.cf and that seemed to allow postfix to not attempt to process it itself and let my application do the work.
However, if I now send mail now to my server (from another server) destined to user%[email protected], I (and my log) gets:
<user%[email protected]>: Relay access denied (in reply to RCPT TO command)
However, if I send to an address WITHOUT the %, like something [email protected], the whole thing works correctly.
HOWEVER, if I send messages WITH and WITHOUT the % from the command line while ON the server, I don't get these errors.
My main.cf has the following restrictions(s):
<pre>smtpdrecipientrestrictions = rejectnon_fqdnrecipient, checkrecipientaccess hash:/etc/postfix/access,
permit_mynetworks, rejectunauthdestination, rejectnon_fqdnsender,
rejectnon_fqdnhostname, rejectinvalidhostname, checkheloaccess hash:/etc/postfix/helo_access,
rejectrblclient zen.spamhaus.org, rejectrblclient bl.spamcop.net, rejectrblclient relays.ordb.org,
permit</pre>
I'm assuming that permit_mynetworks is allowing this to work from my server's command line, and therefore I'm suspecting rejectunauthdestination is what's killing my ability to use the % symbol. As a test, I removed rejectunauthdestination temporarily and reload postix. The next mail received triggered this error in the log:
Mar 16 12:24:28 server postfix/smtpd[1368]: fatal: parameter "smtpdrecipientrestrictions": specify at least one working instance of: checkrelaydomains, rejectunauthdestination, reject, defer or deferifpermit
Of course. I needed one of those directives. I didn't want reject, defer or deferifpermit, and documentation on checkrelaydomains was not available at http://www.postfix.org/postconf.5.html. However, I tried checkrelaydomains, and it seemed to work as expected permitting my % emails and rejecting stuff it should, but of course the 'gotcha' was that postfix's log now reflected:
Mar 16 12:33:08 server postfix/smtpd[1579]: warning: support for restriction "checkrelaydomains" will be removed from Postfix; use "rejectunauthdestination" instead
Mar 16 12:33:08 server postfix/smtpd[1579]: warning: restriction `rejectnon_fqdnsender' after `checkrelaydomains' is ignored
So, can anyone recommend a way I can polish up my restrictions to allow these % addresses without opening myself up for anything dangerous?
Side question: I placed `rejectnon_fqdnsender' after rejectunauthdestination destination because I didn't want to bother checking the sender unless I confirmed the recipient was at my server. Does that comment that it doesn't work after checkrelaydomains, mean that it also doesn't get processed after rejectunauthdestination?
MacBook Mac OS X (10.4.8)

However, I added "allowpercenthack = no" to main.cf
and that seemed to allow postfix to not attempt to
process it itself and let my application do the
work.
However, if I now send mail now to my server (from
another server) destined to
user%[email protected], I (and my
log) gets:
Hardly ever had a need for this, but if I remember correctly you will need to set:
allowuntrustedrouting = yes
in main.cf
(No need for allowpercenthack (I think))
or you could create a hash table before rejectunauthdestination to return OK based on your needed patterns.
I think the first method will work though.
Side question: I placed `rejectnon_fqdnsender'
after rejectunauthdestination destination because I
didn't want to bother checking the sender unless I
confirmed the recipient was at my server. Does that
comment that it doesn't work after
checkrelaydomains, mean that it also doesn't get
processed after
checkrelaydomains is deprecated
You can place rejectnon_fqdnsender anywhere you like or even omit it, but I don't see why you would have to.

Relay access denied error

Guys/gals,
I have this problem on my newly installed SLS. Here is the output of my postconf -n :
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
header_checks = pcre:/etc/postfix/customheaderchecks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailboxsizelimit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 209715200
mydestination = $myhostname, localhost.$mydomain, localhost,
mydomain = caradimas.org
mydomain_fallback = localhost
myhostname = mail.caradimas.org
mynetworks = 127.0.0.0/8
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpdclientrestrictions = permit_mynetworks permitsaslauthenticated rejectrblclient zen.spamhaus.org permit
smtpdenforcetls = no
smtpdhelorequired = yes
smtpdhelorestrictions = rejectinvalid_helohostname rejectnon_fqdn_helohostname
smtpdpw_server_securityoptions = login,gssapi,cram-md5
smtpdrecipientrestrictions = permitsaslauthenticated permit_mynetworks rejectunauthdestination checkpolicyservice unix:private/policy permit
smtpdsasl_authenable = yes
smtpdtlsCAfile = /etc/certificates/family.caradimas.org.33E94047AFE79CA6E6513B0DD8E2DE4AE822F25B .chain.pem
smtpdtls_certfile = /etc/certificates/family.caradimas.org.33E94047AFE79CA6E6513B0DD8E2DE4AE822F25B .cert.pem
smtpdtls_excludeciphers = SSLv2, aNULL, ADH, eNULL
smtpdtls_keyfile = /etc/certificates/family.caradimas.org.33E94047AFE79CA6E6513B0DD8E2DE4AE822F25B .key.pem
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = yes
tlsrandomsource = dev:/dev/urandom
unknownlocal_recipient_rejectcode = 550
virtualaliasmaps = $virtual_maps
Any help in solving this issue will be greatly appreciated.

It isn't possible to answer your question since you haven't really given enough information.
OK, sure, you've given the server config, but not explained the problem.
For example - where are you trying to send mail from? The server itself? a machine on your network?
Since my_networks is set to 127.0.0.0/8 then only the machine itself can send unauthenticated emails - all other users will need to authenticate.
So the next question is whether your mail client is authenticating against the server or not?
A copy of the logs (/var/log/mail.log and/or /var/log/system.log) showing a client trying (and failing) to send a message would help.

SMTP Relay Access Denied Problem

Hi,
While trying to Send Mail from SAP WEBAS 6.40 Short Message to External Mail domain like <uname>@yahoo.com or <uname>@gmail.com. i am getting Relay Access Deny Error.
but,
The Mails are delivering to those users in my own mail domain which is configured in the SCOT.
The SMTP,SICF & SCOT are configured as per SAP.
Our mail domain is hosted by Intermedia.net mail.
I am doubting about Mail Domain Intermedia.net route permission for Relay the mail to the mail server which is POP3 QMAIL Server.
Pls tell me the Setting required to Change in the Mail server for Relay Access Permission.
My Environment is ECC5.0 - WIN - MSSQL.
Thanks & Regards,
R.Shiva

I´m with the same problem. The theme is that is problem of the configuration of smtp.
1496168 - Error XS802 / XS829 - relay problem while sending mails through SAPconnect using SMTP plug-in

Error 550 5.7.0 Relay Access Denied in Server 2013 Enterprise

Good evening everyone.
When emails are sent from outside of our domain, to our domain; the following message is returned:
Delivery to the following recipient failed permanently:
email
Technical details of permanent failure
Google tried to deliver your message, but it was rejected by the server for the recipient domain by mail messaging microsoft
The error that the other server returned was:
550 5.7.0 Relay Access Denied
It is affecting all users.
I have scoured the net and tried many solutions. I have disabled both the anti-spam software and Symantec.
I am at a loss. I am willing to try a reconfigure that doesn't require an outside relay or try and fix this issue but the system has been down for the organization for too long.
Any advice is appreciated!
Thank you

Hi ,
1.On the exchange cas server please check the option anonymous users is checked on the receive connectors under permissions groups.
Connector name : Default front end connector
Note : Anonymous users needs to be checked on the above mentioned connector in all the cas servers to accept the anonymous connections coming from internet.
2.However please tell me ,For you exchange organisation where you have pointed your MX records ?
3.Did you done any recent change on the receive connectors ?
4.Please do the inbound email test from EXRCA tool and share me the results .
Thanks & Regards S.Nithyanandham

When sending an email to all our members under a group email I get a fatal error relay access denied. Very important I get these emails out to all our members.

Trying to email a group of all our members and I keep getting an error message.
he original message was received at Tue, 18 Nov 2014 13:50:51 -0500
from d154-20-241-245.bchsia.telus.net [154.20.241.245]
----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 554 5.7.1 <[email protected]>: Relay access denied)
----- Transcript of session follows -----
... while talking to scariboochamber.org.:
>>> RCPT To:<[email protected]>
<<< 554 5.7.1 <[email protected]>: Relay access denied
554 5.0.0 Service unavailable

However, I added "allowpercenthack = no" to main.cf
and that seemed to allow postfix to not attempt to
process it itself and let my application do the
work.
However, if I now send mail now to my server (from
another server) destined to
user%[email protected], I (and my
log) gets:
Hardly ever had a need for this, but if I remember correctly you will need to set:
allowuntrustedrouting = yes
in main.cf
(No need for allowpercenthack (I think))
or you could create a hash table before rejectunauthdestination to return OK based on your needed patterns.
I think the first method will work though.
Side question: I placed `rejectnon_fqdnsender'
after rejectunauthdestination destination because I
didn't want to bother checking the sender unless I
confirmed the recipient was at my server. Does that
comment that it doesn't work after
checkrelaydomains, mean that it also doesn't get
processed after
checkrelaydomains is deprecated
You can place rejectnon_fqdnsender anywhere you like or even omit it, but I don't see why you would have to.

Relay Access denied /fully-qualified hostname

hello guys,
I have made an application that sends emails (with attachments) to different users. It works fine when I use an email account (smtp server) from my network but not otherwise.... For example if i use it from my university then uni's smtp server must be used. But when i run it from my job, my uni's server does not work (vice versa).
I get the following exceptions:
Thu Feb 05 12:46:40 CET 2004
ERROR MESSAGE: javax.mail.SendFailedException: Sending failed;
nested exception is:
     class javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
     class javax.mail.SendFailedException: 554 <[email protected]>: Recipient address rejected: Relay access denied
     at javax.mail.Transport.send0(Transport.java:218)
     at javax.mail.Transport.send(Transport.java:80)
     at MailUtil.testOutgoingSmtp(Main.java:692)
     at EmailConfigDialog.testBtActionPerformed(Main.java:1578)....
Thu Feb 05 12:30:58 CET 2004
ERROR MESSAGE: javax.mail.SendFailedException: Sending failed;
nested exception is:
     class javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
     class javax.mail.SendFailedException: 504 <cube>: Helo command rejected: need fully-qualified hostname
     at javax.mail.Transport.send0(Transport.java:218)
     at javax.mail.Transport.send(Transport.java:80)
     at MailUtil.testOutgoingSmtp(Main.java:692)
     at EmailConfigDialog.testBtActionPerformed(Main.java:1578)
my hostname is cube. Can someone please help? It is driving me crazy :::(.
I am using windows xp
cheers
Awan

Sorry, hit the post button before addressing the other problem. While your getting the DNS problem solved find the guy that is administering the SMTP server and tell him it is not relaying messages for you. He'll probably want to know the address so bring the stack trace with you and show him the 500 series error.

Receiving Relay Access Denied message when trying to send mail

Hello,
I have a client who getting the following error when sending a message:
domainname-com.mail.protection.outlook.com[207.46.163.215] said: 550 5.7.0 Relay Access Denied (in reply to RCPT TO command)
I think this is a Microsoft/outlook.com issue.
Please advise.
Have a great day,
Don

Hi,
Please send emails to different addresses, check if the message will always return.
What is the user's account type? If it's Outlook.com via Exchange ActiveSync, then we should check the service status on
www.live.com. If the there's trouble sending from Web as well, it should be somthing related to the recipient's side, contact them via a possible portal and let them know that they seem to have rejected your emails.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can't receive mail, Relay access denied

Hello all,
I am new to Ma c OS Server, so i apologize if this topic has already been covered before. However, I have spent several hours browsing through different discussions and still couldn't figure out where my problem is.
I have set up a new Mac OS X Snow Leopard server with Mail services enabled. I have went through routine of configuring DNS, Open Directory and adding users. I could eventually run Mail services for the client for the outgoing mail, but I can't receive any incoming mail. Mail logs keep telling me that relay access is denied. Here is the example of this:
Jun 28 12:13:15 paulmacserver postfix/smtpd[5895]: NOQUEUE: reject: RCPT from va3ehsobe006.messaging.microsoft.com[216.32.180.16]: 554 5.7.1 <[email protected]>: Relay access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<VA3EHSOBE007.bigfish.com>
Jun 28 12:13:15 paulmacserver postfix/smtpd[5895]: disconnect from va3ehsobe006.messaging.microsoft.com[216.32.180.16]
Here is the log from postconf -n command:
paulmacserver:~ administrator$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks =
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
message_size_limit = 10485760
mydestination = $myhostname, localhost.$mydomain, localhost, mail.lifefor.net
mydomain = lifefor.net
mydomain_fallback = localhost
myhostname = paulmacserver.lifefor.net
mynetworks = 127.0.0.0/8
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated permit
smtpd_enforce_tls = no
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_pw_server_security_options = gssapi,cram-md5
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/paulmacserver.lifefor.net.6067B0918DA5FE13DDE10C3696E054EF3D3 29F34.chain.pem
smtpd_tls_cert_file = /etc/certificates/paulmacserver.lifefor.net.6067B0918DA5FE13DDE10C3696E054EF3D3 29F34.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/paulmacserver.lifefor.net.6067B0918DA5FE13DDE10C3696E054EF3D3 29F34.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps = $virtual_maps
paulmacserver:~ administrator$
The server sits behind firewall and has NAT routing of port 25 to the local network address of the server. Local network address range - 192.168.10.0/24, server address - 192.168.10.5, gateway address - 192.168.10.1.
paulmacserver:~ administrator$ dig lifefor.net
; <<>> DiG 9.6.0-APPLE-P2 <<>> lifefor.net
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 29752
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;lifefor.net.                              IN          A
;; AUTHORITY SECTION:
lifefor.net.                    10800          IN          SOA          paulmacserver.lifefor.net. administrator.lifefor.net.lifefor.net. 2011062801 86400 3600 604800 345600
;; Query time: 1 msec
;; SERVER: 192.168.10.5#53(192.168.10.5)
;; WHEN: Tue Jun 28 11:21:16 2011
;; MSG SIZE rcvd: 105
paulmacserver:~ administrator$ sudo changeip -checkhostname
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Primary address     = 192.168.10.5
Current HostName    = paulmacserver.lifefor.net
DNS HostName        = paulmacserver.lifefor.net
The names match. There is nothing to change.
dirserv:success = "success"
All appears to be OK... But I still couldn't make incoming e-mail to work. What do I have wrong?
Thanks in advance!

I dislike split-horizon DNS configurations, and that looks to be what you are trying here.
Based on changeip, your private DNS looks OK, but your public DNS is incorrect.
In particular, you have no reverse DNS for your public IP address 80.244.227.174. Work with your ISP to get that to mail.lifefor.net. This misconfiguration will usually cause issues with outbound mail; many remote servers won't accept mail arriving from this server.
This entry mydestination = $myhostname, localhost.$mydomain, localhost, mail.lifefor.net does not include your domain name. You'll want to add $mydomain into the list you'll accept mail for within Server Admin. This is likely the central trigger for the relay error.
Additionally, you will probably want to have your mail server host configured to use the internet host name mail.lifefor.net within the mail setup (or switch your public name to paulmacserver); you're running split-horizon DNS, and you've chosen to use two different host names for this box. It's both mail.lifefor.net and paulmacserver.lifefor.net. It's possible to do that, but it tends to confuse things.
As for errata, you'll want to enable anti-spam and add zen.spamhaus.org or analogous within Server Admin to fix your current accept-from-everywhere setup. With those changes, you'll see smtpd_recipient_restrictions add check_policy_service unix:private/policy and smtpd_client_restrictions will add reject_rbl_client zen.spamhaus.org

Relay access denied (state 13)

Hello everyone, I am new to servers so please excuse my lack of knowledge.
I setup Lion Server and got everything setup in terms of configuration, DNS and such. I am able to send emails but I cannot receive them, they are always bounced back immediately with the message Relay access denied (state 13). The domain I am trying to setup email for is iconyearbook.com and the server's domain is server.iconyearbook.com
Thank you,
Brian

This is less about MX records than it is your mail server configuration.
Quite simply, your mail server doesn't know that it's supposed to accept mail for johnbutzek.com, so when it sees such a message it assumes it's supposed to relay it to another server, or bounce it if the sender isn't authenticated/trusted.
Changing the MX may be valid, but it's not going to fix the problem. If the MX record points to this server all you'll get are 'MX points back to me' errors in the postfix log.
Instead, you need to tell postfix what domain(s) it is supposed to accept mail for. RIght now it sounds like you have it set for 'server.johnbutzek.com' and that's your problem. Change it to 'johnbutzek.com' and your problem should go away.

Access Denied error on Registry Key with CRXIR2A SP6

We ship now the latest CRXI version (2ASP6) with our application. One of our users (Win7 Home SP1) gets an error on instantiating a report. Using ProcMon.exe this seems to be caused by an Access Denied error when accessing the HKLM\Software\Wow6432Node\Business Objects\Suite 11.5\Crystal Reports key. What can be the cause?

Hello Ludek,
I had to take ownership and then change persmissions to full. The problem did not go away however. As I noticed that the register key mentioned did not contain any subkeys I tried to remove it. This again failed because of persmission denied error. Funnily some subkeys suddenly showed up. I took ownership, changed permissions and tried again. Lo and behold the subkeys I tried to delete (and in which no subkeys were visible) suddenly showed more subkeys. At this point I stopped fearing that I was damaging the client's computer. The subkeys were related to the RAS server. Does that say anyting to you?
André

Access denied error while trying to install graphics drivers

Hello,
I have a new toshiba laptop P70-A. I have installed windows 7 and the pc was working excellent up until now. Noticed yesterday that the nvidia automated system failed to install the new update. When I tried to install the new driver manually, even from the
device manager, I got the access denied message.
A day now wasted reading all the possible causes and solutions but with no luck. Read all the forums and all the posts, tried almost everything. Below youll find everything I tried as a solution and failed.
1.Disabled UAC
2.Enabled the administrator account and trying to take control from there
3.Run the subinacl and the reset.cmd
4.Tried manually to take control the folder windows (and access denied while changing the rights)
5. Scanned the system with everything there is available ( Kaspersky, MalwareBytes, RegCurePro, Tuneup Utilities, CCleaner) The system came out clean.
6. Tried restoring the system to an earlier time (got again access denied error code 0x80070005)
7. Checked all the group policies (all seem to be fine)
8. Run a script to take immediate ownership over all of C:
TAKEOWN /A /F C:
then the next one
TAKEOWN /F C:
9. With subinacl I run all the above scripts... (still nothing changed)
@echo off
title Resetting ACLs...
echo.
echo Determine whether we are on an 32 or 64 bit machine
echo.
if "%PROCESSOR_ARCHITECTURE%"=="x86" if "%PROCESSOR_ARCHITEW6432%"=="" goto x86
set ProgramFilesPath=%ProgramFiles(x86)%
goto startResetting
:x86
set ProgramFilesPath=%ProgramFiles%
:startResetting
echo.
cd /d "%ProgramFilesPath%\Windows Resource Kits\Tools"
echo.
echo Resetting ACLs...
echo (this may take several minutes to complete)
echo.
echo IMPORTANT NOTE: For this script to run correctly, you must change
echo the values named Athena to be the Windows user account that
echo you are logged in with.
echo.
echo ==========================================================================
echo.
echo.
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators > %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f /grant=restricted=r /grant=Athena=f /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f /grant=users=r /grant=everyone=r /grant=restricted=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
subinacl /keyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f /grant=users=r /setowner=administrators >> %temp%\subinacl_output.txt
echo.
echo.
echo System Drive...
subinacl /subdirectories %ProgramFilesPath%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo Windows Directory...
subinacl /subdirectories %windir%\ /grant=administrators=f /grant=system=f /grant=users=e >> %temp%\subinacl_output.txt
echo.
echo.
echo ==========================================================================
echo.
echo FINISHED.
echo.
echo Press any key to exit . . .
pause >NUL
Im frustrated really... ANY help at all would be really appreciated.
Thanks in Advance and sorry for the long post
Athena

Hello,
Thanks for the replies, i much appreciate it. I tried all of the above with no luck again. Safe mode allows me though to install drivers but thats reverting the moment im entering windows. Im always running commands and programs as a administrator or in
the Admin enabled account.
It seems the problem is solved today. Via tune up utilities I disabled most of the startup programs and services and it seems that 1 service is causing this issue. Although I havent played much with the disabled services but 3 remain to be checked. One of
the three is causing this.
Thanks again guys and Ill keep you posted about the soft. conflict.
Athena

Access denied error for Java application on 2630

Hello!
I have bought a 2630 recently. Now I have installed a small Java application that tries to store some data in the phones memory. However, each time the application tries to do so, I get a "java.lang.SecurityException Access denied" message and the application states that it could no save its data. I have set the security settings for that particular application so that the phone should ask before each access to the file system. In fact, before I get the error message, the phone asks whether the application may write data to the file system. But still answering that question with "yes" I get the Access denied error message. Now I am puzzled. By the way, the application uses JSR-75 which the 2630 should support.
Anybody any ideas?
Regards,
Volker

RESOLVED!
I was able to create file from java application on Nokia 2630. Here is how:
1. root C:/ is mapped to folder "Downloads"
2. The folders does not show with their names
3. there are 2 folders in C:/ predefgallery and predefjava
4. in predefgallery there are several predefined folders e.g. predefrecordings is one of them
5. I am able to create file inside predefrecordings, creating file in upper folders is denied
6. user created folders aro NOT shown at all
7. I had to manualy confirm reading of data many times and writing data once.
I hope this can help to other Nokia users since I did not find this anywhere.
Luke

Access denied error while exporting chart to excel

I need to export data from a gridview to chart in excel. Through system account credentials it works fine. But through a user's credentials its giving an access denied error. The gridview data is exported properly but the current chart which is displayed
on page is not getting displayed in excel.
So is there any other way to achieve this?
I was thinking og saving it to virtual folder in the Site but I cannot figure out the exact code for it. Since file upload control is not involved, how to save the chart to the virtual folder. Any inputs on this?

Hello,
Would you mind if you use "runwithelevatedprivileges" in your code to execute code with admin privilege?
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsecurity.runwithelevatedprivileges.aspx
>I was thinking og saving it to virtual folder in the Site
Do you want to save excel in system folder or SP site folder?
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Hello, relay access denied error

Similar Messages

Maybe you are looking for