HELP!! 4s has black screen

My iPhone 4S was working perfectly up until this evening. Have a black screen and can hear if txt's come in and the sound it maes when taking a snap shot. But that is all
Device wasn't hot nor has it been dropped.
.. Help! This is my second one

Try resetting the device: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Home screen will redisplay.
Cheers,
GB

Similar Messages

  • Iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

    iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

    Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
    1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
    2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white?

  • HT1430 Phone has black screen with just time bar at top showing cannot turn off

    Phone has black screen with just time bar at top showing cannot turn off please help

    Basics from the manual are restart, reset, restore
    Follow the 3R's- if a restart does not solve your problem proceed
    User troubleshooting is:
    1.restart, ie power off/on,
    2. reset  http://support.apple.com/kb/HT1430,
    3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

  • After using hibernation, it does not start up and has black screen

    My computer was fine for 2 yrs or so,now it will not startup!  After it was in hibernation, I came back a few hrs later and turned on the power and it has a black screen.  The only things that are lit are the left side blue dot and the f12 button.
    This computer worked perfectly until today, except it tok longer sometimes to come out of hibernation.
    I tries a hard reset according to what the HP website said, nothing worked!!
    Can anyone help ant tell me how to get this thing to work??
    Thanks,
    John

    Hey wealthylives,
    Welcome to the HP Forums!
    As the computer screen is remaining black/blank after the hard reset, I would suggest the following document 'Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot'. Please follow through the steps outlined in order.
    Please let me know the outcome of the troubleshooting.
    Thank you.
    I worked on behalf of HP

  • Camera has black screen

    my camera has a black screen ive tried resting it many times please help

    I would try the basic software troubleshooting: force quitting the camera app via multitasking, restarting, resetting, and then if all else fails, a restore.

  • Ipad  has black screen with white bar

    My ipad2's screen has gone blank. after leaving it uncharged for a good 18 hours. I switched it on to see a blank, black sceen with a white bar moving downwards accross the screen this fades to black.
    I have tried charging it for a good 7 hours as I thought maybe the battery has run down and caused this.
    I have also tried resetting by pressing the on/off and home button together for 10-15 secs but no luck.
    My ipad still synches to my imac okay. I have restored it to factory settings. This didn't help the problem either.
    This actually happened when first took the brand new ipad out of the box and tried turning it on for the first time. But it revived itsself after synching to my imac and being on charge for a few minutes. The support technition I spoke to  at the time didnt really know why it did this but suggested it was a very low batterry issue. Although I am inclined to think its something else, now its happened again and charging does not seem to work.
    Has anyone had the same problem? If so what did you do? Any suggestions on how to fix it would be gratefully recieved.
    Thanks
    P.S. I am running iOS 4.3.3 on my ipad. However its not an available option in the OS dropdown for this discussion. hmmm!

    I Don't know if this will work for anyone else but just FYI - after loading 8.1 on my iPad it froze for several hours on the black screen with white Apple and progress bar underneath. It would not do anything.  I thought I was doomed.  I accidentay left it sitting overnight without plugging it Back into the charger. I meant to but got sidetracked and thought it was plugged in. During the night the battery was totally drained so this morning my iPad was dead. I plugged it into the charger and after a few minutes the battery icon came up showing it was charging. I gave it about 30 minutes and then turned it on and the new operating system came up. It looks like it might be ok now.  I can't say I recommend this, but it worked for me.

  • HELP!! Black screen on my MacBook Pro after leaving open and on for over 8 hours.

    Hi everyone,
    This is the first time I'm using the discussion board as I haven't had any problems with my MacBook Pro since I bought it in November 2010. However, yesterday, I left my laptop on and open for over 8 hours without realising. When I came back to my laptop it had a black screen that just wouldn't go away. I pressed all the buttons on my keypad to wake it up but this didn't work. The caps lock key lights up when pressed and the volume button makes the clicky noise when turned up and down but the screen is still black. I have tried turning the laptop on/off using the power button several times. When it starts up it makes the usual sounds and I can hear that it is on but the screen is still black.
    I do not use my laptop for anything complicated. I really only use it to browse the web. I hope someone can help me. I have tried to make an appointment with the Genius Bar but there are no available appointments at my local one. I'm not a mac expert and don't understand technical words so please speak in layman terms otherwise I won't understand. Any help would be greatly appreciated. Many thanks

    If you've a 15" version, maybe...
    Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
    If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
    Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
    Kernel Extensions in backtrace (with dependencies):
             com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
             com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
             com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
    Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
    So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. They should be more than willing to install a new logic board at no cost. I have no idea why this faulty GPU is making the headline here on the MacBook Pro forum so often now - could it be because Mountain Lion is just bringing the issue to a head more readily? I don't know - I only know that we're seeing more and more of these kernel panics of late.
    Good luck,
    Clinton

  • DVD Player Has Black Screen

    I have a new 15" Mac Book Pro. I am trying to play dvd's that I recorded on a Panasonic DVD Recorder from my Direct TV TIVO Recorder.
    DVD Player recognizes the dvd and will even display the title page but when I try to play the disc all I get is a black screen with DVD Player in the right bottom of the screen.
    Any help out there?
    MacBookPro   Mac OS X (10.4.9)  

    HI Jofoso and welcome to Apple Discussions.
    I located this site. http://www.roughlydrafted.com/RD/RDM.Tech.Q1.07/6FFE4614-E1AB-45C7-8611-19D06ECC AD9F.html
    Something tells me it's the formatting with Direct TV TIVO Recorder that an Apple DVD Player can't read but perhaps there's information in the link above that can help.
    Carolyn

  • Mac book pro has black screen

    My mac book pro with retina display has a black screen. It turns on and off but the screen remains black. The hardware test detected an error: 4SNS/1/40000001:IDOR-0.000

    SNS is a sensor error the letter I later on says it is a current sensor.
    Your Mac needs to visit the genius bar. Your appointment for an evaluation is Free.

  • Arch Linux help - boot up, black screen

    OK, i will try to explain to the best of my ability what happened when i was done installing arch and rebooted.
    Well i booted into arch core-iso and set my time [UTC] and date.
    and then i made for partitions as follows,
    sda 1 - 20 gb - /root, boot, type 83
    sda2 - 12 gb - /var type 83
    sda 3 - 8.3 gb - type 82 - /swap
    sda 4 - rest of memory - type 83 - /home
    then wrote it
    Then went onto install the Base, base-devel + sudo, wirelesstools, ndsiwrappers, wpa - supplicant, ssh, and net - cfg,
    then installed it, then went on the config the system with nano
    - click - /etc/rc.conf
    edited the following
    hostname = "baxxan"
    eth0 = "dhcp"
    gateway= "dhcp"
    ctrl - x, y, enter
    - clicked /etc/pacman.d/mirrorlist
    then uncommented the [#] next to the url
    "http://mirrorit.edu/archlinux/$repolos/1000"
    and the ftp to
    then set the root password
    Then went onto install bootloader [ the hdd was empty so not much work there]
    installed it on /dev/sda
    then rebooted
    upon reboot i preformed system update
    [pacman -Syu] as the root user
    then through pacman installed xorg, gnome, gnome-extra, and alsa-utils
    then configed the /etc/rc.conf files [ nano /etc/rc.conf]
    and added "hal" and "gdm" to the daemons
    then typed "adduser"
    and completed on the required asked for information for adding that user
    then went onto /etc/sudoers [nano /etc/sudoers]
    and under,
    root ALL= (ALL) + ALL
    wrote,
    username ALL = (ALL) + ALL
    THEN saved and rebooted. and was happy i was done with my arch linux install!
    BUT WHEN I REBOOTED, and went into arch linux through the new bootloader, NOTHING but a BLACK SCREEN, comes up with two little white lines near the top! i even tried booting into the fallback option and its the same black screen with 2 little lines near the top!
    WTF IS GOING ON!
    Please help
    Thank you,
    P.S -
    dont send me the dam link to the beginners cause i READ It, believe me.
    Thanks!

    litemotiv wrote:
    please don't put text like URGENT or HELP! in your topic titles, it will only distract people from the actual problem
    about your issue, it could be a problem with [wiki]KMS[/wiki]. first thing to try is to disable it (see the wiki page and search the forums for topics concerning your specific brand/type of card and bootup problems)
    k r u sure this is the problem, also the KMS link you sent me, is that the wiki?

  • MacBook Air has black screen with file and question mark

    Some one please help me. My screen on my MacBook Air is black with a flashing file and a question mark. I Can't get past this. What do I do? Thanks.

    Click here and follow the instructions.
    (123289)

  • Help! Powerbook Black Screen

    I need your help guys! I was trying to watch a dvd movie in my lombard using vlc when suddenly it freezes. When I tried to restart it, the powerbook gives a black screen with a big power button image on it and says that i have to restart the computer. But the thing is, when i tried to restart it again, the message still shows. Please help me with this one. Thanks a lot!
    Leo

    leo,
    Try the suggestions in this article:
    http://docs.info.apple.com/article.html?artnum=106805

  • Help solving the Black Screen of Death

    Hello There!
    I have an HP Touchsmart 610-1100z 3 days ago I put it to sleep and when I tried to wake it up nothing happened.  I restarted it and it was just a black screen, no HP logo ect, but I could hear all the fans and drives working.  I checked the light issue with a desk lamp and revealed that is not the problem.  I then tied the BIOS F10 to F5 work around with no luck.  I have gotten it to boot up twice since then by repeatedly turning it off and on until by sheer luck it just boots up.  When it boots up there is absolutely no issue but clearly something is eskew that I would like to fix so that I don't live in fear of turning off my computer.  Does anyone have any ideas?

    Hello Vman009,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are getting a blank screen when you boot your HP Touchsmart 610-1100x All-In-One Desktop PC. I am providing you with a link to an HP Support document: HP and Compaq All-in-One and TouchSmart Desktop PCs - Screen is Blank after Starting the Computer, which addresses what appears to be the issue you are describing. I would recommend that you review the document and make the adjustments recommended.
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • G70-246US Laptop has black screen and won't start

    Hi Everyone, 
    I have an HP G70-246US laptop. I received an errot that the computer could not find any Boot Disks. I turned it off and rebooted the computer and it would not come back on. I see nothing but a black screen. The power button light comes on but the hard drive light does not.
    There is no sound of system startup, none of the f1, options work. The power button and the wireless button are lit and the dvd player allows me to put a cd in and eject it but nothing works.
    I took the hd out and put it back in to make sure it was connected securely and still nothing. I am trying to get an idea of what needs to be pinpointed before I purchase a new hard drive.
    Unfortunately, I am over my one year warranty time period. I really need to figure out a resolution soon as I design websites and without my computer, I can't finish my work.
    Any help is greatly, greatly appreciated.
    Thanks in Advance.

    With the hdd out can you access the BIOS by tapping the F10 key after powering on? If so that would pretty well point to the hdd causing the problems. Your machine came with a 160Gb SATA hdd. If you will be using your Recovery Disks to reinstall you need at least that large to use them,can be larger but no smaller.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IMac has black screen/beeps after attempt to update Keyboard - no restart

    I attempted to follow the instructions.... got a restart screen with a uploading box.... I accidently stopped holding the ON button down... and now I only have a black screen with beeps... help, please

    EllenSears wrote:
    I attempted to follow the instructions.... got a restart screen with a uploading box.... I accidently stopped holding the ON button down... and now I only have a black screen with beeps... help, please
    Welcome to the Apple boards:
    Were you holding down the Power button while the computer was still running? That's wrong and if that's what you did, you aborted the update and forced the machine off.
    See if you can reboot in the safe mode - hold down the shift key while booting.
    If you have corrupted the keyboard firmware, you may need to take the computer to Apple - I hope that is not the case.
    One should never interrupt a firmware update.

Maybe you are looking for

  • Doubt in select

    hai gurus i have a doubt i have a select statement like this select count(*) into var from emp; i want to store it into variable.it giving some error; please give some ideas thanks

  • Warning 'Calculating result as....' was not executed

    Hi all, At the time of executing a report, after giving the inputs for variables I am getting an warning messager: Warning 'Calculating result as....' was not executed'. Kindly advise. Thank you, Praveen

  • Daily Sudoku Will No Longer Print Out

    Daily Sudoku worked great for several days after I first got my HP printer.  Now it will no longer work--I've tried to set it up again several times to no avail.  Please help!

  • APACHE DAYING AFTER DR WATSON ACTION

    Hi portal admins!! Does anybody implement patch no:2128936, with subject : "SECURITY HOLE : MODPLSQL VULNERABLE TO SERVER ATTACK" ? I got this patch as the solution for daying apache process on our IAS server. (there is no any entry in error log of a

  • Custom code coloring

    dreamweaver 8 PHP Syntax coloring i am wanting to color all inside <<<EOD and EOD; to red so all code between appear as a string where do i make this change in the XML files available