HELP!!! - About creating a server in java

Is it possible to create a server in java, that if i
connect to someone(a server or not) i'll still remain
the server and the other side will become my client ?
If that's possible so please tell me how to do it
please!I am not too sure if I fully understand your request. But you can create a server which handles requests from clients. Also in a separate thread you can create your own client to communicate with the other server.
Check this tutorial from IBM's site, it may help you.
http://www-106.ibm.com/developerworks/edu/j-dw-javasocks-i.html
Good Luck

Similar Messages

How to create Proxy Server in Java

Hello I need to create Proxy server on port number 80. Does enybody knows how to do that.??? ThX

A proxy for what?
I assume that you mean a web proxy since you want to run port 80.
I would recomend that you start with an existing proxy like mine.
http://www.khelekore.org/rabbit/
It is free and fully HTTP/1.1 compliant.

Need help in creating virtual server

Hi
I have configured the sun ONE portal server to run on a domain p1.test.com. A default virtual server with the listen socket is existing for this virtual server. But now I need to access the portal with another domain name p1.test.co.in. I have tried creating another virtual server but it is not working. Please help me in creating the virtual server. For the "urlhost", whether I have to specify the original machine name or new domain name. Please help me in this issue.
Regards
ram

Hi,
Thanks for your reply. Actually I need the same content for both the url's. The DNS entries are already for the two urls's. It is getting the login page. But after giving the credentials it dosent brings the portal desktop page (seems to be going in a loop).
I have my Sun ONE LDAP server configured with the domain "test.com". Is there any changes that I have to make in the LDAP. Please help me in this issue.
Thank You.
Best Regards
ram

Help to create a webgis raster-java

Hi, I'm trying to create a web gis in java for my first time and I'v a lot of problems.
Can anyone help me? I searched en example for raster viewer or webgis, in java, with rasters opensource, but nothing, I haven't find it. I search this programs for see how muss I export the raster and how can I show the images on the web or in a java program with their georeferences.

Hi, I'm trying to create a web gis in java for my first time and I'v a lot of problems.
Can anyone help me? I searched en example for raster viewer or webgis, in java, with rasters opensource, but nothing, I haven't find it. I search this programs for see how muss I export the raster and how can I show the images on the web or in a java program with their georeferences.

Ask help About Create Direct Database Request

Hi, all.
When I using the Create Direct Database Request, how can I specify a variable which can used to receive multiple input value?
My SQL like this:
select... from table t1 where t1.c1 in('@{v_c1}{001})
where, v_c1 is the variabe name, 001 is the defaut value of the variable.
But, it doesn' work.
If it's the systax error, then how can I correct it?
Thank you in advance.

Hi katherine,
Your connection pool should look like this "DEV_BI"."Connection Pool"
Second thing is go to Administration/Manage privileages/Direct database privileage is there.
If you want to use variables into your SQL query follow this link
http://bintelligencegroup.wordpress.com/2010/08/26/how-to-use-the-presentation-variable-in-direct-database-request/
Hope it helps you.
By,
KK

Need help about Oracle Application Server Terms

Is Oracle Application Server called Weblogic Server?
What is the difference between it and the HTML_DB or Application Express? are they the same? Can all run JSP? and what other supported languages?
I am just little bit confused about those terms(Middleware, Application Server, HTTP Server, HTML_DB, Application Express, Oracle Fusion)
Would appreciate if someone can explain them briefly with examples for getting more clear.
Thanks.

The name of this forum is "Installation." What does your question have to do with installation?
Information on Oracle's strategy for replacing the 10g App Server code line with the BEA WebLogic code can be found by going to http://otn.oracle.com and searching for information on Middleware Strategy.
This forum is not an appropriate place to answer your other questions either: Use google.

Help about Create Report in SCCM

Hi guys,
I want create report display software specific by collection. Example: I need know all desktops in my collection have software specifc called Winrar installed. But I don't know hostname.
I need something where I don't need always create query. Example: After create report I can search a lot of programs. I say this because I have some query's but I always need create query for this.
Any idea?
PS: Reports: Software02E,Software02D It doesn't fit for me.
Thanks.

Computers with specific software registered in Add Remove Programs
This is pre-canned.

I need a help in creating a socket server ...

Hi
i need a help with creating a server that listen to a port(specified one). when the connection occured from the client, it should respond with a random number generator only.
it's a socket program.
thank u very much

kiiwii14 wrote:
i mean i didn't take java yet in the college. and, i'm gonna take it next course.
and,the Dr. gave us an assignment to do it in java. and, i ask him to do it in other language(c++) but he insist to do it in java. so, i'm asking for help...
i hope it's clear know...If you know some c++, the learning curve doesn't have to be very steep. If you haven't got an IDE yet, that's the first thing to do - Eclipse is free and quite good. Ask it to create a new class, e.g. NumberServer and have the option to create a main method checked. Finish the server part first - you should be able to communicate with it through telnet. Put in a lot of System.out.println so you see what your program is doing, or better yet, learn to use the IDE's debugger - which is good in Eclipse. Read the javadocs for the classes mentioned in an earlier response, and search this forum or Google for their usage if you find the documentation lacking. Then when you have specific problems that you need help with, you can create new questions for them here.

Beginner in java and need your help about DES

hello,
I m a new guy in java programming and learn from many books.I m making a website and portal right now and dying need your help about DES.my portal (using java) requires somebody to make a login name and a password.I m done with the server and client things and rite now stuck with this "DES" stuff.
so I make some conditions and algorithm below..
1. when a user login,the password is encrypted.at this point,cleartext(id) and encryption (M,N) are involve.
2. then the key is changed based on algorithm.
3.the key changed by key(id) is received and the original text should be encrypted.
the algorithm
1. the original text x1.x2.x3.x4.x5.x6.x7.x8 (64 bits)
2. encypt the password
a. Each character is changed into an int type by the ASCII code, and let the 1st bit be an odd number parity bit.
b.The 1st bit of the 1st character in (IP) is set to '1', and the 8th bit of the 8th character as '64'.
c.the rest (IP) is like this
1 2 3 4 5 6 7 8
0 # 58 50 42 34 26 18 10 2
8 # 60 52 44 36 28 20 12 4
16 # 62 54 46 38 30 22 14 6
24 # 64 46 48 40 32 24 16 8
32 # 57 49 41 33 25 17 9 1
40 # 59 51 43 35 27 19 11 3
48 # 61 53 45 37 29 21 13 5
56 # 63 55 47 39 31 23 15 7
d. and lastly,from above,,it should be done like this
1 2 3 4 5 6 7
0 # 40 8 48 16 56 24 64 32
8 # 39 7 27 15 55 23 53 31
16 # 38 6 26 14 54 22 52 30
24 # 37 5 25 13 53 21 51 29
32 # 36 4 24 12 52 20 50 28
40 # 35 3 23 11 51 19 49 27
48 # 34 2 21 10 50 18 48 26
56 # 33 1 20 9 49 17 47 25
e. key y1,y2,y3,y4,y5,y6,y7,y8 (64bit)
f. generate the key based on ID
a. Each character is changed into an int type by the ASCII code, and let the 1st bit be an even number parity bit.
b.the process is repeat again.
anybody has an idea to help me with the sample program?
thanks in advance...

just ask about a simple program how to receive a
password from somebody and change it to a key..and
then confirm it with DES.Once again I have a problem understanding what you are asking.
Are you trying to use the password as a key to encrypt some 'standard thing' and place this encrypted value in a database? If so then look in the JCE for 'password based encryption' such as PBEWithMD5AndDes. This seems back to front to me but I can see nothing wrong with the approach since the 'standard thing' you would encrypt is in effect a key. If this is for a commercial application then I would find a security expert to evaluate your proposal!
In my experience it is more normal to encrypt the user's password with DES and store the result in the database. To do this just look in the JCE for DES encryption and consider using DES with CBC and PKCS5 padding. Also, consider encrypting the concatenation of the user's 'user name' with the password as this will (almost certainly) avoid having two encrypted values in the database that are the same even if two users have the same password.
For both of these you might consider using Base64 or Hex to turn you encrpted bytes into ASCII characters before trying to store them in your DB.

Topics that help to create a project report about Java Report Generator?

hi all,
i'm doing a project on java that could be utilised to create reports for java programs..i want to make a project report on this topic.if anyone knows about sites those helps to create report please reply..
Preethi

JasperReports is a powerful report-generating tool that has the ability to deliver rich content onto the screen, to the printer or into PDF, HTML, XLS, CSV and XML files.
http://jasperreports.sourceforge.net
There is a convenient visual designer to create reports for jasperreports library called iReport.
Take a look at http://ireport.sourceforge.net
Giulio

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

How should we be going about creating and saving and/ or exporting our ODC files using Excel 2013 for use in Project Server 2013 Online?

Hi I need your guidance on how I should go about setting up my Excel 2013 reports so that others in our Project Online 2013 environment can access and updates these reports of mine.
My questions are as follows:
I presume I need to create and save my ODC files in a PWA > Data Connections folder. I have English and French users in our environment. Do I need save them twice? Once in the French and again in the English Data Connections folder?
Likewise for the Excel file?
How should I go about creating my ODC files within Excel? By default, the ODC files are being created on my PC's > My Documents > My Data Sources folder. I presume I need to get them saved or exported to the PWA > Data Connections
folder. So, How should I be going about creating and saving and/ or exporting the ODC files???
FYI...My oData Feeds that I wish to use and join in this particular Excel file are as follows:
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/AssignmentTimephasedData01T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Projects()?$select=ProjectId,ProjectName,CAS_Classification,CAS_PCO,CAS_IT_Department,CAS_Program,CAS_SubProgram
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/TimeSet()?select=TimeByDay,TimeDayOfTheWeek$filter=TimeByDay ge datetime'2014-10-19T00:00:00'
https://cascades.sharepoint.com/sites/pwa/_api/projectdata/Resources()?$select=ResourceId,ResourceName,Programs,Supplier,Source,Role,CostType
Thanks in advance,
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Thank you Guilaume. May I ask you to help clarify a bit more for me? If I have to do it for both languages (the reports and ODC files), do I simply copy the same ODC files from e.g., the English to French folder in PWA (Odc files)? Or does
that defeat the purpose? Or, do I need to create a new set of oData Feed Connection files with a French version of Excel 2013 and save them to the French Data Connections folder in PWA? Do I need to have a French version of Excel 2013 to create
French ODC files and ultimately French based reports and/ or vice versa?
I did notice that the following oData metadata command from within a browser produces different results (ie., English versus French metadata returned) depending on who runs it (i.e., French or English user, etc). As you can see I am a bit confused.
Any help you can provide would be greatly appreciated.
https://XXXXX.sharepoint.com/sites/pwa/_api/projectdata/$metadata
\Spiro Theopoulos PMP, MCITP. Montreal, QC (Canada)

Help Requested - Creating Solaris 10 x64 Virtual Machine on an ESX Server

Hi All,
I have been trying to create a Solaris 10 64 bit Virtual Machine on ESX and VMWare server Virtualization Platform.
One of the forum entries said - The installer doesn't really care. At every boot, the processor type will be determined and a 32-bit or a 64-bit kernel will be run (unless you override it)
I hence downloaded the iso from http://www.sun.com/software/solaris/get.jsp and I installed it. When I run uname -a command on the terminal, this is what is displayed -
SunOS unknown 5.10 Generic_127128-11 i86pc i386 i86pc
This indicates that the kernel is 32 bit right?
Please help me create the 64 bit VM.
Thanks in Advance,
Raj.

Hi,
I am having lots of trouble doing a jumpstart
installation of Solaris 10
on a T1000 Server.
My setup
Using Debian Sarge as the Jumpstart Server ( I have
used this machine to install Sol 8 and 9 on Sun
V240/210. Running TFTP Server, RARPD,
BOOTPARAMD,NFS.
T1000 - No OS installed.
Attempted an Install by doing - boot net -v install
Below is the screen output.
Rebooting with command: boot net -v install
Boot device: /pci@7c0/pci@0/network@4 File and args:
-v install
100 Mbps FDX Link up
Requesting Internet Address for 0:14:4f:21:b9:c4
Requesting Internet Address for 0:14:4f:21:b9:c4
100 Mbps FDX Link up
Using RARP/BOOTPARAMS...
Internet address is: 192.168.2.35
hostname: sun-server
domainname: milky
Found 192.168.2.1 @ 0:20:e0:65:48:3d
root server: 192.168.2.1 (192.168.2.1)
root directory:
/jumpstart/2.10/Solaris_10/Tools/Boot
Found 192.168.5 @ 0:d:56:10:13:28Don't see any problem here.
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:
Do it a favour. Go Sarge box and goto /jumpstart/2.10/Solaris_10/Tools/Boot
and check do you have required kernel (kernel/sparcv9/unix)
also check your privilege for the file please.
I think it is possibly not mounting the nfs share. I
have already changed the NFS_client variable to 3
under etc/default/nfs in the Boot directory.
I would appreciate any help or suggestions.

Question about creating Forms in Java.

Hello , im new to Java , i find kinda weird how Java creates Forms , its pretty simple in Oracle Forms ,
why did Java designers make it this difficult ? do people say this is something bad about Java ?
when i learned about the Layout Managers that Java provides i found out how much code one have to write just to create a simple form ,my question to the experienced java developers : what do you do to create a form , do you hard code it ? , or do you use something like GUI Builder in an IDE like NetBeans for example? and is the code generated by this builder easy to deal with and modify ?
Thanks ....

HeavenBoy wrote:
Hello , im new to Java , i find kinda weird how Java creates Forms , its pretty simple in Oracle Forms ,
why did Java designers make it this difficult ? do people say this is something bad about Java ?Some Oracle Forms fans certainly do. But the truth is that Oracle Forms application tie down all the components in fixed pixels. The typical Swing form can be resized and can function at different screen resolutions. So, when designing a Java form, we don't tend to work on a fixed grid but define the sizes and positions relative to other components. What's more the interface between the form elements and the data is completely flexible, and flexibility means extra effort.
>
when i learned about the Layout Managers that Java provides i found out how much code one have to write just to create a simple form ,my question to the experienced java developers : what do you do to create a form , do you hard code it ? , or do you use something like GUI Builder in an IDE like NetBeans for example? and is the code generated by this builder easy to deal with and modify ?
Most I've tried have been a bit of a straitjacket, but I've recently been using the latest Netbeans offering and it's pretty good. I think the breakthrough was the introduction of the GroupLayout layout manager. This is a layout manager really designed for WYSIWYG form designers (pretty challenging to use hand coded).
The way these things work is that the class generated contains some methods which cannot be edited by hand, but you can add any amount of your own code without interfering with the generated code. You hook your own code snippets into the generated code, for example you can select a property of an object, say the model of a JTree, and select "user code", then type in an expression returning the TreeModel you want to use.
With listeners the designer will generate the method signature etc. but you can edit the body of the listener method.
However I would always recommend that you hand code a form or two before resorting to on of these editors because it's important you understand the code, even where a designer writes it.

Error while creating data server to connect into Hyperion Financial Manag.

Hi Cezar and others gurus,
I need some help in the follow issue:
I imported the technologie HFM (hyperion financial management) and it`s now displayed normally in the Physical and Logical architecture.
The drivers imported are: HFMdriver.dll
log4j-1.2.8.jar
odi_hfm.jar
odihapp_common.jar
And also imported the KMs about HFM.
Everything doing fine but when i try to create a data server into Physical Architecture, and went to test it, two different errors are shown (below).
i've already read many documentations but they didn't help.
I have ODI 10.1.3.4.0 and the hyperion server is working fine.
ODI server, my ODI client and HFM are located in the local machine.
In the "Topology manager" in "Physical Architecture" under the "Hyperion Financial Management" I try to create "Data Server" and in the definition tab I filled "Name", "Server" (without port), "User", "Password".
In the JDBC tab I did nothing.
I go test and the errors appears.
In the physical schema in the definition tab I cannot fill the items "Application (Catalog)", "Application (Work catalog)" because they don`t have any option and i let them "undefined"
When i select "Local (no agent)",receive the error:
Connection failed
Java.lang.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
     at com.sunopsis.graphical.r.or.o(or.java)
     at com.sunopsis.graphical.r.or.r(or.java)
     at com.sunopsis.graphical.r.or.g(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.il.actionPerformed(il.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.r.or.q(or.java)
     at com.sunopsis.graphical.r.or.<init>(or.java)
     at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
     at com.sunopsis.graphical.frame.bn.w(bn.java)
     at com.sunopsis.graphical.frame.bn.d(bn.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener$ReleasedAction.actionPerformed(Unknown Source)
     at javax.swing.SwingUtilities.notifyAction(Unknown Source)
     at javax.swing.JComponent.processKeyBinding(Unknown Source)
     at javax.swing.JComponent.processKeyBindings(Unknown Source)
     at javax.swing.JComponent.processKeyEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
     at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
and when i select a agent created before, i receive:
Connection failed
Java.land.Exception
at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.s(or.java)
     at com.sunopsis.graphical.r.or.g(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.or.a(or.java)
     at com.sunopsis.graphical.r.il.actionPerformed(il.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.Dialog$1.run(Unknown Source)
     at java.awt.Dialog.show(Unknown Source)
     at java.awt.Component.show(Unknown Source)
     at java.awt.Component.setVisible(Unknown Source)
     at com.sunopsis.graphical.r.or.q(or.java)
     at com.sunopsis.graphical.r.or.<init>(or.java)
     at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
     at com.sunopsis.graphical.frame.bn.w(bn.java)
     at com.sunopsis.graphical.frame.bn.d(bn.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Some help will be gratefully aprecciated.
Thanks in advance,
Best regards,
Daniel Hein

Good morning Cts and other gurus,
Thanks for the answer but i'm still not able to connect to HFM.
I am getting an error while trying to reverse engineer (this errors is shown at Agent): error ocurred in driver while connecting to HFM [<undefined>] on [apphyp] using user-name [sql_hyp].
Caused by: com.hyperion.odi.hfm.wrapper.HFMexception: opening HFM application failed. Error code: 0x80046053 [This application is not registered with Hyperion Shared Services. Please contact your administrator]
You told me that it`s normal the error when i try to test the data server but both Application (catalog) and Application (Work) stay <undefined> and nothing can be select in that section. I guess this should be completed with my existing applications ate HFM.
Probably, the error mentioned happens because this item "Application" isn`t correct.
What am i missing?
Thanks in advance,
Best regards,
Daniel Hein

HELP!!! - About creating a server in java

Similar Messages

Maybe you are looking for