Help about location based classes
Helo. i need some help about location classes(i use J2ME). i want to develop a gps compass application. when i connected to gps, orientation is shown on a compass.(for example if i go to northeast direction, compass indicator shows the direction between nort and east).
I made connecting GPS. Now i must draw a compass and show the direction informations on it. For doing this, which location classes i can use?
(i do search about this,but i didn't decide which class i should use. I thought that i can use Orientation class for this. I found a source code and tried it. According to this snippet source code about orientation class, my phone doesn't support Orientation class.But i found an application about gps compass, it works on phone. )
i write this question CLDC{MIDP part.
Thanks...
Similar Messages
-
Need Help about Certificate based Authentication
Hi friends..
Currently, i'm trying to develop an applet that using Certificate Based Authentication..
i have looked at this thread : http://forums.sun.com/thread.jspa?threadID=5433603
these is what Safarmer says about steps to generate CSR :
0. Generate key pair on the card.
1. Get public key from card
2. Build CSR off card from the details you have, the CSR will not have a signature
3. Decide on the signature you want to use (the rest assumes SHA1 with RSA Encryption)
4. Generate a SHA1 hash of the CSR (without the signature section)
5. Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
6. Send DigestInfo to the card
7. On the card, the matching private key to encrypt the DigestInfo
8. Return the encrypted digest info to the host
9. Insert the response into the CSR as the signature
Sorry, i'm a little bit confused about those steps.. (Sorry i'm pretty new in X509Certificate)..
on step 4,
Generate a SHA1 hash of the CSR (without the signature section)
Does it mean we have to "build" CSR looks like :
Data:
Version: 0 (0x0)
Subject: C=US, ST=California, L=West Hollywood, O=ITDivision, OU=Mysys, CN=leonardo.office/[email protected]
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (1024 bit)
Modulus (1024 bit):
00:be:a0:5e:35:99:1c:d3:49:ba:fb:2f:87:6f:d8:
ed:e4:61:f2:ae:6e:87:d0:e2:c0:fd:c1:0f:ed:d7:
84:04:b5:c5:66:cd:6b:f0:27:a2:cb:aa:3b:d7:ad:
fa:f4:72:10:08:84:88:19:24:d0:b0:0b:a0:71:6d:
23:5e:53:4f:1b:43:07:98:4d:d1:ea:00:d1:e2:29:
ea:be:a9:c5:3e:78:f3:5e:30:1b:6c:98:16:60:ba:
61:57:63:5e:6a:b5:99:17:1c:ae:a2:86:fb:5b:8b:
24:46:59:3f:e9:84:06:e2:91:b9:2f:9f:98:04:01:
db:38:2f:5b:1f:85:c1:20:eb
Exponent: 65537 (0x10001)
Attributes:
a0:00
on step 5, Build a DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) that contains the message digest generated in the previous step
How DigestInfo structure (BER encoded TLV that you can get from the PKCS#1 standard) looks like?
And what is the DigestInfo Contains, and what is TAG for DigestInfo?..
Please help me regarding this..
Thanks in advance..
Leonardo CarreiraHi,
Leonardo Carreira wrote:
Sorry, Encode the Public Key is handled by On Card Application or Off Card Application?..
I think its' easier to encode the public key by Off Card app..
Could you guide me how to achieve this?, i think Bouncy Castle can do this, but sorry, i don't know how to write code for it.. :( All you need to do is extract the modulus and exponent of the public key. These will be in a byte array (response from your card) that you can use to create a public key object in your host application. You can then use this key to create a CSR with bouncycastle.
I have several some questions :
1. Does Javacard provide API to deal with DER data format?JC 2.2.1 does not buy JC 2.2.2 does, however I believe this is an optional package though. You can implement this in your applet though.
2. Regarding the Certificate Based Authentication, what stuff that need to be stored in the Applet?..
- I think Applet must holds :
- its Private Key,
- its Public Key Modulus and its Public Key Exponent,
- its Certificate,
- Host Certificate
i think this requires too much EEPROM to store only the key..This depends on what you mean by Certificate Based Authentication. If you want your applet to validate certificates it is sent against a certificate authority (CA) then you need the public keys for each trust point to the root CA. To use the certificate for the card, you need the certificate and corresponding private key. You would not need to use the public key on the card so this is not needed. You definitely need the private key.
Here is a rough estimate of data storage requirements for a 2048 bit key (this is done off the top of my head so is very rough):
~800 bytes for your private key
~260 bytes per public key for PKI hierarchy (CA trust points)
~1 - 4KB for the certificate. This depends on the amount of data you put in your cert
3. What is the appropriate RSA key length that appropriate, because we have to take into account that the buffer, is only 255 bytes (assume i don't use Extended Length)..You should not base your key size on your card capabilities. You can always use APDU chaining to get more data onto the card. Your certificate is guaranteed to be larger than 256 bytes anyway. You should look at the NIST recommendations for key strengths. These are documented in NIST SP 800-57 [http://csrc.nist.gov/publications/PubsSPs.html]. You need to ensure that the key is strong enough to protect the data for a long enough period. If the key is a transport key, it needs to be stronger than the key you are transporting. As you can see there are a lot of factors to consider when deciding on key size. I would suggest you use the strongest key your card supports unless performance is not acceptable. Then you would need to analyse your key requirements to ensure your key is strong enough.
Cheers,
Shane -
F4 Help in ALV GRID class based
hi
you have any idea about how to invoke the F4 help in ALV GRID Class based program.,
if u have any other related document or program using F4 function in ALV GRId please send to me for reference
Thanks & Regards
K.Ghi for what kind of fields you need to give f4.
are they std or custom...
please let me know about the fields..
try to check my logic which i gave in the below post..
it will give f4 help to the fields(if thet are standard table fieldS)
Message was edited by: Vijay Babu Dudla -
Needs help.....Please about using different classes
I don't know how to use differenet classes.
Please tell me how to write class to suit Start. This stuff me up. Please .... help me
<<My program>>
//Start
public class Start
{ private Artist[] Artists;
private Record[] records;
private Person[] Manager;
private TextMenu makeMenu = new TextMenu();
public static void main(String[] args)
Start studio = new Start();
studio.menu();
public Start()
{ //Person.Manager(ManagerName,HouseNumber,StreetNumber,PhoneNumber)
Manager = new Person[1];
Manager[0] = new Person("Yangfan",88,"Young ST",11118888);
//Artist(GroupID,ArtistName,HouseNumber,StreetNumber,PhoneNumber)
Artists = new Artist[5];
Artists[0] = new Artist(1,"Backstreet Boys",58,"Music ST",99998888);
Artists[1] = new Artist(2,"Santana",68,"Music ST",99998899);
Artists[2] = new Artist(3,"Macy Gray",78,"Music ST",55558888);
Artists[3] = new Artist(4,"Ricky Martin",88,"Music AVE",77778888);
Artists[4] = new Artist(5,"Did Rock",55,"Music Road",66667777);
//Record(RecordingID,RecordName,Artist,StartTime,FinishTime,RecordingDate,GuestArtist1,GuestArtist2)
records = new Record[6];
records[0] = new Record(1,"I want it that way",Artists[0],11,12,"05/08/2001",Artists[1],Artists[3]);
records[1] = new Record(2,"Smooth",Artists[1],11,12,"05/08/2001",Artists[1],"");
records[2] = new Record(3,"Do something",Artists[2],11,"05/08/2001",Artists[3],"");
records[3] = new Record(4,"Livin La Vida Loca",Artists[3],11,12,"05/08/2001",Artists[1],Artists[3]);
records[4] = new Record(5,"Bawitdaba",Artists[4],11,13,"05/08/2001",Artists[1],"");
records[5] = new Record(6,"The one",Artists[0],11,14,"05/08/2001",Artists[1],"");
public void menu()
{ String[] choices = {">>>List Manager Details",">>>List All Artist Names",">>>List An Artist Telephone-Number",">>>Show Details For One Recording",">>>Add A New Recording",">>>List The Recording Costs For All Artists",">>>List Artist's Reocording",">>>Exit Program"};
while (true)
{ switch (makeMenu.getChoice(choices))
{ case 1: showAllArtists();
break;
case 2: showAllRecords();
break;
case 3: System.exit(0);
break;
case 4: System.exit(0);
break;
case 5: System.exit(0);
break;
case 6: System.exit(0);
break;
case 7: System.exit(0);
break;
case 8: System.exit(0);
break;
default:
public void showAllArtists()
{ int numArtists = Artists.length;
for(int i = 0; i < numArtists; i++)
{ Artists[i].displayArtistDetails();
public void showAllRecords()
{ for (int i = 0; i < records.length; i++)
{ System.out.println();
records.printRecordDetails();
<<Assignment>>
Due - midnight, Wednesday August 22nd
This assignment will test your knowledge of Java programming using classes, encapsulation and javadoc.
The base requirements
Write a complete Java class to manage a Digital Recording Studio. The studio wants to keep a list of all Artists that use the studio and also wishes to keep track of all Recordings that have been made. An important function of the program is to calculate the time spent making a recording and charge the Artist for the time used.
You must create at least the following classes, Start, Studio, Person, Artist, Recording, Address. You may create other classes if needed as well
Start will contain main(), create one instance of a Studio and execute a Menu of commands to test your code. Studio should contain a studio name, an array of Artist and an array of Recording plus the studio manager (a Person). Each Artist should contain the name of the group and an Address. Each Person will have a name and a home address. Each recording will have a Title (usually song title), an Artist (only one), and a list of guestArtist (they are Artist�s but will not receive royalties) the number of the CD the recording is stored on (numbers are numerical and recordings are saved on CD-R), plus the recording start and finish times for the recording session (suggest you use Java Date class � refer to the API). An Address will contain, house number (integers only), a street name and a telephone number. There is no need to store city and country.
To enter a set of data for testing your program � main() should call a method in the Start class that will fill in a set of values by creating objects and filling in values by calling methods in each class. This is the ONLY method allowed to be longer than 1 page long � normally we would read the data from a file but there are no O-O principles that can be learnt with simply filling in data values. It is suggested to create say at least 4 Artist�s and 6 Recordings (at least one with 1 guest Artist and one with 2 guestArtist�s)
A menu for testing your program should be provided (it is suggested to put the Menu into a separate class as you need at least 3 menus). While other commands are possible, only the following ones will receive marks.
Menu commands needed are
List the Managers name, address and telephone number
List all Artist Names
List an Artist telephone number (a sub menu showing valid Artist�s is required)
Show all details for one Recording ( sub menu of valid Recordings will be needed and remember there can be more than one guestArtist)
Add a new Recording, user will need to be prompted for all details.
List the recording costs for all Artists � show each Artist on a separate line with their name and total amount, charge for using the studio is $1000 per hour or part thereof, example for a 1 hour and 10 minute recording the Artist will be billed for 2 hours.
List all the Recording�s one Artist has worked on (sub menu of Artists needed), the list should show whether they were the Artist or a guestArtist
Exit program
Use fixed sizes for arrays, suggest 20 is suitable for all arrays. Java can handle dynamic data structures (where the number of elements can grow or shrink), but that is beyond a first assignment.
Do NOT make ANY methods static - this defeats the Object Oriented approach and will result in ZERO marks for the entire assignment.
Data MUST be encapsulated, this means that all the data relating to an object are to be stored INSIDE an object. None of the data detail is to be globally available within your program - hence do not store Artist names in either Studio or Recordings � just store a reference instead. Do NOT create ID numbers for Artists, you should use References instead � for many students this will be the hardest part as you have to use Objects, not program in a C style to solve the problem. Note that if there are any non-private data in classes then zero will given for marks for encapsulation.
Good programming style is expected (see web page or lecture notes). In particular, you must use javadoc to generate a set of html pages for your classes. Make sure you use the special javadoc style comments in your source code. Marks will be granted for both using javadoc and also for including sensible javadoc comments on each class and each public method.
What to Hand In
Read the turnin page, basically the .java files, a readme.txt to tell the marker which file the program starts from plus the javadoc (html) files. Do NOT send .class files (if you do send these we will delete them and recompile your program), do NOT compress with gtar, tar, zip or use any other tool on your files. Turnin automatically compresses all your files into a single archive for us to mark.
The simplest way to turnin all your files is to place all files in one directory then just use the *.* wildcard to turn in all files within that one directory.
You must turnin all files that are not part of Java 1.3. In particular, you are allowed (actually encouraged) to use EasyIn or SavitchIn but should include the one you use in the files you submit. It is STRONGLY suggested that you copy all the files into another directory, test it works there by compiling and executing then turnin files from that directory. A common problem is students adding comments at the last minute then not testing if it still compiles. The assignment will be marked as submitted � no asking later for leniency because you added comments at the last minute and failed to check if it still worked.
If the tutors are unable to compile your submission, they will mark the source code but you will lose all the execution marks. Sorry, but it is your responsibility to test then hand in all files.
Comments
For CS807 students, this program should be fairly easy if it was to be programmed in C (you would use several struct). The real art here is to change over to programming objects. Data is contained in an object and is not global. This idea is essential to using Java effectively and is termed encapsulation. Instead of using function(data), you use objectName.method( ). Effectively you switch the data and functions around, the data has a method (function) attached to it, not the other way around as in C (where you have a function and send data to it).
While there will be some marks for execution, the majority of the marks will be given for how well you write your code (including comments and documentation) and for how well you used O-O principles. Programs written in a C style with most of the code in one class or using static will receive ZERO marks regardless of how well they work.
You are responsible for checking your turnin by reading the messages turnin responds with. Failure to read these messages will not be an acceptable excuse for submitting an incorrect assignment. About 2% of assignments sent to turnin are unreadable (usually empty) and obtain 0.
Late submissions
Late submissions will only be accepted with valid reasons for being late. All requests for assignment extensions must be made via email to the lecturer. Replies for acceptance or refusal will made by email. Instant replies are unrealistic (there is usually a flood of queries into my mail box around assignment due dates) and the best advice is to ask at least 4 days in advance so that you will have a reasonable chance of getting a timely reply and allow yourself enough time to submit something on time if the extension is not granted.
ALL late submissions will be marked LAST and will NOT be sent to tutors for marking until all other assignments have been marked. As an example, if you submit late and your assignment is not yet marked by the time assignment 2 is due then it will be pushed to the end of the marking pile as the assignments that were submitted on time for assignment 2 will take priority.
If you make a second submission after the submission date, only the first submission will be marked. We will not mark assignments twice! You can update your submission BEFORE the submission date if you need to - this will just overwrite the first submission. The latest time for a late submission is 5pm on the Wednesday after the due date. This is because, either a solution will be handed out at that lecture or details of the assignment will be discussed at the lecture. I cannot accept any assignment submissions after that time for any reason at all including medical or other valid reasons. For those who are given permission to be later than the maximum submission time � a different assignment will be handed out. Remember, if you decide to submit late you are VERY UNLIKELY to receive feedback on your assignments during semester.
Assignments will be removed from turnin and archived elsewhere then forwarded to tutors for marking on the morning after the assignment is due. A different tutor will mark each of your assignments � do not expect the tutor you see at the tutorials to be your marker.
Marks will be returned via email to your computer science yallara account � ideally within 2 weeks. I will send marks out when I receive them so do not send email asking where your marks are just because a friend has theirs. If you want your email forwarded to an external account, then place a valid .forward file into your yallara account. The Help Desk on level 10 can assist you in setting this up if you do not know how to do it.I have seen other people who have blatantly asked for
other people to do their homework for them, but you
are the first person I've seen to actually cut and
paste the entire assignment as it was handed to you.
Amazing.
Well, unlike some of the people you're talking about, it seems like zyangfan did at least take a stab at it himself, and does have a question that is somewhat more sepcific that "please do this homework for me."
Zyangfan,
marendoj is right, though. Posting the entire assignment is kind of tacky. If you want to post some of it to show us what you're trying to do, please trim it down to the essential points. We don't need to see all the instructor's policies and such.
Anyway, let me see if I understand what you're asking. You said that you know how to write the code, but only by putting it all in one class, is that right? What part about using separate classes do you not understand? Do you not know how to make code in one class aware that the other class exists? Do you not know how code in class A can call a method in class B?
Please be a bit more specifice about what you don't understand. And at least try using multiple classes, then when you can't figure out why something doesn't work, explain what you did, and what you think should have happened, and what did happen instead.
To get you started on the basics (and this should have been covered in your course), you write the code for two classes just like for one class. That is, for class A, you create a file A.java and compile it to A.class. For class B, you create a file B.java and compile it to B.class. Given how rudimentary you question is, we'll skip packages for now. Just put all your class files in the same directory, and don't declare packages in the .java files.
To call a method in class B from code that's in class A, you'll need an object of class B. You instantiate a B, and then call its methods.
public class B {
int count;
public B() { // constructor
public void increment() {
count++;
public class A {
public static void main(String args[]) {
B b = new B();
b.increment();
}Is this what you were asking? -
Location based reminders not working in IOS8 on iphone 5s, please help?
Location based reminders are not working when using Siri since upgrading to IOS8. Asking Siri to "remind me when I get home" also turns off reminders in Location Services. Please help
I have the same issue with Siri turning off the location setting for reminders. In fact my location based reminders do not work at all. IPhone 5s, ios 8.1, upgraded to 8.1.1 and that did not fix these issues.
SEems like Apple does not test the location setting every other upgrade to iOS. They break it, then fix it then break it etc... -
"Adding Location Based Services to Your Application" help me
Hi all
In the OBE tutorial " Adding Location Based Services to Your Application" has:
"Enter Wireless for Library Name. Set the classpath to include the wireless.jar from your installation. For example, C:\midtier_pw\wireless\lib\wireless.jar. Click OK.
The new library should now appear in your Selected Libraries list. Click OK to close the Properties window. "
But i don't know where the Wireless.jar file is. Please tell me
thanks
[email protected]help me to perform adding WEB Services as described bellow:
Hello,
It depends a Little bit on the used Visual Studio Version. Basically do a right-mouse click on "References" and select
The next steps are a Little bit hidden & confusing: In the next Dialog click on "Advanced..", then add "Web reference" and here you can enter the URL for SSRS SOAP, click on the green arrow and the WSDL data will be retrieved &
shown in the Dialog:
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Just curious on the location of the user agent string for Firefox 4. I don't want to edit or change it, I just want to view it. In previous versions of Firefox, it was in the Help-About menu. It doesn't appear to be located in this spot for Firefox 4.
Any assistance would be greatly appreciated.
Thanks!'''about:support''' = Help > Troubleshooting Information
-
Will Location based reminders work on ios 6 for the IPad 3 I keep getting a message that siri can't do location based reminders on this device any help please
Have they called you back? I have opened a similar support case too today, they does not know what to do and they will speak with some engineer, but now that I have found this post...I think we just have to wait for a new minor release...anyway our devices (2 and the new if cellular) must be supported http://support.apple.com/kb/HT4970
-
Location based wifi not working as expected
I would expect that location based wifi would either turn wifi off if not in a place with saved networks, or turn wifi on if arriving in a place with saved networks, but it does neither. I have tested this by turning wifi on when at home, then periodically checking status in places with no networks saved or open, and it's still on, and also by turning wifi off when away from home, then checking at home to see if it's turned on, and it isn't. So doesn't seem to be working either way. I have stamina mode active, and some people have said that location based wifi won't work with this.but most say works just fine, and would have expected Sony to say if different power saving options were incompatible. Always have location sensing GPS turned on. Often have mobile data off. Some have said that this is necessary for location based wifi to work, but others not, and to my way of thinking, location based wifi should turn wifi off whenever out of range of saved network, and add long as phone has some way of knowing where it is to wake up wifi, then it shouldn't matter which location modality it uses. Can anyone shed any light on this? Google's not being very helpful. Thanks
Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
You do need to have data turned on and as such you must also have Stamina mode turned off for this to work sorry.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Location based WiFi not working
When I'm not at home I keep my xperia WiFi turned off. When I come home it doesn't turn automatically on even if I got my home WiFi registered on my phone! I always have to do that manually. Of course I have the option ON in "location based WiFi". Could somebody help me, please?
You may need to perform a software repair using PC companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
IOS8 location based apps crashing
Anyone seeing apps that are location based crashing in iOS 8.0.2? For example, Foursquare crashes right after a message about allowing access to you location pops up. Also, clicking on a location of a photo in Instagram crashes. Weather apps as well. Deleting/rebooting/reinstalling apps have not helped.
Will wiping the iOS and reinstalling it be the key?same problem here. Fresh iPhone 6 Plus right out of the box, went to disable frequeant locations and it crashes. Restored phone in DFU mode and retried and exact same thing happened. I am assuming this is an issue with iOS 8.0.2 or maybe a hardware Issue
-
Location Based Push Notifications in notification hub in wp8
I'm basically trying to replicate what's being demonstrated at http://channel9.msdn.com/Shows/Cloud+Cover/Episode-118-Location-based-Push-Notifications-with-Windows-Azure-Notification-Hubs.
It's a good demo by Elio Damaggio, but it doesn't cover all of the code that he's used. I'd really like the sample code for this demonstration but it doesn't appear to be available, and I can't find any tutorials or code examples for using location
based push notifications. Just wondering if anyone can knows where I can find a tutorial or code sample?Hi Rob,
Thanks for posing!
Sorry to said, the code sample didn't publish for us currently. However, I suggest you could follow Elio's ideas to code. Firstly ,he create Notification Hubs on azure and implement it in his windows phone 8 application ( http://www.windowsazure.com/en-us/documentation/articles/notification-hubs-windows-phone-get-started/)
. Secondly, he used the geolocator class (
http://msdn.microsoft.com/en-us/library/windows/apps/windows.devices.geolocation.geolocator ) in his project to get current location.
And then he register Notification Hubs and convey the current location variables to Bing API. I think you could pay attention to how to use Notification Hubs tags and geolocator class in this code sample.
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
iPad2 with IOS 8.1.2 located with me in Eastern Time Zone city but settings under General reflects Central Time Zone(Chicago). All location based Apps are reflecting a Central Time Zone city, one that I have never visited. I did an erase and restore of a backup prior to this issue but it was not resolved. What do I do?
I am having a similar issue. I moved about 10-15 miles. Any app, such as Maps, a Weather, etc, that use location keep showing my current location as my old address. I'm interested in hearing the solution to your problem.
-
One of three user accounts on the same computer appears to not be updating to 8.0.1 correctly. One admin and one none admin user account says it is up-to-date. The other non-admin user account, under Help About Firefox says apply update, but won't.
As long as you installed MS Office into its default location (the top level /Applications folder) it will be available to all user accounts on the Mac.
As far as licensing is concerned you only have to enter the license code once, which you should do right after installing MS Office, in the same admin account you installed it from, by opening any one of the MS Office applications. There is no additional licensing required for additional user accounts on the same Mac.
Each user account is able to run the Office apps. The only thing you will have to do is go through an initial setup screen in each user account (but this setup does NOT involve entering any additional license codes).
You may have problems if you installed MS Office in a particular user account (i.e. NOT in the top level /Applications folder). -
Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec
I have created a BPEL process in which i have used DB Adapter when i try to deploy the soa suite coposite i am getting the following error.
[09:36:10 PM] Error deploying archive sca_TicketBooking_rev1.0.jar to partition "default" on server soa_server1 [http://utl-7c8735e613f:8001]
[09:36:10 PM] HTTP error code returned [500]
[09:36:10 PM] Error message from server:
There was an error deploying the composite on soa_server1: [JCABinding] [TicketBooking.TicketBooking/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec.
[09:36:10 PM] Check server log for more details.
[09:36:10 PM] Error deploying archive sca_TicketBooking_rev1.0.jar to partition "default" on server soa_server1 [http://utl-7c8735e613f:8001]
[09:36:10 PM] #### Deployment incomplete. ####
[09:36:10 PM] Error deploying archive file:/D:/Personal/OracleWork/RnDProjects/TicketBooking/TicketBooking/deploy/sca_TicketBooking_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I already created the data source and JNDI Name in the DBAdapter but still getting the error while deploying the application.
One mistake that i think i have made after creating the data source now the DBAdapter.rar file taking the path as follows.
Source Path: C:\ Oracle\ Middleware\ Oracle_SOA1\ soa\ connectors\ was\ DbAdapter. rar
Deployment Plan: C:\ Oracle\ Middleware\ Oracle_SOA1\ soa\ connectors\ was\ Plan. xml
initially the path was as follows:
Source Path: C:\ Oracle\ Middleware\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
Deployment Plan: C:\ Oracle\ Middleware\ Oracle_SOA1\ soa\ connectors\ Plan. xml
Please help me i have googled a lot but can't find the answer anywhere.
Thanks in advanceMate ,
Just check the health status and state of DB Adapter in the deployments of WLAdminConsole.
If its inactive , redeploy and update it ,also make sure its targeted to the right server.
Maybe you are looking for
-
How can I see my 2 ITunes account on my apple TV?
Hello, I have two ITunes accounts (for some reason that I can't remember at one point it was modified) and I have purchases under my A account and purchases under my B account (both under the same credit card information and email, just different ID)
-
How can I create a white border around figures that are in an image? (CS 6; examples+image included)
Hi, I have CS6 and am wondering how to create a white ("comic style"?) border around figures in an image, as in the examples below. I don't wish to include the black shadow of the border, just the white part. Examples: Here's the image I'd like to al
-
How do i save a ring tone to my iPhone ring tones, how do i save a ring tone to my iPhone ring tones
I have emailed an mp3 file to myself and can open the attachment on my iphone. It plays okay, but now I want to save it as a ring tone option on my iPhone 5s. Any suggestions on how to do this??? D
-
Hi, we're planning to update our existing Adobe Reader 9 Installations to Version XI. We also have some Adobe Acrobat 9 Versions in use. Is it recommended to update also this version to the same version or are there no compatibility issues if the Rea
-
VAT reconciliation report - document date variable
Hello! I am trying to have document date in VAT reconciliation report instead of posting date. I do not have system variable value for this. Have tried to search through PLD_Vars Excel document, but without any luck... Any help would be appreciated T