Help and opinions - Memory in 15" PB 1.67ghz DDR2

I just purchased an extra 1gb stick of Crucial DDR2-667-PC2-5300 ram from Newegg. Figured since Crucial gave it their blessing for the DDR2 version of the PB then I could always use it in a MBP when I buy one if they are still using it at that time. Anyway, it is installed and seems to be working fine, the PB is ticking along perceptibly faster and no lockups or freezes.
The main problem is the PB doesn't know what RAM is installed. It reports it as PC2-3200 instead of PC2-5300. As far as I know 3200 shouldn't even run in this PB. I called Crucial and they said in their opinion this is not right. Either the RAM is bad (maybe miss-labeled?) or the PB is not able to detect it correctly.
Anyway, anyone else ever had this problem? Anyone else with their PB reporting the wrong type of RAM. I drove all the way to my local Apple Store and by the time I got there the Genius Bar was booked up for the night so no help there.
Any help and opinions much appreciated.
15" 1.67ghz G4 DL Powerbook, 12" 1.33ghz G4 Powerbook, 20" 1.8ghz G5 iMac   Mac OS X (10.4.6)  

OK, FYI anyone who is curious. I took my PB down to the local Applestore and a tech helped me try and figure out what is up. We used an official Apple PC-2 5300 chip, and an official PC2-4200 (the same as what comes with the 15" PB-DDR2 version.
The Apple supplied ram were both Micron, same as the Crucial I had purchased, the tech said that was the best that I could use.
With the Apple supplied DDR2-5300, the system profiler reported the same as with my chip, that the ram was PC2-3200. When we swapped out for the PC2-4200, the profiler read it as what it was labeled, PC2-4200.
The tech had no explanation. He doubted that the chip was being clocked down that slow as it would be below the spec of what the PB needed. His guess was that something in the system profiler was glitchy and not displaying the specs correctly. He did offer that while I could exchange the ram for the PC2-4200 if I wanted it to be reported as such by the profiler, if it was himself he would keep what I had - especially if I intended to buy a MBP or other new Mac that could use the ram in the future.
Since my PB is running flawlessly with this chip installed I think that is what I am going to do, keep it as is.
15" 1.67ghz G4 DL Powerbook, 12" 1.33ghz G4 Powerbook, 20" 1.8ghz G5 iMac   Mac OS X (10.4.6)  

Similar Messages

  • Can you please take a look at my TM Buddy log and opine on what the problem is?

    Pondini,
    Can you please take a look at my TM Buddy log and opine on what the problem is?  I'm stuck in the "Preparing Backup" phase for what must be hours now.  My last successful backup was this morning at 7:16 am.  I did do a series of Software Update this morning, one of which, a security update I believe, required a restart.
    I'm confused as to what the issue is, and how to get everything back to "it just works".
    Many thanks in advance.
    Starting standard backup
    Backing up to: /Volumes/JDub's Drop Zone/Backups.backupdb
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski’s iMac/2013-05-30-002104
    Event store UUIDs don't match for volume: Area 420
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (5) getxattr for key:com.apple.backupd.SnapshotSt

    Time Machine can't read some data it needs from your backups (each of those date-stamps is one of your backups). 
    That's usually a problem with the drive itself, but could be the directory on it. First be sure all plugs are snug and secure, then see if you can repair it, per #A5 in Time Machine - Troubleshooting. 
    If that doesn't help, post back with the results.  Also either tell us what kind of Mac you have, what version of OSX you're running, or post that to your Profile, so it's accessible.  
    This is unrelated to the original post here, so I'm going to ask the Hosts to split it off into a new thread.  Since you've posted in the Lion forum, I'll assume that's what you're running.  You should get a notice from them

  • HP Live Photo FAQ, Help, and Support

    HP LIVE PHOTO
    HP Live Photo app - available on iOS and Android devices
    Make your photos come to life with HP Live Photo!  HP Live Photo is a free, fun, and easy app for iOS and Android that lets you share your experiences with friends and family by creating photos that launch short personal videos on a smartphone or tablet.  
    Share your Live Photos with friends and family by printing, ordering prints from Snapfish (US only), and via Facebook or email. 
    For more information on HP Live Photo you can:
     1. Watch this short video
     2.  visit the HP Live Photo app page.
    To install the app:
    iOS: App Store link  Look in the Apple App Store for HP Live Photo.  Available in English only at this time.    Supports iOS 6.0 and above.
    The app is designed for the iPhone, and can be run on the iPad2 and above and iPad Mini in 2X mode, and on the iPod Touch 5th generation.   If you want to install the app on your iPad2 or above, do not filter for apps that are designed for the iPad in the app store. 
    Android: Google Play Store link.  Available in English only at this time.  Supported at this time only on the following devices:
    HTC One
    HTC OneX
    Nexus 4
    Samsung Galaxy S2
    Samsung Galaxy S3
    Samsung Galazy S3 Mini
    Samsung Galaxy S4
    Samsung Galazy S4 Mini
    Samsung Galaxy Nexus
    Samsung Galaxy NoteII
    Sony Experia Z
    You'll find the following Help and Support information below: 
    FAQ - Frequently Asked Questions
    Help Printing Live Photos
    Troubleshooting Help for Creating, Sharing, and Viewing Live Photos
    How to get more Support 
     FAQ
    Can I see an example of what the app does?
    Yes.  Watch this short video, and the HP Live Photo also app includes a video and an example Live Photo you can print and view from the Live Photo app.  Go to Settings and scroll down to the Tools section and select “Print a Sample” to print the sample Live Photo and then view it with the app. 
    If I have a question about my Snapfish Live Photo order, who should I talk to? (US only)
    When you place a Snapfish order from the Live Photo app, you will receive an order confirmation from Snapfish to your email address.  Review that email to confirm your order and contact Snapfish if your order appears to be late or does not arrive, or you have questions about the quantities you receive after your order arrives.   Check your spam folder if you don't see the Snapfish order confirmation email in your inbox.  If you need assistance from Snapfish and cannot find your confirmation email, here is the US Snapfish Help and Support page.   
    What iOS devices support Live Photo?
    The iPhone, iPad2 and later, and iPad Mini, and iPod Touch 5th generation on iOS 6.0 and above.   The app runs in 2X mode on iPad devices.  Currently, HP Live Photo is supported in the US in English only.  
    Do I need an iOS or Android device to both create and view Live Photos?
    Yes.  Currently Live Photos may only be created and viewed on iOS or Android devices at this time.
    Can I use any video in Live Photo?
    You may use any video recorded on your mobile device using the video function, up to 45 seconds in length.  If the video is longer than 45s, the HP Live Photo app will allow you to select a 45 second or less segment from the video.
    Where are the Live Photo videos saved when I create a Live Photo?
    The videos for your Live Photos are saved over the internet to the cloud.  The original video on your device is not affected or modified in any way.  HP Live Photo is not a video backup solution, so be sure to save images and videos using your own storage solutions.   The live photo videos are not saved to your Facebook account. 
    When I share a Live Photo via email or Facebook is the video included in the email or post?
    No.  Only the Live Photo is included in the email or Facebook post.  The video is only accessed from the cloud when the HP Live Photo app is used to scan a Live Photo. 
    If I print a Live Photo to give to family/friends, how will the recipient know how to view it?
    The HP Live Photo app allows you to choose between printing just the Live Photo itself, or printing the Live Photo and a set of simple instructions for your recipient on 4x6 or 5x7 photo paper.  The instructions explain how to install the HP Live Photo app and view the Live Photo.
    Can I share my Live Photos with anyone? 
    Yes.  You can share with any friends/family using a live photo nametag.  Even easier, if you log into Facebook from the Live Photo app your Facebook friends are automatically enabled to view any live photos you share with them without having to enter your Live Photo nametag. 
    What is a Live Photo Nametag? 
    A Live Photo nametag allows you to share live photos with friends and family who are not a Facebook friend.   The Live Photo app will prompt you to create your own custom nametag. This nametag allows Live Photo users who are not your Facebook friends to view  your live photos. 
    Your nametag is printed on the bottom right corner of all your live photos.  When you share your live photo with someone who is not a Facebook friend, they can simply enter your nametag in the nametag field on the View screen of the Live Photo app, and then view any of your live photos you share with them.  This is a one-time operation - once your friend or family member enters your live photo nametag they will be able to view any of your live photos.  Anyone who is a Facebook friends can view your live photos w/out having to enter your nametag.  
    How do I print a Live Photo from an iOS device?
    You can print Live Photos from the Live Photo app on your iOS device in the same way you print other photos on iOS, using the built-in iOS Airprint feature. Airprint supports a range of printers from HP and other companies.  If you need help with Airprint, follow the steps in “How do I send a print job using Apple AirPrint?” section in these instructions. 
    How do I print a Live Photo from an Android device?
    Printing from Android devices is supported via the HP ePrint app, and is currently only enabled for HP printers. (See the next section for printing to non-HP printers or printers not supported by the HP ePrint app.)  The ePrint app must be installed separately from the Live Photo app, and supports all web-connected HP printers released in the past several years and many legacy HP printers.  If the HP ePrint app is not installed on your Android device you will be prompted to install it when you select the Print option in the Live Photo app.  For more information see the HP ePrint app in the Google Play store.
    Note on HP ePrint app Activation: After the HP ePrint app completes installing you will be prompted by the HP ePrint app to Activate it.  You do not have to complete the “Activation” step in the HP ePrint app to print to your local wi-fi connected HP printers.  HP ePrint app Activation is only required if you wish to print to HP web-connected printers on your HP Connected or HP ePrintCenter account, over an internet connection.
    Once the HP ePrint app is installed, when you select Print from the Live Photo app the HP ePrint app will be automatically launched w/the live photo displayed and ready to print.  All you have to do is select an HP printer on your wi-fi network, ensure you have photo paper inserted, and hit print.
    Can I print from my Android device to non-HP printers and HP printers that the ePrint app does not support?
    Yes.  There are some third-party printing apps available for Android devices in the Google Play store (one example is Printershare).  If your HP printer is not supported by the HP ePrint app, or if your HP printer compatible is not compatible with the HP ePrint app, you may be able to use a third-party print app to print your HP live photos.
    Send the photo to yourself via the Share via email option from Live Photo.  Then open the email on your phone and tap on the photo when it displays after downloading. Select the Android Menu option and choose Share. Your print app should appear on the Share list.  Select the print app and complete your print as you normally do using that app.
    Can I print Live Photos from my computer?
    Yes.  Simply share your photo via email from the Live Photo app to your own email address and then open the email and print the live photo as you normally do from your computer. You can print live photos from your computer to any printer you have attached to it that supports photo printing.
    Can I print Live Photos on plain paper?
    Always print Live Photos on photo paper to provide the necessary color, saturation, and depth for the best Live Photo experience.  You may have success printing on plain paper, but results will be much less predictable.
    Do I need a Facebook account to use HP Live Photo?
    Viewing: No. A Facebook account is not required to view live photos using the Live Photo app. 
    Creating: No.  A Facebook account is not required to create Live Photos.  You can create and share them using your Live Photo Nametag.  However:  If you create live photos without logging into Facebook, we cannot make your live photos available to you in the Live Photo app on other devices.  Any live photos you create on a device using just a Live Photo nametag will be added to your Live Photo gallery and available on other devices if you sign into the app using Facebook. 
    Do I need an internet connection to use this app? 
    Yes, HP Live photo requires an internet connection for launch/use. 
    I played the introduction video in the app but why is there no sound – what’s wrong?
    Make sure that you have sound enabled on your iOS device...if you are set to virbrate mode you will not hear audio with the video. 
    How can I provide feedback on Live Photo features that I’d like added or changed?
    In the HP Live Photo app, select Settings and scroll down to the Send Feedback option.  We would love to hear from you!  Note that this option is for feedback and is not monitored for support questions.  For support questions see the
    Printing Live Photos, Troubleshooting, and Support sections below.
    I am having an issue with the HP Live Photo app – where can I get help? 
    See the Printing Live Photos and Troubleshooting sections below.  If you can’t find what you need and would like to contact HP Live Photo support, see the Support section below. 
    PRINTING LIVE PHOTOS 
    Always print Live Photos on photo paper to provide the necessary color, saturation, and depth for the best Live Photo experience. 
    You can print from your iOS device on 4x6 or 5x7 photo paper using Airprint if you have an Airprint compatible printer.
    You can print from your Android device on 4x6 or 5x7 photo paper via the HP ePrint app if you have an HP wireless/Ethernet connected printer.
    Printing Live Photos shared via email on an iPhone/iPad using Airprint:   
    Long-press on the image in the email and select “Save Image” from the pop-up list of options and select the Save option.
    Go to your Camera Roll and open the image.
    Ensure you have 4x6 or 5x7 photo paper in your printer’s photo paper tray, or main tray if you do not have a separate photo paper tray, select the Action icon and choose the Print option. 
    If you need help with Airprint, follow the steps in “How do I send a print job using Apple AirPrint?” section in these instructions  
    More information on Airprint:
    - HP Airprint support forum discussion thread: Click here. 
    - All Airprint enabled printers:  http://support.apple.com/kb/HT4356
    Printing Live Photos shared via email on an Android device (requires HP printer):
    Tap on the image in the email to open the image.
    While viewing the image, select Menu>Share
    Select the HP ePrint app as the share target, or another print app that you prefer to use if you have one installed. If you select another print app, complete the print as you normally do.
    If you select the HP ePrint app it will open displaying the image – select Print in the HP ePrint app to print the image. Ensure you have 4x6 or 5x7 photo paper in your printer’s photo paper tray, or main tray if you do not have a separate photo paper tray, and select either 4x6 or 5x7 print size in the HP ePrint app settings.
    More information on the HP ePrint mobile app.
    HP ePrint mobile app FAQs:  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&dlc=en&docname=c01923321
    Printing Live Photos shared via email on PC and Mac:
    You can also use the Email option to send a Live Photo to yourself, open the email on your computer and save and print the photo as you normally print photos on your computer. 
    On a PC, right-click on the photo in the email and select the Save option.  
    On a Mac, see this information. 
    If you need additional help printing photos from your PC, Click here.
    Printing Live Photos shared via Facebook:
    It’s usually easiest to save the photo from Facebook and then print it on your computer or device.
    Computer: Select the photo and select “Options>Download” to save the photo to your computer. 
    Mobile: Long-press on the photo and select “Save Photo” to save the photo to your device.
    After saving the Live Photo print it as you normally print on your computer or device.  
    Printing Photos Directly from Facebook on Your Computer:
    You may also want to try the HP Facebook Photo and Album printing option to print live photos from Facebook shares. 
    However, it may be simpler to save and print the photo from your computer or device using a process that you are more familiar with.
    https://apps.facebook.com/hpprint/
    TROUBLESHOOTING
    Create:
    Can I change the images that the app pulled from the video for the Live Photo?
    It is not possible to directly select a specific frame of the video to print as the Live Photo.  You can try the refresh button in the upper-right corner of the “Choose Image” screen to re-scan your video.
    What can I do if the HP Live Photo app is unable to find an image in my video for the Live Photo?
    The most likely reason for not finding an appropriate image to print for the Live Photo is that the content of the video does not provide enough contrast.  For example, a video of a white dog walking on the sidewalk, or black dog walking on asphalt.  The best way to try to resolve this issue is to shoot the video with more lighting to increase the contrast.  You can also try to include a few “still shots” in the video where camera and subject movement is minimized. 
    What if I don’t want to share the entire video?
    After you select your video, you can use standard iOS video trim functions within the HP Live Photo app to choose your desired begin and end points. 
    What if my video is longer than 45 seconds?
    The HP Live Photo app will display the video trim controls automatically with a 45 second segment selected so you can choose what portion of the video to include.
    Can I use a video from another source?
    HP Live Photo currently only supports videos created on your iOS device.
    It’s taking a very long time to save my Live Photo project.  What can I do to speed it up?
    Saving the project requires uploading both the video clip and the photo, and completing several tasks in the cloud to link the Live Photo to the video. Depending on the length of your video and the speed of your internet upload connection (which can vary significantly over time), this can take several minutes. 
    If you are on Wi-Fi and the save is taking more than five minutes or not completing, try changing to 3G or 4G, which usually have faster upload speeds than home or public Wi-Fi connections.  (Data charges may apply.)  You can also try using a shorter video clip.   (If you are interested, you can use services like www.speedtest.net to test your Wi-Fi and 3G/4G upload speeds.)
    How do I view or share Live Photos I’ve already created?
    Select the Live Photos option (icon looks like a small stack of photos) in the Live Photo app to view the Live Photos you have created.  Select one of them to view the photo and choose a print or share option. 
    How do I delete a Live Photo from my list of saved Live Photos?
    iOS:  Go to the Live Photo tab and slide your finger left-to-right on the Live Photo you want to delete.  A “Delete” button will appear – select it to delete the photo.
    Android: Select the Live Photo icon (at the top of the Live Photo app, looks like a stack of photos) to view your live photos.  Long press on a live photo a context menu will appear with Delete and Share options.  Select the Delete option.
    Share
    I’m having problems printing a Live Photo that was shared to me.   
    See the Printing Live Photos section above for general information and assistance with printing HP Live Photos.
    Can I use the app to view a Live Photo on my computer screen?
    Yes.  If you share the Live Photo via email or Facebook, recipients can use the HP Live Photo app to view the Live Photo on screen and see the video.  Results can be affected by the monitor display resolution and type, as well as ambient lighting.  
    My friend doesn’t have an iOS or Android device.  Can I share my Live Photo with her?
    At this time an iOS or Android device is required to view the videos associated with your Live Photos. 
    I just need the viewing instruction sheet – how can I print that?
    Go into app Settings and scroll down and select the “Print Instructions” option.  If you prefer not to print the instructions on 4x6 or 5x7 media, remove photo media from the photo tray before you send the print. 
    View:
    I have a Live Photo that does not play when I view it through the HP Live Photo app.  What’s wrong?
    Below are some reasons why this could occur:
    The photo is not an HP Live Photo.  Look for the small blue icon of a bird in the lower-right corner of the photo to confirm it is a Live Photo.
    The person who created the Live Photo must be either one of your Facebook friends, or you must connect to them by entering their nametag (printed on the bottom-right of the live photo) in the View screen in the Live Photo app.  
    The Live Photo needs to be printed on photo paper for best results.
    Ensure sufficient light is available for viewing, and minimize any glare or shadows on the photo.
    The creator of the Live Photo may have deleted the Live Photo project from their app.  Contact them to confirm it is still available.
    An internet connection that is too slow/unstable.
    Can I view Live Photos with other augmented reality apps?
    No.  HP Live Photo requires the HP Live Photo app to view the images and display the video.
    SUPPORT
    If you are unable to find an answer to your question in the FAQ, Printing Live Photos, and Troubleshooting sections above, you can get support via email for the HP Live Photo application at the following email address:
    [email protected]
    To ensure a quick resolution of your support question, please provide:
    A clear subject line - e.g., “Live Photo – printing problem”
    A complete description of your problem – what you are trying to do and what is going wrong.
    What iOS mobile device you are using
    Your printer make/model
    Note that we do not have the necessary information to provide support for photo printing on non-HP printers. 
    I am an HP employee.

    Connybelle wrote:
    My HP Photosmart 5514 is set up on wireless.  It will not let me print a picture from my computer.  No matter what I do, it tells me to insert a memory card.  I want to print what is in my pictures on the computer.  Any ideas?
    If you're trying to print from your computer to your printer via wireless, you have a basic printing question...You can get help for those types of questions in this forum:
    http://h30434.www3.hp.com/t5/Printing-Issues-Troub​leshooting/bd-p/PostPrint
    I am an HP employee.

  • My Mid 2007 24" iMac has been a bit laggy on Yosemite and getting worse every day, so I went to the Apple Support pages on Apples website looking for help and thought I'd found some. This is what I did and it made everything 100 times worse :(

    So here is what I found and what I did to try to alleviate the RAM eating upgrade named Yosemite. This guy has helped quite a few people, you can read all the comments and I gave it several tries this morning.
    Oct 23, 2014 10:59 AM
    I post this hoping to help those users who, like me, are experiencing high CPU usage and massive memory leaking with OS X core services and apps, leading to slow performance and battery drain.
    I've tried everything mentioned, but found the right combination of steps to follow. I've tried this with seven different Apple computers, including mine, and has worked well so far. I applied this method yesterday to give these process a 24 hour window to fail again, so far everything good.
    First step: disconnect any external or secondary monitors, if any is present. The video memory allocation leak can also happen if you have a system with an integrated card, like Intel, with no external monitors attached.
    Second step: Shut down your machine and enter Safe Mode (press shift once you turn on your computer again, more info below). Once you're there, fix your disk permissions.
    Guide of how to access Safe Mode: OS X: What is Safe Boot, Safe Mode?
    Third step: From Safe Mode turn off your machine again and reset your System Management Controller (SMC). There are different methods, depending on machine, to do this. To know what method applies to yours read the following guide.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Fourth step: Once your machine completes a full boot after resetting the SMC turn it off again and reset your PRAM (THIS IS THE MOST IMPORTANT STEP, BUT THE PREVIOUS ONES ARE ESSENTIAL FOR THIS ONE TO WORK). The PRAM stores small bits of data that indicate our Apple computer how to interact with the devices connected to it, including monitors and video cards. It also affects software.
    To reset it you should hold the OPTION, COMMAND, P and R keys in your keyboard immediately after turning on your machine again.You'll hear the start up chime, continue pressing the keys until the machine boots and the chime starts A SECOND TIME, then release. IF YOUR YOSEMITE INSTALLATION LOCKS UP AT A BLACK SCREEN AFTER THIS, DONT PANIC! It's normal, just turn off your computer and let it boot again.
    More info about PRAM: OS X Mavericks: Reset your computer’s PRAM
    Voila, reconnect your external displays and enjoy your system.
    Message was edited by: Luis_Mercado
    MacBook Air, OS X Yosemite (10.10)
    So here is my EtreCheck report that is a bit above my head but anything in red isn't good I'm sure. I'd really appreciate some friendly advice
    EtreCheck version: 2.0.11 (98)
    Report generated  at
    Hardware Information: ℹ️
      iMac (24-inch Mid 2007) (Verified)
      iMac - model: iMac7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      6 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR2 SDRAM 667 MHz ok
      BANK 1/DIMM1
      2 GB DDR2 SDRAM 667 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI,RadeonHD2600 - VRAM: 256 MB
      iMac 1920 x 1200
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:34:25
    Disk Information: ℹ️
      WDC WD3200AAJS-40RYA0 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Data (disk0s2) /  [Startup]: 319.21 GB (230.04 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
      VIA Labs, Inc. USB2.0 Hub
      Generic USB Storage
      Western Digital My Passport 0824 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      Passport Slim (disk2s2) /Volumes/Passport Slim : 2.00 TB (1.62 TB free)
      VIA Labs, Inc. USB2.0 Hub
      Apple Inc. Built-in iSight
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      WD Passport III 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      EFI (disk1s1) <not mounted> : 210 MB
      Passport (disk1s2) /Volumes/Passport : 499.76 GB (370.05 GB free)
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Extensions
      [not loaded] com.lge.driver.LGAndroidmdmcontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidmdmdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndiscontrol (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidndisdata (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidrndis (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidserial (4.15 - SDK 10.10) Support
      [not loaded] com.lge.driver.LGAndroidusbbus (4.15 - SDK 10.10) Support
      /System/Library/Extensions
      [not loaded] com.devguru.driver.SamsungComposite (1.4.26 - SDK 10.6) Support
      [not loaded] com.markspace.iokit.IOMissingSyncMassStorage (199) Support
      [not loaded] com.markspace.missingsync.palmos.classicseize (1) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboard (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftMouse (8.2) Support
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
      [loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.1394HP (1.0.5) Support
      [loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
      [not loaded] com.wdc.driver.USBHP (1.0.1) Support
      /System/Library/Extensions/MicrosoftKeyboard.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftKeyboardBluetooth (6.3) Support
      [not loaded] com.microsoft.driver.MicrosoftKeyboardUSB (6.3) Support
      /System/Library/Extensions/MicrosoftMouse.kext/Contents/PlugIns
      [not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (8.2) Support
      [not loaded] com.microsoft.driver.MicrosoftMouseUSB (8.2) Support
      /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
      [not loaded] com.devguru.driver.SamsungACMControl (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungACMData (1.4.26 - SDK 10.6) Support
      [not loaded] com.devguru.driver.SamsungMTP (1.4.26 - SDK 10.5) Support
      [not loaded] com.devguru.driver.SamsungSerial (1.4.26 - SDK 10.6) Support
    Startup Items: ℹ️
      Cocktail: Path: /Library/StartupItems/Cocktail
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.security.cloudkeychainproxy.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.softwareupdated.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.hp.help.tocgenerator.plist Support
      [not loaded] com.maintain.LogOut.plist Support
      [loaded] com.maintain.PurgeInactiveMemory.plist Support
      [not loaded] com.maintain.Restart.plist Support
      [not loaded] com.maintain.ShutDown.plist Support
      [not loaded] com.maintain.Sleep.plist Support
      [running] com.maintain.SystemEvents.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [invalid?] com.tvmobili.artwork.plist Support
      [running] com.wdc.raidmanagerstatusmenu.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.bjango.istatserver.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [loaded] com.hp.lightscribe.plist Support
      [loaded] com.maintain.CocktailScheduler.plist Support
      [loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.tvmobili.tvmobilisvcd.plist Support
      [running] com.wdc.WDRAIDDriveService.plist Support
      [loaded] com.westerndigital.WD-Drive-Manager-Installer.plist Support
      [loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.maintain.ShowUserLibraryDirectory.plist Support
      [loaded] uk.co.markallan.clamxav.freshclam.plist Support
    User Login Items: ℹ️
      Macs Fan Control Application (/Applications/Macs Fan Control.app)
      Solar Service Application (/Users/[redacted]/Library/Application Support/Logitech/SolarService/Solar Service.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
      WD Quick View UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 2.0.2f2 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.2.4 Support
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      RealPlayer Plugin: Version: Unknown
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 1.4 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      AdobePDFViewer: Version: 9.5.5 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Microsoft Mouse  Support
      MusicManager  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Data: Disk size: 319.21 GB Disk used: 89.17 GB
      Destinations:
      Passport [Local]
      Total size: 499.76 GB
      Total number of backups: 25
      Oldest backup: 2014-05-10 16:56:40 +0000
      Last backup: 2014-11-14 17:38:44 +0000
      Size of backup disk: Adequate
      Backup size 499.76 GB > (Disk used 89.17 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          1% Google Chrome Canary
          1% coreaudiod
          0% systemstatsd
          0% ps
    Top Processes by Memory: ℹ️
      174 MB Google Chrome Canary
      84 MB Google Chrome Helper
      64 MB mds_stores
      52 MB Finder
      45 MB iconservicesagent
    Virtual Memory Information: ℹ️
      3.02 GB Free RAM
      1.69 GB Active RAM
      317 MB Inactive RAM
      753 MB Wired RAM
      8.69 GB Page-ins
      156 MB Page-outs
    I hope to hear from anyone even to knock me in the head, lol. Thanks in advance and I'll be around trying to figure this out.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 461455494 3627668074 1083382502 1274181950 1855907737 1848501757 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 3301885676 891055588 998894468 695903914 4136085286 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' 's/^.+: //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit sudo\ smcDiagnose );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D13 40 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My macbook pro model mid 2009 is running slow. free memory is 35 mbs and inactive memory is  1.36 gb with a total of 5 gb RAM memory

    Problem description:
    too much inactive memory 1.87 gb and free memory only 35 mb
    EtreCheck version: 2.1.1 (104)
    Report generated 10 December 2014 3:30:26 pm IST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2009) (Verified)
      MacBook Pro - model: MacBookPro5,5
      1 2.26 GHz Intel Core 2 Duo CPU: 2-core
      5 GB RAM Upgradeable
      BANK 0/DIMM0
      1 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 4:42:54
    Disk Information: ℹ️
      WDC WD5000LPVT-80G33T2 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      [redacted] (disk0s2) / : 499.25 GB (142.01 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.driver.KUSBModemCDC07 (4.0.2) [Support]
      [not loaded] com.driver.KUSBModemDataA07 (4.0.2) [Support]
    Startup Items: ℹ️
      JHHPortDetect: Path: /Library/StartupItems/JHHPortDetect
      Sudochmod: Path: /Library/StartupItems/Sudochmod
      Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
      [running] com.bjango.istatmenusagent.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.oracle.java.Java-Updater.plist [Support]
      [running] jp.co.canon.CUPSCAPT.BG.plist [Support]
      [loaded] org.macosforge.xquartz.startx.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [invalid?] com.adobe.SwitchBoard.plist [Support]
      [running] com.bjango.istatmenusdaemon.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [loaded] com.oracle.java.Helper-Tool.plist [Support]
      [loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
      [loaded] org.macosforge.xquartz.privileged_startx.plist [Support]
      [loaded] org.tcpdump.chmod_bpf.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Caffeine Application (/Applications/Caffeine.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
      HyperDock Helper UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      SharePointBrowserPlugin: Version: 14.0.0 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      zako: Version: zako 1.0.0.0 - SDK 10.8 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User internet Plug-ins: ℹ️
      BlueStacks Install Detector: Version: Unknown
    Safari Extensions: ℹ️
      AdBlock
      ClickToFlash
      Awesome Screenshot
      Breaking News
      The New York Times
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Java  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Arupreet: Disk size: 499.25 GB Disk used: 357.24 GB
      Destinations:
      CHIKKI [Local]
      Total size: 331.41 GB
      Total number of backups: 2
      Oldest backup: 2014-06-10 13:36:00 +0000
      Last backup: 2014-09-08 13:57:40 +0000
      Size of backup disk: Too small
      Backup size 331.41 GB < (Disk used 357.24 GB X 3)
    Top Processes by CPU: ℹ️
          8% python
          3% WindowServer
          3% uTorrent
          2% SystemUIServer
          0% mtmfs
    Top Processes by Memory: ℹ️
      1.29 GB JavaAppLauncher
      123 MB SystemUIServer
      102 MB iStatMenusDaemon
      86 MB com.apple.WebKit.WebContent
      81 MB WindowServer
    Virtual Memory Information: ℹ️
      50 MB Free RAM
      1.97 GB Active RAM
      1.90 GB Inactive RAM
      673 MB Wired RAM
      6.70 GB Page-ins
      8 MB Page-outs
    Diagnostics Information: ℹ️
      Dec 10, 2014, 10:48:11 AM Self test - passed
      Dec 9, 2014, 02:54:15 AM VLC_2014-12-09-025415_Arus-MacBook-Pro.crash

    Not sure if using Terminal would help:
    Launch Activity Monitor
    Select Memory tab
    Launch Terminal
    type sudo purge
    password
    10-15 sec later Terminal should refresh and show freed memory & cache

  • HELP AND OR OPINION MUCH APPRECIATED....Thanks!!!!

    Tech Details First:
    iPod Click wheel (4th Gen) 20GB
    Compaq nx9010(laptop)
    XP (SP2)
    Using USB connection from iPod to Computer
    Ok, Hi Guys/Gals, this may be a little long, but I feel detail is the only way to get the best help [please :)] and or advice and opinion. So I will take it from the start............
    Ok last Sat (3rd Dec) I got the iPod, only paid £50GBP and it was spanking, not a scratch on the chrome and not a song on the hardrive. (crackheads to hae some use...Lol!!)
    So I was very happy, plugged into comp and said I needed to format and or restore so could be used on comp...Fair enough d/loaded latest software update, installed, ran it didnt say need update, so I restored it.
    Completed restoration and plugged in, was detected by iTunes afer a minute or so, then I copied the library over..No probs and a very happy me!!
    Had no probs at all.
    THEN, I spoke to friend who just bought a brand new mini but said he couldnt get his comp to recognise, so I told him I had software and bring it over and we will update it...Did this no probs, and also gave him about 300 songs.
    This was on Wednesday.
    Now last night, I connected iPod and it not being recognised. It isnt recognised by iTunes, but it is recognised by the 'remove hardware safely' option on toolbar as 'Mass storae device'...though sometimes wont let me 'safely remove' it from the usb port and sometimes it will.
    At one point I dont know what I did but I saw the folder and exclamation mark icon, but I resetted it and it was ok, but taking long to play songs, so i turned off and went bed...Woke up, chkd iPod and was running absolutely fine, as it was all week.
    BUT still not recognised by comp, though is in comp as 'F' drive, though i cannot right click it as it crashes 'My Computer' folder.
    Anyway, read these and other forums for eight hours (when I should have done some Xmas shopping..Lol!) and see many peeps had the same problem....So I tried EVERY way that I saw in these threads..I will give a few examples (feel free to ask if I tried others I dont mention):
    *Try in 'Disk' mode (not recgonised by iTunes or updater)
    *Uninstall and re-install iTunes/updater (Twice updater:will add to this in a minute!)
    *Many others, aprt from ' Mitch's ' idea of dropping the iPod..LOL!! That is really only a LAST RESORT FOR ME AT THIS POINT.
    Anyway, ONCE earlier this evening, MY iPOD was recognised by the updater (but only offered the option to RESTORE) and I was scared to RESTORE as I was unsure if it would be recognised later. When I closed updater, iTunes automatically opened and recognised the iPod too!!! So I was happy and thought problem was over, but I was baffled as to what I had done to rectify the problem...Anyway, I re-booted comp to chk if all ok, but back to same problems.
    And thats where I am at at the moment.
    SO MY QUESTIONS ARE THUS:
    *Do you think me adding my friends iPod to my computer and doing an update had an affect??
    *I can access a comp at my Parents house 2moro, if I d/loaded update software and the comp at their house recognises iPod, IF I was to RESTORE the iPOD, would it only be restored and usable on their comp, or mine aswell??
    *If the restore (performed on mums comp) was done would it DEFINETLY work on mine??
    *Is it really worth risking the RESTORE if I am gonna have the same problem (possibly) anyway?
    I say this because I already have all the songs on my Comp on the iPod, and there wouldnt be THAT MUCH more for me to put in Library than I already have, maybe 200 at most.
    SO should I just appreciate the fact that the iPOD itself is still working fine (seems so at least) and has my songs on it already, also the fact I got it £50 and be happy with that, or should I still worry about it not being recognised.
    ALSO, just to add (as I forgot earlier in writing) that a couple of times it has come up with the message on my comp (in a grey little box) saying basically the iPOD needs to be formatted or restored to work on the computer and gives an option to UPDATE, but then freezes.
    Again, IM SORRY for the length, but I think it is best to state ALL thats happened, so anyone that can help has at least a good jist of what is going on.
    So I will more than appreciate ANY help/info or advice and definetly ANY opinions, on whether I should be content the iPOD is working etc;
    This is my first post, and over time hope that as my experience grows with the iPod (as I will be buying another in the future for sure ) then I will also be able to share my knowledge with fellow members here.
    Thanks in advance for any help and or opinions from the peeps on the forum....
    Thanks!!
    K
    Compaq nx9010 (laptop)   Windows XP  
    Compaq nx9010 (laptop)   Windows XP  

    Hi,
    Few issues here
    1. Yes, doing a Restore will erase all data in your iPod
    2. Do you have your Music with your iTunes?
    3. It is only a timing issue to me, your iPod will soon will get freeze and then with a sad iPod icon - I had few experiences like that in the past.
    4. You have to make a decision whether you would like to take a risk, it is not 100% sure it will work in your case.
    5.If you decide to have a go, you have to do in the following steps:-
    as your iPod cant get recognized by your PC, then you have to plug it with a Mac, and very likely it will get "force mount" in this way. Open the Disk Utility, and highlight your iPod icon, and go to Tab of "Erase"-but format in "MS Dos files system", then eject your iPod, go to find a PC, and plug your iPod with it, and a window will pop up indicating that your iPod cant be read and need reformat. Click ok, then open the iPod updater with the PC and click Restore.
    I have to say once more, I will only make suggestion that it have proved to be worked in my case, but again, I am not definetly sure that it will work with your iPod. It is at your own risk.
    Good luck, post here if you need further information

  • Help and Support screen popping up unbidden

    Just recently, the HP "Windows Help and Support" screen keeps popping up unbidden, so I have to keep closing it. Very annoying. What can I do about this?

    Thank you for the additional information.
    Here is HP Help and Support for Vista.  I suggest uninstalling it and reinstalling it to see if it solves your problem.  If not, you may have to do a Systems Recovery.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Hp help and support

    Hi can anyone help ? My hp help and support is just not work whenever i click on it it open up and just keep saying that's its gathering information and its been gathering information for more than a day now, so i will be really happy if anybody can help.

    Hisdimple, welcome to the forum.
    I believe that you would receive more responses to your question if you start a thread here.  They are the members who know your computer best.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • SHARED MEMORY AND DATABASE MEMORY giving problem.

    Hello Friends,
    I am facing problem with EXPORT MEMORY and IMPORT MEMORY.
    I have developed one program which will EXPORT the internal table and some variables to the memory.This program will call another program via background job. IMPORT memory used in another program to get the first program data.
    This IMPORT command is working perfect in foreground. But  it is not working in background.
    So, I have reviewed couple of forums and I tried both SHARED MEMORY AND DATABASE MEMORY.  But no use. Still background is giving problem.
    When I remove VIA JOB  parameter in the SUBMIT statement it is working. But i need to execute this program in background via background job. Please help me . what should I do?
    pls find the below code of mine.
    option1
    EXPORT TAB = ITAB
           TO DATABASE indx(Z1)
                FROM   w_indx
                CLIENT sy-mandt
                ID     'XYZ'.
    option2
    EXPORT ITAB   FROM ITAB
      TO SHARED MEMORY indx(Z1)
      FROM w_indx
      CLIENT sy-mandt
      ID 'XYZ'.
       SUBMIT   ZPROG2   TO SAP-SPOOL
                      SPOOL PARAMETERS print_parameters
                       WITHOUT SPOOL DYNPRO
          *_VIA JOB name NUMBER number*_
                       AND RETURN.
    ===
    Hope every bidy understood the problem.
    my sincere request is ... pls post only relavent answer. do not post dummy answer for points.
    Thanks
    Raghu

    Hi.
    You can not exchange data between your programs using ABAP memory, because this memory is shared between objects within the same internal session.
    When you call your report using VIA JOB, a new session is created.
    Instead of using EXPORT and IMPORT to memory, put both programs into the same Function Group, and use global data objects of the _TOP include to exchange data.
    Another option, is to use SPA/GPA parameters (SET PARAMETER ID / GET PARAMETER ID), because SAP memory it is available between all open sessions. Of course, it depends on wich type of data you want to export.
    Hope it was helpful,
    Kind regards.
    F.S.A.

  • Error 999 is shutting down my yahoo mail, someone suggested I "upgrade my Adobe"will this help and w

    Error 999 is shutting down my yahoo mail, someone suggested I "upgrade my Adobe"will this help and whaat should I do?
    E-mail me [email protected]

    Your suggestion of breaking up the export to pdf into sections of pages was excellent. I don't know why I didn't think of it...maybe because I was in panic mode.
    For anyone else who experiences this problem, I exported 50-page sections to pdf with no problem. I now have 7 hi-res pdfs, but that's no problem. The printer should have no problem dealing with it. No error messages came up.
    The only thing I can think of is that InDesign couldn't export that many documents (148) in the book palette to hi-res pdf, and it has no error message available to explain the cause—either outside ID's ability to process or out of memory, even though I have 16G of RAM.
    Thanks again for your help!

  • Difference between nio-file-manager  and nio-memory-manager

    Hi,
    what's the difference between nio-file-manager and nio-memory-manager? The documentation doesn't really discuss the differences as far as I know. They both use nio to store memory-mapped files don't they? What are the advantages/disadvantages of both?
    When to choose the first one and when the second when storing a large amount of data? Can both be used to query data with the Filter API? Are there size limits on both?
    Best regards
    Jan

    Hi Jan,
    The difference is that one uses a memory mapped file and one uses direct nio memory (as part of the memory allocated by the JVM process) to store the data. Both allow storing cache data off heap making it possible to store more data with a single cache node (JVM) without long GC pauses.
    If you are using a 32 bit JVM, the JVM process will be limited to a total of ~3GB on Windows and 4GB on Linux/Solaris. This includes heap and off heap memory allocation.
    Regarding the size limitations for the nio-file manager Please see the following doc for more information.
    With the release of 3.5 there is now the idea of a Partitioned backing map which helps create larger (up to 8GB of capacity) for nio storage. Please refer to the following doc.
    Both can be used to query data but it should be noted that the indexes will be stored in heap.
    hth,
    -Dave

  • Guys Plz help urgent Phone memory is 0

    i recievd a song from bluetooth and it has been saved but it reduced phone memory i tried to fing that song inthe phone memory but not found in phone memory plz tell me the locations so i can transfer to mass memory or bluetooth and can u plz tell me how to change the path of recieving anything means i received from bluetooth i want that it should be go to directly to massmemory folder .
    OR
    any one can tell me how to transfer the song from phone memory to mass memory
    Solved!
    Go to Solution.

    1) For your phone memory to be 0 you must have apps and everything stored there on C: and not utilising the mass storage E:.
    I agree with matt_t that is how it is done when using bluetooth so havent a clue whats going on there.
    2) Have you tried plugging your phone into your PC via USB and exploring your N97 throught my computer  if using windows and double clicking the N97 icon.
    Looking for the C: Phone folder and finding the song and dragging and dropping into E:mass memory music folder????
    OR drag from your C: to your PC and dragging back to E:mass memory Music Foler if the above doesnt work.
    BUT 1 song is usually on around 3MB so you still have issues with 0 memory.
    3) If all your apps are stored on C: why dont you uninstall them and install onto your E:mass memory.
    4) Internet i havent a clue about but with your memory so so low thats the least of your problems at the moment.
    Thats all i have to help with i hope you find your song and your memory increases.
    Message Edited by matto73 on 17-Oct-2009 05:45 PM
    Nokia N97 Unbranded RM-505 [0585162]
    Firmware 21.0.045
    It's NOT about the Kudos they just make my day, hit the Star if I Helped.

  • Hi Friends ....Difference between SAP memory and ABAP memory

    Hi Friends,
    I faced a interview and they ask this question
    What is the difference between SAP Memory and ABAP memory..

    conti
    SAP Memory
    SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement.
    Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens.
    ABAP Memory
    ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
    A simple example of ABAP memory is using the EXPORT/IMPORT statements.
    Here in this program, I get the data, export it to memory,
    clear out the internal table in my progam, then reimport the data into it and write out the data.
    You probably wounldn't do this in a normal program,
    but this is how you can pass data from program a to program b when A Submits program B.
    report zxy_0002 .
    data: it001 type table of t001 with header line.
    select * into table it001 from t001.
    export it001 = it001 to memory id 'ZXY_TEST'.
    clear it001. refresh it001.
    import it001 = it001 from memory id 'ZXY_TEST'.
    loop at it001.
    write:/ it001-bukrs, it001-butxt.
    endloop.
    SAP Memory
    SAP memory is a memory area to which all main sessions within a SAPgui have access.
    You can use SAP memory either to pass data from one program to another within a session,
    or to pass data from one session to another.
    Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters).
    These parameters can be set either for a particular user
    or for a particular program using the SET PARAMETER statement.
    Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement.
    The most frequent use of SPA/GPA parameters is to fill input fields on screens
    ABAP/4 Memory
    ABAP memory is a memory area that all ABAP programs within the same internal session can access
    using the EXPORT and IMPORT statements.
    Data within this area remains intact during a whole sequence of program calls. To pass data
    to a program which you are calling,
    the data needs to be placed in ABAP memory before the call is made.
    The internal session of the called program then replaces that of the calling program.
    The program called can then read from the ABAP memory.
    If control is then returned to the program which made the initial call, the same process operates in reverse.
    SAP memory
    The SAP memory, otherwise known as the global memory,
    is available to a user during the entire duration of a terminal session.
    Its contents are retained across transaction boundaries as well as external and internal sessions.
    The SET PARAMETER and GET PARAMETER statements allow you to write to, or read from, the SAP memory.
    ABAP/4 memory
    The contents of the ABAP/4 memory are retained only during the lifetime of an external session
    (see also Organization of Modularization Units).
    You can retain or pass data across internal sessions.
    The EXPORT TO MEMORY and IMPORT FROM MEMORY statements allow you to write data to, or read data from, the ABAP memory.
    ABAP Memmory & SAP Memmory
    http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
    http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
    Set
    http://www.geocities.com/SiliconValley/Campus/6345/set_para.htm
    GET
    http://www.geocities.com/SiliconValley/Campus/6345/get_para.htm
    EXPORT
    http://www.geocities.com/SiliconValley/Campus/6345/export01.htm
    Other Imp Help
    http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm

  • Washington Post articles and opinions do not display the body of the text even though the rest of the page displays correctly.

    Washington Post articles and opinions that are clicked on in my email, no longer display the text of the article or opinion. This is a recent development and may be caused by a Firefox upgrade as I did not previously have this problem. The problem does not exist for Internet Explorer. The webpage displays the top part of the page and the links and advertisements on the right side of the page but shows only "white space" where the article or opinion text would regularly be displayed. No error or problem message is displayed. A page refresh does not correct the problem. I am using an IBM ThinkPad laptop running Windows XP with all updates installed and Mozilla Firefox with all updates installed. HELP!???!!

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    (You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now")
    (2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help?
    Some sites now try to detect ad blockers and may be sensitive to other add-ons... A standard diagnostic to bypass potential interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode."
    If the site works correctly, this points to one of your extensions or custom settings as the problem.
    Any change?

  • N86 hard format and restoring / Memory issue

    Hello Nokia hello all,
    I have an issue in my N86; after a simple restart I got memory crroupted in E:/ and external memory. and the phone doesnot working properly. I did hard reset according to the available instructions but it does not change anything.
    currently I caanot store anything in the E:/ drive because I lost it after a few days, and also the external memory is crroupted and does not open. 
    please your urgent help. 
     best regards,
    Solved!
    Go to Solution.

    Have you checked whether Nokia Suite upon PC gives you the option to re-install existing device software?
    When you say "hard reset" was this *#7370# followed by 12345 (default Nokia lock code unless altered by user) or three key depressed power on reset until Nokia "Shaking hands" logo appeared?
    As your N86 supports UDP = User Data Preservation you haven't restored possibly corrupt settings?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

Maybe you are looking for

  • External Hard Drive (Samsung) not recognised since I updated to Mavericks

    Hi, Since I updated to Mavericks I can't see my external Samsung HD when I plug it in. It's lit up and my ports are working fine. I can however see that it is listed under 'Disk Utility' -  butwhat do I need to do so that I can use it again? Any advi

  • How to change colors of designs

    I would love to be able to change colors of designs I make in Printshop. On my PC I could just highlight an object and choose a color and change it. The Mac is supposed to be the great "artistic" machine, yet it can't seem to do half the stuff my PC

  • How to add attachments to draft mail

    Hi i know i can send docs from Pages for example individually but is there a way i can send it with a draft i have already written? Thanks

  • Disk size requirement

    Hello, I'm planning the installation of an SDS. I don't find any reference to the disk size requirements in the documentation. Is the any recommendation ? We will be managing Solaris Sparc 8,9, 10 as well as Soalris X64 and Linux RHES 3 and 4. Around

  • EJB CMP remove create cache issue? DuplicateKeyException

    EJB CMP remove create cache issue? DuplicateKeyException Hi I have an EJB 2.1 application using CMP. Most things work fine. But if I in a transaction tries to remove a bean and create a new one with the same primary key I get a DuplicateKeyException: