Help;;;;;cant select calendar when creating inventory organization parameters

hello there i am trying to define a new inventory organization. i have created inventory organization. i opened organization parameters and in the inventory parameters tab, when i tried to enter calendar, it is saying list of values has no entries. it is giving following error:
frm-41830: list of values contains no entries.
please help me
tommy.

It seems that you don't define a work calender and build it. see the document
http://www.google.com.hk/url?sa=t&rct=j&q=Oracle+inventory++Implementation+Guide&source=web&cd=1&cad=rja&ved=0CCsQFjAA&u…

Similar Messages

Block zero quantity when creating Inventory Transfer

Hi all,
does anyone know how to block zero quantity when creating inventory transfer?
for example: I have zero quantity in warehouse A. Then I want to transfer it to warehouse B. The system accept that. So, when I check that item in warehouse A, the in stock column become negative. How I can protect it?
please help me. it's very urgent.
thanks
sisca

Go to Administration > System Initialization > Document Settings > General Tab
Check Manage Inventory nu Whse and also check Block negative inventory. Read details below of their functionality.
Manage inventory by whse
Defines whether the check is performed for the warehouse selected in the document row. If you select the checkbox, the system checks the minimum inventory level in the warehouse that was selected for the item when the sales document was entered.
If the transaction causes the inventory level in that warehouse to fall below the minimum inventory level, a warning message appears even if the total available inventory of the item is greater than the minimum warehouse quantity. If you do not select this checkbox, the system checks the total available inventory in all warehouses where this item is stored.
You can also define automatic notification for a specific user when the inventory level falls below the minimum level. A purchase transaction can then be initiated.
Block negative inventory
Select to block documents that would cause the level of inventory to fall below zero. If you deselect the checkbox, the message Negative inventory usage is not in accordance with accounting rules. Are you sure you want to enable negative inventory usage?
If you select Manage inventory by whse and Block negative inventory, SAP Business One calculates the block per warehouse. However, if the item is not handled by a warehouse and you do not select Manage inventory by Whse, the block is calculated for all the warehouses.

Cannot select name when creating new DC

Hi all,
It seems I encounter this kind of problems over and over again when dealing with NWDI )-:
In this thread Cannot select vendor when creating new DC I couldn't select vendor.
I installed a new NWDI system (version is 7.18), did all the post installation steps including the configuration of a name server on the SLD but I cannot select "name" and the vendor I entered is not shown (even if enter it manually I cannot select name so it doesn't help - see snapshot).
[snapshot|http://img134.imageshack.us/i/nwdi.jpg/]
Snapshot: http://img134.imageshack.us/i/nwdi.jpg/
I did name server config on : http://server:port/dtr/system-tools/administration/NameServerConfiguration
Name prefixes are defined under 'Name Reservation -> Development Component Name' - I used <x.y>/* and <x.y>/tst (x.y is namespace like com.omri).
I updated CMS after setting the name server, restart J2EE and did all kind of voodoo without success.
I use local SLD which is part of the J2EE.
I don't get any error messages (from NWDI/SLD/NWDS).
I don't remember this kind of problem with NWDI on 6.40 versions.
Moreover I installed and configured several systems on 7.12 & 7.13 versions without any problems but with 7.14 & 7.18 I've problem with setting the name server...
Please help,
Thanks,
Omri

Solved it on my own by deleting and creating the track again (with the same settings!!!)

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

Dialog for selecting certificate when creating a signature

When creating a digital signature in Adobe Professional 7 a dialog is presented to the user showing the certificates available to the user. The properties of the certificates shown are: Name, Issuer, Storage Mechanism and Expiry time.
The problem then arises when several certificates are issued to the user from the same CA with the same expiry date... For a "normal user" it is not possible to distinguish between the certs.
Is it possible to modify this dialog to show other information, e.g. Friendly name?
Is it possible to filter the list of certificates shown by e.g. Extended Key Usage OIDs present in the certificates?
Thanks
Kjetil

May be you can try inserting Image as signature
Jyothi

Copy inventory organization parameters

Hi friends
i want to know what are the meaning of the parameters (BOM, Routing, Purge) we specify when running Copy Inventory Organization concurrent process.
as far as i know BOM means Bills of Materials, but what does it actually mean in inventory?
and what is Routing and Purging in inventory? i found several answers in Google, but still i need a summarized answer. pls help me.
thanks in advance.

Hi ,
Please go thru this link http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html.
On Inventory Management you can manual related to Oracle INventory Copy Organization Implementation Guide.

Organization selection popup when creating new prospect

Hello,
When I create a new prospect and go to the opportunity tab and create new opportunity I get an error because organization has not been selected. Now instead of creating an opportunity from prospect->opportunity tab if i go to Opportunity screen and create a new opportunity for the same prospect then I get a popup for organization selection. How can I get the same behavior on both opportunity pages? This is a bug and I dont know if there are any oss notes out there.
Thank you,
AP

Hi AP,
Glad to hear that the issue is resolved. It looks like you forgot to add the points, :-).
Best Regards, Adil

Can't select calendar with creating event on iPod touch

Hi everyone - Thanks in advance for your help!
Here's the deal:
I have 4 calendars on Google Calendar. I use google's "Calaboration" to push those calendars to apple ical on my macbook pro. Those calendars then show up just as they should on my ipod touch. All that works like a song. Couldn't be happier.
To be clear, those are the ONLY 4 calendars I use. I have not, and don't plan to create any others in ical.
HOWEVER, when I try to create an event using my IPT, it will not allow me to select which of those 4 calendars I want to use. I can see the field where I would do so, but it's grayed out. Instead, it creates a 5th calendar called, creatively "calendar" and puts the event there.
The new "calendar" shows up in ical on my MBP, but of course does not sync to google.
What's worse, I can't even change which calendar I want it to show up on in ical on my MBP.
Any help is greatly appreciated!
J

I think I solved it unless someone knows a better way (likely). I went from manually manage to auto sync. That drastically increased my free space. Apparently that made the "keep only newest episode" command go from itunes to the ipod.
Once my space was freed up I went back to manually manage so I could use smart playlists again.

Photo's disappear from select panel when creating a book (version 7.1.1.)

Hi,
If I sort all photo's on date, and look in my photo library, I do not get the same photo's when I switch to the project panel to create a book. The photo-select window above the book lay-out window, only shows a part (all be it a large part) of my complete photo library. Does anyone know how to 'force' iPhoto to show all photo's form the Library in the photo select window?
Thanks!
Paul Harts

The photos in the thumbnails across the top when you are creating a book are ONLY the ones you have placed there - either by having them selected when you created the book project or by dragging them to the book project. The only way to "force" iPhoto to display all of your library is to select all of your library and drag it to the book project - which I personally would find impossible to work with
LN
Message was edited by: LarryHN

Please Help - Avoid default name when creating constraints

Here I am creating two very simple tables:
create table supplier
     id number not null,
     constraint pk_supplier primary key (id)
create table product
id number not null,
supplier_id number not null,
constraint pk_product primary key (id),
constraint fk_product_supplier_id
foreign key (supplier_id) references supplier(id)
After done while I choose to view table constraint information by using:
select table_name, constraint_name
from user_cons_columns
where lower(table_name) = 'product';
I get result:
TABLE_NAME                     CONSTRAINT_NAME
PRODUCT                        SYS_C005441
PRODUCT                        SYS_C005442
PRODUCT                        PK_PRODUCT
PRODUCT                        FK_PRODUCT_SUPPLIER_ID
What is the "SYS_C005441" and "SYS_C005442" for? Can I avoid creating them?
Thanks

Justin Cave wrote:
Are you suggest not explicitly naming all your constraints? Or just the NOT NULL ones?No, not at all. Did not even thought that far when I responded. Bit of foot in mouth as I only thought of not null constraints. Blame it on a lack of coffee. :-)
I usually name primary & foreign key and check constraints. But not null constraints - too much of an effort to name them IMO.
But you do raise an interesting topic. Why bother naming some constraints (e.g. PK and FK) and not others (e.g. not null)? So playing devil's advocate, why should we be naming constraints at all?
It sounds like you're suggesting that all constraints should get system default names. Well, one can argue that the same effort of naming other constraints is not worth it - why have null constraints as the exception to implicit naming? I would think that the issue I raised also applies to all constraints.
You have multiple foreign key constraints for INVOICE_ID - how do you name these? I would like both the table and column names as this will provide the meaning needed when seeing the constraint being violated. But with 30 chars only, that is a problem. So invariable one needs to start to abbreviate table and column names in order to make it meaningful constraint name. Been there many times - disliked the constraint name I came up with every time, as it was a compromise and not the actual naming format I would have preferred.
If that's what you're suggesting, doesn't that create problems for you when different environments have different constraint names? I know personally that I'd much rather have named constraints so that when there are constraint violation errors in production, I can start troubleshooting the problem in my local environment without first determining how to map the production constraint name to my local database's constraint name. Understand your point - and yes, it can be an issue. But by the same token, why should an application user ever see a default Oracle exception? With the exception of system-type exceptions (e.g. no more tablespace space, eof on communcation channel), all other exceptions should be custom application exceptions.
Showing for example a "+ORA-00001: unique constraint (xxx.xxxxx) violated+" is wrong IMO. The app code should trap that exception and raise a meaningful and unique application exception for that. The user seeing anything other than a custom app exception, should itself be an exception.
And I'd much rather be able to put the constraint name in a script that is to be promoted through the environments rather than coming up with a process that uses dynamic SQL to figure out the name of the constraint I want to do something to. Well, I would not rely on a constraint name itself to determine what it is. Just because it says fk_invoiceid_invoices does not mean that is is a foreign key on column invoice_id and references the invoices table. The safe/proper thing to do would be to query the data dictionary and confirm just what that constraint is.
I suppose if you know that all the lower environments are very recent clones of production rather than running all the scripts in source control that these problems may not be particularly large. But I'm curious if you have some better approach to handling them (or if I'm completely misinterpreting what you're suggesting).Not sure if you recall some feature discussion with Tom and others (was on asktom?) when someone came up with this core issue and suggested it be addressed by allowing one to define an exception message with the definition of the constraint. Cannot recall the exact syntax proposed, but I do remember thinking that it was not a shabby idea - as this solves the problem of having to invent a meaningful name using 30 chars only. And it also removes the need for trapping that constraint violation in all app code that may cause the exception and raising a custom and meaningful app exception instead. Not too mention that plain and direct SQL access will show the same exception message.
Perhaps in Oracle 12c? I assume the c as it seems that The Next Big Thing is cloud computing and surely Oracle 12 will somehow try to exploit that buzzword - as it has with i (Internet) and g (Grid) versions. ;-)

Error when creating inventory record

Hi All,
When I try to create an inventory record using Txn LX15 and batch input session I get the following error in the error log in the batch input session
"Number of allowed bins exceeded after storage bin P1-06A"
This error is for transaction LI01N as per the error log.
Has someone come across such an error? Is it related to number of stoarge bins allowed per inventory document?
Regards,
V S

Hi V S,
Maximum number of items on inventory document may be restricted. Please check your settings:
SPRO > LE > WM > Activities > Physical Inventory > Define Differences and Document Limits
Maybe field V_T3401-MINPS is empty for your WH and this causes your problem (L4063).
Thanks,
Swamy H P

Can I do a "select all" when creating themes and settings?

When I am creating my dvd, can I do something so that each of the scene selection screens will have the same theme, same movie clip in the drop zone and same music playing? Is there a way to select all the same preferences for the customize option? Thank you!

Hi Navy91,
After you have finished customised the first scene selection menu screen, use the Adanced > Apply Theme To Folders menu command to apply the same theme settings to all other scene selection menus following it.

Help CFGFWK-60814 error when creating weblogic domain(Config.cmd)

Hi,
I've installed soa suite 11gR2 without problem on windows 7 Turkish platform and Oracle XE DB. But, when I create domain based (run config.cmd) on templates it gives CFGFWK-60814 error; it says template can't be applied because it can't find dependencies although required files are already in correct directories.
I found similar error on google, but I couldnt find solution.

Hi Roshni,
What is the version of wls you are using ?
There is no silent mode of domain configuration. There is silent mode of wls installation.
You can refer to :
Introduction - 11g Release 1 (10.3.6)
Thanks,
Sharmela

Cannot select vendor when creating new DC

Hi all,
I'm using NWDI, version is 7.14.
When I try to create a new DC the vendor dropdown is disabled and all I see is sap.com (see snapshot - http://img390.imageshack.us/my.php?image=newprojectjq3.jpg).
I have opened several projects in the past with no problem (and I could choose my own vendor, the one I created in the SLD).
How can I solve this?
Thanks,
Omri

Hi Pascal,
I don't see any errors in the NWDS log file:
!SESSION נוב 17, 2008 11:07:54.359 -
java.version=1.4.2_09
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=iw_IL
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide C:\j2sdk1.4.2_09\bin\javaw.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Documents and Settings\All Users\Application Data'
-cp C:\Program Files\SAP\IDE\IDE70\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Program Files\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600 -data C:\Documents and Settings\mmm\Documents\SAP\workspace -install file:C:/Program Files/SAP/IDE/IDE70/eclipse/
!ENTRY Startup 1 0 נוב 17, 2008 11:07:54.359
!MESSAGE Sap NetWeaver Developer Studio - Build: 200711102147
Under http://<server>:<port>/dtr/system-tools/administration/NameServerConfiguration I see the following URL: http://<server>:<port>/sld/cimom with nwdi admin user and password and 'TrustedCAs' as 'Trusted Store'. I only have entries under the 1st name server (the 2nd is empty).
When I navigate to http://<server>:<port>/sld/cimom I get 'This is the location of the SLD CIM Object Manager that processes WBEM requests (CIM operations over HTTP).'
When I check the name server prefix 'haifa.ac.il/hu' in the SLD the 'Disable this SLD as Name Server for NWDI' button is active...
Regards,
Omri

Help - Item Assignment at Inventory Organization level from the Interface

Hi,
I have developed an Inventory Item upload Interface (MTL_SYSTEM_ITEMS_INTERFACE Table) for Oracle Apps R12.
It works fine in uploading the Items to Master Org which the template is created. But When I tried to upload at Inventory Organization level it returns an error says 'Template or Template ID is not assigned for the Organization'.
How can I assign/upload the Item at Inventory Organization Level? I have already tried the Organization Item Assignment Report, It works fine and assign the Items to relevant Organizations. But the parameters are Item Range which I cant use those parameters.
Please help me to Upload items at Inventory Organization level from the Interface.
Thanks

open any delivery.
1. select any delivery item number( double click).
2. go to text tabstrip of the item.
3. select the text type and double click on the blank space where we write some texts will give you new screen for writing text will give you text screen.
then in menu: goto->header will popup screen with details given below.
text name: delv+item num
Language: 'EN'
text ID: '0001'       " for first text type and so on.
Text Object: 'VBBK'
****CODE.
data: ist_text type table of tline,
      wa_text type tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
   CLIENT                        = SY-MANDT
    id                            = 'textid'
    language                      = sy-langu
    name                          = 'textname'   " its concatenation of Dlv no. and item number.
    object                        = 'VBBP'
tables
    lines                         = ist_text
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards
Ashok

Help;;;;;cant select calendar when creating inventory organization parameters

Similar Messages

Maybe you are looking for