Help! Cisco WAP321 Roaming problem
I've setup 3 Cisco WAP321's with Single Point Setup turned on. SPS works great - everything propagates and I can see that all 3 WAPs have the same configuration.
However, I have a problem. With my laptop, I connect to the wireless network downstairs on WAP1. Then I walk to a remote part of the building where the only WAP within range is WAP3. My laptop disconnects from the network. When I look at the list of networks that my laptop can see, it can see my SSID with 4 bars - this is WAP3 (it's pretty far from the rest of the network, and it's separated from the other WAPs by a cinderblock wall). When I try to connect, my laptop says "cannot connect to (SSID)".
I've tried this with my Windows laptop and my iPad.
When I go back downstairs (I left my laptop up near WAP3 - definitely not in range of WAP1) and login to one of the WAPs and go to Single Point Setup > Sessions, it tells me that the MAC address of my laptop is connected to WAP1.
It seems that the WAPs are not passing my session from WAP to WAP. I cannot turn on WDS because it says that WDS doesn't work when clustering is turned on.
Am I totally wrong about the way this stuff is supposed to work? Shouldn't I be able to roam around the building and still be connected?
Any ideas?
Hi Salam, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for this inconvenience, in this case I advise you to check your configuration following this document https://supportforums.cisco.com/docs/DOC-31044 in case of roaming, for the remote part of the building issue I advise you to check this other document https://supportforums.cisco.com/docs/DOC-29821 I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.
Similar Messages
-
WLC 7.4.100.60 and roaming problems on 8500
Hello,
After installing an 8500 controller on 7.4.100.60 and migrating 1000 APs do this controller, we have the following problems:
[1] clients get disconnected and loose sessions (note: client is mobile gun and is heavily mobile). I have the impression there are more coverage holes. This might be due to bug CSCue13108, but says fixed in 7.4.100.60, we wil be upgrading to 7.4.110.0 anyway shortly.
[2] we have lots of L3 roaming problems between clients, especially when clients roam between old WISM controller and new 8500 controller. They don't roam, they get disconnected and reconnected, resulting in ip address change, resulting in sessions loss. Old controller still runs 7.0.230.0 but compatibility matrix says these two versions are L3 roaming compatible.
However, the release notes of 8500 mention this: "Cisco 8500 Series Controller cannot be configured as a guest anchor controller. However, it can be configured as a foreign controller to tunnel guest traffic to a guest anchor controller in a DMZ"
Because Layer 3 roaming is similar to guest traffic tunneling, does this mean that the 8500 can be the initiator of a L3 roam tunnel, but cannot be the endpoint of a L3 roam tunnel ?
We have done a test that seems to confirm this: client starts on 8500 in state "local", goes to AP on old controller (7.0.230.0), but roam doesn't work. Client gets re-associated with ip address change. Then when moving back to the 8500 controller, the client does roam successfully, keeps its ip address in the 7.0.230.0 vlan and gets status "foreign" on 8500 controller. controllers are in same mobility group and mobility connections are all up.
In the 7.5 release notes, this limitation is not mentioned anymore. Does it mean it is solved and 8500 can be used as guest anchor controller in 7.5 ??
regards,
Geert[2] we have lots of L3 roaming problems between clients, especially when clients roam between old WISM controller and new 8500 controller. They don't roam, they get disconnected and reconnected, resulting in ip address change, resulting in sessions loss. Old controller still runs 7.0.230.0 but compatibility matrix says these two versions are L3 roaming compatible.
Roaming from one AP to another that shares the same controller is totally different with inter-controller roaming, which you have now. I believe WiSM-1 has 180 ms compared to the 90 ms on a 5508. And this time difference means alot.
So when your client goes from one controller to another, they actually have to do a full re-authentication to the new controller.
I presume both the old and new controller are in the same Mobility Group?
However, the release notes of 8500 mention this: "Cisco 8500 Series Controller cannot be configured as a guest anchor controller. However, it can be configured as a foreign controller to tunnel guest traffic to a guest anchor controller in a DMZ"
Pffft! That'll be the most expensive Guest Anchor Controller if I follow this solution. -
Urgent Please help with a Conferencing problem in CUCM 6.1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
We have a configuration of CUCM 6.1. We have 24 voice ports (FXO) configured in H 323 registered with the call manger. A CUE 3.2 configured for IVR and mail box. Gateway is a Cisco 3845 and the IOS version is 12.4(15) T10
The problem is whenever a conference is configured with an outside number the FXO port is not releasing after the call disconnects. It is not FXO disconnect problem. This happens only when a conference is taking place. There is no problem with any other outside or inside calls.
I am attaching the configuration of Gateway. Please help me with the problem, I am very much thankful for you that.The Family pack covers upto 5 computers, other Install Disc cover one computer only.
-
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Data Roaming Problems with Lumia 610 and 710 phone...
Data Roaming problem with Lumia Wndows 7.5 phones. We have a Lumia 710 and also 610 phones on Virgin pay monthly sim cards. We cannot get data raoming to work on either phone. We have tried in a number of locations in France and Switzerland. Virgin confirm roaming and data roaming are set up on our account.
- I have purchased Data Passes.
- Settings>Mobile Network active network shows current operator
- Data Connection is on,
- Data roaming option shows "roam",
- highest connection speed is 3G,
- network selection is automatic.
- Flight mode is off.
- Account settings are ok because everything works on Wifi.
- Connection has been full bars showing 3G.
- I have tried hard resets of phone, manual network selection, deleted browsing history,
- phone software reports that it is up to date,
- I have run Network Setup which confirms phone has been updated network settings for relevant operator.
- Telephone calls to Virgin from Switzerland could not resolve the problem.
- Discussions with Virgin since returning home have not been able to solve the problem. It seems to be an issue with Lumia phones.
Can anyone help please? Nokia - why doesn't this work on your phones?I'm like what an OS this phone has. All I can say is that if you own MS stock dump it fast as the OS on this phone is so bad its not even funny.
I think what they are trying to do here is a last ditch attempt to capture the online services market but it isn't going to work, because they have made this OS to weird.
I'm a pretty seasoned user and I generally am able to get gadgets to work but dudes this puppy is something else. I have 14 days to exchange it so Im going to give it my best shot for another couple of days and see where it goes.
The phone itself is pretty decent otherwise I would have returned on the 2nd day. Its pretty fast and the screen is nice and bright and if not some major concerns I wouldn't be a complaining.
1st} There is no way to import your bookmarks into the phone without using a online service.
2nd} I haven't been able to successfully export my old contact list from my LG P500 Android.
The 710 seems to only use contacts that are stored on online services even though I have imported my contacts using the Contact transfer function on the phone.
3rd)The phone won't shut off while charging even if you shut the phone down , plug it in and it turns on no matter what you do.
The Zune software is all glitter and no meat too unfortunately.
I really wanted an alternative and the phone is such good value and a local new Provider has a 27 $ a month unlimited everything, but luckily they have a 14 day phone exchange policy.
I'm going to keep for a few more days and see if I can get it to work the way i want it to.
Moderator's notes: Profanity removed, such language is not tolerated on the forums, please read the forum guidelines. -
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
Please help me with Bios problem
I have laptop toshiba Satellite L735-S9311D.
I used windows service station and update bios to the latest version during installion I forgot to unplug my external HDD.
Error message appeared , Now no display on the screen.
So, Please I need help to solve my problem.Please..............
-
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your helpTry assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...
-
Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anythingYou need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546) -
I have an iPhone 4s and it is now deactivated. the phone is asking for my apple account and password. but i have forgotten my password. i tried to reset it on iforgot.apple.com, and when i entered my apple id the next thing that appeared on screen is that i have to chose either email verification or security questions. then i click the security question then it asked about my birthday. there where only asking the month and day. then i entered my birthday which is March 8.
so can somebody help me with this problem?
my apple id account is "[email protected]"
thanks in advance!The email you should NOT have published, is your iCloud, not Apple ID
You Apple ID is a valid email address
This is a user forum, not Apple customer service.
I gather the security question did not work.
If you have an email address, why not use that?
If this fails you have to contact support and schedule help. -
My iphone 4 was on ios 5.0.1, then a few days ago I upgraded it to ios 6.1.4, then the apple logo won't stop flashing. Can anyone help to resolve my problem? Thanks in advance
I'm trying to restore my iphone by using the recovery mode. But it always seems to run out of time, any idea why is that? Thank you again
-
I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1
I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated. -
Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computerThe following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.
Maybe you are looking for
-
Hello All, I'm trying to use two different fiscal year variants; one for Weekly and One for Monthly. I'm using one storage bucket profile for the Weekly using the fiscal year variant "ZW" and I'd like to use the montly fiscal year variant "ZM" <b>M
-
Coding to scan document from third party in SAP
Hi, Plz send the coding to scan from the third party (scanner) into SAP and that scan copy should need to store as a JPG file format in one folder. Thanks in advance
-
Inventory Management Loading Procedures
Hello, I have some doubts about the using of those datasources (BX, BF and UM). Here is my scenario: 1. No historical data is requested, just new data after going live. 2. We are planning a downtime due to cutover phase to our go-live, here is a good
-
can anybody help me
-
Is there a way to recapture media with an additional header on it? So, say I wanted to disconnect my media and recapture it with the in point on each clip backed up by three or four seconds. How can I do that?