How to recapture with header?
Is there a way to recapture media with an additional header on it? So, say I wanted to disconnect my media and recapture it with the in point on each clip backed up by three or four seconds.
How can I do that?
You could however, simply create a new 'logged' clip, with the adjusted IN points.
If you've already edited with the original media, you'd need to rename the new clips exactly as you named the originals, if you needed it to reconnect to cuts already made.
Then, I'd make the original media offline and reconnect to the new media.
Bear in mind that if you originally did a non-controllable device capture, you won't have the same time code from the original captures.
K
Similar Messages
-
How can I add header on printing with Numbers
How can I add header on printing with Numbers? The previous version use to have it and I cannot find it in the new one ...
Hi Tanya,
Glad to hear that you found how to edit page headers and footers in Numbers 3.2. I agree that Help in Numbers 3 is woeful. No searchable PDF to download and use offline. All is online (one page at a time) and we need to know the terms we are looking for before we look.
The first HelpDesk:
http://www.youtube.com/watch?v=pQHX-SjgQvQ
For printing to paper where layout is important, I use Numbers '09 (Numbers 2.3) with its Print View. But it is orphanware. As the name suggests, there has not been a major overhaul since 2009. With that in mind, it is a useful version to hang onto while we hope and wait (and provide feedback to Apple) for something in future versions of Numbers 3.x to provide better layout capability.
Indeed, each new update of Numbers 3.x has restored more of the old features while adding new features that are enhancements over Numbers '09. Many of the Numbers 3 enhancements reflect long-awaited wishes through this forum, and were passed on by Numbers Feedback to Apple. So it seems that Apple does take heed of feedback.
In the meantime, I enjoy the charm of Numbers '09 whilst exploring the new features of Numbers 3.
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
(Very long thread because it started with Numbers 3.0, and enhancements have continued through Numbers 3.2).
Hints on workarounds in Numbers 3 is here:
https://discussions.apple.com/message/23622372#23622372
Some workarounds are no longer needed, but what amazes me is how many Numbers '09 features (the so-called "lost" features) were not lost; the settings have simply been moved. Moreover, many features such as margin settings carry over with a Numbers '09 document or template into Numbers 3.
Hints for layout on screen before printing to paper:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
Regards,
Ian. -
How do I import binary data files (with header info) into DIAdem?
We have lots of data acquired by nCode datagate. Files are binary data with header info. How do I import this into DIAdem? Typical (short) file attached. Also of interest, can I stream data from Sony PC208/SIR1000 recorders?
Attachments:
Propshft.dac 4 KBI have successfully imported your file into DIAdem using the nCode file filter included with DIAdem. You might have to make that file filter known to DIAdem by following these steps (this assumes you have version 8 of DIAdem):
1. Go to the 'Window' menu in DIAdem and select 'Close all'
2. Go to the 'Settings' menu and select 'GPI-DLL Registration'
3. Click the 'Add' button in the window and select the 'GfSnCode' DLL in the 'DIAdem/AddInfo' directory
4. The program will prompt you to restart.
5. After you have restarted DIAdem, go to the DATA icon, select 'File - Open' from the DATA menu and in the dialog that appears, choose 'nSoft Data File Format' in the 'Files of type:' field.
6. Select your data file and load
That's it.
With regards to your Sony reco
rder data, I would need to get my hands on an actual data file to try it out. In general, DIAdem can import ANY binary file format by creating a header in the 'File - Import via header' section in DATA. If you have lots of data files from the SONY recorder, a DLL can be created for that specific file format with the free DLL toolkit included with DIAdem.
Leave me a message here if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
How to put the header in excel file in GUI_DOWNLOAD
Hi,
I have a requirement , Which I m downloading the contents of internal table using the GUI_DOWNLOAD in excel format, I need to keep the first line of the excel sheet as a header, Can any one suggest how to go for this,Hello,
You can have the data in the data tab & field name in the field tab. And so you can download both the field name and the value for the same using the FM u2013 GUI_DOWNLOAD (File type should be u2018ASCu2019).
Hope, you need additional information to be added as the header.
One option: You can call the GUI_UPLOAD twice.
First one with the header in the data tab.
Second one with the option append = u2018Xu2019 with the actual data and header and pass the same above file name as input.
Also, there is a solved forum already exists but with a different solution. You can go through the below link also:
Re: GUI_DOWNLOAD with Header
Regards,
Selva K. -
Internal table in Excel output with Header and Total
Hi All,
I have a selection-screen of a report where there is option to specify the path of a file to be stored in local PC. This Report gives output in ALV format which displays header and total of columns.
Now, the requirement is, when the user specifies a path for the file in selection screen it should download in the specified location with header and total row into an excel format.
The issue is, I have the internal table with data without total and header row and the total is getting displayed in the screen through ALV feature. I am not sure, how to give the same output in downloaded excel with header row and total as it is displayed on screen.
Please let me know, if you have any suggestions.
Thanks & Regards,
Anshumita.try using TOP OF PAGE event and write the number of records in the header part.
hope this will help. -
ALV Display with header on each page.
Hi experts,
I had develop the report which output comes in ALV with heading. While printing the output, suppose there are 60 lines in output and 15 lines on each page so 4 page will print. Now i want the same heading will come on each page.
Is it possible? if Yes how?
Pls reply.
Thanks,
Abhishek.Hi,
Write the heading in the top-of-page.
You will have to register the event TOP-OF-PAGE and in the corresponding form write the header.
Regards,
Ankur Parab -
Apex IR report with Heading label
i have IR report with 15 column with heading..
The end user can accessing from different department, when the user can see the report shown only their particular department rows only. each department have different column value and Header label .how can display the column header depend on the department user.
e.g. IR report view
Seq# -- Department -- date -- Subject/Customer Message
1 Communication done with Jony(from HR department)
2 low sales from East region(from Sales Department)IN the IR report Table data structure.Heading_code value as LOV in IR form(1.Subject/2.Customer Message/ect...) and Column_value as Text Field.
Seq# -- Dept_name -- Heading_code -- Column_value
1 HR 1 Communication done with Jony
2 Sales 2 low sales from East regionApex have limitation of one IR report in one page. so i could not create different Report region even i don’t want create another page due to the further functionality issue.
Thanx,
RamI'm glad you could apply that approach. I'm not crystal clear on what is needed but I have a few general ideas.
1) If there will only have 3 or 4 classes (types) of users, you might try using a CASE statement in a Before Header process:
BEGIN;
CASE
WHEN condition for 'KAC' THEN
SELECT [first label constant or variable], [second label], ...
INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
WHEN condition for 'MIS' THEN
SELECT [first label constant or variable], [second label], ...
INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
WHEN condition for "ADMIN" THEN
SELECT [first ADMIN label constant], [second ADMIN label constant], ...
INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
ELSE -- default case
SELECT [default first label constant or variable],
[default second label constant or variable], ...
INTO &Px_COL_HEAD1., &Px_COL_HEAD2, ... FROM ... ;
END;
END; NOTE: Do not make the "ADMIN" case the default. That seems like a security hole. I would always want a data check for the ADMIN case.
2) Or put the above code in an Application Process rather than a Page (Before Header) Process so it's only computed once.
Does that give you some ideas?
Regards,
Howard -
Hi All,
We have most of our report outputs as Excel.
Our client is expecting a common format for outputs in excel, with header, margins, page breaks , page numbers
And some of our reports has more than 70 columns
Using RTF, we could not able to manage this. the header or page breaks are being overwritten when it generated the excel outputs.
Please let me know how to achive this.
Thanks in advance
Edited by: DharV on Oct 15, 2012 8:44 PMHi Rohit ,
I had copied these .class & .xml files under Myclasses -> oracle.apps.icx and oracle.apps.po and oracle.apps.fnd was same which comes part of the standard OA tutorial.
I copied same under Myprojects as well.
you have to decompile the class file into java file and then place it in Myproject directory , also copy all dependency files like BC4J components , and then
try to run from Jdeveloper .
Alternatively you can get the entire ICX folder and zip it and add it via library .
--Keerthi -
With header line & with out header line ?
what is difference between with header line & without header line ?
When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b> -
How to include a Header in Hierarchy List (ALV)?
Hi Gurus,
If we need to include any header in ALV Grid, then we generate an event and pass that header to TOP_OF_PAGE event. We do have I_CALLBACK_TOP_OF_PAGE parameter for the REUSE_ALV_GRID_DISPLAY function module.
But how do I generate a Header for a Hierarchy List? I do not find any parameter for TOP_OF_PAGE event. Please help with inputs.
Regards,
KiranHi Kiran,
The following codes are very useful to you...
If any problem let me know...
REPORT zxxxxxxxxxxxxxx LINE-SIZE 220
LINE-COUNT 50(5).
*& DATA DECLARATION *
TABLES: MARA, "GENERAL MASTER DATA
MARC, "PLANT DATA FOR MATERIAL
MARD, "STORAGE LOCATION DATA FOR MATERIAL
MBEW, "MATERIAL VALUATION
MVKE, "SALES DATA FOR MATERIAL
MAKT, "MATERIAL DESCRIPTION
EKKO, "PURCHASING DOCUMENT HEADER
EKPO, "PURCHASING DOCUMENT ITEM
VBAK, "SALES DOCUMENT HEADER DATA
VBAP. "SALES DOCUMENT ITEM DATA
TYPE-POOLS : SLIS.
DATA: VT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
V_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
V_LAYOUT TYPE SLIS_LAYOUT_ALV,
BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
BEGIN OF I_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, "MATERIAL NUMBER
MBRSH LIKE MARA-MBRSH, "INDUSTRY SECTOR
MEINS LIKE MARA-MEINS, "BASE UNIT OF MEASURE
MATKL LIKE MARA-MATKL, "MATERIAL GROUP
END OF I_MARA,
BEGIN OF I_MARC OCCURS 0,
MATNR LIKE MARC-MATNR, "MATERIAL NUMBER
WERKS LIKE MARC-WERKS, "PLANT
LVORM LIKE MARC-LVORM, "FLAG MATERIAL FOR DELETION AT PLANT
"LEVEL
DISPO LIKE MARC-DISPO, "MRP CONTROLLER
END OF I_MARC,
BEGIN OF I_MAKT OCCURS 0,
MATNR LIKE MAKT-MATNR, "MATERIAL NUMBER
MAKTX LIKE MAKT-MAKTX, "MATERIAL DESCRIPTION
SPRAS LIKE MAKT-SPRAS, "LANGUAGE KEY
END OF I_MAKT,
BEGIN OF I_MVKE OCCURS 0,
MATNR LIKE MVKE-MATNR, "MATERIAL NUMBER
VKORG LIKE MVKE-VKORG, "SALES ORGANIZATION
VTWEG LIKE MVKE-VTWEG, "DISTRIBUTION CHANNEL
END OF I_MVKE,
BEGIN OF I_MARD OCCURS 0,
MATNR LIKE MARD-MATNR, "MATERIAL NUMBER
LGORT LIKE MARD-LGORT, "STORAGE LOCATION
LABST LIKE MARD-LABST, "VALUATED STOCK WITH UNRESTRICTED USE
END OF I_MARD,
BEGIN OF I_EKPO OCCURS 0,
EBELN LIKE EKPO-EBELN, "PURCHASING DOCUMENT NUMBER
EBELP LIKE EKPO-EBELP, "ITEM NUMBER OF PURCHASING DOCUMENT
MATNR LIKE EKPO-MATNR, "MATERIAL NUMBER
END OF I_EKPO,
BEGIN OF I_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF I_VBAP,
BEGIN OF I_OUT OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS,
LVORM LIKE MARC-LVORM,
DISPO LIKE MARC-DISPO,
MBRSH LIKE MARA-MBRSH,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
VKORG LIKE MVKE-VKORG,
VTWEG LIKE MVKE-VTWEG,
SPRAS LIKE MAKT-SPRAS,
MAKTX LIKE MAKT-MAKTX,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
END OF I_OUT,
BEGIN OF I_HEADING OCCURS 0,
TEXT1(20),
TEXT2(20),
TEXT3(20),
TEXT4(20),
TEXT5(20),
TEXT6(20),
TEXT7(20),
TEXT8(20),
TEXT9(20),
TEXT10(20),
TEXT11(40),
TEXT12(20),
TEXT13(20),
TEXT14(20),
TEXT15(20),
TEXT16(20),
TEXT17(20),
END OF I_HEADING.
*& S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-100.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR. "OBLIGATORY.
PARAMETERS: P_WERKS LIKE MARC-WERKS. "OBLIGATORY.
SELECT-OPTIONS: S_LGORT FOR MARD-LGORT,
S_DISPO FOR MARC-DISPO,
S_EBELN FOR EKPO-EBELN .
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-101.
PARAMETERS : RB1 RADIOBUTTON GROUP G1,
RB2 RADIOBUTTON GROUP G1,
RB3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
*& S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
SELECT MATNR WERKS LVORM DISPO FROM MARC
INTO CORRESPONDING FIELDS OF TABLE I_MARC
WHERE MATNR IN S_MATNR
AND DISPO IN S_DISPO
AND WERKS = P_WERKS.
IF I_MARC[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARC'.
EXIT.
ENDIF.
PERFORM PURCHASEDATA_VALIDATION.
PERFORM SALESDATA_VALIDATION.
SELECT MATNR LGORT LABST FROM MARD INTO TABLE I_MARD
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND WERKS EQ P_WERKS
AND LGORT IN S_LGORT.
IF I_MARD[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MARD'.
EXIT.
ENDIF.
SELECT MATNR VKORG VTWEG FROM MVKE INTO TABLE I_MVKE
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
IF I_MVKE[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA AVAILABLE FROM MVKE'.
EXIT.
ENDIF.
LOOP AT I_MARC.
MOVE-CORRESPONDING I_MARC TO I_OUT.
CLEAR MARC.
SELECT SINGLE MATNR MBRSH MEINS MATKL FROM MARA
INTO CORRESPONDING FIELDS OF MARA
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MARA-MBRSH TO I_OUT-MBRSH,
MARA-MEINS TO I_OUT-MEINS,
MARA-MATKL TO I_OUT-MATKL.
ELSE.
CONTINUE.
ENDIF.
SELECT SINGLE MATNR MAKTX SPRAS FROM MAKT
INTO CORRESPONDING FIELDS OF MAKT
WHERE MATNR = I_OUT-MATNR.
IF SY-SUBRC = 0.
MOVE: MAKT-MAKTX TO I_OUT-MAKTX,
MAKT-SPRAS TO I_OUT-SPRAS.
ELSE.
CONTINUE.
ENDIF.
LOOP AT I_EKPO WHERE MATNR = I_MARC-MATNR.
MOVE: I_EKPO-EBELN TO I_OUT-EBELN,
I_EKPO-EBELP TO I_OUT-EBELP.
ENDLOOP.
LOOP AT I_VBAP WHERE MATNR = I_MARC-MATNR.
MOVE: I_VBAP-VBELN TO I_OUT-VBELN,
I_VBAP-POSNR TO I_OUT-POSNR.
ENDLOOP.
LOOP AT I_MARD WHERE MATNR = I_MARC-MATNR.
MOVE: I_MARD-LABST TO I_OUT-LABST,
I_MARD-LGORT TO I_OUT-LGORT.
ENDLOOP.
LOOP AT I_MVKE WHERE MATNR = I_MARC-MATNR.
MOVE: I_MVKE-VKORG TO I_OUT-VKORG,
I_MVKE-VTWEG TO I_OUT-VTWEG.
APPEND I_OUT.
ENDLOOP.
CLEAR I_OUT.
ENDLOOP.
PERFORM OPTIONS.
FORM OPTIONS *
FORM OPTIONS.
IF RB2 = 'X'.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ELSE.
IF RB1 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
ELSE.
IF RB3 = 'X'.
PERFORM HEADINGS.
PERFORM DLOAD.
PERFORM FIELDCAT.
PERFORM OUTPUT.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "OPTIONS
FORM HEADINGS *
FORM HEADINGS.
I_HEADING-TEXT1 = 'MATNR'.
I_HEADING-TEXT2 = 'WERKS'.
I_HEADING-TEXT3 = 'LVORM'.
I_HEADING-TEXT4 = 'DISPO'.
I_HEADING-TEXT5 = 'MBRSH'.
I_HEADING-TEXT6 = 'MEINS'.
I_HEADING-TEXT7 = 'MATKL'.
I_HEADING-TEXT8 = 'VKORG'.
I_HEADING-TEXT9 = 'VTWEG'.
I_HEADING-TEXT10 = 'SPRAS'.
I_HEADING-TEXT11 = 'MAKTX'.
I_HEADING-TEXT12 = 'LGORT'.
I_HEADING-TEXT13 = 'LABST'.
I_HEADING-TEXT14 = 'EBELN'.
I_HEADING-TEXT15 = 'EBELP'.
I_HEADING-TEXT16 = 'VBELN'.
I_HEADING-TEXT17 = 'POSNR'.
APPEND I_HEADING.
ENDFORM. "HEADINGS
FORM DLOAD *
FORM DLOAD.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_HEADING
EXCEPTIONS
FILE_WRITE_ERROR = 1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\MATSTK.XLS'
FILETYPE = 'DAT'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_OUT.
ENDFORM. "DLOAD
FORM FIELDCAT *
FORM FIELDCAT.
V_FIELDCAT-COL_POS = '1'.
V_FIELDCAT-FIELDNAME = 'MATNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'MATNR'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '2'.
V_FIELDCAT-FIELDNAME = 'WERKS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'WERKS'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '3'.
V_FIELDCAT-FIELDNAME = 'LVORM'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LVORM'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '4'.
V_FIELDCAT-FIELDNAME = 'DISPO'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'DISPO'.
V_FIELDCAT-REF_TABNAME = 'MARC'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '5'.
V_FIELDCAT-FIELDNAME = 'MBRSH'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MBRSH'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '6'.
V_FIELDCAT-FIELDNAME = 'MEINS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MEINS'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '7'.
V_FIELDCAT-FIELDNAME = 'MATKL'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MATKL'.
V_FIELDCAT-REF_TABNAME = 'MARA'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '8'.
V_FIELDCAT-FIELDNAME = 'VKORG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VKORG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '9'.
V_FIELDCAT-FIELDNAME = 'VTWEG'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'VTWEG'.
V_FIELDCAT-REF_TABNAME = 'MVKE'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '10'.
V_FIELDCAT-FIELDNAME = 'SPRAS'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'SPRAS'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '11'.
V_FIELDCAT-FIELDNAME = 'MAKTX'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'MAKTX'.
V_FIELDCAT-REF_TABNAME = 'MAKT'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '12'.
V_FIELDCAT-FIELDNAME = 'LGORT'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'LGORT'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-SELTEXT_L = 'STRG LOCT'.
V_FIELDCAT-OUTPUTLEN = 10.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '13'.
V_FIELDCAT-FIELDNAME = 'LABST'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-SELTEXT_M = 'STOCK'.
V_FIELDCAT-OUTPUTLEN = 15.
V_FIELDCAT-REF_FIELDNAME = 'LABST'.
V_FIELDCAT-REF_TABNAME = 'MARD'.
V_FIELDCAT-DO_SUM = 'X'.
V_LAYOUT-TOTALS_TEXT = 'TOTAL STOCK:'.
V_FIELDCAT-HOTSPOT = 'X'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '14'.
V_FIELDCAT-FIELDNAME = 'EBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'EBELN'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '15'.
V_FIELDCAT-FIELDNAME = 'EBELP'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'EBELP'.
V_FIELDCAT-REF_TABNAME = 'EKPO'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '16'.
V_FIELDCAT-FIELDNAME = 'VBELN'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-HOTSPOT = 'X'.
V_FIELDCAT-REF_FIELDNAME = 'VBELN'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
V_FIELDCAT-COL_POS = '17'.
V_FIELDCAT-FIELDNAME = 'POSNR'.
V_FIELDCAT-TABNAME = 'I_OUT'.
V_FIELDCAT-REF_FIELDNAME = 'POSNR'.
V_FIELDCAT-REF_TABNAME = 'VBAP'.
APPEND V_FIELDCAT TO VT_FIELDCAT1.
CLEAR V_FIELDCAT.
ENDFORM. "FIELDCAT
FORM OUTPUT *
FORM OUTPUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_GRID_TITLE = 'CLICK ON MATERIAL/PURDOC/SALESDOC FOR DETAILS'
I_CALLBACK_USER_COMMAND = 'DISPLAYDETAILS'
IS_LAYOUT = V_LAYOUT
IT_FIELDCAT = VT_FIELDCAT1
TABLES
T_OUTTAB = I_OUT.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. "OUTPUT
FORM TOP-OF-PAGE *
FORM TOP-OF-PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'REPORT FOR : '.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'MATERIAL DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'PURCHASE ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'S'.
WA_HEADER-INFO = 'SALES ORDER DETAILS'.
APPEND WA_HEADER TO T_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
I_LOGO = 'GEAR'
IT_LIST_COMMENTARY = T_HEADER.
ENDFORM. "TOP-OF-PAGE
*& FORM DISPLAYDETAILS *
FORM DISPLAYDETAILS USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
IF SELFIELD-FIELDNAME = 'EBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM PORECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'MATNR'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM MMRECDNG.
CLEAR BDCDATA[].
ENDIF.
ELSE.
IF SELFIELD-FIELDNAME = 'VBELN'.
IF UCOMM = '&IC1'.
READ TABLE I_OUT INDEX SELFIELD-TABINDEX.
PERFORM SALESRECDNG.
CLEAR BDCDATA[].
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "DISPLAYDETAILS
FORM PORECDNG *
FORM PORECDNG.
perform bdc_dynpro using 'SAPMM06E' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RM06E-BSTNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RM06E-BSTNR'
I_OUT-EBELN.
perform bdc_dynpro using 'SAPMM06E' '0120'.
perform bdc_field using 'BDC_CURSOR'
'RM06E-BSTPO(01)'.
perform bdc_field using 'BDC_OKCODE'
'=AH'.
perform bdc_field using 'RM06E-EBELP'
I_OUT-EBELP.
perform bdc_field using 'RM06E-TCSELFLAG(01)'
'X'.
perform bdc_transaction using 'ME23'.
ENDFORM. "PORECDNG
FORM MMRECDNG *
FORM MMRECDNG.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0060'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RMMG1-MATNR'
I_OUT-MATNR.
PERFORM BDC_DYNPRO USING 'SAPLMGMM' '0070'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'MSICHTAUSW-KZSEL(01)'
'X'.
PERFORM BDC_TRANSACTION USING 'MM03'.
ENDFORM. "MMRECDNG
FORM SALESRECDNG *
FORM SALESRECDNG.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'VBAK-VBELN'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'VBAK-VBELN'
I_OUT-VBELN.
PERFORM BDC_TRANSACTION USING 'VA03'.
ENDFORM. "SALESRECDNG
FORM BDC_TRANSACTION *
FORM BDC_TRANSACTION USING TCODE.
CALL TRANSACTION TCODE USING BDCDATA MODE 'E'.
ENDFORM. "BDC_TRANSACTION
FORM BDC_DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
INSERT FIELD *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM. "BDC_FIELD
*& FORM PURCHASEDATA_VALIDATION *
FORM PURCHASEDATA_VALIDATION.
SELECT EBELN EBELP MATNR
FROM EKPO
INTO TABLE I_EKPO
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR
AND EBELN IN S_EBELN
AND WERKS EQ P_WERKS.
IF I_EKPO[] IS INITIAL.
WRITE:/ 'NO MATCHING DATA IS SELECTED FROM TABLE EKPO'.
EXIT.
ENDIF.
DATA: T_EKPO LIKE I_EKPO OCCURS 0 WITH HEADER LINE.
T_EKPO[] = I_EKPO[].
REFRESH I_EKPO.
FREE I_EKPO.
LOOP AT T_EKPO.
SELECT SINGLE EBELN FROM EKKO INTO EKPO-EBELN
WHERE EBELN = T_EKPO-EBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_EKPO TO I_EKPO.
APPEND I_EKPO.
CLEAR I_EKPO.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_EKPO.
ENDFORM. "PURCHASEDATA_VALIDATION
*& FORM SALESDATA_VALIDATION *
FORM SALESDATA_VALIDATION.
SELECT VBELN POSNR MATNR
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE
I_VBAP FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
DATA: T_VBAP LIKE I_VBAP OCCURS 0 WITH HEADER LINE.
T_VBAP[] = I_VBAP[].
REFRESH I_VBAP.
FREE I_VBAP.
LOOP AT T_VBAP.
SELECT SINGLE VBELN FROM VBAK INTO VBAK-VBELN
WHERE VBELN = T_VBAP-VBELN.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T_VBAP TO I_VBAP.
APPEND I_VBAP.
CLEAR I_VBAP.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
SORT I_VBAP.
ENDFORM. "SALESDATA_VALIDATION
..........................FOr Hierarchy List...................
REPORT Zxxxxxxxxxx NO STANDARD PAGE HEADING.
**********DECLARING TABLES********************************************
TYPE-POOLS: slis.
TABLES: EKKO, "PO HEADER
EKPO. "PO ITEM
**********DECLARING DATA**********************************************
DATA: ET_EKKO TYPE EKKO OCCURS 0 WITH HEADER LINE,
ET_EKPO TYPE EKPO OCCURS 0 WITH HEADER LINE,
ET_SORT TYPE SLIS_T_SORTINFO_ALV WITH HEADER LINE,
ET_LAYOUT TYPE SLIS_LAYOUT_ALV,
ET_KEYINFO TYPE SLIS_KEYINFO_ALV,
ET_REPID LIKE SY-REPID.
DATA: ET_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
DATA: ET_EVENTS TYPE SLIS_T_EVENT.
**********SELECTION CRITERIA****************************************
SELECTION-SCREEN BEGIN OF BLOCK RAD1 WITH FRAME TITLE TEXT-003.
SELECT-OPTIONS: S_EBELN FOR ET_EKPO-EBELN OBLIGATORY.
SELECTION-SCREEN END OF BLOCK RAD1.
INITIALIZATION.
ET_KEYINFO-HEADER01 = 'EBELN'.
ET_KEYINFO-ITEM01 = 'EBELN'.
ET_SORT-FIELDNAME = 'EBELN'.
ET_SORT-TABNAME = '2'.
ET_SORT-SPOS = 1.
ET_SORT-UP = 'X'.
ET_SORT-SUBTOT = 'X'.
APPEND ET_SORT.
ET_SORT-FIELDNAME = 'EBELP'.
ET_SORT-TABNAME = '2'.
ET_SORT-SPOS = 1.
APPEND ET_SORT.
ET_FIELDCAT-FIELDNAME = 'NETWR'.
ET_FIELDCAT-TABNAME = '2'.
ET_FIELDCAT-OUTPUTLEN = 8.
ET_FIELDCAT-DO_SUM = 'X'.
ET_FIELDCAT-HOTSPOT = 'X'.
APPEND ET_FIELDCAT.
START-OF-SELECTION.
SELECT EBELN BUKRS AEDAT ERNAM FROM EKKO INTO CORRESPONDING
FIELDS OF TABLE ET_EKKO
WHERE EBELN IN S_EBELN.
SELECT * FROM EKPO INTO CORRESPONDING FIELDS
OF TABLE ET_EKPO FOR ALL ENTRIES IN
ET_EKKO WHERE EBELN = ET_EKKO-EBELN.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
I_STRUCTURE_NAME_HEADER = 'EKKO'
I_STRUCTURE_NAME_ITEM = 'EKPO'
IS_KEYINFO = ET_KEYINFO " The structure contains the
" header and item table
" field names which links the
" the two tables(shared key)
IS_LAYOUT = ET_LAYOUT
IT_FIELDCAT = ET_FIELDCAT[]
I_TABNAME_HEADER = '1' " Name of the internal table in the
" program containing the output data
" of the highest hierarchy level
I_TABNAME_ITEM = '2' " Name of the internal table in the
" program containing the output data
" of the highest hierarchy level
IT_EVENTS = ET_EVENTS[]
IT_SORT = ET_SORT[]
TABLES
T_OUTTAB_HEADER = ET_EKKO " Header table with data to be
" output
T_OUTTAB_ITEM = ET_EKPO. " Name of the internal table in
" the program containing the
" output data of the lowest
"hierarchy level.
Regards,,
Satya Kumar.. -
How to post a header using GUI_DOWNLOAD
hello:
i would like to ask one favor, i trying to download a fiel to a PC i am using the GUI_DOWNLOAD function when i sent the it_table to the function this works well , but now i need to sent the name of the colums for each colums, i sending a tables with the names of that colums but the function is sending an error.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = nombre
filetype = 'ASC'
confirm_overwrite = 'X'
TABLES
data_tab = t_itab2
fieldnames = t_fieldnames. HERE SEND THE ERROR MSG.
note: this file is gonna be download from ITS that why iam using the GUI_DOWNLOAD.
please does anybody knows how to send the names of the colums for one file using this function?
thanks a lot for you help.If you are using a newer system, then the GUI_DOWNLOAD funciton module does contain a TABLES parameter for fieldnames. Here is an example.
REPORT zrich_0001.
TYPES: BEGIN OF t_fldnames,
fldname(30) type c,
END OF t_fldnames.
DATA: ifldnm TYPE TABLE OF t_fldnames WITH HEADER LINE.
DATA: ispfli TYPE TABLE OF spfli.
SELECT * INTO TABLE ispfli FROM spfli.
ifldnm-fldname = 'Client'. append ifldnm.
ifldnm-fldname = 'Airline Code'. append ifldnm.
ifldnm-fldname = 'Flight Connection Number'. append ifldnm.
ifldnm-fldname = 'Country Key'. append ifldnm.
ifldnm-fldname = 'Departure city'. append ifldnm.
ifldnm-fldname = 'Departure airport'. append ifldnm.
ifldnm-fldname = 'Country Key'. append ifldnm.
ifldnm-fldname = 'Arrival city'. append ifldnm.
ifldnm-fldname = 'Destination airport'. append ifldnm.
ifldnm-fldname = 'Flight time'. append ifldnm.
ifldnm-fldname = 'Departure time'. append ifldnm.
ifldnm-fldname = 'Arrival time'. append ifldnm.
ifldnm-fldname = 'Distance'. append ifldnm.
ifldnm-fldname = 'Mass unit of distance (kms, miles)'. append ifldnm.
ifldnm-fldname = 'Flight type'. append ifldnm.
ifldnm-fldname = 'Arrival n day(s) later'. append ifldnm.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:/test.xls'
write_field_separator = 'X'
TABLES
data_tab = ispfli
fieldnames = ifldnm.
This parameter is not supported in a 46c system
Regards,
Rich Heilman -
How to print between head-Tags of a Portal component
Hello,
is it possible to print between the -Tags of the generated HTML-Code? I need to insert a JAVAScript between the tags.
Currently i am simply using the Writer-Object in the doContent() to print out the HTML-Code. But i found nothing how to access the head?
With best regards
Edited by: Björn Karpenstein on Aug 19, 2008 9:12 AMHi,
One way of doing this is by creating a new Servlet Responce in doContent method. This way you can set the head tag by yourself.
Here is the code:
// get the reference to the ServletResponse (exclusivly) and set the content type to HTML
ServletResponse sResponse = portalComponentRequest.getServletResponse(true);
sResponse.setContentType("text/html");
// get the reference to the PrintWriter
PrintWriter writer = sResponse.getWriter();
// write the HTML header
writer.write("<html><head></head><body>\n");
Check if this suites your requirement, if not let me know.
Regards,
Praveen Gudapati -
Passing an internal table WITH HEADER LINE to abap object
Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
Thanks.Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
report zrich_0001.
* CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
types: t_t001 type table of t001.
class-data: it001 type table of t001.
class-data: xt001 like line of it001.
class-methods: change_table
exporting ex_wt001 type t001
changing im_t001 type t_t001.
endclass.
data: w_t001 type t001.
data: a_t001 type table of t001 with header line.
start-of-selection.
select * into table a_t001 from t001.
call method lcl_app=>change_table
importing
ex_wt001 = w_t001
changing
im_t001 = a_t001[] .
check sy-subrc = 0.
* CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method change_table.
loop at im_t001 into xt001.
concatenate xt001-butxt 'Changed'
into xt001-butxt separated by space.
modify im_t001 from xt001.
endloop.
ex_wt001 = xt001.
endmethod.
endclass.
Regards,
Rich Heilman -
How to add a header to an InfoSpoke generated CSV
Hello everybody,
I would appreciate any suggestions on how to add a header line (with the field names) to the CSV-file generated by an InfoSpoke.
Thanks for your help.
Greetings,
Martinif I recall correctly, that "header line" you're looking for, gets created automatically as a 2nd file... you could use a macro to combine both files in Excel?
Maybe you are looking for
-
FILE TO IDOC SCENARIO-Receiver Business system ECC showing Red
HI In File-idoc scenario Business system showing red status in RWB .And i have given the role for the business system as application server and configure related integrated server . But the error in a RWB for the ping and self-test is as follow
-
Vertical lines, but only upon booting up
Hi, my problem occurs (for now) only when booting up my mac and only, when it has been turned off for a few hours. When I start up, about one third of my screen (right side) stays black, then has only vertical lines in different colours, then image s
-
Oracle claims that from a functional perspective, Oracle9i Real Application Clusters is equivalent to a single-instance database. I understand that it means exactly that. In a cluster of several servers, multiple Oracle 9i databases on the servers ar
-
How to view pictures from DVD as a slideshow
I hAve no idea how to view pictures on my Mac importing takes forever I just want to look at them as a slide show they are professional pictures how do I do this
-
Apple Q and Firefox > Quit Firefox do not work. The only thing that works is FORCE QUIT.