Help concerning web attacks and Photon

Hello,
I was recently on the Photon browser, and I went on a website that I thought seemed rather suspicious, but I didn't really think much of it at the time.
Later, I decided to look the same website up on the safeweb.norton.com site, and it said "Web Attack: Web Attack: Exploit Toolkit Website 25".
Now I'm actually quite scared. Is iOS capable of downloading a virus, Trojan, worm, etc. or is vulnerable to a web attack through Photon even though I have not jail broken my device? I feel like I need closure concerning this.
Thanks.

As long as you have not jailbroken your iPhone you have nothing to worry about.

Similar Messages

Bridge Help | Create web galleries and PDFs with Adobe Output Module

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/create-web-galleries-pdfs-adobe.html

Plug-ins that failed to load:
It seems to me that something is wrong with your install. Maybe you did clone a former mac to install on this one? or copies old stuff to the new one. Don't know, it seems easy and quick but I prefer always a new install using a new computer or switching to a new system upgrade.
Lightning effects shows to be 32 bit while I think to know that Photoshop CS5 and CS5.5 are both 64 bit, however Bridge was turned to 64 bit in the CS6 version but that should not mater for you to use both applications from the same install disk (or download?)
And variations is something I tried to find in CS6 but can't find it there. I had long forgotten this feature that presented different previews and you could switch to color corrections and brightness (not sure) while looking at the result in the previews.
So I think you have some old material residing on your system. I would advice you to back up all custom settings (actions, tools, workspaces etc. and keywords in Bridge) Then do a search for the Adobe Cleaner tool :
http://www.adobe.com/support/contact/cscleanertool.html?promoid=GYTAU
(don't know this links work for you but you can find it easy with google).
Read the instructions carefully and follow this using the official uninstaller that came with PS (see application folder). Also be sure to have your serial number and AdobeID present and while an activation of PS is for the computer maybe for security first deactivate before uninstall.

Help with web.xml and deploying a servlet

Hello,
I've been tearing me hair out for the last few hours trying to get this to work... I've got a servlet org.fatbaob.servtest.Servtest that I want to deploy with Tomcat 4.0.4. It doesn't seem to mater what I put in the web.xml file I'm always getting 404 errors.
The servlet is contained in a file c:\development\projects\servtest\WEB_INF\classes\org\fatboab\servtest\Servtest
which mapped with a <context> tag in the Tomcat conf\server.xml file:

<Context path="/servtest" docBase="C:\development\projects\servtest" debug="0" privileged="true" reloadable="true">
<Logger className="org.apache.catalina.logger.FileLogger" prefix="localhost_servtest_log." suffix=".txt" timestamp="true"/>
</Context>
My web.xml file contains:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>ServTest</servlet-name>
<servlet-class>org.fatboab.servtest.Servtest</servlet-class>
</servlet>
</web-app>
Although I have tried putting in <servlet-mapping> tags, but they didn't seem to work either.
My html file contains:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<title>Servlet Test</title>
</head>
<body>
<h1>Servlet Test</h1>
<form action="/servtest/servlet/org.fatboab.servtest.Servtest" method="post">
<table>
<tbody>
<tr>
<td>Name:</td>
<td><input type="text" size="77" name="name" /></td>
</tr>
<tr>
<td>Email:</td>
<td><input type="text" size="77" name="email" /></td>
</tr>
<tr>
<td colspan="2"><input type="submit" value="Submit" /></td>
</tr>
</tbody>
</table>
</form>
</body>
</html>
The 404 error I get is:
description The requested resource (/servtest/servlet/org.fatboab.servtest.Servtest) is not available.
Help!
Cheers,
Bob.

Hello,
I've been tearing me hair out for the last few hours
trying to get this to work... I've got a servlet
org.fatbaob.servtest.Servtest that I want to deploy
with Tomcat 4.0.4. It doesn't seem to mater what I put
in the web.xml file I'm always getting 404 errors.
The servlet is contained in a file
c:\development\projects\servtest\WEB_INF\classes\org\fa
boab\servtest\Servtest
which mapped with a <context> tag in the Tomcat
conf\server.xml file:

<Context path="/servtest"
docBase="C:\development\projects\servtest" debug="0"
privileged="true" reloadable="true">
<Logger
er className="org.apache.catalina.logger.FileLogger"
prefix="localhost_servtest_log." suffix=".txt"
timestamp="true"/>
</Context>
My web.xml file contains:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>ServTest</servlet-name>
<servlet-class>org.fatboab.servtest.Servtest</servlet-
lass>
</servlet>
</web-app>
Although I have tried putting in <servlet-mapping>
tags, but they didn't seem to work either.
My html file contains:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN"
"http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xml:lang="en">
<head>
<title>Servlet Test</title>
</head>
<body>
<h1>Servlet Test</h1>
<form
action="/servtest/servlet/org.fatboab.servtest.Servtest
method="post">
<table>
<tbody>
<tr>
<td>Name:</td>
<td><input type="text" size="77" name="name"
="name" /></td>
</tr>
<tr>
<td>Email:</td>
<td><input type="text" size="77" name="email"
"email" /></td>
</tr>
<tr>
<td colspan="2"><input type="submit"
submit" value="Submit" /></td>
</tr>
</tbody>
</table>
</form>
</body>
</html>
The 404 error I get is:
description The requested resource
(/servtest/servlet/org.fatboab.servtest.Servtest) is
not available.
Help!
Cheers,
Bob.Bob,
Here an servlet definition I have defined in my web.xml...just plug in your values.
<servlet>
<servlet-name>AutoUpload</servlet-name>
<servlet-class>com.lendleaserei.webservices.AutoUpload</servlet-class>
<display-name></display-name>
<description></description>
</servlet>
<servlet-mapping>
<url-pattern>/webs</url-pattern>
<servlet-name>com.lendleaserei.webservices.AutoUpload</servlet-name>
</servlet-mapping>
Hope this helps,
Marco

Help with Web Service and Action Script

Hi! I have a Web Service to which I should pass multiple
parameters. I would like to implement it completely in Action
Script for studing. What's happening is that in the call I pass 3
parameters and the soap message created is repeating the first
parameter. Let me explain better:
Here is the declaration of the webService:
quote:
<mx:WebService
id="ws"
wsdl="
http://127.0.0.1:8080/WS1/pessoaService/pessoa.wsdl">
<mx:operation name="PesquisarPessoa">
<mx:request>
<PesquisarPessoaRequest>
<id>{fieldId0.text}</id>
<nome>{fieldNome0.text}</nome>
<endereco>{fieldEndereco0.text}</endereco>
</PesquisarPessoaRequest>
</mx:request>
</mx:operation>
</mx:WebService>
Here is my action script which invokes the PesquisarPessoa
operation:
quote:
private function exibirAlterarRegistro():void {
ws.PesquisarPessoa(fieldId0.text, fieldNome0.text,
fieldEndereco0.text);
Here is the message catched by the web service (It repeats
the first parameter):
quote:
<SOAP-ENV:Body>
<schema:PesquisarPessoaRequest xmlns:schema="
http://www.example.org/Pessoa">
<schema:id>3</schema:id>
<schema:nome>3</schema:nome>
<schema:endereco>3</schema:endereco>
</schema:PesquisarPessoaRequest>
</SOAP-ENV:Body>
Thanks!

check the names of parameters published to the wsdl
file.

Have a new iPad with ios6. Will not send emails. Addresses are valid but get notice each time that recipient was rejected by the server. No help on web site, and Apple's only manual is for previous os version. We miss Steve Jobs.

Have a new IPad with IOS6. Will not send emails. Addresses are valid but get notice each time that "recipient was rejected by the server." Apple has apparently neglected to put out a manual with IOS6 and the previous manual has no indication of what to do. Really miss Steve Jobs.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Help needed with flash and web service call

Hi all,
I need some help with web services and flash. I'm very new to flash, so please have that in the back of your mind when reading this :-)
I've got a .swf file, and I would like to display a number received from a web service (using adobe flash professional cs5). Ive added the web service and provided the WSDL, but when i try to "Add Method Call", nothing happens. Why? What am I doing wrong?
Hope someone can help

start with the button that causes the text to be displayed. find what it does (which may not be easy because most templates are coded by novice or intermediate level coders) and follow that trail to the text. (note: the text may be in a txt or xml file that's loaded.)
to have a button release open a file, use:
yourbtn.onRelease=function(){
getURL("http://www.adobe.com");

How can I reset my Mac to default settings? Or how can I reset it to a prior date? My Mac has a virus and I would like to get rid of it. I would appreciate your help concerning this matter.

How can I reset my Mac to default settings? Or how can I reset it to a prior date? My Mac has a virus and I would like to get rid of it. I would appreciate your help concerning this matter.

To restore it follow these instructions: What to do before selling or giving away your Mac.
Before you do the above check out the following;
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

PLEASE HELP. How do you access properties files in WEB-INF and classes directory

We have a war file that needs to access properties files that are in the WEB-INF directory
of the war file. We also need to load one of the properties files from the classpath.
However, when we deploy the application ( an ear which inlcludes an ejbjar and a
war and the libraries both the ejbjar (with a manifest setting the classpath ) and
war need ) the properties don't get extracted.
In some of our servlets we are trying to access those files with the path "WEB-INF/foo.properties"
and we get a FileNotFoundException. Then we check and see that NO properties files
have been extracted into their appropriate places ( not even those we throw into
the WEB-INF/classes directory ).
PLEASE HELP,
Christian Hargraves

The file doesn't have to be extracted from the war. For example, you can place
test.properties into your app WEB-INF and write a simple JSP to see how it
works:
<%
InputStream in = application.getResourceAsStream("/WEB-INF/test.properties");
%>
It will return you a zip inputstream if you deployed your application as a .war.
Christian Hargraves <[email protected]> wrote:
I try this, but I get a NullPointerException. The file never actually gets extracted
from the war. Under tomcat and resin this works great ( that's why I am having all
of the trouble i am having ), but there are absolutely no properties files in the
extracted directories for WebLogic deploys. only:
WEB-INF/some_tmp_dir/WEB-INF/lib
and then some dynamically generated jor file with all of the classes that would normally
go in WEB-INF/classes ( all except the properties, of course, which are no where
to be found. ).
There has to be some kind of setting I am missing. Please don't make me seperate
these properties files from the war/ear and then put the path to these properties
files in the CLASSPATH, changing one step to three steps to deploy!!
I have found a documented bug where you can't even put the properties files in a
jar file and that bug will never be fixed for WebLogic 6.1.
"Dimitri I. Rakitine" <[email protected]> wrote:
To access files in WEB-INF you can use ServletContext.getResourceXXX("/WEB-INF/filename")
Christian Hargraves <[email protected]> wrote:
We have a war file that needs to access properties files that are in theWEB-INF directory
of the war file. We also need to load one of the properties files fromthe classpath.
However, when we deploy the application ( an ear which inlcludes an ejbjarand a
war and the libraries both the ejbjar (with a manifest setting the classpath) and
war need ) the properties don't get extracted.
In some of our servlets we are trying to access those files with the path"WEB-INF/foo.properties"
and we get a FileNotFoundException. Then we check and see that NO propertiesfiles
have been extracted into their appropriate places ( not even those wethrow into
the WEB-INF/classes directory ).
PLEASE HELP,
Christian Hargraves--
Dimitri
Dimitri

Fixed Layout ePub - please help me embed video and/or use Folio overlay with web content

Hi
I have an In Design file used to create a print book (11"x11") and have decided to use CC 2014 to create a fixed-layout ePub 3 for a digital version. I converted the book over with minor issues of having to change the font and it looks beautiful.
I would like to add videos at the end of the book to take advantage of the flexibility of the digital format. I create a year-end slideshow of my photos and host them on Vimeo.
I have tried the following:
Using the Vimeo standard embed code in an HTML element
Using the old flash Vimeo embed code and converting to HTML - worked great on iBooks on Mac but not on iPhone/iPad as flash-based
Hosting and linking to videos on my own web server and using the Media - insert video link to the mp4 file
Hosting and linking to videos on my old photo server at smugmug.com
I can embed the actual videos but, at their smallest size they increase the file size of the ePub from 78MB to 400MB...
I then thought I would use a Folio Overlay - Web Content.
The idea is to use this blank page on my website which would look for all intents and purposes like another white page in the book - 2012 Slideshow - Oren Photography
The overlay works in Folio Preview but not when exported as an ePub
Is this a limitation of the ePub format?
Any help/advice/suggestions on fixing this are greatly appreciated.
E

Thanks again Steve and Bill
My interest in embedding videos was largely to minimize the final file size and amount of space used on each person's device. I ended up following your advice about using Adobe Media Encoder to minimize the size of each slideshow but it still increased the final ePub from 65 MB to over 200 MB. And that was with video quality that was far inferior from what I could offer through an embed or, my final solution, a link out to my website.
I happen to be of the same thought as Bill that most people are now connected to the internet and would favor a smaller file with access to online content over a very large file. I would have liked to embed the videos and allow 720p quality inside the ePub over the link I ended up settling for.
E

Help, doc sent to me in web doc and receiver cant open

Hi,
New to Mac and havent quite worked out how to: edit a web doc and send as word doc as receiver cant open
Any help at all would be greatly appreciated
Michelle

You'll need to tell the whole story. Expand and explain what it is you are doing.

Now my fairy tail account is get back , but cannot attack and mix the puzzle ,can help me fixed it

Now my fairy tail account is get back , but cannot attack and mix the puzzle ,can help me fixed it

Hello, Alan.
Thank you for visiting Apple Support Communities.
Try forcing all applications to close and power cycle the device. Once this is done test to see if you can access and manage this game.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, try the steps in the article below. You may have to reach out to the developer of the application to report an issue.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Cheers,
Jason H

Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first. Can connect to web. And my windows computer connects fine to exchange server. What's going on?

Help? New iPad2 exchange email was working. Now won't download email and existing emails disappearing - newest disappearing first. Can connect to web. And my windows computer connects fine to exchange server. What's going on?

Actually all are affected, but i manage to solved it running Virtual test version to trace the issue and finally able to fix it. Thanks for asking.
IT Technician

Need help with configuring web root and root url URL

Hello Folks,
I have been trying for a while to the flex 4 tutorial which asks you to connect to a mysql database. I have been able to configure the DB but cannot figure out what my web root and root url should be. Is there a web service that needs to be deployed or started. Would it be the IP address of the database that I created ( I tried that ) . I get the idea that an apache service must be started somehow on my flex environment and then I must find the root of the apache server. I dont see an apache directory anywhere. I am finding this difficult to know where to begin.

Hi,
First you need to be running a web server on your computer something like wamp/mamp is usually the better choice as most people have had the best success with this server setup(and it has all the current services like php and myssql)
When you use the wizard the path to your webroot is usually whre you located the wamp/mamp install, for windows it maybe something like c:\wamp\www not 100% sure about macs but I think the 'www' folder on a mac is 'htdocs'.
your url is either http://localhost or http://127.0.0.1.
David.

Web Application and Java Application

Hello,
I have a standalone Java application and a web application (JSP/Servlets) that I would like integrate. The standalone app. should send some information to my web app (which is not a problem), but then the user can be at this web app. for a while and then once he sees something he likes here, he can select it which should take him BACK to the standalone application. My question is whether something like this is possible?
If so, then how do i do it.
Also the web app and the standalone app run to 2 separate machines and 2 different JVM's.
Any kind of help will be great.
Thanks

Well let me describe the scenario in detail
We have a standalone java application that is good to search for data across an enterprise database. We also have another application which is web based and uses jsp's and servlets and is good for displaying data in different ways, let's say different kind of graps. Now the user will typically search for something using the standalone application and once he finds what he is looking for, then he might say that he wants to graph the selected data using this web application. Now this part is not too difficult as the standalone app can simply POST the selected information to the web app and the web app can then plot the graph. However, the tricky part is that this web application has the capability to allow the user to select let's say a bar and then get additional info. on that bar. Now to get this additional info. the web app. must contact the standalone app and tell it what bar was selected to get the additional info.
so my concern is how does the web app contact the standalone app. or even KNOW about this web app. Also, RMI is pretty flaky and i would much rather use web services to accomplish it. If that is the only way to go that is.
Hope that helps.

Help concerning web attacks and Photon

Similar Messages

Maybe you are looking for