HELP ! Conditional Print

I need to produce a printed master/details report, which will contain boiler plate text in cases
where the number of detailed records retrieved will be less than one page e.g. if a normal page should
contain 5 detailed records and only 3 records were retrieved from the DB, a boiler plate text should be
printed for these two records. If you can send sample from the scott/tiger schema it will be great !
Regards
Teresa
PS
Please send a copy of your response to :
[email protected]
null

Similar Messages

Conditional printing

Post Author: kirsty
CA Forum: Formula
HiTrying to write formula for conditional printing defining a section,I have created a new section, right click on grey area on the left ofthe report and say insert section below.Went to Section Expert to define a formula for the 'Suppress' tick boxbut cannot get the right formula. I need to display jobnumber ifneeded if not suppress.programming has never been my best subject please help

Post Author: synapsevampire
CA Forum: Formula
If you'd bothered to read my post it stated make up data if need be. Your permissions certainly don't disallow that.
Saying radio button inventory doesn't really help us, post the field and it's type if you want help with code.
v361 took a good stab at it, but you're intentionally wasting yours and other people's time because you don't want to take the time to give examples or post specifics.
If you right click the field you wish to suppress and select format field->X2 next to suppress, you can palce the appropriate code there.
Good luck.
-k

Optimizing images for Help and Print/PDF

i'm struggling with how to optimize graphics so they look good in both Help and print/pdf output.
I use Snag-it to Capture and save as PNG 300 dpi.
I often put the images in Vision and add callouts and save as PNG.
From RH I generate a printed output (Word) which I convert to PDF.
So with all the programs an image goes through (snag-it > visio > RH > Word > PDF) i'm not always sure what the best settings are.
Does anyone have guidelines/suggestions ?
Thanks

I've had very good luck going from a SnagIt capture to Robohelp to Word to PDF. I add callouts directly in SnagIt to save myself a step and save the files as a 24-bit (True Color) PNG. The graphics are very legible in the WebHelp output, in the Word document, and in the printed PDF.
The only thing that doesn't work well, I've found, is when I reduce the size of a graphic in either SnagIt or Robohelp. Instead, to keep a graphic's dimensions manageable, I either shrink the s/w application window before I grab the screen, capture just a portion of the screen, or crop the screen shot in SnagIt.
What problems have you been encountering?

Please help my printer talk to my computer. An error message always occurs when I try to print and Firefox self-help has not fixed the problem. Please help me directly with fixing the issue. Thank you.

Please help my printer talk to my computer. An error message pops up whenever I try to print. I have tried the firefox self-help on this topic and it doesn't work. I need direct help with this problem.

message is: "an unknown error occurred while printing" with the yellow icon and exclamation point. this is all it says every time.

MacBook - Newbie: Need help on printing wirelessly to XP shared printer

MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peter

ccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy".

Help with Print Layout Designer

Hi all,
I'm not sure if I should post this here or not, I already posted it in the Business One Forum. Moderator(s) if this is not the proper place please delete it and let me know that it is not the appropriate venue.
I need some help with Print Layout Designer. I am running 2005A SP01, and my customer wants a modification to the Sales Backorder Report. They want to add the column "In Stock" to both the report as displayed on the screen and the printed document. The report rendered to the screen has the In Stock, but it is not checked as visible. I check it and In Stock shows up as designed. The part I am having problems with is the printed document. I opened the PLD from the Backorder Report, and saved it under a different name. I resized some of the columns in the repetitive area (header and data) to make room for the In Stock column. I CAN add the text field Instock as free text and enter "In Stock" as the content. I looked at the "backorder" column in the PLD, and it is a text field with the source System Variable and the variable is 109. I would assume that all I need to do in my added column is to set the source to System Variable and enter the variable number. That is the problem; I can't find the variable number for that column. I looked on the report rendered to the screen with system information on and the variable is "3 #000027825,OnHand". I looked at the Back Order column of the report rendered to the screen and the variable is "3 #000028725,OpenCreQty". I found a spreadsheet that is supposed to contain a list of system variables for 2007A, but the document type for this report is BRDR and that document type does not appear in the list of document types in that spreadsheet. I looked for a similar spreadsheet for 2005A SP01 but didn't find one. I DID find a document "How To Customize Printing Templates with the Print Layout Designer". According to that document, I should be able to get the system variable from the report rendered to the screen with System Information turned on. Can anyone help?
TIA,
Steve

I haven't dealt with this before so I can't be certain, but here are my thoughts.
The Backordered Qty is probably a calculated field, so that's why it's a system variable. The In Stock is a defined field, so you probably can use the file and field number, OITM, OnHand. I would look at maybe the stock number or description to see how those are setup on the form instead of the backordered qty field.

I need help with printing labels. please

I need help with printing labels. thanks in advance

Welcome to Apple Support Communities.
In Address Book, first select a name or group of names to print.
Then File, Print, select Style, Mailing Labels, then Layout to select a specific target label (such as an Avery number), or define your own...

Looking for help to print up sheet music of the songs and chords

Hi everyone. This is my first post. I just got a new imac a few months ago. I am writing songs for garage band and would like to print them up with the chords, so basically home made sheet music. I am new to Macs and usually try this with a Microsoft word document but it moves the chords around so that they are out of sync with the lyrics. There must be a professional program or template I can use to do this either on a Mac or a pc. I would appreciate any help.

I did a quick google and found some Windows-based programs you could buy to do that, but nothing for the Mac.
However, you ought to be able to do it in word (I do when I have to print chords w/ lyrics to play with a group). You just have to fiddle with the space bar and tab to line up the chord changes with the lyrics.
It might be easier if you use a fixed-width font like Courier.

Helping w/printing issues

Hi,
I have some files that were recently sent to a professional printer.. I used Illustrator CS & InDesign CS to design my work... This is what the printer said (I have no idea what this means I've never had this issue before).
"We need you to set all the files that are printing 1 color as 1 color and shades / percentages of that 1 pms color . The reason I state all files because you will need to do this with upcoming files too . I just walked out of my pre press department and this is what they needed form you to make it work properly."
Any insight would be GREATLY appreciated!!!

OK, here's what it sounds like is happening.
You want your work to be printed in one color ink only, probably some color from the Pantone swatchbook. For whatever reason you've built some or all of your files using either RGB colors or CMYK process colors.
The single pigment inks are like paint, and are called SPOT colors. One printing plate is generated for each spot color, and you can use that color either at 100% or at some lighter tint percentage. If you want to pay the extra cost for additional plates and setup you can use more than one spot color in a job, and they can be mixed using 'overprint' to create other colors, like a yellow mixed with a blue can produce shades of green.
Spot colors only work on printing presses. Desktop printers and color copiers use CMYK inks or toners to simulate the appearance of the solid color, and often not terribly well since many spot colors are outside the range that can be produced using CMYK.
There are two ways to approach a one-color job. The first is to simply do it all in black, then tell the printer what color to use. Because there is only one plate involved it doesn't matter what color it is named or what it looks like on your screen. The output is determined by the color of the ink the printer loads into the press, and the same file can be printed in blue one day, and orange the next without doing anything more than changing the ink.
The other method is to actually specify a spot color by making a new color swatch and choosing the color form one of the predefined spot color libraries. The advantage of this is that it will appear on your screen in color, though not necessarily accurate color again, and you can print a proof on your desktop printer that will also be in some simulation of the color. If you do this, you must not use any other color in a one-color file, but you can make tint swatches of that color if it's convenient. Remember, the only way to accurately choose a spot color is with a swatchbook.
To see what is going to happen when the printer processes your file turn on the separations preview (Window > Output > Separations Preview and select separations from the dropdown at the top of the panel). Click the little eyeball icons to turn off all the colors, then turn them back on with only one visible at a time. If you've use a spot color, those things should show on screen in black when that color is showing, and not when other colors are showing. All of the other colors should leave the screen blank when selected alone for a one-color job. If you used black instead off a spot color, everything should be on the black plate.
Hope that helps.
Peter

Why is my page set up drop down different from your illustration in help for printing background

''duplicate - https://support.mozilla.com/en-US/questions/830795''
The page set up drop down menu looks nothing like the illustration in help. It does not include a box to check for "print background. How do I print background

first, does it sound like I set it up correctly from what I wrote?
Yes, all sounds correct.
Second, I heard that adding a b/g AX to the network will slow everything down to b/g speeds but I have also read that simply using B/G AX's to add speakers by joining the network will not slow down the N network....which is it?
The b/g AX devices will not slow down the network unless they are actively streaming AirTunes. Even then, audio streaming does not require a great deal of bandwidth, so for the most part, the effect would be negligible. Don't worry about it.
Is my network slowed down to b/g speeds because of my speaker set up or not?
The speed on your network will depend on a number of factors..are you downloading something while copying something else? Are you simply browsing? How far is the computer from the closest wireless access point?
You can check your current available bandwidth on your local network by doing the following:
Hold down the option key on your Mac while you click on the fan shaped AirPort icon at the top of the screen. Look for the Transmit Rate number.
"g" wireless = 54 Mbps
What do you see?
Oh, and by the way, I don't know if this matters, but while the time capsule serves as the main base station, it is in bridge mode because it is plugged into a 2wire gateway router.
If the Time Capsule is in bridge mode, it cannot act as the main base station. If you want, you could think of it that way if you are using the wireless on the Time Capsule as your preferred network, but the Time Capsule is not the "main" router.
Message was edited by: Bob Timmons

Need Help with Print a Report

Hi,
I am building a database application in Java and now i need to print some reports ....
I need to get the data from the database .. do some calculations , and then print in on paper.
I checked online and got some tools like JasperReports, jfreereports, ReportCat, etc. so I was wondering if somebody can suggest whats the best.
In my report I will have to print more than one table on one page.
for example:
if I have 4 Invoices. then i will have 4 tables .. one for each invoice.. and each table will contain
the elements for that Invoice.If all can't fit on one page then it needs to go next page.
I would like to do all this stuff in Java without using any reporting tool ... but I am not really sure how this can be
done .. can someone give me an idea ... as per how this can be done .. will really appriciate all the help.
Thanks in advance,
sandsouza

Hi,
Can somebody please help me with this.
Thanks in advance
sandsouza

Help on printing error messages to a log file

Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

noobboy,
Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

Need help: trouble printing a doc into a pdf

Hello
I can not take a word docx or any other format and convert it into a pdf format. When I click on printer, then pdf, hit ok - it gives me :
invalid "adobe pdf" printer properties: do not change spooler settings. Please selete "print directly to the printer" option (from adobe pdf printer properties "advanced" tab).
then it says windows cannot print due to a problem with the current printer setup
I have tried setting the 'print directly to printer' and it does nothing but along pause... no print
It used to work before now it stopped working and I don't know what happened
I am not sure where the problem is, I do not have a lot of knowledge when it comes to computers.
I do have an adobe reader 9.3 and an adobe acrobate 4.0
I am also using windows vista
Please help me! Thanks

There are forums I read that say there is a convert on the word dox program. Problem is that I am not always wanting to convert a word doc into a pdf. There are other programs I want to convert as well like .indd for example, which does not have a pdf coverter option in its program
I tried a live chat ... and they said they could not help me because they can only help version 10

Need help with printing edocs with a laserjet1320. Wont print large jobs. installed 10.7 update.Help

i am trying to print 50 page(5mb) document package on legal paper and the printer is printing one page at a time. I am using a macbook pro 10.7 and I have installed the update. however, it seems as though the computer is not correctly communicating with the printer. A four page job was no problem. I believe these printers are capable of high volume printing. Can I reinstall the firmware? Adobe acrobat will not even communicate with the printer. It just says "waiting for printer to become available." Using "preview", it sends the job to the printer, however, it is printing about 5pages per minute. It is connected through a usb cable. thanks for your help.
Randy

Randys714 welcome to the forum
Your laserjet1320 is a commercial product. I will suggest posting in the forum for HP Business Support as well for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Help on print button for interactive report

Hi,
I have created an interactive report and have also added a print button on the button of the report (unfortunately forgot how I did it). Say my column on the reports was Col_No, Col_First_name, Col_Last_name and a print button when I pressed a would get to choose open or save a pdf file, if I opened or saved it, I would had the same info on my pdf report as above.
Since I have changed the column order meaning I have Col_No, Col_Last_name, Col_Start_Date, Col_First_name and that is working fine but when I click on the print button I will get the pervious columns.
I noticed I have created a branches to print the report, basically after processing, when button was pressed an action with f?p=&APP_ID.:0:&SESSION.:PRINT_REPORT=6259824360775969936:&DEBUG.::: is present.
I need help to fix this and I do very much appreciate any help or suggestions
-regards
ahmadii

Found the answer, thanks.

HELP ! Conditional Print

Similar Messages

Maybe you are looking for