Help Connecting Nokia 3100 TO My Pc

Hello
I have Nokia 3100 And I want To Coonect My Mobile Phone To My Pc With An Ca53 Cable .
but it gives me ''Usb Device Not Recognized ''
What's the problem Can any Body Help me.
Thnx

3100 works only with CA-42, as per Nokia site.

Similar Messages

Nokia 3100/6610i Application Download "Unknown Error"

Hi Folks,
I am trying to download a 45 KB application on my Nokia 3100 and 6610i from server (Apache-JK2->Tomcat). Many times, i have found Unknown error in blank page during connecting to the server or installation of application. The JAD file settings are desired ones From forums.nokia i found that there might be problem with mime type setting in Apache or Tomcat. I described the mime type in both server for jar and jad file as specified in standard. But still the Unknown error occurs.
Also describing the network here as slow, lots of connectivity error happen like
1. Data Bearer not available
2. GPRS Connection time out
3. Connection time out, please try again.
Is there some error description document or reference available, whcih can provide a good description about such errors. Generally required during explanation to customers :)
Thanks for the reply
Alps

if you're getting that on a song download, see:
iTunes for Windows: Error (-50) or (403) occurs when accessing the iTunes Music Store
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators , or Firewalls

Connecting nokia 5800 to online ovi store via PC

Hi,
How can I connect nokia 5800 to online ovi store via PC. I do not have wi-fi and hence have to access online ovi store via PC Internet. Pls Help.
Thanks

Hi,
Can anybody here explain how do I download apps from Ovi store to my PC. I only see install or send link options in OVI store. How do I download the apps as an installable to my PC so that I could install the app in my mobile.
Any help will be much appreciated. Tons of apps in OVI store but I do not have wifi or gprs .
Thanks

Nokia 3100 phone problem

Hello. It was at least a week back when my mobile suddenly stopped responding, it's shut down permanently. When I had luck and entered my PIN code(and the mobile didnt crash), when I tried to make any entry into it ( such as numbers, sms's etc.), it crashed. Once I have written a short sms, but that's it.
Now the mobile won't even power on anymore. And if it does, I enter like 2 PIN numbers and that's it. The battery appears to be charged.
I dunno. People tell me it's because it's old, some suggest it has been frozen due to the weather.
Model: Nokia 3100
Age : 2 years
Battery: BR-5C 3.5V Li-ion
Any problems like these in past?: Nope
Any ''hardware tweaking''?: No!!
I was commonly using it for 2 years, I really don't know what is going on.
I bought a new battery today -
(BR-5C). Inserted it in and turned on, nothing. So I plugged the phone into a recharger, after 10 mins it beeped and started recharging.
So I turned on the phone again, and the same problem occurred - ''Insert PIN code'' , after pressing a button or two the phone won't respond anymore and shut itself down after good 10 seconds. It turned randomly off and on, too :/
It'll be great if you could help.

have u stored too many ringtones,wallpapers etc in ur Gallery?and is there is only little free phone memory?if yes then that's the reason for ur phones problem(i faced the same problem when i was Nokia 3120 user).........if this is not the case then i think that it is a software issue,go to Nokia Care they will fix it up 4 u....good luck.

Nokia 3100 problem

I have downloaded the games package, which comes with the Sun Wireless Toolkit 2.1, to my Nokia 3100 phone. I can�t open the games on my phone, the only option available is delete. I�m sure that my phone is compatible with Java2 but I can�t seem to get any programs to work. Does anyone know why they are not working? Thanks for your help.

The 3100 is a MIDP 1.0 phone.
I guess those games you tried downloading are MIDP 2.0 (since they were bundled with the WTK 2.1).
shmoove

Nokia 3100 speakerphone only problem

Hi, can anyone out there help me?
I have a nokia 3100 which for some reason has developed a problem (Probably pressed the wrong buttton)
When someone rings me, I eccept the call as usual but i cannot hear them unless i hit the loadspeaker button.. also the phone does not seem to want to go to voicemail when not answered..
The other thing.. there is a little graphic of a car on the screen, which I cannot get rid of... I presume its some kind of hands free thing.
I have tried to defualt the phone but nothing removes the icon or improves the situation...
Thanks for looking
Jim

The 3100 is a MIDP 1.0 phone.
I guess those games you tried downloading are MIDP 2.0 (since they were bundled with the WTK 2.1).
shmoove

Absolutely impossible to connect nokia phone in pc...

For me it's now absolutely impossible to connect nokia phone in pc suite mode. Not the first time for problems with PCsuite either. It has been working shaky for a couple of months but now it absolutely refuses connections in PC suite mode. USB connection are never any problem but I cannot sync the phone in this mode unfortunately so it does not help. Have tried all uninstallations and re-installations possible but nothing helps. Only a total re-install of the computer will probably help. WHY is PC suite such a unstable program! I think the concept is great and very nice but the connection part of this program simply have to be improved soon! Or make it possible to sync the data in USB mode to make the everything so much simpler.
/Peter
This time the problems happen with Windows XP and Nokia 6110N but it has been with all software versions, all Nokia phones I've had.

2630 Bluetooth. Can anyone suggest a step by step instruction "How to" to connect my Nokia 2630 to my PC through Bluetooth. I believe this is the only way to download my Nokia 2630 information.
Have to confess - as you can tell already - I'm a bit of luddite and very new to this. I don't know how Bluetooth technology works. Any suggestions would be greatly appreciated.Many thanks. Colin.

Customising a "Go To" menu on a Nokia 3100

I have got a Nokia 3100 and I am trying to customise the "Go To" menu so that it includes extra options of my choice. There is a facility to select or deselect the options that are already on the list, but few of them are ones that interest me. What I want to do is to add extra options to that list so that I can then select them to be added to the "Go To" menu.
Checking on p70 and p107 of the pdf User Guide refers to removing or adding more functions to the "Go To" menu but it restricts them to the ones on the specific list. There's no mention of adding new ones. Searching the Nokia knowledge database doesn't help as the words "Go" and "To" are automatically omitted from searches!
There MUST be a way to do it but I simply can't figure it out. Can you help?
Thanks

One more thing psychomania - I did not want to start a new post for this, so including it here
Is there any birthday alarm program for S60 similar to the S40 ones? In S60, I am forced to set birthdays as "Anniversaries", and even then if I forget to view them, they 'disappear'.. in S40 phones, they persisted on the screen until I clicked on OK. In other ways too, I find birthday reminder implementation of S40 much better. Is there any similarly capable S60 program?

PC wouldn't recognize my Nokia 3100

Hello
I have Nokia 3100 And I want To Coonect my Mobile Phone To my Pc With An Ca42 Cable .
downlaoded the PC Suite, and installed driver for cable. My PC has Windows XP SP2.
but when I'm conecting the phone, nothing happens, not even a massage ''Usb Device Not recognized''.
What's the problem?? Can any Body Help me?
Thnx

Hi sina_kks
Unfortunately you may have caused physical damage to the device by overheating if these reports are anything to go by:http://www.n82blog.com/2008/04/overheating-issues-on-n82.html
Happy to have helped forum in a small way with a Support Ratio = 37.0

Help! Nokia 8600 not working with my Ford audio bl...

I've got a problem connecting my Nokia 8600 Luna to the Ford Audio on my Ford S-Max 2006 via bluetooth. Whenever I try to bond between the two bluetooth products, I get a "Bonding Failed" message on the Ford CD player display and "unable to bond to bluetooth device" on the phone.
I've asked around some Ford S-Max forums and I'm told that I may need to wait for a Nokia Firmware update for the 8600 and keep my fingers crossed that this will contain and update which will make the two devices compatible. Is this true? Its very frustrating as I have an old Nokia 6230 which works fine on the Ford Audio and I have to switch to using this on long drives! The bluetooth on the smax was an expensive option and the Nokia 8600 ain't cheap either and now I feel like they've both been a waste of money! Please help me Nokia community.

I don't know whether a firmware upgrade would help. You were lucky with the 6230, it had excellent compatibility with a wide variety of car kits. The 8600 is compatible with relatively few.
Ford are factory-fitting some cars with a car kit developed on their behalf by Nokia - if yours is this system, then a list of compatible phones is on the web site (I can't give you a direct link because they use flash presentation pages in the web site, but start here: http://www.nokia.co.uk/A4221246 and work your way through car > car integration > Ford.
The problem with factory-fit car kits is that the car manufacturers get one of the phone/car kit manufacturers to develop kits for them, but they usually don't maintain the relationship so the car kit falls behind as new phones are developed.

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Need help connecting my iPhone 6 to my MacBook Pro to stream the internet

Turn on Personal Hotspot on your iPhone, select WiFi, set a password. Then select your hotspot on your MacBook Pro and sign in.

How to run our own jar files on Nokia 3100

Hi,
I am new to J2me.
I have written an J2me application using CLDC1.1
and MIDP 2.0 it works well on emulator but
when i tried to run it on device(Nokia 3100) it displays an error "Invalid File"
please answer my question as soon as possible

Look at this link http://www.j2mepolish.org/devices/Nokia/3100.html and check to see if you aren't using some API which is not supported by your Nokia 3100 phone, or if the jar size is to big, stuff like that.
Also, use a Nokia emulator for the Series 40 to test and see if it works.
Mihai

Help connecting wireless printer

I have a hp deskjet 3510 i had it prviuosly hooked up to an old router and old computer and never had any issues .. now i have moved hve a new router and new hp computer and i can not get my printer to print at all I have tried to connect it using the wifi protected setup pressed the button on the router and the printer just says it timed out tried the pin too .. nothing ...tried usb ... nada even tried the disk that came with printer cant use it cause now i have windows 8 .. lastley went on hp website and downloaded something that didnt work .. finally figured id use eprint and that still dosnt work screen pops up on computer that says printer needs your attention go to desktop ... i know theres nothing wrong with printer because i can print using phone or ipad ...PLEASE HELP

Hi @jfontana33,
Welcome to the HP Forums!
I see that you are needing help connecting your HP Deskjet 3510 to your wireless network running Windows 8. I am happy to help!
I would recommend to take a look through this guide on printing. Print Jobs are Stuck in the Print Queue.
Hope this guide helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Help Connecting Nokia 3100 TO My Pc

Similar Messages

Maybe you are looking for