Help - Create flash files with personalized text

Hi,
I have a flash file on my website. I want the users to enter
their personalized text to include in the flash file, which they
can download. Bascially, it is similar to ecard system where an
user can enter message to personalize the cards. Can someone tell
me how I can achieve this? Any suggestion is much appreciated.
T
P.S. I have cross-posted this in the ActionScript forum
because I don't know where the best forum for this topic should
be.

Similar Messages

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

How to create pdf files with text field data

how to create pdf files with text field data

That looks like it should work, but it doesn't.
I opened the PDF I had created from Word in Acrobat (X Pro). Went to File > Properties. Selected "Change Settings". I then enabled "Restrict editing...", set a password, set "Printing Allowed" to "none", "Changes Allowed" to "none", and ensured that "Enable copying of text..." was disabled.
I saved the PDF file, closed Acrobat, opened the PDF in Reader, and I was still able to select text and graphical objects.
I reopened the PDF in Acrobat, and the document summart still shows everything as allowed. When I click on "show details" (from File > Properties) it shows the correct settings.
Any ideas?

Flash files with right click imported in dreamweaver files

Flash files created with Captivate which contain rightclick
functionality are imported to html files created in Dreamweaver. In
other words, I don't use the html created by Captivate but another
html file to build up a whole course. But now a couple of those
flash files contain a right click and obviously I have to adjust
the dreamweaver file with some of the script that William Heinz has
created. I am not an HTML expert and I am not 100% confident that I
can do with just endless try&error. Could anyone give me some
hints?
I suppose I need to use the second bit of William's article
"the more complex requirement".
When I insert the flash file this is what I get: (This is
where I am suppose to make the changes????)
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0','widt h','746','height','591','title','Schedule
Let
Me','vspace','5','src','Resources/Sched_LM_skin','quality','high','pluginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movi e','Resources/Sched_LM_skin'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0"
width="746" height="591" vspace="5" title="Schedule Let Me">
<param name="movie" value="Resources/Sched_LM_skin.swf"
/>
<param name="quality" value="high" />
<embed src="Resources/Sched_LM_skin.swf" width="746"
height="591" vspace="5" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash"></embed>
</object></noscript>
I am not sure what to do with the "<Body
onload='javascript:init()..... "etc as suggested by William.
Thanks for any advice on this!!!

I hope there is one person out there who can help me with
this issue.
I have started from scratch and created a blank html with
dreamweaver and inserted the flash file (with right click
animation) created with Captivate.
Then I made the adjustments as per Heinz and also included a
ID=Captivate1 as the RightClick.js refers to that.
The main difference between this html file and the html file
created with Captivate, is that the Captivate one also has
writedocument bit.
Anyway, is there anybody in the world who can give me
atip/hint/suggestion?????

Save a copy of an open .ai file as a pdf file with personal preset

Hi all,
I am currently working on the schematics of a quite big document and I am using Illustrator. I work on the .ai version of the figures but I want to save them in a very quick way as pdf files with personal setting (super compression, no preview...). What I am doing now is that I have my .ai file open, and when I want to save a pdf version of it I go to "File" then "Save a copy" then "Type: pdf" and I enter a name, I click on "Save" and a window pops up with some options. Here, I select a personal preset and then click on "Save pdf" and I am happy with the final saved pdf. The thing is that it is a quite long process when you have to do it several times per figure. I tried to automatized it through a script (or action) but the available options are quite limited (it is hard to make Illustrator understand that if the current file is myfig.ai, I want a myfig.pdf and that I want to save it in the working folder). Under "File", I also tried the "SaveDocsAsPdf" script but once again, I have to select the folder where I want to save the figure and so on. Maybe I missed something. I'd be happy to hear that there is a very efficient way to save my figures as pdf by clicking a the F9 key (for instance).
Thank you for your help

I somehow found a technique that helps. It is kinda stupidly simple. Instead of working on the .ai file in Illustrator to finally save a pdf, I work this other way around. It goes much faster. I just have to hit ctrl+s to test how the created figure is included in the final document instead of all this very long process. When I am happy, I save an .ai version for further modifications later of necessary.

How do I get rid of the flashing file with a question mark in it?

I wanted to start clean on my MacBook Pro osx 10.9.4. So I did the command r and erased what I thought was the right one. I restarted my computer and did the command r again and what came up was internet recovery. It can't find my internet because it's WEP and I don't know to change it to wpa. So I restarted my computer again and I didn't do the command r but just let it load itself to see what would happen and all I get is a flashing file with a question mark. I don't know what to do. Someone please help me.

Do you get this display?
If so, you have to select an Internet connection. Do not expect quick response time in this mode. All activities in this mode will be lengthy.
Ciao.

Creating a file with content conversion

Hi all,
I have a scenario in XI which i create a file in it,
I want to create the file with the content conversion option but with no field separator.
I have an error message - "File adapter receiver channel is not initialized. Unable to proceed: null" if i don't use the fieldSeperator option.
I don't want to use this option, I want the file to be created without separators.
Thanks,
Naama

Hi Namma,
Go through very imp blogs:
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
File Receiver with Content Conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Thanks,
Satya Kumar

How to insert a shoutbox and a counter in a flash file with html code?

How to insert a shoutbox and a counter in a flash file with
html code?
Code shout box

<iframe src="
http://489676.myshoutbox.com/"
width="152" height="300" frameborder="0"
allowTransparency="true"></iframe>

Code compteur
<script type="text/javascript" src="
http://www.123compteur.com/counterskinable01.php?votre_id=268303"></script><noscript><a
href="
http://www.123compteur.com"
target="_blank">compteur</a></noscript>

thx =D

Importing flash files (with sound!) can it be done?

Hi!
I sucessfully importing a flash file but im not sure if the sound has imported with it, does anyone know if I can import a flash file with sounds or do I have to import the sound seperatly?
Helen

Helen,
After Effects can import .SWF files but unfortunately it does not recognize the audio in a .SWF file.
If it helps, AE can import .FLV files and it WILL recognize the audio in them.
Relevant Help page:
"Supported import formats"
-Troy

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it?

I've got a 15" white macbook which I bought about 2 years ago. It froze the other day and wouldn't respond so I shut it down. When I turn it on now it comes up with a flashing file with a question mark on it. How can I fix it? I've tried a few things i've seen online but the futhest ive got is to put the start up disk in when you makes it go to a grey screen with an apple logo and the spinning wheel which then stops spinning. Can anybody help?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once.It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left handlist. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

How do I save stock footage as flash file with transparent background?

Hi
I have some stock footage of smoke on a black background (.mov format) that I would like to convert to a flash file with a transparent background, which I will be overlaying over a PNG image on a webpage.
I have managed to remove the black background in After Effects using a plugin called UnMult, but when I try to render as a FLV file in AE, even though I check the option to preserve the alpha channel and encode using the On2 VP6 codec, I still get a black background.
So I am wondering what else to try, whether it be with AE or Flash CS4. Is there a way of achieving this effect by directly importing the MOV file into Flash CS4 and removing the black background there, or do I have to use AE, and if so, how to achieve the effect I am looking for?
I would be grateful for any help in getting this together
Thanks
Nick

You can put the video file in a movie clip and change it's
blending in the properties panel to multiply or screen.
Emil Georgiev - Flash and Web Design

Web browser for running locally saved html file with Marquee Text

I have a html file contain Marquee text.
I want to display that html file in oracle forms(10g).
I already use simple html browser but it does not support marquee text.
I already tried to convert the html file into Gif file but Marquee text not appear in gif file.
Is there any browser which support the locally saved html file with marquee text and also it can be embedded in oracle form.
Or is there any way for display that html file within the oracle forms.
Remember I don't want to display that file in separate window.I want to display that html file within the form.
Regards

Actually that is what I was doing last night and got a bad flash and bricked my router..so its on its way back to Linksys...

Re: to create outbound file with multiple header ,detail and trailor in informatica

Dear Mohan Prakash, Please mentation The Target Which Format you need. Please let me know. Thanks & RegardsKasireddy+966545281845

hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file

How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?

How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?

Reader doesn't have editing capabilities.

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

Help - Create flash files with personalized text

Similar Messages

Maybe you are looking for