Help! Entire body content missing in IE6
Hi, this is my first post to the forums
I'm fairly new to CSS, so please bear that in mind... All was
well until customer called to say his business associate, who uses
IE6, can't view the site. She told him the brower just "freezes"
when she goes to the site. I found an old PC computer here that has
IE6 and it doesn't look to me like it freezes, but the whole center
body section of each page just does not appear! (Also a transparent
PNG "sparkle" graphic does not display properly, but I can live
with that.)
Developing on a Mac with FF2.0.0.14 and Safari 3.1.1, and PC
laptop with IE7 (7.0.5730.11)
Site is www.foamrun.com
CSS file is here:
http://www.foamrun.com/css/foamrun-rollout.css
Can anyone tell me how to fix this? I'm so new at css I don't
even know where to start looking. :-(
K
First, the Sparkle images are transparent pngs which are not
supported in
pre-IE7 browsers. To use transparent png images, you should
insert the
pngfix.js into all your pages. Note: it doesn't work on
background images.
http://homepage.ntlworld.com/bobosola/pnghowto.htm
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"kduprey" <[email protected]> wrote in
message
news:g43fn2$j2o$[email protected]..
> Hi, this is my first post to the forums
>
> I'm fairly new to CSS, so please bear that in mind...
All was well until
> customer called to say his business associate, who uses
IE6, can't view
the
> site. She told him the brower just "freezes" when she
goes to the site. I
> found an old PC computer here that has IE6 and it
doesn't look to me like
it
> freezes, but the whole center body section of each page
just does not
appear!
> (Also a transparent PNG "sparkle" graphic does not
display properly, but I
can
> live with that.)
>
> Developing on a Mac with FF2.0.0.14 and Safari 3.1.1,
and PC laptop with
IE7
> (7.0.5730.11)
>
> Site is www.foamrun.com
> CSS file is here:
http://www.foamrun.com/css/foamrun-rollout.css
>
> Can anyone tell me how to fix this? I'm so new at css I
don't even know
where
> to start looking. :-(
>
> K
>
Similar Messages
-
Please help - entire library is missing
Hello guys,
I am currently experiencing some problems with iTunes, I hope someone can help me. After not having used my PC since September, I accessed it yesterday. After installing the iTunes update, everything was still normal, but after the computer had to be restarted for the HP update, ALL my media files are gone. Not only is the library wiped, the actual folder where the file should be is empty.
I will explain what I did below.
Also, please excuse my English, it's not my first language.
Okay, then let me explain my problem from the beginning. Maybe someone can tell me what I did wrong.
I am from Germany, but I am currently in the US as an exchange student. At home, I used a HP PC with Vista, but I decided to buy a little netbook (Asus eeePC)to take with me. The most important thing for me was (and still is) my music, my iTunes library. It is 86.4 GB big and consists of everything; songs, TV-shows, movies, apps, podcasts, audiobooks - you name it. In short, it's the result of years of listening to and collecting music; and it's not mine alone, the whole family uses it. I researched ways to copy my library unto my new netbook, but with a file that size, it's not that easy. Eventually, I decided to use a backup and re-create the library on the netbook. However, this did, for reasons unknown to me, not work, the backup was (from the 2nd disc on) unreadable. I created 2 more backups, tried to read them with different PCs - the same problem every time.
Finally, I had to leave without having accomplished anything. But I took my iPod touch with me, it had most of the files on it. I hoped that I could somehow transfer the files from my iPod. However, shortly after I arrived, it was stolen. I bought a new one, but of course all the files on it are gone.
In he meantime, my family at home created a new backup and send it to me - but this one, again, is not readable. Now I researched other possible ways on how to get my files over here. I decided to use a torrent this time. I had someone install a VNC client on my PC so I can access it from here, and then I installed utorrent and created a torrent from my entire library, send it to myself per e-mail and started downloading on my netbook. I was really happy to finally have found a way - but I should be wrong.
Since I had access to my iTunes after so much time, I decided to open iTunes and listen to a few songs. However, as my PC has not been used since I left in September, there were some available updates. Unsuspecting, I installed the new iTunes version and also a HP update. After the iTunes update everything was still okay, but after the PC had to be restarted for the HP update to work, my entire library was gone! And I checked, not only is the library empty, but the actual song-file is gone, meaning when I open, eg, "C:\Users\Chris\Music\iTunes\iTunes Music\Linkin Park\Meteora" the folder is totally empty.
That's how it is now. I decided not to do anything big, as I am afraid I'll mess it up even worse (though I don't think that's quite possible - there is nothing to mess up left, afterall).
Please please please, can somebody help me?If you don't have any other back up, and the torrent files you sent to yourself are gone, then your music is gone.
Nobody can help you recover data that no longer exists, but I can offer some sympathy. Sorry to read your story. -
When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.
Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!
-
Automator folder action won't run entire folder contents
Hi,
Ok, I think I'm pretty well versed in Automator and getting things to work. But this is just escaping me.
I've made a simple Photoshop Droplet (done this before). Open Automator, built a workflow for getting a folders contents and then opening the contents with the Droplet.
Saved this as a folder action,...
But when I drag multiple items to the folder, it only runs the very first item and stops,...
If I drag one by one into the folder it will work fine,....
I'm going to have to be dragging multiples all the time, it's a waste of time to do one by one,...
I'm totally missing something here,.... please help!!
I'd also like to move the contents of the folder, once the Droplet has run, to the trash
But first I have to get this darn thing to run on the entire folders contents,.....
Workflows I've tried:
1 - Open finder Items (open in my Droplet) works one at a time
2 - Get Specified Finder Items (point to my folder)
Get Folder Contents
Open finder Items (open in my Droplet) again, works one at a time
Thanks!!
ChristopherHi Curly, and a warm welcome to the forums!
I don't know much about Automator, and this may be of no help, but...
It's either just picking up/passing one variable, when it either needs an array of variables, or needs to loop back for the next one. -
To avoid the attachment for the body content while sending email from ABAP
SAP Version : 4.7
When i tried to send an external email from the abap report program, the body content of the mail is coming as an attachment for the same. I need to avoid this. Please give the suggestion. Am attaching the code.
DECLARATION PART *
TYPE-POOLS : SLIS.
TABLES : VBAK.
DECLARATION FOR ALV.
DATA : F_FIELD TYPE SLIS_T_FIELDCAT_ALV,
W_FIELD TYPE SLIS_FIELDCAT_ALV,
L_HEADER TYPE SLIS_T_LISTHEADER,
W_HEADER TYPE SLIS_LISTHEADER,
W_LAYOUT TYPE SLIS_LAYOUT_ALV,
t_sort type slis_t_sortinfo_alv,
w_sort type slis_sortinfo_alv.
TYPES : BEGIN OF T_VBAK,
VBELN LIKE VBAK-VBELN,
VKGRP LIKE VBAK-VKGRP,
KUNNR LIKE VBAK-KUNNR,
ERDAT LIKE VBAK-ERDAT,
VTWEG LIKE VBAK-VTWEG,
LIFSK LIKE VBAK-LIFSK,
VKBUR LIKE VBAK-VKBUR,
END OF T_VBAK.
TYPES : BEGIN OF T_VBAP,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
MATNR LIKE VBAP-MATNR,
WERKS LIKE VBAP-WERKS,
ARKTX LIKE VBAP-ARKTX,
KWMENG LIKE VBAP-KWMENG,
CUOBJ LIKE VBAP-CUOBJ,
NETWR LIKE VBAP-NETWR,
ZSCHL_K LIKE VBAP-ZSCHL_K,
KONDM LIKE VBAP-KONDM,
ZZURWN LIKE VBAP-ZZURWN,
END OF T_VBAP.
TYPES : BEGIN OF T_LIPS,
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
VGBEL LIKE LIPS-VGBEL,
VGPOS LIKE LIPS-VGPOS,
END OF T_LIPS.
TYPES : BEGIN OF T_KNA1,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
ADRNR LIKE KNA1-ADRNR,
END OF T_KNA1.
TYPES : BEGIN OF T_VBKD,
VBELN LIKE VBKD-VBELN,
POSNR LIKE VBKD-POSNR,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
KURSK LIKE VBKD-KURSK, " CURRENCY CHECK
BZIRK LIKE VBKD-BZIRK, " SALES DISTRICT
KDGRP LIKE VBKD-KDGRP,
IHREZ LIKE VBKD-IHREZ,
END OF T_VBKD.
TYPES : BEGIN OF T_LIKP,
VBELN LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
END OF T_LIKP.
TYPES : BEGIN OF T_ADR6,
ADDRNUMBER LIKE ADR6-ADDRNUMBER,
SMTP_ADDR LIKE ADR6-SMTP_ADDR,
END OF T_ADR6.
DATA : BEGIN OF IT_CUST OCCURS 0,
KUNNR LIKE VBAK-KUNNR,
END OF IT_CUST.
TYPES : BEGIN OF T_VBUP,
VBELN LIKE VBUP-VBELN,
POSNR LIKE VBUP-POSNR,
KOSTA LIKE VBUP-KOSTA,
WBSTA LIKE VBUP-WBSTA,
END OF T_VBUP.
TYPES : BEGIN OF T_TVLST,
LIFSP LIKE TVLST-LIFSP,
VTEXT LIKE TVLST-VTEXT,
END OF T_TVLST.
TYPES : BEGIN OF T_CONFIG.
INCLUDE STRUCTURE CONF_OUT.
TYPES : END OF T_CONFIG.
DATA : TMP LIKE VBAK-KUNNR.
DATA : NAME_TEXT LIKE THEAD-TDNAME.
DATA : TLINE1 LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : TMP_BRAKET LIKE CONF_OUT-ATWRT,
TMP_BRAKET1 LIKE CONF_OUT-ATWRT.
DATA : BEGIN OF IT_FINAL OCCURS 0,
WERKS LIKE VBAP-WERKS,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
KUNNR LIKE VBAK-KUNNR,
NAME1 LIKE KNA1-NAME1,
VBELN1 LIKE LIKP-VBELN,
ERDAT LIKE LIKP-ERDAT,
LIFSK LIKE VBAK-LIFSK,
ZZURWN LIKE VBAP-ZZURWN,
IHREZ LIKE VBKD-IHREZ,
ERDAT1 LIKE VBAK-ERDAT,
NETWR(25) type C,
BSTKD LIKE VBKD-BSTKD,
BSTDK LIKE VBKD-BSTDK,
SALORD(17) TYPE C,
PUMP_TYPE LIKE CONF_OUT-ATWRT,
PUMP_SIZE LIKE CONF_OUT-ATWRT,
VTEXT LIKE TVLST-VTEXT,
KWMENG(25) TYPE C,
FOOTER(330) TYPE C,
ITMTXT(330) TYPE C,
END OF IT_FINAL.
DATA : IT_VBAK TYPE STANDARD TABLE OF T_VBAK,
IT_VBAP TYPE STANDARD TABLE OF T_VBAP,
IT_VBKD TYPE STANDARD TABLE OF T_VBKD,
IT_LIKP TYPE STANDARD TABLE OF T_LIKP,
IT_LIPS TYPE STANDARD TABLE OF T_LIPS,
IT_VBUP TYPE STANDARD TABLE OF T_VBUP,
IT_KNA1 TYPE STANDARD TABLE OF T_KNA1,
IT_ADR6 TYPE STANDARD TABLE OF T_ADR6,
IT_FINAL1 LIKE IT_FINAL OCCURS 0 with header line,
IT_TVLST TYPE STANDARD TABLE OF T_TVLST,
IT_CONFIG TYPE STANDARD TABLE OF T_CONFIG,
W_VBAK TYPE T_VBAK,
W_VBAP TYPE T_VBAP,
W_VBKD TYPE T_VBKD,
W_LIKP TYPE T_LIKP,
W_ADR6 TYPE T_ADR6,
W_LIPS TYPE T_LIPS,
W_VBUP TYPE T_VBUP,
W_KNA1 TYPE T_KNA1,
W_TVLST TYPE T_TVLST,
W_CONFIG TYPE T_CONFIG.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
SELECTION-CRITERIA *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : R2 RADIOBUTTON GROUP G1 USER-COMMAND radio DEFAULT 'X',
R1 RADIOBUTTON GROUP G1 .
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-002.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
PARAMETERS : P_VTWEG LIKE W_VBAK-VTWEG ,
P_WERKS LIKE W_VBAP-WERKS.
select-options : s_vkgrp for w_vbak-vkgrp,
s_ERDAT for w_LIKP-ERDAT.
selection-screen end of block b2.
Initialization
INITIALIZATION.
s_vkgrp-sign = 'I'.
s_vkgrp-option = 'BT'.
s_vkgrp-low = '313'.
s_vkgrp-high = '324'.
APPEND s_vkgrp.
s_erdat-sign = 'I'.
s_erdat-option = 'BT'.
s_erdat-low = '20080108'.
s_erdat-high = '20080108'.
s_erdat-low = '20070101'.
s_erdat-high = sy-datum.
APPEND s_erdat.
selection-screen validations
AT SELECTION-SCREEN.
Validation for Plant.
IF p_werks NE '7210'.
MESSAGE : 'Plant entered should be 7210' TYPE 'E'.
ENDIF.
START OF SELECTION *
start-of-selection.
GETTING THE DATA FROM THE DATABASE TABLE
PERFORM DATA_FETCH.
FILLING THE FINAL INTERNAL TABLE
PERFORM FILL_FINAL.
GETTING THE LIST FOR SENDING MAIL OR DISPLAY.
IF R1 = 'X'.
Populate table with details to be entered into .xls file
LOOP AT IT_CUST.
PERFORM build_xls_data_table using it_cust-kunnr.
ENDLOOP.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
ELSEIF R2 = 'X'.
PERFORM LIST_DISPLAY.
ENDIF.
END OF SELECTION *
end-of-selection.
*& Form DATA_FETCH
text
--> p1 text
<-- p2 text
FORM DATA_FETCH .
SELECT VBELN
VKGRP
KUNNR
ERDAT
VTWEG
LIFSK
VKBUR
INTO TABLE IT_VBAK
FROM VBAK
WHERE VTWEG = P_VTWEG
AND VKGRP IN S_VKGRP
AND LIFSK NE ''.
IF IT_VBAK[] IS NOT INITIAL.
SELECT LIFSP
VTEXT
INTO TABLE IT_TVLST
FROM TVLST
FOR ALL ENTRIES IN IT_VBAK
WHERE LIFSP = IT_VBAK-LIFSK
AND SPRAS = 'EN'.
SELECT VBELN
POSNR
MATNR
WERKS
ARKTX
KWMENG
CUOBJ
NETWR
ZSCHL_K
KONDM
ZZURWN
INTO TABLE IT_VBAP
FROM VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN
AND WERKS = P_WERKS.
SELECT KUNNR
NAME1
ADRNR
INTO TABLE IT_KNA1
FROM KNA1
FOR ALL ENTRIES IN IT_VBAK
WHERE KUNNR = IT_VBAK-KUNNR.
SELECT VBELN
POSNR
BSTKD
BSTDK
KURSK
BZIRK
KDGRP
INTO TABLE IT_VBKD
FROM VBKD
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
IF IT_VBAP[] IS NOT INITIAL.
SELECT VBELN
POSNR
VGBEL
VGPOS
INTO TABLE IT_LIPS
FROM LIPS
FOR ALL ENTRIES IN IT_VBAP
WHERE VGBEL = IT_VBAP-VBELN
AND VGPOS = IT_VBAP-POSNR.
ENDIF.
IF IT_LIPS[] IS NOT INITIAL.
SELECT VBELN
ERDAT
INTO TABLE IT_LIKP
FROM LIKP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND ERDAT IN S_ERDAT.
SELECT VBELN
POSNR
KOSTA
WBSTA
INTO TABLE IT_VBUP
FROM VBUP
FOR ALL ENTRIES IN IT_LIPS
WHERE VBELN = IT_LIPS-VBELN
AND POSNR = IT_LIPS-POSNR
AND KOSTA EQ 'C'
AND WBSTA NE 'C'.
ENDIF.
IF IT_KNA1[] IS NOT INITIAL.
SELECT ADDRNUMBER
SMTP_ADDR
INTO TABLE IT_ADR6
FROM ADR6
FOR ALL ENTRIES IN IT_KNA1
WHERE ADDRNUMBER = IT_KNA1-ADRNR.
ENDIF.
ENDFORM. " DATA_FETCH
*& Form LIST_DISPLAY
text
--> p1 text
<-- p2 text
FORM LIST_DISPLAY .
REFRESH F_FIELD.
IF R2 = 'X'.
W_FIELD-col_pos = 1.
W_FIELD-fieldname = 'WERKS'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Plant'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 2.
W_FIELD-fieldname = 'VBELN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 3.
W_FIELD-fieldname = 'KUNNR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Code'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 4.
W_FIELD-fieldname = 'NAME1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer Name'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 5.
W_FIELD-fieldname = 'VBELN1'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Number'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 6.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Date'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 7.
W_FIELD-fieldname = 'LIFSK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 8.
W_FIELD-fieldname = 'PUMP_TYPE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Type'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 9.
W_FIELD-fieldname = 'PUMP_SIZE'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_l = 'Pump Size'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 10.
W_FIELD-fieldname = 'ZZURWN'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Pump Srno'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 11.
W_FIELD-fieldname = 'IHREZ'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Indent No.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 12.
W_FIELD-fieldname = 'ERDAT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Order Booking Dt'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 13.
W_FIELD-fieldname = 'NETWR'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Net Value'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 14.
W_FIELD-fieldname = 'KWMENG'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C710'.
W_FIELD-seltext_m = 'Qty'.
w_field-do_sum = 'X'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 15.
W_FIELD-fieldname = 'BSTKD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PONO'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 16.
W_FIELD-fieldname = 'BSTDK'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Customer PODT'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 17.
W_FIELD-fieldname = 'SALORD'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Sales Order/Item'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 18.
W_FIELD-fieldname = 'VTEXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Delivery Block Desc.'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 19.
W_FIELD-fieldname = 'FOOTER'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Footer Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
W_FIELD-col_pos = 20.
W_FIELD-fieldname = 'ITMTXT'.
W_FIELD-tabname = 'IT_FINAL'.
W_FIELD-emphasize = 'C410'.
W_FIELD-seltext_m = 'Item Text'.
APPEND W_FIELD TO F_FIELD.
CLEAR W_FIELD.
PERFORM SORT_FIELD.
PERFORM LAYOUT_DISPLAY.
PERFORM GRID_DISPLAY.
ENDIF.
ENDFORM. " LIST_DISPLAY
*& Form FILL_FINAL
text
--> p1 text
<-- p2 text
FORM FILL_FINAL .
REFRESH IT_FINAL.
LOOP AT IT_VBUP INTO W_VBUP.
READ TABLE IT_LIPS INTO W_LIPS WITH KEY VBELN = W_VBUP-VBELN POSNR = W_VBUP-POSNR.
READ TABLE IT_LIKP INTO W_LIKP WITH KEY VBELN = W_LIPS-VBELN.
IF SY-SUBRC EQ 0.
READ TABLE IT_VBAP INTO W_VBAP WITH KEY VBELN = W_LIPS-VGBEL POSNR = W_LIPS-VGPOS.
READ TABLE IT_VBAK INTO W_VBAK WITH KEY VBELN = W_VBAP-VBELN.
READ TABLE IT_VBKD INTO W_VBKD WITH KEY VBELN = W_VBAK-VBELN.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = W_VBAK-KUNNR.
READ TABLE IT_TVLST INTO W_TVLST WITH KEY LIFSP = W_VBAK-LIFSK.
IT_FINAL-WERKS = W_VBAP-WERKS.
IT_FINAL-VBELN = W_VBAP-VBELN.
IT_FINAL-KUNNR = W_VBAK-KUNNR.
IT_FINAL-NAME1 = W_KNA1-NAME1.
IT_FINAL-VBELN1 = W_LIKP-VBELN.
IT_FINAL-ERDAT = W_LIKP-ERDAT.
IT_FINAL-LIFSK = W_VBAK-LIFSK.
IT_FINAL-ZZURWN = W_VBAP-ZZURWN.
IT_FINAL-IHREZ = W_VBKD-IHREZ.
IT_FINAL-ERDAT1 = W_VBAK-ERDAT.
IT_FINAL-NETWR = W_VBAP-NETWR.
IT_FINAL-BSTKD = W_VBKD-BSTKD.
IT_FINAL-BSTDK = W_VBKD-BSTDK.
IT_FINAL-POSNR = W_VBAP-POSNR.
IT_FINAL-VTEXT = W_TVLST-VTEXT.
IT_FINAL-KWMENG = W_VBAP-KWMENG.
CONCATENATE W_VBAP-VBELN W_VBAP-POSNR INTO IT_FINAL-SALORD SEPARATED BY '/'.
IF W_VBAP-CUOBJ NE '000000000000000000'.
REFRESH IT_CONFIG.
CALL FUNCTION 'VC_I_GET_CONFIGURATION'
EXPORTING
INSTANCE = W_VBAP-CUOBJ
LANGUAGE = SY-LANGU
TABLES
CONFIGURATION = IT_CONFIG
EXCEPTIONS
INSTANCE_NOT_FOUND = 1
INTERNAL_ERROR = 2
NO_CLASS_ALLOCATION = 3
INSTANCE_NOT_VALID = 4
OTHERS = 5.
IF SY-SUBRC = 0.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_TYPE'.
IT_FINAL-PUMP_TYPE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
READ TABLE IT_CONFIG INTO W_CONFIG WITH KEY ATNAM = 'IN_PUMP_SIZE' .
IT_FINAL-PUMP_SIZE = W_CONFIG-ATWRT.
CLEAR W_CONFIG.
ENDIF.
ENDIF.
move w_vbap-vbeln to name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT1'
language = 'E'
name = name_text
object = 'VBBK'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-FOOTER TLINE1-TDLINE+0(65) INTO IT_FINAL-FOOTER.
CLEAR : TLINE1.
ENDLOOP.
clear : name_text,tline1[].
concatenate w_vbap-vbeln w_vbap-posnr into name_text.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'ZKT3'
language = 'E'
name = name_text
object = 'VBBP'
TABLES
lines = tline1
EXCEPTIONS
OTHERS = 8.
LOOP AT TLINE1.
CONCATENATE IT_FINAL-ITMTXT TLINE1-TDLINE+0(65) INTO IT_FINAL-ITMTXT.
CLEAR : TLINE1.
ENDLOOP.
APPEND IT_FINAL.
ENDIF.
CLEAR : IT_FINAL,W_VBAP,W_VBKD,W_VBUP,W_LIPS,W_LIKP,W_KNA1,W_VBAK,W_TVLST,name_text,tline1[].
ENDLOOP.
IT_FINAL1[] = IT_FINAL[].
SORT IT_FINAL1 BY KUNNR.
LOOP AT IT_FINAL1.
IF TMP NE IT_FINAL1-KUNNR.
IT_CUST-KUNNR = IT_FINAL1-KUNNR.
APPEND IT_CUST.
clear : tmp,it_cust.
TMP = IT_FINAL1-KUNNR.
ENDIF.
CLEAR : IT_FINAL1.
ENDLOOP.
ENDFORM. " FILL_FINAL
*& Form LAYOUT_DISPLAY
text
--> p1 text
<-- p2 text
FORM LAYOUT_DISPLAY .
W_LAYOUT-colwidth_optimize = 'X'.
ENDFORM. " LAYOUT_DISPLAY
*& Form GRID_DISPLAY
text
--> p1 text
<-- p2 text
FORM GRID_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = W_LAYOUT
IT_FIELDCAT = F_FIELD
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form SORT_FIELD
text
--> p1 text
<-- p2 text
FORM SORT_FIELD .
w_sort-spos = 1.
w_sort-fieldname = 'KUNNR'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
w_sort-spos = 2.
w_sort-fieldname = 'VBELN'.
w_sort-up = 'X'.
append w_sort to t_sort.
clear w_sort.
ENDFORM. " SORT_FIELD
*& Form TOP_OF_PAGE
text
FORM top_of_page.
IF R2 = 'X'.
REFRESH l_header.
w_header-typ = 'S'.
w_header-key = 'Delivery Block : '.
w_header-info = 'Outbound delivery created but not despatched'.
APPEND w_header TO l_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_header.
ENDIF.
ENDFORM. "TOP_OF_PAGE
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table using custcode.
CONSTANTS: con_cret TYPE X VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
data : it_custcode like vbak-kunnr.
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
clear : it_attach,it_attach[].
CONCATENATE 'Customer PONO' 'Customer PODT' 'Sales Order No' 'Item No'
'Pump Type' 'Pump Size' 'Order Value Rs' 'Delivery No.' 'Delivery Dt.'
'Quantity' 'Reasons for not getting Despatch'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
it_custcode = custcode.
CLEAR : W_KNA1,W_ADR6. "Code need to be added once testing is over.
READ TABLE IT_KNA1 INTO W_KNA1 WITH KEY KUNNR = IT_CUSTCODE.
READ TABLE IT_ADR6 INTO W_ADR6 WITH KEY ADDRNUMBER = W_KNA1-ADRNR.
P_EMAIL = W_ADR6-SMTP_ADDR.
LOOP AT it_final where kunnr = it_custcode.
CONCATENATE
IT_FINAL-BSTKD
IT_FINAL-BSTDK
IT_FINAL-VBELN
IT_FINAL-POSNR
IT_FINAL-PUMP_TYPE
IT_FINAL-PUMP_SIZE
IT_FINAL-NETWR
IT_FINAL-VBELN1
IT_FINAL-ERDAT
IT_FINAL-KWMENG
IT_FINAL-VTEXT
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
clear it_final.
ENDLOOP.
if R1 = 'X'.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'AWAITING DESPATCH CLEARANCE'
'XLS'
'Delivery_Block'
'Delivery_Blk'
'[email protected]'
'INT'
changing gd_error
gd_reciever.
endif.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR : w_doc_data,w_cnt.
DESCRIBE TABLE it_attach LINES w_cnt.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'We have manufactured the pump/s against your purchase order and regret to inform'.
APPEND it_message.
it_message = 'you that same cannot be despatched for the reason/s indicated below.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Please find the below attachment "Delivery_Blk.xls" for the details.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'We now request you to send the required detail/s by return mail/post to enable us '.
APPEND it_message.
it_message = 'to despatch the pump/s at the earliest.'.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = ' '.
APPEND it_message.
it_message = 'Best Regards'.
APPEND it_message.
it_message = 'O.E. ENGINEER'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODYHi,
Refer to the following piece of code. This is the simple code to send email with content and attachment.
Declaration
DATA: lwa_hd_change TYPE sood1,
lt_objcont TYPE STANDARD TABLE OF soli,
lwa_objcont TYPE soli,
lt_receivers TYPE STANDARD TABLE OF soos1,
lwa_receivers TYPE soos1 ,
lt_att_cont TYPE STANDARD TABLE OF soli,
lwa_att_cont TYPE soli,
lt_packing TYPE STANDARD TABLE OF soxpl,
lwa_packing TYPE soxpl,
lf_sent TYPE sonv-flag,
lf_size TYPE i.
CONSTANTS: lc_obj(11) TYPE c VALUE 'BOMSouthco',
lc_desc(20) TYPE c VALUE 'BOM Download',
lc_lang(1) TYPE c VALUE 'E',
lc_raw(3) TYPE c VALUE 'RAW',
lc_net(1) TYPE c VALUE 'U',
lc_mail(4) TYPE c VALUE 'MAIL',
lc_xls(3) TYPE c VALUE 'XLS',
lc_ext(3) TYPE c VALUE 'EXT'.
Passing values to the strutures used in SO_OBJECT_SEND function module
lwa_hd_change-objla = lc_lang.
lwa_hd_change-objnam = lc_obj.
lwa_hd_change-objdes = lc_desc.
lwa_hd_change-objlen = 255.
lwa_objcont-line = text-t29.
APPEND lwa_objcont TO lt_objcont.
CLEAR lwa_objcont.
lwa_receivers-recextnam = text-t31.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
lwa_receivers-recextnam = text-t30.
lwa_receivers-recesc = lc_net.
lwa_receivers-sndart = lc_mail.
lwa_receivers-sndex = 'X'.
lwa_receivers-sndpri = 1.
lwa_receivers-mailstatus = 'E'.
APPEND lwa_receivers TO lt_receivers.
CLEAR lwa_receivers.
Passing values for the attachment file
LOOP AT gt_output INTO gwa_output.
CONCATENATE gf_lf gwa_output-matnr gf_etb gwa_output-idnrk gf_etb
gwa_output-type gf_etb gwa_output-menge gf_etb
gwa_output-meins gf_etb gwa_output-comp gf_etb
INTO lwa_att_cont-line.
APPEND lwa_att_cont TO lt_att_cont.
CLEAR lwa_att_cont.
ENDLOOP.
CHECK lt_att_cont IS NOT INITIAL.
DESCRIBE TABLE lt_att_cont LINES lf_size.
lwa_packing-transf_bin = ' '.
lwa_packing-head_start = 1.
lwa_packing-head_num = 0.
lwa_packing-body_start = 1.
lwa_packing-body_num = lf_size.
lwa_packing-file_ext = lc_xls.
lwa_packing-objlen = lf_size * 255.
lwa_packing-objtp = lc_ext.
lwa_packing-objdes = lc_desc.
lwa_packing-objnam = lc_obj.
APPEND lwa_packing TO lt_packing.
CLEAR lwa_packing.
CHECK gf_error IS NOT INITIAL. "Check if unix file is written
FM to send email to the intended recipients
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = lwa_hd_change
object_type = lc_raw
IMPORTING
sent_to_all = lf_sent
TABLES
objcont = lt_objcont
receivers = lt_receivers
packing_list = lt_packing
att_cont = lt_att_cont
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
originator_not_exist = 20
x_error = 21
OTHERS = 22.
IF sy-subrc = 0.
MESSAGE s004 WITH text-t34.
ENDIF.
COMMIT WORK.
Reward if helpful.
Regards,
Ramya -
Replace complete SOAP body content by new string
Hi,
can anyone help me with the following problem - I need to replace body content of the SOAP message by a completly different one. I have this new content as a string which represents a part of XML document. I was thinking to configure replace action in this way (suppose that new content is stored in the variable $formatedMessage):
Replace [ node contents ] of [ undefined XPath ] in [ body ] with [ $formatedMessage/text() ]
... but this does not work :(
Many Thanks,
Paul1. use fn-bea:inlinexml() that convert string to xml dom.
2. replace $body/request in body with $myVar
Note: place some log action (eg: $body/request) to debug, and check $domain/$server/log/$server.log file to check log action.
Hope it help.
Jonathan Jiang -
Invalid body-content value in TLD: NONE.
Hi,
I'm using JDeveloper 10.1.3.3.0 and is an AppFuse 2.0 project.
I built the .jws file by using Maven2.0 JDeveloper plug-in.
But when I tried to compile the Web, it gave me the following error. Please adivse.
Error(4): Invalid body-content value in TLD: NONE.
Below is the taglib I used and I added the jar files to the library accordingly.
<%@ taglib uri="http://acegisecurity.org/authz" prefix="authz" %>
<%@ taglib uri="http://displaytag.sf.net" prefix="display" %>
<%@ taglib uri="http://struts-menu.sf.net/tag-el" prefix="menu" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/fmt" prefix="fmt" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://www.opensymphony.com/oscache" prefix="cache" %>
<%@ taglib uri="http://www.opensymphony.com/sitemesh/decorator" prefix="decorator"%>
<%@ taglib uri="http://www.opensymphony.com/sitemesh/page" prefix="page"%>
<%@ taglib uri="http://www.appfuse.org/tags/spring" prefix="appfuse" %>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-bean" prefix="bean"%>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-logic" prefix="logic"%>
<%@ taglib uri="http://xmlns.oracle.com/portal/pdk/struts/tags-html" prefix="html"%>
<%@ taglib uri="http://jakarta.apache.org/struts/tags-html" prefix="shtml"%>
Can someone please help?
Thanks,
WongYour template contains an IE Conditional Comment that is adding 30px of top padding to #sidebar1. This padding may required in older versions of IE but not IE9.
<!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional comment */
.twoColFixRtHdr #sidebar1 { padding-top: 30px; }
.twoColFixRtHdr #mainContent { zoom: 1; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]-->
To fix it, change [if IE] to [if lt IE 9]
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Generate & Export PDF on the fly without holding entire pdf contents memory
Hello Everyone,
We are using Crystal Reports JRC (in our server side application. In a typical use-case the generated report is exported into the pdf format and streamed to the client/browser.
My question is with regards to the current interface/implementation of the JRC export api(s), which returns an InputStream which is basically a ByteArrayInputStream?, Why ByteArrayInputStream ? why not a custom InputStream imeplementation which really benefits from the streaming approach, and give you the option to stream the contents as they are generated on the fly, instead of it holding the entire report contents in a byte-array, as is the case with using ByteArrayInputStream. Since, this often seems to choke our system with regards to memory footprint, when the generated report contains huge dataset.
Please comment? Is that not possible ? Is there any reason why ByteArrayInputStream is the only way to retrieve the report contents ?
Thanks,
Farhan.We have new place called Idea Place, look up on the right hand side. Great place to add enhancement requests.
Or the link: http://www.sdn.sap.com/irj/scn/idea-place -
My iPod touch is permanently disabled and it says to connect my iPod to my iTunes yet when I do that, it tells me to type in pass code even though it's still disabled. i cant go to DFU mode cause my home button is broken PLEASE HELP ME GOD I MISS MY IPOD TOUCH PLEASE :'((
i cant do that sir ,my ipod touch 4g keeps rebooting and rebooting all over again until the battery is empty HELP GUYS PLEASE
-
The body/content of my emails is invisible in the large/main part of the screen when using the mail app on my iPad. I can see some of the text from each email in the small preview pane on the left side of the screen (when holding iPad in landscape orientation). The only way I can read the content of an email is to forward or reply and then the body/content appears. How do I fix this problem??
Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
If that doesn't work then try closing the Mail app completely : from the home screen (i.e.not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Where can I get help re: a file missing from Pages in iCloud?
Where can I get help re: a file missing from Pages in iCloud?
If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.
-
Certain emails showing with no body content
Hello,
I have an odd issue with (IMAP) mail on both the iPhone and iPad. Since moving to a new web host (Fasthosts), email coming in from certain places - currently Flickr, Amazon and Groupon - have no body content; in the list of messages, the sender and subject are displayed, followed by 'This message has no content'. The messages appear properly using the host's web-based mail client (OWA 2007) and Mac mail.
I've been in a lengthy (and mostly frustrating) support call with Fasthosts, who are adamant it's not them, despite the fact the issue only started when I set up the account with them. They say it must be the iPhone at fault. All I can find on the web is reference to the other issue where spurious email is shown with now sender or subject, which despite being similar, is not the problem I have.
If anyone can shed some light on this, I'd be grateful, as it's annoying the **** out of me!
DavidDoes your email template has body tag, if so you need to make sure you are filling the body section in your workflow.
-sFred -
Email body content is being sent as an attachment in workflow
Dear all,
In SBWP when i send mails recipents reciving mails as attachment but i need same as email body content.
pls suggest me..
Regards.
Rahul.GIn send mail task..how did you write the container values?
-
Change the default setting of 'Match entire cell contents' in Excel 2007
Hi,
I am using Excel 2007 on Windows 7 and need to search the contents of cells in a large spreadsheet on a regular basis.
When I open the Find and Replace dialogue box, the Match entire cell contents option is always checked. I deselect this to search for the cell contents I require. If I then enter any values into a cell and try to search for another cell,
the Match entire cell contents option is activated again.
Is there a way to change the default setting for this checkbox to be off rather than on?
Thank you,
Nitin SunejaHi Chad,
I will check if it is something localised to the spreadsheet itself as it is shared by a number of people and all are having this problem with this sheet.
Thanks for looking into this for me.
Nitin. -
Need Help Centering Page Content
Hi, I have added a white box behind my main page content but the content is not centered within the box. It seems to be on the left. There are a number of different style sheets and I need to find out which style is affecting how the content is positioned.
1. In this link below I’m not sure what is making the content go to the “left”. I need all of the thumbnails to be centered in the white area. That is what I need to find out first. What is the best way to find what is causing the thumbnails to go to the left? Is there an easy way to narrow down what is causing the thumbnails to go to the left?
If I select “ul.work li” I notice it is set to (float: left). If I change it to (float: right) the thumbnails all move to the right. but if I set it to (float: none) the thumbnails all line up vertically. Not what I want.
http://www.buzzfx.ca/2d_character.html
In the homepage I also need to have all of the content centered.
http://www.buzzfx.ca
2. Also, how would I move the white box up to align with (touch the bottom) of the grey header?Thanks John, I managed to watch a good tutorial that set me straight.
So back to the initial question. I am trying to center the content in the body but it seems to be aligned "left". Using Firebug, I think I have found the part that needs changing.
1. At this link: http://www.buzzfx.ca/2d_character.html
2. I hovered over the thumbnails until I found: <ul class="work fullwork clearfix">
3. I then looked in the style and I believe it is this code below in "bold italics" that I need to edit to get the "content" to be centered but I am not sure how specifically to fix it/
Q. Why does "margin-left: 40px;" have a strike through it?
Q. Is "margin-left: 40px;" the reason the content is aligned "left"?
Q. Could I not just "center" the contents instead of have it positioned from the "left"? Please explain!
I would be very grateful if someone could look at my page in Firebug to tell what the best way is to center the body content.
.clearfix:after { clear: both;
content: ".";
display: block;
height: 0;
line-height: 0;
visibility: hidden;
ul.work {
margin: 0 -15px;
ul, ol {
margin-left: 40px;
h1, h2, h3, h4, form, table, ul, ol, p, dl, blockquote, hr {margin-bottom: 30px;
text-align: left;
ol, ul {
list-style: none outside none;
Maybe you are looking for
-
Progress Bar freeze after 4.2.1 Update - any news?
Hey Guys, any news on the progress par freeze after the installation of 4.2.1 on the iPad? After a horrible 8 hours(!) Backup phase, my iPad 3G 32 Gigabyte freezes after the progress bar reaches 80%. I tried to do a hard reset but it would just stuck
-
Hi, I am getting the following error when I invoke oracle Apps Adapter. The same working pretty well in DEV and when we moved the code to SIT its behaving this way. Another issue is even though in the flow trace, it says faulted, but I can still see
-
Hi all. I found that on OMB DB11R1, OMBINSTALL OWB_TARGET_USER was not there. It differs from OMB DB10g. What is the command that I should replace instead of this.... Thanks in Advance. Edited by: SwapnaPrerana on Nov 23, 2010 2:55 PM
-
Hi and merry holidays ! I am new to my iPAD 1 - yes the basic one without a camera. I am also using Windows. So I have sorted my iTUNES application on Windows and hooked up iPAD 1 and synced various movies and songs etc. So all going smoothly. But am
-
Unable to print in linux using java 1.5
Hi i could't able to print in linux system using java 1.5. Printer name is detecting. when i execute printDataTransferCompleted then printJobNoMoreEvents happening But print is not happening. here i attached the source. import javax.print.Doc; import