Help!!! - Erase Flash error! 3750 Catalyst Switch

Hi,
In my error I ran a 'erase flash' and deleted the entire flash rather than a file within the flash. Now the switch boots into a 'switch:' mode with limited options. Is there a way of copying across a flash. Xmodem doesnt seem an option?
Thanks

The contents below are the only commands when I type ?, I have a load_helper but it doesnt seem to help. I was hoping to do a rommon, then download the file from hypertrm but it doesnt seem to work? any other ideas, thanks
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_bs -- Set attributes on a boot sector filesystem
set_param -- Set system parameters in flash
sleep -- Pause (sleep) for a specified number of seconds
-- MORE --
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:

Similar Messages

HELP! flash error code #1065 variable TCMText is not defined

Hi,
Im doing a project for uni and trying to create a search bar throughout the flash document for people to find what they are looking for.
Followed a tutorial online step by step and then i get this error. #1065 variable TCMText is not defined.
I'm really a beginner, any help would be so greatly appreciated!
stop();
var i:int = 0;
var names:Array = new Array("Annual Report","annual report");
var frames:Array = new Array("2","2");
text_in = "..."; /*what is wrong with you */
searchbutton.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
findInArray(text_in.text);
gotoAndStop(frames[i]);
function findInArray(str:String):int
for(i = 0; i < names.length; i++)
if(names[i] == str)
return i;
return 0;
it says the issue is on line 7 where i have commented out "what is wrong with you"!
Ive read a lot of things online and i have got it as classic text, which everyone is telling them to do. So quite confused.
If you can, please help me.
Thanks!!!

Sorry for a delay in reply.
Here is what the error says...
ReferenceError: Error #1065: Variable TCMText is not defined.
Scene 1, Layer 'Actions', Frame 1, Line 7
1067: Implicit coercion of a value of type String to an unrelated type flash.text:TextField.
If you could help in away that would be great cheers!

Help! Flash error: 1088 (Markup in doucment not well-formed)

I'm trying to use ASP.NET to retrieve data from the sql server, place in inside an xml and sends the xml to flash to display the data.
However, I'm getting
TypeError: Error #1088: The markup in the document following the root element must be well-formed.
at news_fla::mainTimeline/loaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
This is my code:
ASP.NET
=======
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim adapter As SqlDataAdapter
        Dim ds As New DataSet
        Dim sql As String
        Dim con As New SqlConnection("data source = GN80000798-0\SQLEXPRESS2008; initial catalog = EL; integrated security = true")
        sql = "select * from news"
        Try
            con.Open()
            adapter = New SqlDataAdapter(sql, con)
            adapter.Fill(ds, "data")
            con.Close()
            Response.ContentType = "text/XML"
            Response.HeaderEncoding = Encoding.UTF8
            ds.WriteXml(Response.OutputStream, XmlWriteMode.WriteSchema)
            MsgBox("Done")
        Catch ex As Exception
            MsgBox(ex.ToString)
        End Try
    End Sub
Flash
====
import flash.xml.*;
var newsrequest:URLRequest = new URLRequest("http://localhost:1179/DB/DB.aspx"); //ASP.NET development server
var newsloader:URLLoader = new URLLoader();
var newsxml:XML;
var dvar:URLVariables = new URLVariables();
dvar.dummy = "dummy";
newsrequest.data = dvar;
newsrequest.method = URLRequestMethod.POST;
newsloader.load(newsrequest);
newsloader.addEventListener(Event.COMPLETE, loaded);
titlenews.autoSize = TextFieldAutoSize.LEFT;
bodynews.autoSize = TextFieldAutoSize.LEFT;
function loaded(event:Event){
newsxml = new XML(event.target.data);
newsxml.ignoreWhitespace = true;
trace(newsxml);
HOWEVER, if i replace the
"ds.WriteXml(Response.OutputStream, XmlWriteMode.WriteSchema)"
with
"ds.WriteXml("C:\new.xml")
it works. But i dont wan a .xml file residing in the server. so i hope that the .xml file would be cleared off as soon as the request is done.
Did i do something wrong?
PS: I don't know if i post this in the correct section but since it's related to AS3, thats why i post it here. sorry if i made a mistake.

Please paste the following line as first statement in loaded function, also compare the output of the following line with expected output from ASP page.
trace(event.target.data);
The error is causing due to the fact that XML received is not well formed.
I guess the problem is with write XML you are getting some additional tag elements and these are not wellformed. so flash is giving error.

Please Help! Flash Installation Errors!

I had Flash CS4 working a few months ago, then I installed Air.
After it installed, I kept getting an error message whenever I tried to open Flash CS4.
I uninstalled Air, Flash, and all other Adobe programs from my computer.
Then, I couldn't install flash.
I used the CS4 Clean Script, defraged my computer, cleaned the registry, removed all traces that I could find of Adobe on my computer.
I disables my firewall, McAfee and I'm the administrator of my computer, but that didn't help.
The installation stops very close to the end and says Installation Failed
I even tried safe mode, but the fancy installer didn't work like a normal batch file and wouldn't open.
I'm using a 32-bit Windows XP.
Please Help!
The error code:
Adobe Flash CS4
Error:
Error 1625. This installation is forbidden by system policy. Contact your system administrator.

When you uninstall, make sure to use the CS4 Clean Utility thereafter. Sometimes remnants of trials get in the way. Also make sure you get rid of Adobe AIR and Acrobat.com. These are separate from the main install and need to be removed individually. Likewise, you may wish to check your Acrobat/ Adobe reader install and remove it, if necessary. Since it uses components shared with PS and those may in fact be newer than the ones on the Photoshop install DVD due to updates, the installer may not liek them. And of course with all things Vista: Run as admin on first program launch so the activation can proceed and all other options can kick in correctly.
Mylenium

My ipad just flashes green and then switches off. i cant switch it on. its fully charged.help!

My ipad just flashes green and then switches off.its fully charged.help!!!

Dear Barry...thank you for your reply.I am afraid it still doesnt work. Theres a white flash and a shutter sound and it wont stay swited on. I only had it since Jan 2013.

EoMPLS with Catalyst 3750 Metro Switches

Hi,
I am trying to setup an EoMPLS tunnel (VLAN mode) between two 3750 Metro switches. But I am not getting the Status down from the both PEs.Also the 'show mpls l2transport binding' shows no output interface and no label stack is attached. Can anybody in the forum help me out? Is it any IOS related problem.
The IOS version is:c3750me-i5k91-mz.122-25.SEG1.bin
Thank you,
Dabraj Sarkar
Grameenphone Ltd,
Dhaka, Bangladesh

Hi,
can you provide the related config? Without this it is hard to tell anything.
Regards, Martin

Dacl on ACS 5.1 and Catalyst switch 3560

Dear all
I have ACS 5.1 and Catalyst switch 3560 with version 12.2(53)SE. I configure a dacl on the ACS and I use it on authorization profile.
This authrization profile is used on access policy.
I tried the authentication but it doesn't work. I checked the ACS logs and I found that the user is authenicated successfuly but the dacl gives this error (The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected)
Steps:
11001 Received RADIUS Access-Request
11017 RADIUS created a new session
11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected
11003 Returned RADIUS Access-Reject
DACL:
deny ip host 1.2.3.4 1.2.3.0 0.0.0.255 log
permit ip any any log
Thanks on advance,

Dear Tiago
I applied the command "radius-server vsa send". Now I can see the dacl is applied but I can't see it on the switch and even the authentication is succueeded ont the ACS logs but it give me unauthoized on the switchport. You can see the logs( started with the username acstest and the access-list is applied but it doesn't work and you can see theat it goes for mab after eap timed out). I hope you can help on this issue.
Dec 13,10 10:29:00.513 AM
00-23-AE-7A-58-A6
00-23-AE-7A-58-A6
Default Network Access
Lookup
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
22056 Subject not found in the applicable identity store(s).
Dec 13,10 10:28:29.186 AM
#ACSACL#-IP-Guest-4cfcc14d
Dot1x-3560-Switch
1.2.3.4
TESTACS
Dec 13,10 10:28:28.726 AM
acstest
00-23-AE-7A-58-A6
Default Network Access
PEAP (EAP-MSCHAPv2)
Dot1x-3560-Switch
1.2.3.4
FastEthernet0/5
TESTACS
Thanks,

Firefox freeze whenever flash error happens

I have the newest firefox and the flash debug version. Whenever there is an flash error happen, the error message window popup, and then my firefox freeze immediately. It seems like the problem only happen on debug version of flash. I searched online, people said change the "dom.ipc.plugins.timeoutSecs" to -1 will fix the problem, but I tried, it doesn't really fix it. Anyone know anything I could try to fix it?
Thanks.

Hi. karaoke I am not sure if its the same issue. The crash at language switch on my computer was due to the IME for Eastern Language Banks (Language option -> Detail under text services and input languages -> Properties -> reset/untick auto learn).
If you are not using Eastern Language IME... I am sure others here have more experience and can better help you. =)

Magic number mismatch: bad mzip file in 3750 stack switch

Hi All can anybody help me in this error msg
"magic number mismatch: bad mzip file"
I am trying to upgrade the switch with"c3750e-ipbasek9-tar.122-55.SE5.tar" in 3750 stack switch it is showing this error msg while booting
thanks in advance

Hi,
The reason you are getting this error message on the switch is a corrupt or wrong IOS image "c3750e-ipbasek9-tar.122-55.SE5.tar".
If the switch is in rommon mode, and you have any other image in the switch, boot it using that image. Once the switch is up, download and copy the correct IOS image once again on the switch and try to upgrade.
If you need help in finding the correct IOS image, give me the exact switch model number, i will help you with that.
But forsure the image is wrong or corrupt and that is why you are getting this error.
Thanks
Ankur
"Please rate the post if found useful"

Intel MAC Compatibility with 3560/Other Catalyst Switches

Some of our users recently reported problems with their new Intel based Macintosh computers when we upgraded from old Extreme Summits to Catalyst 3560 series switches. They report sluggish response from the network. We have checked the ports for negotiation issues and errors and do not find any. Suspect the Intel Mac; but wanted to find out if anyone else is experiencing the same or has suggestions. Thanks.

Hello,
to my understanding MAC issues should not be the cause of your issues. Either the Ethernet frame is standard compliant, then there should not be an issue with Catalyst switches and no port errors. Or the Ethernet frames or MAC in use is non standard then the switch would report an error.
Network response times depend on many things and negotiation might be the first thing to check - as you did. I would still recommend fixed settings for port speed and especially duplex. Just to avoid also intermittend problems (f.e. between PC reboots).
Have you also checked for MTU and TCP window size settings? What else did change when you upgraded to the 3560s? Did you also check Router and switch ports for duplex and speed settings?
Hope this helps! Please rate all posts.
regards, Martin

How can i deinstall the rotten ADOBE HELP for Flash CS5 an install a new one (Mac OS X 10.6.8 )

My Flah Help can't download newer Versions and Ressources. So i can't use it. And i have to. And i paied for it.
So: How can i deinstall the rotten ADOBE HELP for Flash CS5 an install a new one (Mac OS X 10.6.8 )?

Do you receive an error message when trying to use the help files? What have you tried so far to resolve your difficulties?

HELP!HELP!HELP! Microsoft error message

Please help! When I try to edit a certain scene IN FLASH CS3,
microsoft error message pops up to send an error report. i was just
using that scene earlier today. WHAT THE HELL HAPPENED?
i can't even test the scene or movie! please help!
message:
Error signature
Appname: flash.exe AppVer 9.0.0.494

Hi, did you find a solution to this? I have the same problem
- except I can't even open any of my Flash files now. I'm heading
to tech support.

Can a Catalyst switch terminate a QinQ (double vlan tagged) connection on an SVI?

Can a Catalyst switch terminate a QinQ connection on an SVI? Is anything similar possible?
I know I can pass through QinQ traffic through a switch at L2, but can I take it in at L2 with double tags and terminate it on a L3 SVI somehow?
Im looking for a simple way of making a WAN lab environment.
IE I want to do the equivalent of this on a Catalyst such as a 3560/3750:
interface GigabitEthernet0/0.1
encapsulation dot1Q 101 second-dot1q 1
ip vrf forwarding 100101
ip address 1.1.1.1/24
interface GigabitEthernet0/0.2
encapsulation dot1Q 101 second-dot1q 2
ip vrf forwarding 100102
ip address 2.2.2.2/24
thanks in advance.

Can a Catalyst switch terminate a QinQ connection on an SVI? Is anything similar possible?
I know I can pass through QinQ traffic through a switch at L2, but can I take it in at L2 with double tags and terminate it on a L3 SVI somehow?
Im looking for a simple way of making a WAN lab environment.
IE I want to do the equivalent of this on a Catalyst such as a 3560/3750:
interface GigabitEthernet0/0.1
encapsulation dot1Q 101 second-dot1q 1
ip vrf forwarding 100101
ip address 1.1.1.1/24
interface GigabitEthernet0/0.2
encapsulation dot1Q 101 second-dot1q 2
ip vrf forwarding 100102
ip address 2.2.2.2/24
thanks in advance.

Differences between MSFC1 and MSFC2 in Catalyst switches

Hi,
Want to know the differences between MSFC1 and MSFC2 in Catalyst switches.

Hi,
There is not much difference between MSFC1 and MSFC2, the main difference is how the MSFCs send the hardware programming to the PFC. The MSFC1 uses MLS to program the hardware by using the first packet of the traffic. While the MSFC2 uses CEF-based MLS to program the PFC so that the supervisor can make the hardware switching of the packet. NOtice the difference if the MSFC1 needs to see the first packet while the MSFC2, in theory will not need to see a first packet as it uses the CEF routing table to program the PFC2. Now, the kicker, if MSFC2 in sup1A , all this CEF-based MLS is not used since it needs PFC2 to be able to do this. Sup1A does not come with PFC2 only Sup2 comes with PFC2. The MSFCs gives the Cat6K a L3 ability and it's important but the switching performance of the switch depends on the PFC.
Here is a link on MSFC2 data sheet:
http://www.cisco.com/en/US/products/hw/switches/ps708/products_data_sheet09186a00800887fd.html
Please rate helpful posts.

Need help asap with Error #2109!

Need major help in an error that is driving me crazy! I have a movie clip button, however, once you click on it the output will say:
ArgumentError: Error #2109: Frame label instance15 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at index_fla::MainTimeline/goLabel()
i am new in flash and trying to learn as3. i've looked at what error this is but i cant get my head around it. what i m trying to do it if you click on a button, a swf file will load on the the page. but it is not loading and the error comes up!
my code is:
function goLabel(e:MouseEvent):void
gotoAndStop(e.target.name);
if anyone knows how to solve this problem please help! let me know if i need any other codes, but this should be it!
thanks. i am about to go bald.

Do you have a frame on your timeline that is labeled as "instance15"?
The code you show will do nothing in the way of loading an swf.... gotoAndStop is a timeline command, not a file loading command.

Help!!! - Erase Flash error! 3750 Catalyst Switch

Similar Messages

Maybe you are looking for