Help!! Error generating the test frame..

i created a smartfrom and i am trying to fetch data into it. the program is bug free and was activated.
but during execution it popped up this msg..
Error generating the test frame
Message no. FL819
Diagnosis
The system could not generate a syntactically correct test frame for function module /1BCDWB/SF00000166. You therefore cannot test the function module using the test environment. You have probably used an ABAP feature in the interface definition that is not yet supported in the test environment.
The error message is:
"ZCIVILBOQ" must be a flat structure. You cannot use internal tables, strings, references, or structures as components .
System Response
Procedure
Check whether you can change the interface of the function module so that it is possible to generate the test frame. If this is not possible,you will have to write your own utility for testing the function module.
Procedure for System Administration
plzz help..
Edited by: Sumit Nene on Dec 31, 2008 5:30 AM

the table zcivilboq has already been defined in DDIC. why to define it in th form?
yes but i have created an Internal table IT like zcivilboq in form interface.

Similar Messages

ABAP: error generating the test frame

Hi ABAP gurus,
I received below error during execute/test the function module. Could anyone help or advice me why i'm getting the below error.
Error generating the test frame
Message no. FL819
Diagnosis
The system could not generate a syntactically correct test frame for function module ZDEV_DC_REALLIGNMENT_C4. You therefore cannot test the function module using the test environment. You have probably used an ABAP feature in the interface definition that is not yet supported in the test environment.
The error message is:
"ANY TABLE" expected, not "HASHED TABLE".
System response
Procedure
Check whether you can change the interface of the function module so that it is possible to generate the test frame. If this is not possible,you will have to write your own utility for testing the function module.
Procedure for System Administration
Thanks.
Best regards,
Shanti

Hello Shanti
In the interface of the function module apparently a HASHED table type is used which cannot be generated in the test environment.
Either you replace you HASHED table type with a STANDARD (or ANY) table type or you write a litle report which calls your function module.
This is a normal limitation of the test environment in SE37.
Regards
Uwe

Error generating the Test Frame

Hello all,
I have created few Function Modules (SE37) which are working fine on the dev system. After I moved them to the Quality system, when I tried to run them, all of them are giving this error before even going to the test screen:
"Error generating the test frame"
When I check the details of the error, by clicking on the "?" on the error window, it says there is a missing structure, that I have used in my FM. But the structure is not missing. It does exist in the system (I checked from SE11)
Can someone tell me how I can resolve this problem?
Thanks and Regards,
Reena

Hi,
Just go to ST22 and see the dump created. It will tell you the table or structure name ( Standard ) that is missing/inconsistent in the quality system. You can consult with your basis team to rectify this. Some tables may be partially active or with run time inconsistencies.
Regards,
S. Chandra Mouli.
Message was edited by:
Chandramouli Subburathinam

E message in production server Error generating the test frame

Hi all experts
I developed a object using layout in smartforms ....
we have 3 server in my company .....
1] development
2] Quality
3] produ
it is giving me a error 'Error generating the test frame'
plz tell me
thanx

Hi all experts
I developed a object using layout in smartforms ....
we have 3 server in my company .....
1] development
2] Quality
3] produ
it is giving me a error 'Error generating the test frame' while i am checking testing after export and inport into final production server ..
can any one plz tell me the solution.....
plz tell me
thanx

Smartform-Error generating the test frame

i am passing a internal table to a smartform and defined the associated type for that internal table under TYPES tab of the Global Definition.
While testing the smartform it gives a runtime error i.e. Error generating the test frame.
kindly advice where i am going wrong
Thanks
Ravi

Hi Ravindra ,
Test such smartforms with a program and not through SE37 . Not supported see error message -
<b>The test framework for /1BCDWB/SF00000031 has been regenerated but errors have occurred
Message no. FL821
Diagnosis
One reason can be the complex typing of the function module parameters.
In certain circumstances you cannot access the test cases in the test data directory.
Procedure
The test environment of the function builder cannot map (or map correctly) complex types, so that you cannot read or write this data to the test database.</b>
Cheers

Error generating the output preview

Hi friends!
Could you help me u2013 when I run Output Preview in bit invitation process Iu2019ve got a system error u201CError generating the output previewu201D.
What could be a reason?

Note 1172470 - BBP_BID: Error generating the output preview
Note Language: English Version: 3 Validity: Valid from 26.05.2008
Summary
Symptom
From transaction "Process bid"(BBP_QUOT) when you click on print preview,
you get the error "Error generating the output preview". Due to this error
the preview is not displayed.
More Terms
BBP_BID 210, output preview, print preview, preview, bid, quotation, quot,
BBP_QUOT, BBP_OUTPUT, SAPLBBP_OUTPUT, pdf, BBP_OUTPUT_QUOT_PREVIEW_SMART,
SYSTEM_INSTALLED_LANGUAGES.
Cause and Prerequisites
This is caused by a program error.
Solution
Implement the attached corrections or import the corresponding support
package
Header Data
Release Status: Released for Customer
Released on: 26.05.2008 11:14:52
Priority: Correction with medium priority
Category: Program error
Main Component SRM-EBP-CA-PRT Document Output / Forms
Additional Components:
SRM-EBP-QUO Quotation, Bid
Valid Releases
Software Component Release From
Release
To Release and Following
SRM_SERVER 550 550 550
Support Packages
Support Packages Release Package Name
SRM_SERVER 550 SAPKIBKT13
SRM_SERVER 600 SAPKIBKU05
Please raise customer message

Error Generating the Task Form

While publishing a new SharePoint Designer 2010 List Workflow I get an Error:
SharePoint Designer encountered an error generating the task form. Server was unable to process request.--->Activation could not be completed because the InfoPath Forms Services support feature is not present.
I was able to publish SPD Workflows until a couple of days ago. Existing ones can be republished but not new ones.

Try running the following cmdlets.
Disable-SPFeature "IPFSSiteFeatures" - URL "Path"
Enable-SPFeature "IPFSSiteFeatures" -URL "Path"
These cmds will restart the Infopath Forms Services support features, which is responsible for supporting publishing Infopath Forms.
Hope this works for you.

Need help in generating the ranks

Hi,
I need some help in generating the ranks from 1 to 6 for each order_id
based on the item_cnt
Order_Id 100 with the Item_cnt 217,112,89,76,55,39 to be ranked from 1 to 6
Order_Id 200 with the Item_cnt 29,25,22,19,13,13 to be ranked from 1 to 6
Order_id 300 with the Item_cnt 15,7,6,6,6,4 to be ranked from 1 to 6
SOURCE DATA TABLE : ORD_TEST
ORDER_ID ORDER_IN_DATE ORDER_OUT_DATE ITEM_CNT
100 9/11/2012 9/12/2012 217
100 9/13/2012 9/15/2012 112
100 9/14/2012 9/17/2012 89
100 9/13/2012 9/16/2012 76
100 9/12/2012 9/15/2012 55
100 11/9/2012 11/18/2012 39
100 9/14/2012 9/18/2012 37
100 9/20/2012 9/22/2012 32
200 11/9/2012 11/18/2012 29
200 9/13/2012 9/15/2012 25
200 9/12/2012 9/15/2012 22
100 9/12/2012 9/14/2012 22
100 9/13/2012 9/17/2012 20
200 9/14/2012 9/17/2012 19
100 9/14/2012 9/16/2012 19
100 9/13/2012 9/18/2012 18
100 9/12/2012 9/19/2012 15
300 9/11/2012 9/12/2012 15
200 9/12/2012 9/16/2012 13
200 9/22/2012 9/29/2012 13
200 9/13/2012 9/17/2012 12
200 10/5/2012 10/8/2012 9
300 9/12/2012 9/18/2012 7
300 9/12/2012 9/17/2012 6
300 10/6/2012 10/10/2012 6
300 4/25/2013 4/27/2013 6
300 10/6/2012 10/9/2012 4
300 9/16/2012 9/23/2012 2
100 10/5/2012 10/8/2012 1
200 9/11/2012 9/12/2012 1
QUERY OUTPUT NEEDED IS
ORDER_ID ORDER_IN_DATE ORDER_OUT_DATE ITEM_CNT RNK
100 9/11/2012 9/12/2012 217 1
100 9/13/2012 9/15/2012 112 2
100 9/14/2012 9/17/2012 89 3
100 9/13/2012 9/16/2012 76 4
100 9/12/2012 9/15/2012 55 5
100 11/9/2012 11/18/2012 39 6
200 11/9/2012 11/18/2012 29 1
200 9/13/2012 9/15/2012 25 2
200 9/12/2012 9/15/2012 22 3
200 9/14/2012 9/17/2012 19 4
300 9/11/2012 9/12/2012 15 1
200 9/12/2012 9/16/2012 13 5
200 9/22/2012 9/29/2012 13 6
300 9/12/2012 9/18/2012 7 2
300 9/12/2012 9/17/2012 6 3
300 10/6/2012 10/10/2012 6 4
300 4/25/2013 4/27/2013 6 5
300 10/6/2012 10/9/2012 4 6
Below is the script
CREATE TABLE ORD_TEST (ORDER_ID NUMBER, ORDER_IN_DATE
DATE,ORDER_OUT_DATE DATE, ITEM_CNT NUMBER)
INSERT INTO ord_test VALUES
(100,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),217);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),112);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),89);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),76);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),55);
INSERT INTO ord_test VALUES
(100,TO_DATE('11/9/2012','MM/DD/YYYY'),TO_DATE('11/18/2012','MM/DD/YYYY'),39);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),37);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/20/2012','MM/DD/YYYY'),TO_DATE('9/22/2012','MM/DD/YYYY'),32);
INSERT INTO ord_test VALUES
(200,TO_DATE('11/9/2012','MM/DD/YYYY'),TO_DATE('11/18/2012','MM/DD/YYYY'),29);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),25);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/15/2012','MM/DD/YYYY'),22);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/14/2012','MM/DD/YYYY'),22);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),20);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),19);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/14/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),19);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),18);
INSERT INTO ord_test VALUES
(100,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/19/2012','MM/DD/YYYY'),15);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),15);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/16/2012','MM/DD/YYYY'),13);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/22/2012','MM/DD/YYYY'),TO_DATE('9/29/2012','MM/DD/YYYY'),13);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/13/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),12);
INSERT INTO ord_test VALUES
(200,TO_DATE('10/5/2012','MM/DD/YYYY'),TO_DATE('10/8/2012','MM/DD/YYYY'),9);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/18/2012','MM/DD/YYYY'),7);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/12/2012','MM/DD/YYYY'),TO_DATE('9/17/2012','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('10/6/2012','MM/DD/YYYY'),TO_DATE('10/10/2012','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('4/25/2013','MM/DD/YYYY'),TO_DATE('4/27/2013','MM/DD/YYYY'),6);
INSERT INTO ord_test VALUES
(300,TO_DATE('10/6/2012','MM/DD/YYYY'),TO_DATE('10/9/2012','MM/DD/YYYY'),4);
INSERT INTO ord_test VALUES
(300,TO_DATE('9/16/2012','MM/DD/YYYY'),TO_DATE('9/23/2012','MM/DD/YYYY'),2);
INSERT INTO ord_test VALUES
(100,TO_DATE('10/5/2012','MM/DD/YYYY'),TO_DATE('10/8/2012','MM/DD/YYYY'),1);
INSERT INTO ord_test VALUES
(200,TO_DATE('9/11/2012','MM/DD/YYYY'),TO_DATE('9/12/2012','MM/DD/YYYY'),1);
select * from ord_test order by item_cnt desc;
Thank you

Hi,
That's called a Top-N Query , and here's one way to do it:
WITH    got_rnk            AS
     SELECT    o.*
     ,       ROW_NUMBER () OVER ( PARTITION BY order_id
                             ORDER BY          item_cnt     DESC
                    ) AS rnk
     FROM      ord_test o
SELECT       *
FROM       got_rnk
WHERE       rnk     <= 6
ORDER BY order_id
,            rnk
;Analytic functions (such as ROW_NUMBER) are computed after the WHERE clause is applied. If you want tio use the results of an analytic function in a WHERE clause, then you can compute the analytic function in a sub-query (such as got_rnk above), and then use that value in the WHERE clause of a super-query.

Job help to regenerate the test plan after test case addition in solar02

Hi,
Any job help to regenerate the test plan after the test case addition in the solar02?
It is very hard to regenerate in the test plan in test plan management, need to select the test case manually every time.
Rg,
Karthik

Hello,
You can send mail with the status of the test catalog-
specify a mail system to which Test Workbench test objects send messages to the people responsible
Please refer the below link for more information:
http://help.sap.com/saphelp_smehp1/helpdata/en/6a/88370a002911d2bd02080009b4534c/frameset.htm
Regards,

Error in the test (test.asp) of IIS for Exchange2000 portlet

To verify ASP access to my IIS and Exchange server,
the test.asp return me the following error:
Error Type:
Active Server Pages, ASP 0241 (0x80004005)
The CreateObject of '(null)' caused exception C0000005.
/exchange_portlet/test.asp
Thanks a lot for your help!!

since the function is defined in your db, it only makes sense in a query that gets data from you database
the xquery for that would be something like ...
for $business_row in BUSINESS_TABLE()
where $business_row/BUS_ID = $mycode
return
get_trade_name( $business_row/BUS_ID )
then ODSI can generate the sql ...
select get_trade_name ( BUS_ID ) from BUSINESS_TABLE where BUS_ID = ?

Error using the test console of the Oracle Service Bus 11gR1

Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
Every time I try to execute a business service or a proxy service I end up getting the following message.
Error Accessing Test Configuration
*"Test Console" service is not running. Contact administrator to start this service.*
In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
Is anyone else facing this too ??
Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
*[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
Attached the whole log at the end below.
To provide an update on my trouble shooting
1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
Result: Still the same error message.
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
I am also attaching the file contents here
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
<java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
<java:alsb-credential-debug>false</java:alsb-credential-debug>
<java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
<java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
<java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
<java:alsb-management-debug>false</java:alsb-management-debug>
<java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
<java:alsb-module-debug>false</java:alsb-module-debug>
<java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
<java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
<java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
<java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
<java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
<java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
<java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
<java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
<java:alsb-test-console-debug>true</java:alsb-test-console-debug>
<java:alsb-transports-debug>false</java:alsb-transports-debug>
<java:alsb-uddi-debug>false</java:alsb-uddi-debug>
<java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
<java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
<java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
<java:alsb-security-module-debug>false</java:alsb-security-module-debug>
<java:alsb-sources-debug>false</java:alsb-sources-debug>
<java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
<java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
<java:alsb-throttling-debug>false</java:alsb-throttling-debug>
<java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
<java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
<java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
<java:alsb-debugger-debug>false</java:alsb-debugger-debug>
<java:alsb-console-debug>false</java:alsb-console-debug>
<java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
<java:alsb-bpel-debug>false</java:alsb-bpel-debug>
<java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
<30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
<30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
This is really putting me off and its really disappointing to see all these issues in this new release.
How can oracle let a release slip in with such a Major Issue.
Please can any one help or provide a work around atleast.
Regards
Nitin

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

Help - error: 1017: The definition of base class CairngormEvent was not found.

Hi.
I've inherited someone else's flex code. I need to make a small change re-complie and re-deploy, but the IDE (flash builder 4) keeps telling me there's an error in one of the.as files. Here's the details:
= Error:
1017: The definition of base class CairngormEvent was not found.
= Code:
package actionScripts.events {
    import flash.events.Event;
    import com.adobe.cairngorm.control.CairngormEvent;
    public class CairngormGeneralEvent extends CairngormEvent {
     [etc..]
Any ideas?
I'm using Flash Builder 4. Any help would be much appreciated.

check if the Cairngorm.swc is in the libs folder

Help in generating the same random numbers each time of the program executi

dear friends
i am facing a problem that the random numbers generated at time of each exectuion of the program are not the same, i want to generate the same random numbers every time time i run the program. i need your help. i am giving the code in c++ if anybody can help in providing the solution so that i get the same random numbers at every run of the program. waiting for your help
wit regards
jaya shankar
#include<iostream.h>
#include<stdio.h>
#include<stdlib.h>
#include<time.h>
#include<math.h>
class density
int s[150][150],parent[150][150],i,j,l,n,loop;
public:
void bd(void);
void css(void);
void density :: bd(void)
cout<<"ENTER THE POPULATION SIZE = ";
cin>>n;
cout<<"\nENTER THE NO.OF LOOPS = ";
cin>>loop;
for(i=0;i<n;i++)
for(j=0;j<80;j++)
s[i][j]=rand()%2;
cout<<"s:"<<s[i][j];
void density :: css(void)
int a,b;
float c;
for(i=0;i<n;i=i+2)
b=rand()%100;
cout<<"random b="<<b;
main()
density d;
d.bd();
d.css();

To generate the same random,it's impossible!
why do you want to do that?

Help in generating the same random numbers at every time of executuion

dear friends
i am facing a problem that the random numbers generated at time of each exectuion of the program are not the same, i want to generate the same random numbers every time time i run the program. i need your help. i am giving the code in c++ if anybody can help in providing the solution so that i get the same random numbers at every run of the program. waiting for your help
wit regards
jaya shankar
#include<iostream.h>
#include<stdio.h>
#include<stdlib.h>
#include<time.h>
#include<math.h>
class density
int s[150][150],parent[150][150],i,j,l,n,loop;
public:
void bd(void);
void css(void);
void density :: bd(void)
cout<<"ENTER THE POPULATION SIZE = ";
cin>>n;
cout<<"\nENTER THE NO.OF LOOPS = ";
cin>>loop;
for(i=0;i<n;i++)
for(j=0;j<80;j++)
s[j]=rand()%2;
cout<<"s:"<<s[j];
void density :: css(void)
int a,b;
float c;
for(i=0;i<n;i=i+2)
b=rand()%100;
cout<<"random b="<<b;
main()
density d;
d.bd();
d.css();

You have to read the documentation for the java.util.Random class.
"If two instances of Random are created with the same seed, and the same sequence of method calls is made for each, they will generate and return identical sequences of numbers. In order to guarantee this property, particular algorithms are specified for the class Random"
Here is a peace of code that will do wat you need:
Random rand = new Random(100);
for(int i=0; i<10; i++)
System.out.println("Random="+ rand.nextInt(10));

Error generating the hrform SAP_PAYROLL_US

Hi All,
Am getting an Error 'Generated print program contains a syntax error' when I try activating the standard hrform SAP_PAYSLIP_US.
As the print program is auto generated, am not able to change /fix the error.
Anyidea why the standard hrform is not getting activated?
Regards
Rajasekhar Dinavahi

Hi All,
Found the problem and the solution.
Refer OSS Note: Note 878168 - Hrforms: syntax error in print program for the fix.
Regards
Rajasekhar

Help!! Error generating the test frame..

Similar Messages

Maybe you are looking for