Help: Fix Note Velo and Length without Transform-Window

gents,
i've using the following procedure in logic 7 to fix the velocity (or length) of a bunch of notes (without opening the transform window):
1. select ALL the notes in the event-mixer
2. enter the value at one note (for example velocity 100)
3. all notes are still selected
4. hold alt, shift and then press return
now i've got a fix velo 100 for all selected notes.
this does not work in logic 8!!
so please post your advice - best regards.

Shift-Option.

Similar Messages

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

How do I compress a file on a Mac. I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

How do I compress a file on a Mac. I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

Select the file with one click, then go to File in the menu bar and select Compress...
By the way Niel's post says control - click. This means click with the control key held down. It produces the same result as going to File in the menu bar and selecting Compress...

Itunes helper was not installed correctly. Error 7 (windows error 14001) ?

Upgraded to ITUNES 10 and received following error - Itunes helper was not installed correctly. Error 7 (windows error 14001) - have tried uninstalling all APPLE products, restarting etc and installing ITUNES and QUICKTIME separately yaddah yaddah - NO SUCCESS. Losing patience ?

have tried uninstalling all APPLE products,
Doublechecking. Were you using the instructions from the following documents?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.)

Error message "iTunes Helper Resources not available" and saving to wrong Drive

I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
Please someone help ...
Thanks.

Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
"Invalid drive X:\" install errors

Please help with "while" "charAt" and "length"

i'm trying to write a program that counts the number of each vowel in an inputed string of characters. i'm using a "while" statement, not a "for" statement, and i'm using a switch statement inside the "while"
i'm having trouble getting the while statement right and i'm also struggling with using charAt and length.
here's what i have so far:
import cs1.Keyboard;
public class mdlprog5
public static void main(String[] args)
String textLine;
int aCount = 0;
int eCount = 0;
int iCount = 0;
int oCount = 0;
int uCount = 0;
int nonVowel = 0;
int charPosition = 0;
char currentChar;
System.out.println ("Enter a line of text.");
textLine = Keyboard.readString();
while (textLine.charAt(charPosition) < textLine.length())
currentChar = textLine.charAt(charPosition);
switch (currentChar)
case 'A':
aCount = aCount + 1;
charPosition++;
break;
case 'E':
eCount = eCount + 1;
charPosition++;
break;
case 'I':
iCount = iCount + 1;
charPosition++;
break;
case 'O':
oCount = oCount + 1;
charPosition++;
break;
case 'U':
uCount = uCount + 1;
charPosition++;
break;
default:
nonVowel = nonVowel + 1;
charPosition++;
anybody have any idea what i'm doing wrong??
thanks in advance for your help

venumadhavA,
i don't understand what you're saying. could you
please elaborate?
Sudha,
thanks for the idea, it worked great!This is more precise and is what enumadhavA suggested,
import cs1.Keyboard;
public class mdlprog5
public static void main(String[] args)
String textLine;
int aCount = 0;
int eCount = 0;
int iCount = 0;
int oCount = 0;
int uCount = 0;
int nonVowel = 0;
int charPosition = 0;
char currentChar;
System.out.println ("Enter a line of text.");
textLine = Keyboard.readString();
textLine = textLine.toUpperCase();
while (charPosition < textLine.length())
currentChar = textLine.charAt(charPosition);
switch (currentChar)
case 'A':
aCount = aCount + 1;
break;
case 'E':
eCount = eCount + 1;
break;
case 'I':
iCount = iCount + 1;
break;
case 'O':
oCount = oCount + 1;
break;
case 'U':
uCount = uCount + 1;
break;
default:
nonVowel = nonVowel + 1;
charPosition++;
Hope this works fine.
Sudha

Downloaded Premier Elements 30 minutes ago. It will not open and install on my windows 7 machine. Please advise!!!!!!!

Very disturbing download process. First click to downlload Photoshop Elements trial was blocked because there was malware attached. This happened twice.
Second attend to download PS elements worked. But the file would never open and install.
Then tried to download Premier Elements Trial. No malware, but file would not open and install.
Adobe is better than this. What is going on?????

Rgregso51 please make sure to download the trial for Premiere Elements 12 from Adobe - Download free trial version Adobe Premiere Elements 12 | Adobe.

HT1349 Can I log onto my mothers account to help her with contacts and calendars without pushing all of my info

Can I put contacts and calendar notes in for my mother, and push/sync those without sending all of my info to her?

Settings app > Mail, Contact,Calendars > delete her account, than add yours back in. Removing the account from your phone will not effect the iCloud stored contents. Her phone's contact list should be fine.

Ipod Mini will not update and sync without mac freezing up

My ipod mini (4GB) cannot hold all my music so I have to single handedly sort out music i want and don't want. So, one day i decide to click 'restore' so i can just drag and drop playlists. Ever since then itunes freezes up when i plug it in and now it won't recognize it. The only way i can get itunes to respond is by unplugging my ipod mini. Then itunes is fine, like nothing happened. Also i have the most up to date itunes software. i don't know what to do.
Please help!!
ComputerGuy1225

Welcome to Apple Discussions!
When the iPod is connected to your computer and in iTunes go to edit-->preferences (in iTunes). Hit the iPod tab. Is it set to automatically update?
Also, on her computer, try this...
Strange iPod behavior when Windows confuses iPod with network drive
btabz

Help! not alert and notification for sms incoming

All sounds of my IPhond working, but if I recive text or imessage there is no alert and no notification (ther isn't the little number near the icon). In general setting the sound are activate..
What's the problem??

I have the same problems so did the reset.
Now I have lost all my text messages. Any idea I how I can get them back?

I cant back up my iphone from itunes because my phone screen is not reachable and neither without itunes because dcim file seems empty when i connect the phone to the computer with usb

please help

Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

How Do I Convert Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview and Back Without Reinstalling Windows?

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

Howdy,
Much like in Windows 8 and Windows 8.1, Windows 10 provides you with experience that allows you to convert your Windows 10 Pro Technical Preview to Windows 10 Enterprise Technical Preview without having to reinstall Windows.
Why would I need converting my Windows SKU (edition)
Currently, you may need this to fix issues with Windows not synchronizing browser favorites between different editions. For example, if you're using Windows 10 Enterprise Technical Preview in a test environment at work and Windows 10 Pro Technical
Preview at home, you won't see favorites added on Enterprise edition at home and vice versa. All the links added on Pro edition while browsing web at home won't appear on your work PC.
To convert Windows 10 Pro Technical Preview to Windows 10
Enterprise Technical Preview:
1. Press WindowsKey+PauseBreak and select Add Windows Features at the bottom left corner of System window.
2. In the Add features to <OSName> window click to add Product key and type in the
public product key for Windows 10 Enterprise Technical Preview available here.
Voila! Your Windows 10 Pro Technical Preview is now converted to Windows 10 Enterprise Technical Preview.
To convert Windows 10 Enterprise Technical Preview to Windows 10 Pro Technical Preview:
Following the above procedure does NOT reveal Add features to Windows 10 link button in System window.
We could try doing this through DISM tool.
1. Press WindowsKey+X and select Windows PowerShell (Admin) or Command Prompt (Admin).
2. At the command prompt type dism /online /Get-CurrentEdition to obtain information about the current edition of Windows:
PS C:\Windows\system32> dism /online /Get-CurrentEdition
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Current edition is:
Current Edition : Enterprise
The operation completed successfully.
PS C:\Windows\system32>
3. Check which versions you may switch to:
PS C:\Windows\system32> dism /online /Get-TargetEditions
Deployment Image Servicing and Management tool
Version: 10.0.9926.0
Image Version: 10.0.9926.0
Editions that can be upgraded to:
(The current edition cannot be upgraded to any target editions.)
The operation completed successfully.
Looks like Windows 10 Enterprise Technical Preview cannot be downgraded.
To downgrade edition from Enterprise to Pro, you can trick Windows setup into thinking it is running on Pro by going to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion and changing the following keys:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Enterprise"
"ProductName"="Windows 10 Enterprise Technical Preview"
I believe for Pro edition this must be
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"EditionID"="Professional"
"ProductName"="Windows 10 Pro Technical Preview"
After that you may run in-place upgrade using Windows 10 Pro Technical Preview Setup disc.
Note, if you can't find the Add features to option in Control panel, press Windows Key + R and type control /name Microsoft.WindowsAnytimeUpgrade.
If you want to, you could change Windows edition via DISM servicing tool by running:
DISM /online /Set-Edition:Enterprise /ProductKey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX /AcceptEula
In case you can't access official page for
Windows 10 Enterprise Technical Preview download, or the page that contains
product key for Windows 10 Pro Technical Preview, you can always obtain the product key by looking for
F:\sources\pid.txt on the Windows Setup disc.
Well this is the world we live in And these are the hands we're given...

HELP! Controlling size and position of new window from applet

I am totally new to using java. I am making use of a java applet for showing images. Each image may be clicked to open a higher res image in a new window. I want to be able to control the size and position of the new window. The windows need to be different sizes for each image - a couple may be the same size but some will be different.
I found this:
<<<<Yes it can (but not after the window has been created). JavaScript can open documents in a new (or an old) window with eg.
<script>
window.open("document.url", "window_name", "toolbar=no,statusbar=no,scrollbars=no,resizable=no,width=600,height=400");
</script>
The new window will have only the title bar and the frame around the document, nothing else.
That can be made a function and called from an applet through liveconnect.>>>>
from a search re window sizes but I need more explicit help with how to put it into my document! This looks like it might work with the exception it doesn't give a position but I could even live without that.
Am I correct in assuming tha this script goes in the <head> of the document? If I have several different sizes, I would need to have several different but similar scripts but with different window names?
Do I substitute the actual url where it says "document.url"? What about "window_name"? And what does liveconnect mean?
Here is a sample from the applet coding I have in place:
\\\\\<param name="image2" value="barneygargles_th.jpg">
<param name="link2" value="http://www.barneygargles.com">
<param name="statusmsg2" value="Barney Gargles Family Restaurant">\\\\\
Please, I hope someone can help with this! This is driving me crazy!
Thanks to anyone who can walk me through this one!
Linda

I have been searching the internet for more information and it appears that others have been faced with this problem.
I have found a couple of possible answers but I am not sure how to do them.
http://forums.macosxhints.com/showthread.php?t=64059
http://forums.macrumors.com/archive/index.php/t-119915.html
The first link seems more relavent but I am not sure how to do what it is talking about.
Can anyone help?
I have recently moved from a PC to MAC and this problem is really getting in the way of my work.

Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .

Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M.

I lost firefox after updating. It will not open and a pop up window comes up saying "Your computer must be restarted to complete a previous upgrade of firefox. Do you want to reboot."

Nothing happens after reboot, continue to get the same message. If try to uninstall or reinstall firefox get same message and cannot uninstall or reinstall. Any solutions for this problem?
This is on a Sony Vaio with windows 7. I3 processor

Try a clean reinstall.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
* Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Help: Fix Note Velo and Length without Transform-Window

Similar Messages

Maybe you are looking for