Help I am a muppet
Hi
I am looking for some help setting up my work E mail account on my curve 9300, totally new to BB and no idea where to start, I do know that my company do not have a BES so what to do. Wizard only allows me to use a BES no other way. My company are dinosaurs and have no clue. I use Outlook Web Access through an Exchange server. That is all I know.
An idiots guide would be great if it is possible
Also not sure what a carrier is
Many thanks
Russ
russellmartin wrote:
Wizard only allows me to use a BES no other way. My company are dinosaurs and have no clue. I use Outlook Web Access through an Exchange server.
If you do not have BES, you will need BIS, BlackBerry Internet Service, from our service provider.
Read this for setup: http://www.blackberry.com/btsc/KB03133
russellmartin wrote:
Also not sure what a carrier is
Carrier = service provider = mobile company you pay or someone pays for voice service on that device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Convert applescript to javascript
I have a file which contains applescript. I need to convert this script to javascript and run it in my windows. Please help!!!
Muppet Mark seems right.
Translating APS to JS is someway doable. Unless the APS script uses cmd that don't have matching items in JS, it shouldn't be a problem.
However, I don't think a script may convert all by itself an APS script to JS.
For generic commands such as "set x to" or "display dialog", it's quite easy but how to translate "whose", "starts", "first", "last"....?
What if the script goes for file on the system using a tell application "Finder" block ?
In my opinion, the translation process can only be efficiently done by a someone knowing both languages.
Can I help you ?
Loic -
Help me muppet has an ipod video
i have recently reloaded my pc and have got all my downloaded tunes back on itunes but icant get my laptop to download my play lists how do i do this without the lengthy process of sitting down and doing it by hand can anyone help me plaese desperately seking answers
exrct,
Depending on how you backed up your iTunes information, you may be able to restore your old playlists. If you did a complete backup of the iTunes folder in My Music, then all you need to do is open the alternate library and point it back to your old library file (article on how to do this listed below).
If you only backed up your music and did not make a special playlist backup, then unfortunately, you will have to recreate your playlists.
Here are some articles that may help you restore your playlists:
About the iTunes Library file
How to open an alternate iTunes Library file
Saving a copy of your playlists
Hope this helps,
Jennifer B. -
i want to fade in or out music to put heaps of music inb one clip please help
I'm not sure what you mean about fading the instrument and not the notes. I just want to fade out one note/per instrument at the end of certain passages. Care to expound?
In general, MIDI does not provide a mechanism to control the volume of individual notes.
In MIDI (and sequencer terms), a note has a note on, a note number (which key was pressed) and how hard you hit that key (velocity). Then a corresponding note off. There is nothing in a note specification that let's you control the volume of a note through it's duration.
In MIDI terms, you can use a controller MIDI message, typically #7 which is used for volume, and modify that over the time the note is playing. But this is controlling the volume of the instrument not the individual notes - the same as turning up and down the volume on the instrument. All notes that the instrument is playing are affected equally - if you are holding a chord, the entire chord will ramp in volume. You cannot just ramp the volume of one note within the chord using this method.
(The closest MIDI can get to controlling individual notes volume is with polyphonic aftertouch, but this is not often supported and is a more advanced technique - given that you are new to this I'm going to ignore it for now to avoid over-complicating things. I mention it to stop all the people chiming in with "you're so wrong Beejay you muppet you can do this with poly aftertouch don't you know anything" blah blah).
Is that more clear?
Also, if you wouldn't mind, could you give me a step by step on opening the hyperview in the piano roll?
Open the piano roll, select View -> Hyperdraw -> Volume.
You can click/draw in it with the pencil tool to create MIDI volume (CC#7) changes. -
Need help with " Number guessing game " please?
This is what teacher requires us to do for this assignment:
Write a program that plays a simple number guessing game. In this game the user will think of a number and the program will do the guessing. After each guess from the program, the user will either indicate that the guess is correct (by typing �c�), or that the next guess should be higher (by typing �h�), or that it should be lower (by typing �l�). Here is a sample output for a game. In this particular game the user thinks of the number 30:
$java GuessingGameProgram
Guess a number between 0 and 100
Is it 50? (h/l/c): l
Is it 25? (h/l/c): h
Is it 37? (h/l/c): l
Is it 31? (h/l/c): l
Is it 28? (h/l/c): h
Is it 29? (h/l/c): h
Is it 30? (h/l/c): c
Thank you for playing.
$
This program is implementing a binary search algorithm, dividing the range of possible values in half with each guess. You can implement any algorithm that you want, but, all things being equal, binary search is the best algorithm.
Write the program so that the functionality is split between two classes: GuessingGameProgram, and NumberGuesser.
GuessingGameProgram will only be used for its main function. It should instantiate a NumberGuesser, and it will be responsible for the loop that notifies the user of the next guess, reads the �h�, �l�, or �c� from the user, and sends an appropriate message to the number guesser accordingly.
The guesses themselves should all be generated by the NumberGuesser class. Here is a diagram of the members and methods for the class. Notice that the members are unspecified. Feel free to give your NumberGuesser class any members (which we have also been calling fields, or instance variables) that you find useful. Make them all private.
NumberGuesser
NumberGuesser(int upperLimit, int lowerLimit)
int guess()
void higher()
void lower()
The constructor should take two integer arguments, a lower and upper bound for the guesses. In your program the constructor will be called with bounds of 0 and 100.
The guess method should return the same value if it is called more than once without intervening calls to the lower or higher methods. The class should only change its guess when it receives a message indicating that its next guess should be higher or lower.
Enjoy. Focus your attention on the NumberGuesser class. It is more interesting than the GuessingGameProgram class because it is a general-purpose class, potentially useful to anybody who is writing a number guessing game. Imagine, for instance, that a few weeks from now you are asked to write a number guessing game with a graphical Java Applet front end. If you NumberGuesser class is well written, you may be able to reuse it without any modifications.
I'm new to JAVA and I'm set with my 2nd homework where I'm so confused. I know how to do something of this source in C language, but I'm a bit confused with Java. This is the code me and my classmate worked on, I know it's not 100% of what teacher asked, but is there any way possibly you guys could help me? I wrote this program if the game is played less then 10 times, thought I would then re-create a program without it, but now I'm confused, and my class book has nothing about this :( and I'm so confused and lost, can you please help? And out teacher told us that it's due the end of this week :( wish I knew what to do. Thank you so so much.
Here's the code:
import java.text.*;
import java.io.*;
class GuessingGame
public static void main( String[] args ) throws IOException
BufferedReader stdin = new BufferedReader(new InputStreamReader( System.in ) );
int guess = 0, limit = 9, x = 0, n, a = 0 ;
double val = 0 ;
String inputData;
for ( x = 1; x <= 10; x++) //number of games played
System.out.println("round " + x + ":");
System.out.println(" ");
System.out.println("I am thinking of a number from 1 to 10. ");
System.out.println("You must guess what it is in three tries. ");
System.out.println("Enter a guess: ");
inputData = stdin.readLine();
guess = Integer.parseInt( inputData );
val = Math.random() * 10 % limit + 1; //max limit is set to 9
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(0); //format number of decimal places
String s = nf.format(val);
val = Integer.parseInt( s );
for ( n = 1; n <= 3; n++ ) //number of guess's made
if ( guess == val)
System.out.println("RIGHT!!"); //if guess is right
a = a + 1;
System.out.println("You have won " + a + " out of " + x + " rounds");
System.out.println(" ");
n = 3;
continue;
if (n == 3 && guess != val) //3 guesses and guess is wromg
System.out.println("wrong");
System.out.println("The correct number was " + val);
System.out.println("You have won " + a + " out of " + x + " rounds");
System.out.println(" ");
continue;
//how close guess is to value
if ( guess == val - 1 || val + 1 == guess) //Within 1
System.out.println("hot");
else if ( guess == val - 2 || val + 2 == guess) // Within 2
System.out.println("warm");
else
System.out.println("cold"); // Greater than 3
inputData = stdin.readLine();
guess = Integer.parseInt( inputData );
//ratings
if ( a <= 7)
System.out.println("Your rating is: imbecile.");
else if ( a <= 8)
System.out.println("Your rating is: getting better but, dumb.");
else if (a <= 9)
System.out.println("Your rating is: high school grad.");
else if ( a == 10)
System.out.println("Your rating is: College Grad.!!!");Try this.
By saying that, I expect you ,and your classmate(s), to study this example and then write your own. Hand it in as-is and you'll be rumbled as a homework-cheat in about 20ms ;)
When you have an attempt where you can explain, without refering to notes, every single line, you've cracked it.
Also (hint) comment your version well so your tutor is left with the impression you know what you're doing.
In addition (huge hint) do not leave the static inner class 'NumberGuesser' where it is. Read your course notes and find out where distinct classes should go.
BTW - Ever wonder if course tutors scan this forum for students looking for help and/or cheating?
It's a double edged sword for you newbies. If you ask a sensible, well researched question, get helpful answers and apply them to your coursework, IMHO you should get credit for doing that.
On the other hand, if you simply post your assignment and sit there hoping some sucker like me will do it for you, you should be taken aside and given a good kicking - or whatever modern educational establishments consider appropriate abmonishment ;)
I'd say this posting is, currently, slap bang between the two extreemes, so impress us. Post your solution in the form you intend to hand it in, and have us comment on it.
Good luck!
import java.io.InputStreamReader;
import java.io.BufferedReader;
public class GuessingGame
public static void main(String[] args)
throws Exception
BufferedReader reader= new BufferedReader(
new InputStreamReader(System.in));
NumberGuesser guesser= new NumberGuesser(0, 100);
System.out.println(
"\nThink of a number between 0 and 100, oh wise one...");
int guess= 0;
while (true) {
guess= guesser.guess();
System.out.print("\nIs it " +guesser.guess() +"? (h/l/c) ");
String line= reader.readLine();
if (line == null) {
System.out.println(
"\n\nLeaving? So soon? But we didn't finish the game!");
break;
if (line.length() < 1) {
System.out.println("\nPress a key, you muppet!");
continue;
switch (line.toLowerCase().charAt(0)) {
case 'h':
guesser.higher();
break;
case 'l':
guesser.lower();
break;
case 'c':
System.out.println("\nThank you for playing.");
System.exit(0);
default:
System.out.println(
"\nHow hard can it be? Just press 'h' 'l' or 'c', ok?");
continue;
if (guess == guesser.guess()) {
System.out.println(
"\nIf you're going to cheat, I'm not playing!");
break;
private static class NumberGuesser
private int mLower;
private int mUpper;
private int mGuess;
NumberGuesser(int lowerLimit, int upperLimit)
mLower= lowerLimit;
mUpper= upperLimit;
makeGuess();
private void makeGuess() {
mGuess= mLower + ((mUpper - mLower) / 2);
int guess() {
return mGuess;
void higher()
mLower= mGuess;
makeGuess();
void lower()
mUpper= mGuess;
makeGuess();
} -
Premiere and Audition HELP needed!!
I'm either being a muppet or it's just not working as intended!
Trying to do a simple export of a 10 min sequence from Premiere to Audition so I can (obviously) do the audio mix. When I do that everything goes fine except, there are NO clips in my Audition timeline! I have blank multitrack mixer
Absolutely no idea what to do?!Hi shooternz, thanks for the reply :-)
Well, the reason for is that the funciton is supposed to give handles! Give me the handles!
More specifically, I am going in to audition for one reason only - the time is takes for the Noise Reduction to kick in (since it has no pre read). But thats a whole other can of worms (and workaround debate).
Yes, all the other clips have handles :lament: -
Hi all I'm Currently recieving Nuisance Calls via a Blocked number is there anyway I can stop my Iphone accepting Blocked Numbers? Thanks
There is a way! I'm very happy to share this and hope it helps those who find themselves plagued, as I was.
I have been getting nuisance calls for months from some muppet, who hides his phone number before he calls at 3am. I need to keep my phone on, in case any of my immediate family have an emergency. I'm sure many have the same problem, just turning off the phone is not an option. I have been to two or three shops to ask the experts and none could offer me a solution. I was on the verge of tring to jailbreak my phone or even get rid of it to get an andriod one...That's how bad things had become.
Anyway, this is my solution, which I found by trawling through page after page on the internet, for ages and trying various other solutions first. I have an iPhone 4S and the operating system is 6.1.3 and I am in the UK, on Orange, or EE as we should now call it. I cannot promise it will help everyone, but it works for me.
Go to Settings, Do Not Disturb and switch this on. Underneath here, go to Notifications, then Do Not Disturb again. Then Scheduled and set the times you want the restrictions to start and end. For example, I use 7pm to 8am, so that I know I won't get nuisance calls during this period, but whatever times work for you. Underneath, it says Allow calls from and you can select your favourites. If you haven't saved any of your contacts as Favourites, do so, it's very easy. Just go to contacts, open one and underneath the number there is a button to Add to favourites. Repeat for all close friends and family you want to be able to reach you at any time. All your favourites should be allowed to call. I think you can have 50 numbers in the favourites. But any unknown caller should be simply sent to voicemail.
Apple have had some previous issues with the Do Not Disturb feature and to be honest this didnt work 100% of the time for me. If you find the same, don't give up. I suggest you do as I did at this point and use an app called Call Bliss, which seems to have cracked it. (I have NO connection to them and it's no skin off my nose if you use this app or not). There may be other apps that do the same, or even better for all I know. You have a free one day trial then it's £3 if you want to continue to use it. For me, £3 to solve the problem was money very well spent. If you need this app, download it, then do as suggested above to the point where it says Allow calls from and this time you select Bliss Exceptions. Follow the instructions in the app.
There are two modes, I use suppress mode, which allows all calls to get through except those from unknown callers and those specified by you. I believe the other mode blocks all calls, except those you specify. Please note, the app only works when the iPhone is locked. Your lock might come on after the phone is not used for 5 minutes or so, or you can lock the phone by single clicking the on/off button (not holding it down).
I hope this helps anyone as much as it has done me. -
Firewire and audio interface problem, please help
Hi all
I'm not being lazy, i've spent hours trawling through forums and google trying to find a fix but cant so hope someone here can help.
Basically, I've been using my Macbook for Logic Studio with an audio interface (Motu 8pre). This was connected via firewire 400 to firewire 400 and worked absolutely fine no problems.
I've recently got a Mac Pro. I've installed Logic onto it, my Motu 8pre driver etc etc and noticed that the firewire socket on the Mac Pro is different. I've been on the Motu website and quite clearly they say that a firewire 400 to firewire 800 cable will work fine with modern macs (this can be seen in more detail at bottom right of this web page http://www.motu.com/products/motuaudio/8pre
I've bought one of these cables and plugged them into my interface and Mac Pro respectively, switched on the device as i have been doing for the past year with my Macbook, but the MacPro just wont seem to recognise it.
How can I get this interface to work with my Mac Pro?
I've tried connecting to different ports on back and front, restarting machine but it just wont work.
Am I missing something simple here?
Can anyone help?
Thanks in advance
AdamOk its official I AM a muppet.
Went onto motu site again and noticed they released an update driver for snow leopard. Downloaded it and it works fine.
Fixed.
Thanks -
I've just installed a AMD Athlon 3000XP (FSB 333) to my MSI KT6 Delta Mainboard and Core Centre tells me the CPU is clocking at only 1300MHz. The Bios has defaulted to CPU Clock = 100 MHz and the Core/Bus Ratio has defauted to Auto (although Core Centre says 13). This processor is supposed to be supported at 2167Mhz core speed (tested OK at 166 and Auto settings). How come when I change the bios to CPU Clock = 166 and Core/Bus Ratio to Auto (or any other setting for that matter) my desktop locks up on boot-up?. Can anyone help me with the correct set-up to get my CP :confused2:U running at the correct speed? Hopefully this makes sense to someone and I'm not being a complete muppet! Thanks Andy.
1. 350W says nothing, read the q-tec warning about 550W or more.
Specs (xxA/3.3V, xxA/5V, xxA/12V, xxW combined power)? There's a sticker on your psu where you can find them.
2. Temp may look fine but if the headsink isn't mounted properly hot-spots may occur. The temp-diode doesn't detect them but your system will not work.
But first of all I would suppose that your psu is too weak. -
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
Table1:
ou store point
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
I have to insert table1 to table2 by splitting into every 143point and assing serial number for every 143 from parameter.
in aboce example we can split 3 time 143 like below table2 sample.
Table2
ou store point serial_number
LS LIB1 50 101
LS LIB1 93 101
LS LIB1 107 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
i tried below procedure its not working.
table may have any order like below.
Table1:
ou store point
LS LIB1 200
LS LIB1 50
LS LIB1 100
LS LIB1 79
then table2
ou store point serial_number
LS LIB1 143 101
LS LIB1 57 102
LS LIB1 50 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
create or replace procedure assign_serial(from_num number,to_num number) is
bal number(10);
begin
bal := 0;
for c1 in(select * from table1)
loop
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;
end;
How to split and assign serial number,please hELP..after giving serial num i have to change points in table1 to 0.The problem for SUm and split for every 143 is ,different OU and store is there.we have to know for which store points we earned serial number.
i hope this below logic little satisfy except assign cardnum,please........ check and currect the logic
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
--variable used and bal
for c1 in(select * from table1)
loop
used := c1.points;
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop; -
Help my safari doesnt open and gives me a crash report
help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1
There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
Apple Mini DVI to Video Adapter is not working. Please Help...
I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...
Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko -
Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee
right,
ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
please help....................You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
good luck.
x -
PSE icons instead of the photo. I need to view photos at a glance. Please help me????
Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
LeicaHi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian
Maybe you are looking for
-
Problem in uploading an excel file in wd abap
I am trying to upload an excel file in wd abap but on uploading it shows me the data in the form of some codes but when i try to do the same thing using text file it works well.Plese refer the code . METHOD onactionon_upload . TYPES : BEGIN OF itab
-
Error code -69 when trying to sync iTunes and iPod
When syncing to iTunes, I receive error code -69, and will not complete the sync. Please help. Using Windows XP.
-
Hello, I have a Canon Legria FS19 Camcorder with a full 8GB internal memory. I'm trying to capture the footage (.MOD and .MOI files) in iMovie to later edit in Final Cut Pro. When I select "Import from Camera" iMovie tells me it is searching for my c
-
Hide or show the Artist and Album columns Command +B not working -itunes 11
Command +B Shortcut Hide or show the Artist and Album columns is not working no respond..-itunes 11 my desktop working but not my laptop MBA. why is that? anyone help me?
-
I heard a while back that you can lock in a remote to a specific mac, is this true and how?