HELP! i got a problem with my mobo 945GCM7-L

HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???

Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you.

Similar Messages

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help ! :(

Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help !

Have you tried signing out of your iTunes & App Store on your device and then back in again - Settings>iTunes & App Store, click on Apple ID, then on Sign Out. Then sign in again and see if it accepts the password.
If that doesn't resolve the issue, try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Slide to Unlock screen will display. See if the problem is resolved.
Cheers,
GB

Why can't i downgrade to mavericks? i have got some problem with yosmite. i would like to downgrade to mavericks.please help me how to get it ? thanks

why can't i downgrade to mavericks? i have got some problem with yosmite. i would like to downgrade to mavericks.please help me how to get it ? thanks

Hi here are a couple of links you may find useful, the first is if you have made a time machine backup, the second if you have not.
http://osxdaily.com/2014/10/22/downgrade-os-x-yosemite-to-mavericks/
http://www.macworld.co.uk/how-to/mac-software/revert-back-mavericks-from-yosemit e-3581872/

I got some problems with my 3D in Photoshop can someone help me ?

I got some problems with my 3D in Photoshop.I press the 3D button and its showing me nuthing.If someone can help me ...Please... Thanks.

Yes, you have to have a document open or you can open a 3D file (OBJ, 3DS, DAE, LMZ, or U3D)
If you open a document and then open the 3D Panel there are a variety of create 3D options.

Problems with my Mobo - Hangs at "Testing Real Time Clock" - Whats up?

Specs:
MSI K7 Master - MS-6341
AthlonXP 1800+
512 PC2100 DDR
40 gig Maxtor or Seagate 7200rpm, 2mb cache - tried both
Pine 56x CD Rom
eVGA GeforceFX 5200
Generic 420watt PS AND Antec TruePower 430 watt PS - same results
Alright, I can access the BIOS, etc. but after the first startup screen (with ram, processor type, IDE config, etc.) the screen just has a underscore blinking at the top left...and the error system says Testing Real Time Clock - Ive basically narrowed it down to the IDE connectors since I can unplug the hard drives and it gets past that section and asks for a boot drive - anyone have similar problems? I know he board is old but its for the family and Im stuck right now and I got some anxious members of my family wanting to know whats up with the system - any help will be appreciated...
It should be noted that I was able to install/run Windows for a couple of days - then I got stability problems which was from the BIOS overclocking my ram past spec but I fixed that and Windows was fine but now I cant boot back up and it cant be virus or bad hard drive because Ive tried more than one - some people who also have this problem can sometimes boot to their OS but its usually not the case...thanks again for the suggestions..
Things Ive Tried:
Replaced the CMOS battery
Cleared CMOS
Change IDE channels
Tried just the hard drive
Removed jumper from hard drive
Cleared CMOS
Reseated the ram
Reseated Video card
Cleared CMOS
If someone can find a working solution for this, Ill give them something in return - like some DVDs or cash or something, I really need some help..
- Adam/vicks

No problems with the mobo physically - I got it new from a trusted guy on some forums I goto (anandtech) new from an RMA - still sealed...
I have it running....again....it doesnt like that 1st IDE channel for some reason - Ive restarted/rebooted a few times and nothing has happened so hopefully its fixed but still not cool - Im almost 100% sure it will happen again...

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or ac

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, Ralfar

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

ive got this problem with itouch 4th gen when im trying to upgrade my ios to ios 6.1.3 when it is verifying it suddenly shutdown and it keeos on blinking with the logo and i cannot open it...what is the main cause of thst..tnx

- Reboot the computer
- Try DFU mode and then restore/update
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Delete the update file so that new one has to be download.
IPSW file location for Mac and Windows
- Try on another computer to help determine if you have an iPod or computer problem.

I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?

I have got a problem with my screen... my screen becomes blurred, horizontal streaks. What can i do ?

Hi saigon88,
If you are having issues with the display on your MacBook Pro, you may find the following article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Got a problem with BIOS in my board MSI 785GM-E51

i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
i try to disable a onboard graphic on BIOS,but i not find it.
and last i try to update BIOS to v2.4 n' not work too.
this a example;

Quote from: Bas on 08-March-10, 21:21:36
You do not need to disable the onboard.
As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
Make sure your card is seated correctly, else it will work but at lower number of lanes.
What program is telling you it's 8x?
GPU-Z

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

At the creation of MCD we got the problem with Request

Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
Creation of CD
we gave these entries
1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
 ->SyncBOs Expect Initial Value
 ->Data Visible to all
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
 "Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
 ->Continue
 ->Create Request
 ->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep Painnamaneni

Hi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all
Every thing is fine. We need to check Link to SAP MI Home page check box
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.

can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick

R7770-PMD1GD5 got a problem with assassin's creed 3

bought this card
and got this problem with max setting.
This happens when I turn AA to very high. What is the problem?

Quote from: knight_9 on 14-December-12, 14:37:35
No, this only happens with AC3. I tested it with Far Cry 3 which the only graphic intensive game I have at the moment. I can max out the setting with FC3, the game is choppy but I can't reproduce the case.
First of all, the market is full of buggy games.
Secondly, R7770 is a mid-range (cheap) graphics card.
With only 128 bits memory interface, don't expect to play complex games at high resolutions, 8X AA and great FPS values.
To get an idea, GTX 560 is faster than R7770.
GTX 560 is a good GPU, but not a great one.

HELP! i got a problem with my mobo 945GCM7-L

Similar Messages

Maybe you are looking for