Help in a practice

Hi:
I'm using captivate 4 to create a e-learning course about openoffice writer, but i have one problem, I like to know if you can help me.
First of all, sorry for my poor english.
I have some practices embebed in one course, the student have 3 attempts to make the practice, if it's not correct the program solves it and put a check mark in the navigation menu. But if the student makes the practice correctly is not marked on the navigation menu because there are 2 or 3 slides where the program explain how to do the practice and these are not visited.
Do you understand me? and...can you help me?
Thanks
Santi

One of my projects gives the same error. When I use the "go to source" menu selection in the compiler output message window, it takes me to the first line of bpel file. I'm guessing there's an invalid URI in a wsdl somewhere but I haven't the faintest idea how to find it if the compiler won't give the proper error line number. I did validate all the wsdl's individually and they are apparantly fine. Not sure what to try next.
Bret

Similar Messages

Need help about best practices - Add DI or add WP

Hello Experts,
I am facing on a strategic problem.
We want to add new application Server (= Instance Dialog) to our CI/DB.
But I am note sure that is the good way!
Is it better to add New Work Process in existing Dialog Instance?
Or, should we create another DI in the same physical host?
I have to explain the both scenarii with features.
Could you please help me to have the best practice in this situation.
Thanks a lot for your help.
Regards
Hocine NAÏ

Hi Sunil,
Thanks a lot for your reply. We have Sap ECC6 u2013 AIX 5.3. Today we have 3 AS (2 Linux sans one Aix). The goal is to eliminate the Aix AS. In each AS we have 5O WP. What is the highest number of WP allowed?
And we have two opinion within my company :
==> The first is we have to add another AS in the same server than existing one. It was justified by the fact that we have enough available memory!
==> The second is to increase the both linux AS by adding 25 WP by AS. I am not sure but I read that the WP limitation number is 600! Is it right.
Thanks a lot for your help
Regards
Hocine

Help on ps practice

could i get any practice notes with u sir plz provide me so that i could practice on system

Hi Sultan,
Please refer the links as menioned below
http://help.sap.com/saphelp_47x200/helpdata/en/04/926eae46f311d189470000e829fbbd/frameset.htm
http://www.sapprojectsystem.com/
Here you will find number of useful PDF documents
Hope this helps.
Regards
Tushar
P.S. Reward points for useful answer.

Help: best Lightroom practices using a Drobo

Hello,
I apologize in advance for what will be a long post. I'm a newbie when it comes to Lightroom, so forgive me if these questions seem elementary.
Background: I have a Drobo b800fs, connected to our network via gigabit ethernet. I have roughly 225,000 photos on the Drobo - stored by year and then by event. We're adding roughly 30,000 photos per year to the system. Searching for specific photos is an absolute nightmare at times. That is why I am looking at purchasing Lightroom. It'll be a massive project, but if we can add tags/keywords to our photos, the search feature would then be a breeze. Not sure if it is important to note, but I dont anticpate using Lightroom to alter the images much (if at all) - it'll mainly be used a giant search tool. Assuming Lightroom is my best option for tagging all of these photos, here are some questions I have...
1) Can I store the catalog file on the Drobo, in the same location as the original images? My reasoning for this would be so that I could access that catalog file from any machine in our office that is running Lightroom. If not an option, what is the best location for the catalog file to reside? Obviously speed would be a big factor here.
2) Can I run one master catalog for all of our photos or would that be too cumbersome? If not, would it be better to run a separate catalog by year? Obiviously, the more catalogs I have, the more searching I have to do... but I also don't want to wait 5 minutes for a enormous catalog to load.
3) What happens if a drive fails on drobo and I have to insert a new one? When the drobo regenerates files, will that screw up the catalog association with the images?
4) I currently have all original photos on the Drobo backed up to separate external WD hard drives (one for each year of photos). To speed up the keywording project up, could I hand these drives out to my team members and have them run Lightroom and keyword all of the photos on each respective drive, and then merge all the catalogs onto the Drobo without having to copy over all the original photos (since they are already on the Drobo)?
Thanks for any tips, opinions, and help you can provide!

1) The Lr catalog cannot be on a network drive, but photos can. Catalog and photos do not have to be on the same drive.
Best option for the catalog is the fastest drive that you have, i.e. an internal SSD drive.
Lr constantly writes to and reads from the catalog. That means that the speed of the drive hosting the catalog is a big factor in Lr performance.
2) It seems there is no practical limit for how many photos can be in one catalog. There were posts on this forum of people / organizations / companies having about 250 000 photos in one catalog.
Having one catalog is the preferred method. For instance you cannot search across several catalogs; a search is always confined to one catalog.
Opening a huge catalog should not take very long, since Lr does not load the whole catalog but addresses only the images opened by folder or by collection.
If you have several catalogs, and you want to switch catalogs, Lr will close down and open up with the new catalog. That might take longer than opening Lr in the morning with one big catalog and then not having to switch catalogs.
3) It shouldn't as long as there is no drive letter change involved. I don't use drobo , so can't say for sure. But I had one of my RAID 1 external drives rebuild one disk, and it did not screw up the catalog.
The catalog stores - among all the other things - the name and location of the image files. As long as these two don't change, the catalog will be fine.
4) Several people cannot access one and the same catalog at the same time. So, several people working on the keywording project would necessitate that each person creates a separate catalog.
The keywords could then be imported into the master catalog. Since importing the sub-catalogs would create duplicate images, the best method for importing the keywords would be: Once each sub-catalog is completed with keywording, the keywords are "written to file" (via the feature <save metadata to file>), and then in the master catalog the keywords would be imported by reading the keywords from file (via the feature <read metadata from file>).
There is one caveat with this: <Read metadata from file> overwrites the catalog data for the images in question. Thus it would be mandatory that no work is done in the master catalog before the keywords are "read from file". After that, new keywords can be added in the master catalog, or photos can be edited, etc.

Help with most practical format/settings please!

Hi Everyone out there!
I'd really appreciate some spelled-out advice as I have only ever used FCP with a DV Pal camera for high end stuff and thus also known how to set a sequence up and capture stuff but only for that format!
Right!
I have been supplied a batch of 40 small video clips taken from a photo camera. They were MPEG 1 muxed, and I have demuxed them with Mpeg streamclip.
They are:
Video: 224 Mpeg 1, 640x480, 30fps, 8Mbps
Audio: 160 Pcm stereo, 32khz, 1.02Mpbs
I have been asked to edit a little promo film out of them and then export it suitable for uploading to facebook / use on the web. I can't seem to find out what settings are optimum for facebook uploading seeing as I want to retain as much quality as possible given the initial format supplied in!
Any help advice would be appreciated. Basically I'm trying to work out exactly what setup the project/sequence should be in. Easy setup doesn't seem to make much sense and I've tried a few settings but each time I start putting clips in the sequence they have to be rendered before playing which makes making this thing a nightmare!
Thanks
Hannah
Message was edited by: Hannah Madsen

I'd save them out as DV .mov's Edit in a dv easy set up. From there you can compress into whatever it is that facebook likes. Sorry, I've no idea about that. Never even visited it.

.CHM Context Sensitive Help - Any Best Practice advice?

Hi,
Using RH9 and generating .CHM as the output.
I need to create context sensitive help that will work at screen level only. The project has around 600 help topics. I know i can autogenerate the MAP file using RH and pass this to development for them to plumb into the system which seems the quickest way. I know I could also manually map the 200 or so topics that refer to each screen in the application but that will take much longer (but will reduce the size of map file).
This is for a version of the help that has already changed i.e, I am now working on another version of the help so there are changes including new topics being added, some removed or renamed etc.
Is it ok to autogenerate on the first build, then import this map file into new updated project?. Any pitfalls I should be aware of before starting or not?
Generally what is others experience?
PDF Boy.

Hi, glad I could help.
There are certain javascript calls which will close the window automatically when focus is shifted somewhere else, but there are gotchas. You will notice Yahoo and some airline sites that have popup calendars face the same problem.
Not all browsers (or older versions) observe those newer calls dependably. So we are stuck with asking the user to close them. If I understand what you want, you could enable the Show button. This would show the Navigation pane and the rest of the topics so your user could proceed deeper. Still, they will have to close the window! Alternatively you could manually put link "arrows" in the top right of the topic and let them navigate to whatever topic you choose. But, that's time consuming and even this trick is not accessed by F1, so I'm reaching here .
What we really need is a browse sequence button that can be placed in the topic itself rather than those dinky arrows in the Navigation pane. I have requested this feature and maybe you could add your request here https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
Thanks!
John Daigle
www.showmethedemo.com

Need help in Report Painter

Can anybody help me in Report Painter? I need a link.
Regards,
Subhasish

Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I have a standard report and it uses a structure to pull the data for the report. I need to create a custom report which uses the same structure, selection screen but a different layout. Could any of u plz advice, if its doable in report painter or just plain abap program?? Also I am interested to know how the report painter stores the actual report?? as ABAP program?? Please help..urgent..
check the SAP help ..
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
I had made couple of SD reports in report painter 4 year ago .. as far as process is concern you have create library , but it deals with information structure which start with s0* , after defining information structure in library it take to select the fields and display them on your out put . information structure have the statistical data most of the time . As i worked on information structure , so31,32,33 .....
I t creates ABAP program like ABAP query creates in background . if you execute Customer Over due analysis or in Co02 cost analysis report or MC* ( MM stock reports ) those are in report painter .
Hope this'll give you some guide line ...
As far as I know about report painter, It create a report in background..Like when you make ABAP query (SQ01, 02, 03 ) .. It will create a report. You cant modify the report . You have to get OSS id in order to do that. if you're ready do it then you can pass it to Memory and can achieve your goal ...
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
The variation objects are coming from the sets.
For example, when you read the report 'Cost Centers: Actual/Plan/Variance'(T-code : S_ALR_87013611), you can find the characteristic 'Cost Center' is set as a 'set variable'. So the cost center in the report left side are coming from the cost center group that you input.
Does any know if we could use Report Painter across two controlling areas? Any documentation available will be great. Yes. When setting up a report in CCA you can have multiple controlling areas. In the General data selection you will have the option for the CA as a selection.
You can also use standard references objects to construct your own reports: libraries, standard layouts, default columns, and row and column models, all in the standard R/3 System, are available for custom reports.
Report Painter report definition requires several Preparatory Steps, depending on the complexity of the report to be generated.
1) Create a library and pick your reporting tables.
2) Create your report
3) define your set up within the report
a)General data selections
b)Colimns
c) rows
d) formulas
Standard layouts are maintained in the IMG "Financial Accounting" under "Special Ledger -> Information System -> Maintain standard layout.
Create libraries, which means assigning the
characteristics
key figures
Predefined columns
For each of these categories you need to select the objects to be used in reports of the specific library. You define the sequence of the objects in the selection lists of the Report Painter in field "Position". Frequently used objects should be at the top of the list.
go to
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22ba743c611d182b30000e829fbfe/frameset.htm
I have created a report through report writer/Painter(GR51). My query here is to link this report to a transaction code. Could you please suggest me how can I acheive this?
Go to SE93 and select the Transaction with Parameters ( Parameter Transaction)
Then in the Transaction field give: START_REPORT
Skip initial screen
Screen 0
In the default value for the parameters give
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT ( Give your Report Group )
If you have any doubt pick any report painter tcode and check in SE93
Follow below steps
1) Execute report through report painter
2) From system status get the program name
3 ) go to se93 and select report transaction and assign
program name .
Is it possible to make bigger the text a I have on a text field?, Im using the screen painter and I need to put the title bigger (as a requirment).
You can define your text as any length.If you are talking about the font,i am afraid you cannot do that.
No, you can not change the size(font) of the text on the dynpro, you can hightlight it, which changes the color to "blue" to make it stand out. You can change this on the attributes tab when double-clicking on the element in screen painter.
what is the sentence that open a screen painter file
Don´t really understand what you mean with "open a screen painter file".
If you are speaking about showing a form generated with the screen painter,
Dim oXMLDoc As New MSXML2.DOMDocument
oXMLDoc.load("Form.xml")
SBO_Application.LoadBatchActions(oXMLDoc.xml)
Dim oForm As SAPbouiCOM.Form
oForm = SBO_Application.Forms.Item("YourFormID")
oForm.Visible = True
regards
vinod

Need help with gunshot effect in FCP

New to FCP and am trying to add a gunshot effect to a short film. Doesn't have to look top notch...just looking for something simple.
I added a muzzle blast for the shooter from detonationfilms.com, which worked great. When i overlayed the muzzle blast, the background was black. I was able to fix this by using Modify>Composite>Screen.
Now I'm trying to add the bullet hitting the victim, but all the shots from detonationfilms.com have white backgrounds. For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? Are there any other websites that have bullet hits with a black background? As I said, I'm not too picky.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple).
Thanks! Much appreciated.

welcome to the family. We're not really here to help you with practical effects and filmmaking tips, we're here to help you with the software. But we'll see who shows up.
For some reason, when I go to Modify>Composite>Screen it doesn't work for white. What I'm I missing? < </div>
Screen drops out black pixels. It's not really the best way to get luma key effects but it's quick and easy for high contrast effects footage that is delivered on superblack. Try a luma keyer to key out the white.
Lastly, I have about a 40 frame shot of the victim collapsing to the ground after being shot. He's wearing a white T-Shirt, which I'd like to stain with blood. Can someone tell me what program would work best for this? I basically think I need to go frame by frame and "paint" the blood on him, but not sure what program is best for this (and simple). < </div>
Should have been done as a practical effect while shooting. A simple squib and blood packet would have been FAR easier to deal with than rotoscoping and hand painting. You need After Effects or, if you have Motion, crack the manual and get set for some long sessions. There is nothing simple about handpainting on a moving object.
bogiesan

The best practice for creating reports and dashboard

Hello guys
I am trying to put together a list of best practice on how to create reports and dashboards using OBIEE presentation service. I know a lot of those dos and donts are just corporate words that don't apply consistantly in real world environment, but still I'd like to know if Oracle has any officially defined best practice or not.
the only best practice I can think of when it comes to building reports and dashboards is:
Each subject area should contain only one star schema that holds data for a specific business information
Is there anything else?
Please advice
Thanks

Read this book to understand what a Dashboard is, what it should do and look like to be used by the end users. Very enlightentning.
Information Dashboard Design: The Effective Visual Communication of Data by Stephen Few (There are a couple of other books by Stephen and although I haven't read them yet, I anticipate them to be equally helpful.
This book was also helpful to me:
http://www.amazon.com/Performance-Dashboards-Measuring-Monitoring-Managing/dp/0471724173
I also found this book helpful in Best Practices...
http://www.biconsultinggroup.com/knowledgebase.asp?CategoryID=337

What is the best practice for uninstalling only some CS4 programs (Win 7 PC)

I recently upgraded from CS4 to CS5.5 and wanted to free up some hard drive space on my Windows 7 PC. I wanted to uninstall only a few programs though from CS4, such as Photoshop, Illustrator, Flash and Bridge. What is the best way to do this keeping in mind licensing, deactivating and properly removing components? I have the original installation disk for CS4 if needed. Thanks for any help!

Best practice: Uninstall everything (including your CS5.5), run the Creative Suite Cleaner Tool, then reinstall the components you need from both editions. CS4 may have a repair/ change configuration mode, but I'd strongly advise against using it, as it will do more damage than good, so use the long way round. It's also the only way to not bust up file associations with an uninstall of CS4...
Mylenium

Best practices for TOC, versus PROJ title, filename

I am seeking "best practice" help from the forum. Say a TOC
is to have numbers as part of the organization, 1,2,3...and topics
will be sub-numbered (as in 1.1, 1.2.1, 1.2.2, etc). I am not aware
of any way to automatically manage this, they must be explicitly
typed in the TOC editor.
I have heard some say that the "view" in the Project should
mirror the view in the TOC. That would imply that folder
organization, filenames and titles would be in sync with the TOC,
and also include the section/chapter numbering.
If you have to make a change and resequence things, or insert
a new chapter between 2 and 3 then there is a LOT of work to do.
I am leaning in the direction of having filenames and titles
be separate from the TOC structure, and not use Field[title] in the
documents to simplify the update process. This would also simplify
updating links within the documents.
However, I am still pretty new with Robo and don't have the
seasoning some of you have with long term effects of particular
organization.
Any help, or best practices that can be shared?
Thanks!
Don

Thanks for your input Colum,
I am actually considering the opposite of your comment - to
have numbering in the TOC but NOT with the Project folders. I
consider the TOC much more volatile and flexible than the folder
structure. As long as one knows what goes with what. So the good
news is there is not a sacrosanct line drawn between the project
names and structure and that in the TOC. This helps. If I have to
resequence section 2 and section 5, I mainly just change the TOC. I
would not have to move or rename any folders in the Project view.
The other part, using the document title (in the topic
properties) to automatically update the topic title in the text I
like quite a bit and I think can make the case with my peers. That
offers a lot of flexibility. As in the above mentioned
resequencing, I would have to access the properties for each topic
in the project folder that used to be in section 2, and edit the
document title to reflect its new position in section 5 (and vice
versa). That is pretty straightforward. I do NOT have to rename all
those folders and files in the Project view.
Thanks again for chiming in.
Don

ESB best practices

I have the following questions on ESB, appreciate your inputs on these
1. Does one ESB map to multiple/one operation in the service provider's wsdl ?
2. How can we implement security if we want to restrict the operations exposed in the ESB WSDL to certain clients?
3. We are planning to expose the routing service to the consumers in a synchronous call, should the ESB define the schema for the consumers or should the ESB use the schema provided by the consumers (assuming more than one consumer)
4. Is it a bad practice to use DB Adapters?
5. Is it necessary to use Service Registry?
Thanks for any help on these

Best Practice is well overstated, it is a term that all the theorist band around to justify why they spend so much time talking about it instead of doing it.
In the real world you have to take a bit from real world and what is so call best practice, because sometimes best practice does not fit your use case.
I would like to understand your 2nd approach. Are you saying your services can call the ESB directly, e.g. via web services?
If this is the case I would go with your first option as this provides guaranteed delivery, and more options at fail over as you can have your process run in a XA transaction so the message is not dequeued until it has been enqueued on the next.
cheers
James

Please help with exam 1Z0-211( General Ledger)

I am taking exam 1Z0-211 ( General Ledger) soon i really need help with some practice questions . If someone has some practices questions and answers please send them to my e-mail; Thanks in advance!
E-mail: [email protected]

From your crash report > OS Version: Mac OS X 10.7.2 (11C74) < outdated version of Lion
Install this combo update > OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac, then try Safari.

Data of the Report Painter report

Dear ALL,
I have the Report Painter report. When I'm executing this report I can save the data into the extract.
Could you tell me where are these data in the system(table?)? I want use these data for SAP script form.
Best regards,
Igor

Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
Please go through the enclosed document. This will give you step-by-step approach for Report painter:
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/da/6ada3889432f48e10000000a114084/frameset.htm
Check Report Painter Step-by-Step example under Tools->Report Painter / Report Writer->Report Painter->Creating a Report Painter Report.
Just go through These Links to learn about report Painter.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
I think it will give you some hint. I wish I could have authorization to use report painter on my this project so I can help you out practically.
Please see these steps , it`ll help you ...
http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp
regards
vinod

What happens to shared folders/mail when I disable/remove a mailbox in Exch2010 and which is better to get space back?

We have a number of old mailboxes taking up room. The users are long gone and I looked into removing them. The clients of these users have been moved to others. The users had shared folders that held this info. I have a few questions
about the removal.
1. Is there a difference in time before space is given back if I disable versus remove the user in EMC?
2. If an ex-employee had folders that others are sharing, what happens when I do the remove/disable? Will the folders still be out there on the people who had it shared or will it vanish from them too?
Thanks for your help.

"Best practice" is going to be defined by each company. I worked for Microsoft for 13.5 years, assisting over 100 large companies deploy either Windows or Exchange, and none had the same definition for their "best practice".
If you need access to a mailbox for a time period, you figure out a way to keep it. If you want any terminated employee's mailbox gone tomorrow, it is gone tomorrow.
I am a fan of having some sort of process that runs periodically to clear out unnecessary mailboxes and accounts, but if there are business reasons for keeping them around, that needs to be defined into the process. In my current company, terminated
accounts are kept for 30 days, mailbox included. We give mailbox access to a different employee if required and tell them that if they need anything, they need to pull it into their own mailbox. Then, when the account disappears, the mailbox goes
into the dumpster. So, if someone forgot to pull a message, they tell their boss and live with the consequences.
But again, that's just another example of how it might be handled. You get to define what will work for you, including pulling your business units in to help with the definition.

Help in a practice

Similar Messages

Maybe you are looking for