Help in creating a Query

Hi,
I have 2 ODS, one holding the PO data and other with GR data.
Now I want to create a report where where I can show pick up specfic field from each of the ODS and show.
For example I want to Open order summary report.
Here my selection is on PO Creation date.
In the report I need to show these fields.
PO Creation date - from PO ODS
PO Num - from PO ODS
PO line num - from PO ODS
PO item text - from PO ODS
PO Qty - from PO ODS
GR Qty - from GR ODS.
For this I have used replacement path for Variables PO Num and PO line Num.
I am able to get the result required, But the PO qty and GR qty are showed in different line rather than Combined into one line.
When I move the PO creation date into free charector then it is showing combine information of PO & GR qty in one line.
Can any one provide me the best data model which I should go.
Note : Presently we are using Infoset but we want to get ride of it.
Regards,
Tony

Hi Doniv,
we have tried it, but the problem when we use multiprovider or infocube is when we select the data based on fields which are not common on the boths sides it will not pick up the data correctly. For example PO creation date is on PO ODS. So when you create a query on the multiprovider with PO creation date as in selection. Then it will pick on PO data as PO creation date is not in GR ODS.
anyother ways...
Regards,
Tony

Similar Messages

I need some help on creating a query

This is my first crack at writing query's.
I am trying to create a query for a list on clients with a file name on the system. I found a lot of samples on the web, however i keep getting errors on all of them.
Here is on sample:
select SMS_G_System_COMPUTER_SYSTEM.Name,
SMS_G_System_SoftwareFile.FilePath, SMS_G_System_SoftwareFile.CreationDate,
SMS_G_System_SoftwareFile.FileDescription, V_R_System.ResourceType,
V_R_System.ResourceId from V_R_System inner join SMS_G_System_COMPUTER_SYSTEM on
SMS_G_System_COMPUTER_SYSTEM.ResourceID = V_R_System.ResourceId inner join SMS_G_System_SoftwareFile on
SMS_G_System_SoftwareFile.ResourceID = V_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName = "test1234.exe"
First i was getting an error:
Invalid object name 'SMS_R_System' and i had to change to V_R_System instead of SMS_R_System. "Is it because
SQL and WQL difference?????"
Now i am getting Invalid object name 'SMS_G_System_COMPUTER_SYSTEM' "Here is where i am stuck"
If possible i would like to explanation as well "maybe some good links", please keep in mind just getting started with query's.
Thanks for the help.
I am writing/testing query in sql management studio.
If there is a better way or a tool please let me know.

The application i am looking for does not show up in ADD/REM.
I was asking what is the difference between V_R_System instead of SMS_R_System?
And what should i use instead of SMS_G_System_COMPUTER_SYSTEM?
Maybe you can share some links so i can read a little more?
Thank you.

Hello: Help in creating a query

Hello All,
   I have to join two tables, LIPS AND VBAP on the fields
   lips-pspnr = vbap-ps_psp_pnr.
The problem i'm facing is: The table stores the value in converted form, the function is CONVERSION_EXIT_KONPD_OUTPUT.
Kindly guide me.
For the reference i'm posting my code.
select single pspnr into ppspnr from lips where vbeln = wa_hd_gen-deliv_numb.
CALL FUNCTION 'CONVERSION_EXIT_KONPD_OUTPUT'
   EXPORTING
     INPUT         = ppspnr
IMPORTING
    OUTPUT        = ppspnro
PSELT         =
CONCATENATE '''' PPSPNRO '''' INTO PPSPNRO .
CONCATENATE 'vbap~ps_psp_pnr = ' ppspnro   INTO clause SEPARATED BY SPACE.
APPEND clause TO where_clause.
   select single vbap~vbeln into s_vbeln from vbap WHERE (where_clause).
select single vbapvbeln into s_vbeln from vbap WHERE vbapps_psp_pnr = ppspnro.
Thanks.

hi Ushma..
use the following Function module
CONVERSION_EXIT_ABPRJ_INPUT
Converts External Project Number to Internal Project Number
CONVERSION_EXIT_ABPRJ_OUTPUT
Converts Internal Project Number to External Project Number
CONVERSION_EXIT_ABPSN_INPUT
Format > Without Edition (Project Number / WBS Element umber)
CONVERSION_EXIT_ABPSN_OUTPUT
Format > With Edition (Project Number / WBS Element Number)
CONVERSION_EXIT_ABPSP_INPUT
Conversion External > Internal WBS Element Number
CONVERSION_EXIT_ABPSP_OUTPUT
Conversion Internal > External WBS Element Number
Regards
Deva

QUERY HELP!!! trying to create a query

i'm creating a summary report
i have a table with sale dates
for example i have a table tab_1 and column saleDate as
saleDat
1923
1936
1945
2003
2005
saleDate contains years and there are some missing years where no sale
was made
My report has to display years starting from earliest year
so i have to create a query that starts with 1923
but the problem is that I have to have years that are not in table.
for example i have to display years 1924 which is not in table
so the part of report has to look like
1923 blah blah summary.........
1924 "
1925
1926
2005
2006
upto current year (2006 may not be in the table, but i have to display)
i just need to know the query that can query all the years starting from
the ealiest saleDate to current year
thanks in advance

Please write the query in the following form:
SELECT a.year, --- place other columns from your table.
FROM (SELECT (:start_num + rownum) year
FROM all_tab_columns
WHERE :start_num + rownum <= :end_num) a,
tab_1 b
WHERE a.year = b.saleDat(+);
Note:
1) if your start year and end year are 1923 and 2006. Then input as below:
:start_num = 1922
:end_num = 2006
2) Since for some of the years (1924 etc) may not be there in your so you may need to use NVL to print proper indicators.
3) If you have more than one record in tab_1 for a particular year then group them based year and then use it.
Hope this helps.
- Saumen.

Help: How to create a query like this?

I am working on a report and I am facing on a question like this:
TABLE TEST has two columns A and B
A B
2 INFO21
2 INFO22
3 INFO31
3 INFO32
3 INFO33
I'd like to create a query which will return
A INFO
2 INFO21, INFO22
3 INFO31, INFO32, INFO33
Please help.
Thank you in advance
Jimmy

A lot of pretty fine examples here:
http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php
Rgds.

Help need to create a query

I need to fetch records from a table. Please help me to create a query
The Tablename is Employee. It has the following records
Department Empname Gender
Finance Tom Male
Finance Rick Male
Finance Stacy Female
Corporate Tom Male
Corporate Rob Male
I want to select the value of the Gender field from the Employee table corresponding to a Department
If all the values in the Gender field are 'MALE' corresponding to 'finance' in the Department field, the value should be 'MALE'
If there is a value 'FEMALE', the gender corresponding to the Empname 'TOM' should be considered as the gender

Tables have rows - not records.
Your question is a basic SQL language question - which means you do not know the SQL language. This forum is not a classroom for teaching you the SQL language.
Use the following as the basic outline of how your SQL language statement need to look like for selecting the required from the table:
SELECT
<<sql projection goes here>>
FROM <<table name goes here>>
WHERE <<filter conditions go here>>
{code}
The SQL projection specifies the list of columns the SQL need to return to the caller.
The filter condition is basic predicates and AND and OR can be used for multiple predicates.
Go to http://tahiti.oracle.com and look for the +SQL Reference Guide+ for the Oracle version you are using. The +SELECT+ statement syntax is covered in detail and sample statements are provided.
And please do not expect this forum to be used as a classroom, or expect this forum to do your homework for a class.

Help: How to create a query that transpose the column content?

Here, suppose that I have two tables
TAB_A:
ID     TYPE
1     AA
1     AB
1     AC
2     BA
2     BB
2     BC
2     BD
I'd like to create a query that gives result as:
ID     TYPE
1     AA AB AC
2     BA BB BC BD Any suggestions?
Thank you in advance.
Jimmy

Hi
Try this:
SELECT id,
replace(LTRIM(MAX(SYS_CONNECT_BY_PATH(type,'*'))
KEEP (DENSE_RANK LAST ORDER BY curr),'*'),'*', ', ') AS type
FROM (SELECT id, type,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY type) AS curr,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY type) -1 AS prev
FROM tab_a)
GROUP BY id
CONNECT BY prev = PRIOR curr AND id = PRIOR id
START WITH curr = 1;
Ott Karesz
http://www.trendo-kft.hu

Need help in creating query!

Hi!
can anybody help me in generating query from emp table
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
7566 JONES MANAGER 7839 02-APR-81 2975 20
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 10
7788 SCOTT ANALYST 7566 19-APR-87 3000 20
7839 KING PRESIDENT 17-NOV-81 5000 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
7876 ADAMS CLERK 7788 23-MAY-87 1100 20
7900 JAMES CLERK 7698 03-DEC-81 950 30
7902 FORD ANALYST 7566 03-DEC-81 3000 20
output should be
JOB ENAME
ANALYST SCOTT
......................................FORD
CLERK ADAMS
.......................................MILLER
.......................................JAMES
MANAGER JONES
..................................... BLAKE
......................................CLARK
PRESIDENT KING
SALESMAN WARD
.....................................TURNER
Edited by: user9198143 on Nov 13, 2010 8:15 PM
Edited by: user9198143 on Nov 13, 2010 8:17 PM
Edited by: user9198143 on Nov 13, 2010 8:19 PM

SQL> break on job
1 select job, ename from emp
2* order by job
SQL> /
JOB       ENAME
ANALYST   SCOTT
       FORD
CLERK       MILLER
       JAMES
       ADAMS
MANAGER   CLARK
       JONES
       RAHIM
       BLAKE
PRESIDENT KING
SALESMAN JABBAR
JOB       ENAME
SALESMAN RAFIQ
       KARIN
       SALAM
       TURNER
       MARTIN
       ALLEN
       WARD
18 rows selected.Edited by: sb92075 on Nov 13, 2010 6:51 AM

Need to create report query to get latest open and last closed period for given application

Hi All,
I need to create a report query to get below result displayed in report output.
1)   -   Application name
2)   -    Ledger name
-o/ -Operating Unit
3)   - Last Closed Period
4)   - Current Open Period
5)   - Date Closed – Last Closed Period
6)   - Date Open – Current Open Period
I tr I tried to create the query below is the same. Please let me know if it looks fine.
SELECT *
FROM (SELECT fav.application_name ,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status ='C'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1
UNION ALL
SELECT *
FROM (SELECT fav.application_name Application_Name,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status = 'O'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc)
         WHERE ROWNUM = 1

It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM

How to create a query view in sap bw?

can any one please tell me how to create a query view in sap bw 3.5?

Hi,
you can do this by using Bex analyzer and WAD ..
gop through this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/0e/1339427f82b26be10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0d/af12403dbedd5fe10000000a155106/frameset.htm
hope this helps you ..
Reagrds,
shikha

Error while creating a query for my custom infotype

Hi,
I have created a custom infotype with fields currency amount and currency field .
While I am creating a query for it its giving an error
Message no. AQ_AD_HOC221 Error when generating the report(see long text )
I tried to execute the standard program RPUMS40CCI but still I am facing same error .
I have also maintained table T777i for my infotype but still problem exists.
Please help.
P

Hi
Check in PM01

Need help in creating a chart from 3 datasets

Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.

Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

Error running a query and creating a query report.

Hi all
I have a problem with a query when I'm running it or trying to create a report for it.
23/09/2009 11:47:31: 1). [Microsoft][SQL Native Client][SQL Server]Arithmetic overflow error converting expression to data type datetime.
'Document' (RDOC) -- Run query
23/09/2009 11:01:58: 1). [Microsoft][SQL Native Client][SQL Server]Invalid object name 'CSHS.T0'.
2). [Microsoft][SQL Native Client][SQL Server]Statement 'Received Alerts' (OAIB) (s) could not be prepared. - create a query report
This happened on a Windows Server 2003 OS , when I ran the same query on local pc on xp it ran fine on both scenarios.
Please help
Bongani Dlamini

select SlpName, ItmsGrpNam, sum(LineTotal) as 'Total Sales Minus Returns'
from
SELECT T4.SlpName, T3.ItmsGrpNam, T0.LineTotal FROM dbo.INV1 T0 INNER JOIN dbo.OINV T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod INNER JOIN OSLP T4 ON T0.SlpCode = T4.SlpCode WHERE T1.DocDate >=[%0] and T1.DoCdate<=[%1]
UNION
SELECT T4.SlpName, T3.ItmsGrpNam, (T0.LineTotal * -1) AS 'LineTotal'
FROM dbo.RIN1 T0 INNER JOIN dbo.ORIN T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T0.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod INNER JOIN OSLP T4 ON T0.SlpCode = T4.SlpCode WHERE T1.DocDate >=[%0] and T1.DoCdate<=[%1 ]
) InvoicesMinusReturnsDerivedTable
group by slpname, ItmsGrpNam

Error shown after creating a query in BI analyzer

"A critical program error occurred. The program has to close. Please refer to the trace for further information."
This error is shown while i try to execute the query after i have created a query using the BI contents that i activated. However, i am not sure if there is an error while creating the query or not. I just started learning BI analyzer and SAP logon. Any help will be useful =)

Hi Low Soon Wee,
Plz refer to the below threads which may solve ur issue:
Critical Error when launch Analyzer
Problem in Starting Business Analyzer (NetWeaver 2004s) in Excel
Hope this helps u...
Regards,
KK.

Help in creating a Query

Similar Messages

Maybe you are looking for