I need some help on creating a query

This is my first crack at writing query's.
I am trying to create a query for a list on clients with a file name on the system. I found a lot of samples on the web, however i keep getting errors on all of them.
Here is on sample:
select SMS_G_System_COMPUTER_SYSTEM.Name,
SMS_G_System_SoftwareFile.FilePath, SMS_G_System_SoftwareFile.CreationDate,
SMS_G_System_SoftwareFile.FileDescription, V_R_System.ResourceType,
V_R_System.ResourceId from V_R_System inner join SMS_G_System_COMPUTER_SYSTEM on
SMS_G_System_COMPUTER_SYSTEM.ResourceID = V_R_System.ResourceId inner join SMS_G_System_SoftwareFile on
SMS_G_System_SoftwareFile.ResourceID = V_R_System.ResourceId where SMS_G_System_SoftwareFile.FileName = "test1234.exe"
First i was getting an error:
Invalid object name 'SMS_R_System' and i had to change to V_R_System instead of SMS_R_System. "Is it because
SQL and WQL difference?????"
Now i am getting Invalid object name 'SMS_G_System_COMPUTER_SYSTEM' "Here is where i am stuck"
If possible i would like to explanation as well "maybe some good links", please keep in mind just getting started with query's.
Thanks for the help.
I am writing/testing query in sql management studio.
If there is a better way or a tool please let me know.

The application i am looking for does not show up in ADD/REM.
I was asking what is the difference between V_R_System instead of SMS_R_System?
And what should i use instead of SMS_G_System_COMPUTER_SYSTEM?
Maybe you can share some links so i can read a little more?
Thank you.

Similar Messages

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

I need some help , for create some paper on air

Hi everyone
I need some help , i work in a static sequence from Tehran street (1 frame), i paint damages on this frame in Photoshop because i need war atmosphere, then i add some smoke and cloud with particular .
but i think this sequence is not realistic yet
now i want add some moving paper in air and on street
do u have any solution for how can i make this paper and moving those
Thanks a lot
and pardon me for bad English
Ali Molavi

The best tool to add this kind of particle is After Effects.
If you have the Creative Cloud then I recommend you download that.
Slightly annoying voice over, but here is a youtube tutorial you can follow top make floating particals. You can adjust it to make it look exactly as you want.
http://www.youtube.com/watch?v=dq2op6yqvFk&noredirect=1

Need some help in creating client proxy to call webservice

Hi experts,
I am new to ABAP so couldnt understand the SAP ABAP jargons.
On of my colleague has written one search help exit function and i need to use that and have to write client proxy to establish connection to webservice.
I never worked on proxy or webservice so, struggling to understand the concept and steps.
I am following second part i.e Release 640 part of /people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap weblog.
I couldnt find "To get the process started, we turn to our old friend SE80. <b>From the Enterprise Services Tab, we are going to select Client Proxy and then hit create"</b>
when i go to transaction se80 ObjectNavigator, i could see two dropdown lists after some tabs.
in first list, I have selected, "Application Hierarchy", and in second I am selecting "Package".
Not sure whether its correct or not.
Once i do this i could see long list of <b>Object name and its description.</b>
Now, what should i do ? where should i go for "Enterprise Services Tab" to create my proxy.
Any help would be appreciated.
Please send me PDF, having detailed steps to create client proxy.
Thanks,
Pranav

Right click on the package and select Proxy object. In the Wizard select Service Consumer.
then give the url of the WSDL file you want to access or path if u have a local file.
then give the package for client proxy.
then complete the wizard. the client proxy will be create in that package.
Next step will be creating a Logical Port using the transaction "lpconfig". Give the proxy name of the service interface created under client proxy. and set the configuration as follows.
1. Make as a default port.
2. in the URL, give the url of the webservice (.asmx)
3. select "State Enabled" and "Message ID"
and after creating a logical port, set the proxy settings as in your webbrowser.
(Http proxy server and port).
then simply execute your webservice from SE80.

I need some help to create more space on my hard drive-what can I delete? I have my external G-DRIVE connected as a back up, so i think I'm duplicating a lot of back up files, mostly photos through Lightroom on my Mac HD. Only 9GB left out of 297GB...

Have never had to retrieve backed up files so I think I'm just chicken to delete files on my Mac. Is everything on my back up if I need it? Even photos that have been processed in Lightroom? Could I delete all older photo folders from my Mac and still get them from external drive if I needed them down the road? I have run a GrandPerspective scan and it appears most of my disk space is used for photo files and back-ups...probably have 30,000-40,000 photos. Thanks!

Look at getting Onyx, as you have alot of photo's, and so do I. Onyx will help clear somethings from you Mac, all you have to do is run Automation, and or Cleaning. Is that 30,000-40,000 Photo's Duplicates? if so, you might want to delete as many as the those duplicates as possible. i see you use Lightroom, are you useing that to import your images or are you useing something else like Iphoto, or just importing them to your mac. if you are using something else to import your photo's and then reimporting them, this might create duplicates of images. also sometimes when you delete images you dont want, they might not be acctually deleted. so clear you Trash, and run onyx to help clear these things up.
I know there are a few different programs out there that will help clrear out duplicates of items, and help you reduce space.
Duplicate-Annihilator Looks for images in Iphoto that are the same, and allows you to change them or delete them.
http://www.macupdate.com/app/mac/18748/duplicate-annihilator
TidyUp ($$) Will look for Music, Pictures Documents, or any duplicates.
http://www.hyperbolicsoftware.com/TidyUp.html
Hope This Helps you.

Need some help in EXECUTE IMMEDIATE Query

Hi All,
First of all i have a question. Is EXECUTE IMMEDIATE allowed for multi-row queries. (I am using Oracle 10g R2).
Some of my colleagues are using pipeline operator. Please refer below
BEGIN
EXECUTE IMMEDIATE 'CREATE TABLE TEMP NOLOGGING AS'||
'(' ||
'SELECT P.PSEQ,' ||
'I.PLEY,' ||
'I.ORG,' ||
'I.RKEY,' ||
'COUNT(P.PSEQ) COUNT'||
'FROM' ||
'PROD P,' ||
'INV I,' ||
'PLAC PL,' ||
'ORG O' ||
'WHERE' ||
'I.RKEY=P.PSEQ' ||
'AND'||
'P.COMP=''RT''' ||
'AND'||
'I.INVST = ''IN''' ||
'AND'||
'P.SSN=''C''' ||
'AND'||
'PL.PLEY=I.PLEY' ||
'AND'||
'I.ORG=O.OSEQ' ||
'GROUP BY' ||
'I.PLKEY,' ||
'I.ORG,' ||
'I.PLEY,' ||
'P.PSEQ' ||
END;
Is it at neccessary to concatenate. Earlied i have used execute immediate with multi row queries successfully without any ||.
Please help me to understand??
Thanks in advance.
Message was edited by:
SID

btw it's the concatenation operator, and '|' is known as the pipe character. Pipelines are something different.

Need Some Help in creating chart description is long thanks for ur time.

Hi, I was asked to create a chart for an existing report which is Average number of days open versus Profit Center.
I need to calculate Average number of days open as a sum of {command.Days_Opened}/Record Count.
Record Count = number of records with days open <> 0 in a group
I created a running total name Evalution and put it in details with formulae
whileprintingrecords;
Numbervar i;
if (command.days_open) <> 0 then
i := i+1;
else
i
In group headder i put @reset with the following syntax: whileprintingrecords; Numbervar i := 0;
in Group footer again Display with formulae whileprintingrecords; Numbervar i;
so i finally got avg. number of days open as Sum of {command.Days_Open}/@dispaly
tested the formule and is working well.
But the problem is this formulae doesnt work in chart. How can i resolve this problem

Sandeep,
Your question was posted in the "General" forum, however, it appears that you have a specific question centering around an application. I would suggest that you close this entry and re-post your question in the applicable forum (for example, Crystal or Web Intelligence, etc, etc).
Thanks,
John

I need some help to create service product in crm 2007

Hello everybody
I 'm new to crm 2007.
Now I met a problem.
Can somebody give me some advice. Thanks.
I want to write a programm to create service product.
But I don't know function modul which I can use.

Hi ,Garcia
Thanks for your reply.
I have tried that method,but met a error in sap function modul.
My crm's version is 2007.
Is there any othor method or fm?

Hi friends need some help while creating background job

I need to run a batch report in background in SM36 when any cancellation of sales order is done in VL09.
i.e when a cancellation of sales order is done i have to run a batch report which will call an IDOC outbound generation function module that will create the IDOC.....
Please tell me how to do this.....

Hi,
To submit backgroud jobs.
Call Function 'Job_Open'.
SUBMIT <report name>
WITH <input variants>
USER sy-uname
VIA JOB <job name>
AND RETURN.
If sysubrc eq 0.
Call Function 'Job_Close'.
Reward if helpfull.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.

Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium

We have a set of oracle clients running on T5220 zones that need some help

Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PM

Hello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

Need some help understanding the way materialized views are applied through

Hi, I need some help understanding the way materialized views are applied through adpatch.
In patch 1, we have a mv with build mode immediate. When applying it PTS hang due to pool performance of mv refresh.
So we provide patch 2, with that mv build mode deferred, hoping it'll go through. But patch 2 hang too on the same mv.
How does this work? Is that because mv already exists in the database with build immediate, patch 2 will force it to refresh first before changing build mode? How to get over this?
Thanks,
Wei

Hi Hussein,
Thank you for the response.
Application release is 11.5.10.
Patch 1 is MSC11510: 8639586 ASCP ENGINE RUP#38 PATCH FOR 11.5.10 BRANCH
Patch 2 is MSC11510: 9001833 APCC MSC_PHUB_CUSTOMERS_MV WORKER IS STUCK ON "DB FILE SEQUENTIAL READ" 12 HOURS
The MV is APPS.MSC_PHUB_CUSTOMERS_MV
This happens at customer environment but not reproducable in our internal environment, as our testing data is much smaller.
Taking closer look in the logs, I saw actually when applying both patch 1 and patch 2, MV doesn't exist in the database. So seems my previous assumption is wrong. Still, strange that patch 2 contains only one file which is the MV.xdf, it took 7 hours and finally got killed.
-- patch 1 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD IMMEDIATE
USING INDEX
REFRESH FORCE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from
dual
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 10:01:46
Manager says to quit.
-- patch 2 log
Materialized View Name is MSC_PHUB_CUSTOMERS_MV
Materialized View does not exist in the target database
Executing create Statement
Create Statement is
CREATE MATERIALIZED VIEW "APPS"."MSC_PHUB_CUSTOMERS_MV"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 10 MAXTRANS 255 LOGGING
STORAGE(INITIAL 4096 NEXT 131072 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 4 FREELIST GROUPS 4 BUFFER_POOL DEFAULT)
TABLESPACE "APPS_TS_SUMMARY"
BUILD DEFERRED
USING INDEX
REFRESH COMPLETE ON DEMAND
WITH ROWID USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS select distinct
from dual
Start time for statement above is Tue Feb 02 10:05:06 GMT 2010
Exception occured ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
java.sql.SQLException: ORA-00028: your session has been killed
ORA-00028: your session has been killed
ORA-06512: at "APPS.AD_MV", line 116
ORA-06512: at "APPS.AD_MV", line 258
ORA-06512: at line 1
Exception occured :No more data to read from socket
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Feb 02 2010 19:51:27
Start time for statement above is Tue Feb 02 12:44:52 GMT 2010
End time for statement above is Tue Feb 02 19:51:29 GMT 2010
Thanks,
Wei

TS1702 I need some help the apps were downloading slowly

The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.

Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.

Need some help in debugging this exported script

Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;

Pl do not post duplicates - Need some help in debugging this script

I need some help on creating a query

Similar Messages

Maybe you are looking for