Help in starting 9iDS after installing it in RH8.0
Hi everyone,
(comment ---> I really need this to work. It's the first time I write in this forum, I'll appriciate your kindness.)
I've just installed the 9iDS in RH8.0, there where some errors during the installation process; however, close it and when resuming the installation just finished perfectly!.
I need to work with Forms and Report Designer, but I don't know how to start the applications for getting them to work. I'll appriciate enormously if someone could helpme with that.
I've read a lot, but I still can't find the way of executing these apps. I remember the famous Windows way: Start > Programs > Oracle ...Click; but how can I do it in RH8.0 with the Shell(I guess, cause there weren't any shortcut created during the installation process).
Thanks a lot.
Regards,
Alvaro Sandi
Lucky you, i've not gone throught the complete install under UnitedLinux...but i know how to start the thing : Have a look under you $ORACLE_HOME and search for a file name forms90.sh or something like that, it is a template of all environnement variables that you have to set for forms to run. The most important one is your DISPLAY. After setting all that stuff you just type the name of the forms executable file (look under $ORACLE_HOME/bin...it should be like f90desm)...sorry for not being precise, its because i'm windozing right now ;)
Similar Messages
-
Error In Starting Jboss after installing OIM server
Hi All,
I have Installed OIM_Server(OIM 9.1.0.1) ON Jboss server(4.2.3) , I have 1 GB RAM m/c so have JVM setting as -XMS512m -XMX768 m. While installation of OIM Server, it showed the success message. But When I am starting the server , to perform post installation check, it is showing following error message .
Does anybody have any ideas what the problem is? Please provide the possible solution.
Thanks to All :)
Error :
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Unable to retrieve orbjavax.management.InstanceNotFoundException: jboss:service=CorbaORB is not registered.
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linked java:comp/UserTransaction to JNDI name: UserTransaction
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] addEnvEntries
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceEnvRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkMessageDestinationRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbLocalRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkServiceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkSecurityDomain
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] No security-domain given, using default: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linking security/securityMgr to JNDI name: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] AbstractWebContainer.parseWebAppDescriptors, End
2009-07-16 18:43:27,401 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Using session cookies default setting
2009-07-16 18:44:02,667 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750044964, maxLifeAfterPassivation=1200000
2009-07-16 18:45:11,465 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSchedulerThread"
2009-07-16 18:45:11,465 ERROR [STDERR] java.lang.NoClassDefFoundError: org/quartz/core/JobRunShell
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.impl.StdJobRunShellFactory.borrowJobRunShell(StdJobRunShellFactory.java:86)
2009-07-16 18:45:11,465 ERROR [STDERR] at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:352)
2009-07-16 18:45:11,465 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: Unexpected error during load of: org.quartz.core.JobRunShell, msg=PermGen space
2009-07-16 18:45:11,465 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:560)
2009-07-16 18:45:11,481 ERROR [STDERR] at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-07-16 18:45:11,481 ERROR [STDERR] at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-07-16 18:45:11,481 ERROR [STDERR] ... 2 more
2009-07-16 18:45:11,481 ERROR [STDERR] Caused by: java.lang.OutOfMemoryError: PermGen space
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750126168, maxLifeAfterPassivation=1200000
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750133247, maxLifeAfterPassivation=1200000
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, doneI am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15" -
No start-up after installing 10.2
Hello All:
I cannot get my iMac to start up after installing OS 10.2
This - one of the last iMac CRT's - is my old computer which I have erased so I may give it to my niece for Christmas. The machine was running OS 10.2; it has 256MB, a 40 gig HD; it is a graphite slot-loader with a 600mhz processor (I believe).
Once I erased it, I began loading new software: it would take up to 10.0.4 and run, but once I installed 10.2 (from a disk I bought from Apple - white background, blue X) I would get a message to reboot in many languages after the gray screen. A few times I got code during start-up and the machine would freeze.
I ran the firmware updater and installed OS 9.2 thinking that would help. I reset PRAM. I reinstalled 10.0 from different disks I had - the ones which ship with the computer. I ran software updater. Nothing works.
The only thing I thought of doing was getting a copy of OS 10.1 to install after 10.0, but before 10.2. Does this make a diffrence? Can I just jump to OS 10.2? Why didn't the machine ask for the second disk when installing 10.2? Did I do something wrong when I erased the disk? What do I do next?
Thanks in advance for your help,
Rob
iMac Mac OS X (10.4.3)Hi Rob, and welcome to the discussions.
The multi-lingual message to restart is called a kernel panic. This can be caused by software (third-party extensions or drivers) or hardware.
You said the machine was running 10.2 before you erased it to configure for your neice. If so, then your firmware was already up-to-date. Did you change anything on the iMac? New hard drive, new RAM, non-apple keyboard or mouse?
Prior to installing 10.2, you installed 10.0.4 (this isn't necessary, by the way; as long as the firmware is up-to-date, you can erase the hard drive and go straight to 10.2). Did you install any other software? When you installed 10.2, did you did an archive and install, or an upgrade?
I'd suggest starting fresh:
Step 1: Unplug all peripherals (except keyboard and mouse) and boot from your 10.2 install disk, then launch Disk Utility from the Install menu at the top of the screen;
Step 2: Erase the hard drive, and install the OS9 drivers (look for a check-box in the erase window);
Step 3: Have Disk Utility repair the disk (if it fixes any errors, keep running it until it finds no errors);
Step 4: Quit Disk Utility, and continue with the Installer.
Good luck!
Andrew -
Errors starting JBoss after installing OIM
I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15" -
Help! Lightroom freezes after installing.
I get this message after trying to create or open a catalog: "An error occured when attemting to change modules." Then Lightroom freezes.
I work on a Mac and have formatted and reinstalled my systemdisk with a qlean install. I had Lightroom installed and have used it for some years. But when installing the programs again I went for the Creative Cloud solution. When I tried to open my previous catalog I got this error message. And after several deinstallings and reinstallings I still get the same message and Lightroom freezes.
Anyone who can help?Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Can't start Tomcat after installing Bea WorkShop for JSP
Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron -
Can't Start Portal After Install
After downloading and installing the of evaluation Portal 4.0 SP1, I get the following message upon startup when I enter the system password that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the same message.
What password should I use to start the server?I've followed the directions and am experiencing the exact same problem. Brand
new installation of Weblogic server 6.1 SP2 with examples. That install is working.
Then added Portal 4.0 SP1, updated the license file and I have the same issue
with the Illegal access exception resulting in the "Fatal initialization exception"....
Hmm!
[email protected] (Bowrat) wrote:
Below listed are the common errors you run into during installation
process:
- You need to have the correct version numbers of both the weblogic
server and the portal server. For instance the portal server 4.0 (eval
copy) will only run on WebLogic 6.1 SP1. So check the edocs for
supported platforms
- Make sure you have the installed the full version of the weblogic
server (including examples)
- Finally, you need to run the UpdateLicense.cmd file to update the
license.bea under ur Bea Root
Give it a shot after u have checked all of the above three - goodluck
- Bowrat
www.Bowstreet.com
Steve Anderson <[email protected]> wrote in message news:<[email protected]>...
From: Steve Anderson <[email protected]>
Newsgroups: weblogic.support.install
Subject: Can't Start Portal After Install
References:
NNTP-Posting-Host: 209.11.114.150
X-Original-NNTP-Posting-Host: 209.11.114.150
Message-ID: <[email protected]>
Date: 13 Feb 2002 20:25:53 -0800
X-Trace: 13 Feb 2002 20:25:53 -0800, 209.11.114.150
Organization: BEA SYSTEMS Inc
Lines: 18
XPident: firewall-user
Path: newsgroups.bea.com!209.11.114.150
Xref: newsgroups.bea.com weblogic.support.install:9600
After downloading and installing the of evaluation Portal 4.0 SP1,I get the following message upon startup when I enter the system password
that I entered during installation:
Starting WebLogic Server ....
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: try to access method weblogic/management/internal/
Helper.preloadMBeanInfos()V from class weblogic/management/Admin
at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
I even tried "weblogic" for the system password and I get the samemessage.
What password should I use to start the server? -
Logic pro not starting up after install.
Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?
I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control. -
when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.
Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.
-
Won't start up after installing iTunes update
After installing an iTunes update yesterday morning, I shut down my computer while I was gone all day. When I returned home and restarted it, I got the white Apple screen and gray wheel for an unusually long time, 30-45 seconds. Then the screen turned black and the following appeared:
Sept 13 09:33:05 com.apple.inbindd: Bad System Call
Sept 13 09:33:05 com.apple.inbindd: respawning too quickly! throttling
Sept 13 09:33:05 com.apple.inbindd: 9 more failures without leaving at least 60 seconds will cause job removal
Sept 13 09:33:05 com.apple.inbindd: will restart in 60 seconds
... some other prompts flashed up on the screen, too quickly to read what they said...this continues for at least 2 minutes before getting this message:
Sept 10 06:33:05 com.apple.inbindd: to many failures in succession
Sept 10 06:33:05 localhost:/ root#
And then nothing happens. I found a ProBook user on another board who got the same error after installing an iTunes update, and restarting in 'safe mode' seemed to help him. I tried to follow the same instructions but they must be different for the iMac--holding down the shift key while restarting made no difference.
iMac 17" Intel 1.83 GHz 512MB 160GB SD/AP/BT
Not being able to even get to the desktop--I am at a total loss. Please help!The Safe Mode startup key combo is the same; Startup key combinations for Intel-based Macs, it just isn't working for you.
I suggest starting from the Install DVD that came with your iMac. Once in the Installer you will find tools in the Utilties menu. Using the Disk Utility try repairing the startup volume. -
Powermac g4 shuts down during start up after installing Leopard and upgrade
I have a powermac g4 (agp), 1ghz, 120gig hd
I successfully installed Leopard. After install the updater came up so I updated the files. I think they were OSX update, quicktime, itunes, and a couple of others I can't recall. I was prompted to restart for updates and when I did it will get to the white screen with the grey apple and spinning wheel then it just shuts off. I have tried to start it up several times and it does the same thing each time. I can't start with the leopard disk since I can't get the dvd drive to open without it running. I've looked at other similar posts on this subject but don't see any that are similar to mine. Any help would be appreciated.Hi, Claire -
I can't start with the leopard disk since I can't get the dvd drive to open without it running.
Couple of ways to work around that -
• Restart or boot the machine, immediately press the mouse button, keep it held down. This is a hardware command to the Mac to eject all removable media, which should open the drive tray. Insert the disk and close the tray, restart and press the C key.
• Try restarting or booting the machine, then immediately press the Option key (ideally before or simultaneous with the startup chime), keep it held down. This should bring up Startup Manager (a vivid blue screen with a few large icons showing). Once Startup Manager has fully loaded, press Command-. (Command-PeriodKey). This should open the optical drive tray. Insert the Leopard disk and close the tray; wait a bit for the drive to spin up; then click the circular arrow icon on the left. This will cause the machine to rescan the available buses and find the Leopard disk. Once that has displayed, click it to select it and then click the straight arrow icon on the right. It should now boot to that disk.
Article #HT1310 - Startup Manager: How to Select a Startup Volume
powermac G4 (agp/sawtooth), 1ghz....
The fastest G4 (AGP), aka "Sawtooth", machine shipped was 500MHz. If your machine is 1GHz, then it has either had a processor upgrade, or it is a later model. It helps us to know which it actually is. These articles can help you identify it -
Article #58418 - Power Mac G4: How to Differentiate Between Models
Article #42739 - Power Mac G4: How to Differentiate Between Models (part 2)
The fact that it may have an AGP graphics card does not make it a G4 (AGP), or Sawtooth, model - all G4's after the G4 (PCI) model shipped with AGP graphics cards, including the Quicksilver and MDD models. -
Computer won't start up after installing iLife '09
My MacBook Pro is now stuck in a bricked mode after installing iLife '09.
Install:
1. The install went perfectly unlike some of the posts I have read.
2. The installer asked me to register and I chose "later".
3. The installer asked to restart to complete the process and I accepted.
4. Then it restarted my machine and the progress spinner just sits there for five minutes...then the computer just shuts off cold.
Fix Attempts:
1. Tried restarting manually many times, but it keeps shutting itself off after five minutes of spinning.
2. Tried zapping my P-Ram by restarting and holding down commandoption+pr a few times, but that didn't help.
3. Restarted while holding down option to boot Windows XP. Windows booted successfully and then I restarted back in Mac mode, but that didn't help.
4. I ejected the iLife '09 disc and unplugged the power chord and USB iPhone charger, just in case that has anything to do with the ghost in the machine, but that didn't help either.
I'm left trying to decide what to do. Going to the Genius bar does not appeal to me for various reasons.
Any one else out there experience this problem and get things running again??
~adam
Message was edited by: adam_glazierSince I don't have the original install discs that came with my computer, I tried these things:
1. Tried booting in Safe Mode by holding down the shift key at start up, but does not help.
2. Booted in Single-User Mode by holding down command+s at start up. Then I get the fsck diagnostic by typing in "/sbin/fsck -fy".
Did that three times and get the same response:
/dev/rdisk0s2
Root file system
Checking Journaled HFS Plus volume.
Checking Extents Overflow.
Checking Catalog file.
disk0s2: I/O error.
Invalid key length
(4, 25236)
Volume check failed.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
:/ root#
Then I ran the command "df -hl" to see what the drive space looks like. Looks good enough:
Filesystem root_device
Size 80Gi
Used 68Gi
Avail 12Gi
Capacity 86%
Mounted on /
Any ideas if this helps?? -
Starting Problems after installing Software Update SecUpd2009-001ppc.pkg
Hey Guys,
After installing the SecureUpdate from January 2009 today my iMac just seems to freeze at startup. Only thing appears is the grey apple and the loading animation.
*Already tried Disk Utility, fsck, and Safe Startup.*
+-Disk Utility doesn't find any problems+
+-fsck doesn't find any problems either+
+-Safe Startup just doesn't work+
What i found here in the discussion forum is the solution with the terminal. Only thing is that I won't get further till following point 6:
*(post from nleoncavallo )*
0. Use a second computer to download the update to a USB drive. (in theory, I imagine the update is somewhere on the hard drive, but I don't know where)
1. Boot from the original install CD (pressing the "C" key while the computer starts)
2. Get up to the point of the installation screen, then start Terminal
3. type "mount" to see a list of the volumes
4. type "find /Volumes/thenameoftheUSB/*.dmg" to get the full path of the update file (so you can copy it and paste it in step 5).
5. type "hdiutil attach /Volumes/thenameoftheUSBdrive/pathoftheupdate/SecUpd2008-008Intel.dmg" (now you have mounted the update file)
*6. type "/Volumes/Macintosh\ HD/usr/sbin/installer -pkg /Volumes/Security\ Update\ 2008-008/SecUpd2008-008Intel.pkg -target /Volumes/Macintosh\ HD"*
7. Exit Terminal and select "Startup Disk" and reboot.
I _already checked Typo_ and i am really going crazy about this. What terminal replys:
+"-bash: /Volumes/Macintosh HD/usr/sbin/installer: No such file or directory"+
Can somebody help me?Thank you for your fast reply!
Maybe I should have made it clearer. This problem I've got adheres with the software update I've installed. I tried the solutions out you send me with your link but they didn't help me out. Thing is, that i forgot to say:
After a while the grey screen disappears and instead a blue screen comes to vision. But thats it. Then nothing happens anymore.
So far, the terminal thing gives me the most trustful feeling in this. So I still need help! -
Can not start x after installing nvidia 173.14.x drivers [SOLVED]
After installing nvidia-beta (version 173.14.05-5) I am unable to start x. I receive the errors:
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
I have tried the installer directly from nVidia itself and I receive the same results. Any help is appreciated. Thanks.
Last edited by vytalelementz (2008-08-26 16:11:11)nvidia-utils-beta was installed, also my GPU is listed as supported on nvidia's site.
Here's the whole xorg log file just in case:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ve1.vytalworld.org 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
Build Date: 22 May 2008 06:09:07PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 2 13:29:09 2008
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e0900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 147b,1c12 rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 147b,1c12 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 147b,1c12 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 147b,1c12 rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 147b,1c12 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 147b,1c12 rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card f47b,1c12 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 147b,1c12 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0291 card 3842,c564 rev a1 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 147b,1c12 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX[b]
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX[b]
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX[b]
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24, I/O @ 0xac00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.05 Mon May 19 00:30:52 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:10:20 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[32] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[33] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[34] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[35] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[37] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found -
Cannot Start Sqlplus after installing Oracle on linux
Hi All,
I tried installing oracle10g-10.1.0 on Fedora core 2.My installation was successful.But i'm not able to start sqlplus after my installation.I have made the necessary changes in the .bash_profile.Please do find the contents of the file and let me know what i need to do further for me to start both my sqlplus and isqlplus.when i go to the bin directory and execute sqlplus as oracle user i get the following error messages.
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
How can i solve this error.Your suggestions are greatly appreciated.The contents of my .bash_profile are as follows.Pls advice on the same.Thanks in advance.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
umask 022
PATH=$PATH:$HOME/bin
unset USERNAME
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.1.0/Db_1
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
#/u01/app/oracle/product/10.1.0/db_1/bin
#NLS_LANG=american_america.US7ASCII
#export NLS_LANG
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
#export ORA_NLS33
Thanks,
RamaHi Gasparotto,
Thanks for your time and for your suggestion in helping me out to find a solution to my problem.As per your request pls do find enclosed the contents of the command env in my /home/oracle directory.Pls advice me where i have done a mistake.Your inputs are greatly appreciated.Thanks once again.
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
QTDIR=/usr/lib/qt-3.3
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/10.1.0/Db_1/lib
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
KDEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/bin:/etc::/bin::/home/oracle/bin:/u01/app/oracle/product/10.1.0/Db_1/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
LOGNAME=oracle
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
G_BROKEN_FILENAMES=1
XAUTHORITY=/home/oracle/.xauthzZ1FKa
_=/bin/env
Thanks,
Rama
Maybe you are looking for
-
I have two iphone , 4 and 5s I have only one apple id I upgeraded 5s to ios 8 but cleared all contacts of iphone 4 and I have backup on icloud for 4 and 5s but I can't recovery contacts for iphone 4 After restore with backup on icloud , A moment se
-
XsltCollaboration code file path exceeds 255 characters
All, I'm trying to build a Deployment Profile for a CAPS project containing an XSLT Collaboration Definition. I managed to build the Deployment Profile previously with persistence turned off. After turning on persistence (Persistence for Reporting se
-
Adobe Premiere Elements 10 chapter limits
Has anything been done recently that allows you to use more than 25 chapters per project in Adobe Premiere Elements 10?
-
How do I download lastest version of iphoto to use with yosemite?
??
-
How do I get Eprint to work on my kindle fire
I just got a new kindle fire hd and can't seem to set up printing from it my printer is officejet 6500a all in one printer.