Help in understanding a PCR
Hi Experts
can any one help me in understanding what following PCR is doing?
ZERO=&TWPB VVVV Set zero
TABLEWPBP Read table fields
VARGBAPZNR Tab.field VVVVV v.ky
01
NUM=01 Set
ADDWT&TWPB VAR Variable table
Regards,
Jignya
Hi Jignya,
Here is what each line of PCR does.
ZERO=&TWPB --> Clears or initializes variable TWPB as blank
TABLEWPBP --> Reads table WPBP
VARGBAPZNR --> Reads field APZNR of table WPBP
** --> Read value under APZNR field of table WPBP. For any other WPBP split for APZNR do nothing
01 --> For 01 WPBP split for APZNR split do the following as under this node
NUM=01 --> Replace Number field and set it to 01 value
ADDWT&TWPB --> Pass value from Number, Amount and Rate to variable TWPB. Here only Number will be filled by 01 value rest fields like Amount and Rate should be blank.
In short, variable TWPB is set to have Number field as 01 whenever WPBP split as in APZNR field is 01 otherwise variable will have nothing.
Thanks,
Ameet
Similar Messages
-
Help on understanding and writing PCRs
dear members
though i have some knowledge on india payroll, i do not know anything on writing a PCR (Personnel Calculation Rule). could you be kind enough to guide me and help me understand and write a PCR.
shall be thankful for a prompt response.Check these -
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d51fb2575e11d189270000e8322f96/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4f/d51e68575e11d189270000e8322f96/frameset.htm
Regards,
Amit -
Error Posting IDOC: need help in understanding the following error
Hi ALL
Can you please, help me understand the following error encountered while the message was trying to post a IDOC.
where SAP_050 is the RFC destination created to post IDOCs
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_RUNTIME</SAP:Code>
<SAP:P1>FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with SAP_050 Operation successfully executed FM NLS_GET_LANGU_CP_TAB</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated.............Thank you!Hi Patrick,
Check the authorizations assigned to the user which you used in the RFC destinations, If there is no enough authorizations then it is not possible to post the idocs.
Also Refer this Note 747322
Regards,
Prakash -
E-Rows = NULL and A-Rows=42M? Need help in understanding why.
Hi,
Oracle Standard Edition 11.2.0.3.0 CPU Oct 2012 running on Windows 2008 R2 x64. I am using Oracle 10g syntax for WITH clause as the query will also run on Oracle 10gR2. I do not have a Oracle 10gR2 environment at hand to comment if this behaves the same.
Following query is beyond me. It takes around 2 minutes to return the "computed" result set of 66 rows.
SQL> WITH dat AS
2 (SELECT 723677 vid,
3 243668 fid,
4 TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
5 TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
6 FROM DUAL
7 UNION ALL
8 SELECT 721850,
9 243668,
10 TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
11 TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
12 FROM DUAL
13 UNION ALL
14 SELECT 723738,
15 243668,
16 TO_DATE ('16.03.2013', 'dd.mm.yyyy'),
17 TO_DATE (' 04.04.2013', 'dd.mm.yyyy')
18 FROM DUAL)
19 SELECT /*+ GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
20 FROM dat
21 CONNECT BY LEVEL <= maxdt - mindt + 1
22 order by fid, vid, dtshow;
66 rows selected.
SQL>
SQL> SELECT * FROM TABLE (DBMS_XPLAN.display_cursor (NULL, NULL, 'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 9c4vma4mds6zk, child number 0
WITH dat AS (SELECT 723677 vid, 243668 fid,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt FROM DUAL
UNION ALL SELECT 721850, 243668,
TO_DATE ('06.02.2013', 'dd.mm.yyyy'), TO_DATE ('
22.03.2013', 'dd.mm.yyyy') FROM DUAL UNION ALL
SELECT 723738, 243668, TO_DATE
('16.03.2013', 'dd.mm.yyyy'), TO_DATE (' 04.04.2013',
'dd.mm.yyyy') FROM DUAL) SELECT /*+
GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
FROM dat CONNECT BY LEVEL <= maxdt - mindt + 1 order by fid, vid,
dtshow
Plan hash value: 1865145249
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | OMem | 1Mem | Used-Mem |
| 0 | SELECT STATEMENT | | 1 | | 66 |00:01:54.64 | | | |
| 1 | SORT UNIQUE | | 1 | 3 | 66 |00:01:54.64 | 6144 | 6144 | 6144 (0)|
| 2 | CONNECT BY WITHOUT FILTERING (UNIQUE)| | 1 | | 42M|00:01:04.00 | | | |
| 3 | VIEW | | 1 | 3 | 3 |00:00:00.01 | | | |
| 4 | UNION-ALL | | 1 | | 3 |00:00:00.01 | | | |
| 5 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | | | |
| 6 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | | | |
| 7 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | | | |
--------------------------------------------------------------------------------------------------------------------------If I take out one of the UNION queries, the query returns in under 1 second.
SQL> WITH dat AS
2 (SELECT 723677 vid,
3 243668 fid,
4 TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
5 TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
6 FROM DUAL
7 UNION ALL
8 SELECT 721850,
9 243668,
10 TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
11 TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
12 FROM DUAL)
13 SELECT /*+ GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
14 FROM dat
15 CONNECT BY LEVEL <= maxdt - mindt + 1
16 order by fid, vid, dtshow;
46 rows selected.
SQL>
SQL> SELECT * FROM TABLE (DBMS_XPLAN.display_cursor (NULL, NULL, 'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID 1d2f62uy0521p, child number 0
WITH dat AS (SELECT 723677 vid, 243668 fid,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt FROM DUAL
UNION ALL SELECT 721850, 243668,
TO_DATE ('06.02.2013', 'dd.mm.yyyy'), TO_DATE ('
22.03.2013', 'dd.mm.yyyy') FROM DUAL) SELECT /*+
GATHER_PLAN_STATISTICS */ DISTINCT vid, fid, mindt - 1 + LEVEL dtshow
FROM dat CONNECT BY LEVEL <= maxdt - mindt + 1 order by fid, vid,
dtshow
Plan hash value: 2232696677
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | OMem | 1Mem | Used-Mem |
| 0 | SELECT STATEMENT | | 1 | | 46 |00:00:00.01 | | | |
| 1 | SORT UNIQUE | | 1 | 2 | 46 |00:00:00.01 | 4096 | 4096 | 4096 (0)|
| 2 | CONNECT BY WITHOUT FILTERING (UNIQUE)| | 1 | | 90 |00:00:00.01 | | | |
| 3 | VIEW | | 1 | 2 | 2 |00:00:00.01 | | | |
| 4 | UNION-ALL | | 1 | | 2 |00:00:00.01 | | | |
| 5 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | | | |
| 6 | FAST DUAL | | 1 | 1 | 1 |00:00:00.01 | | | |
26 rows selected.What I cannot understand is why the E-Rows is NULL for "CONNECT BY WITHOUT FILTERING (UNIQUE)" step and A-Rows shoots up to 42M for first case. The behaviour is the same for any number of UNION queries above two.
Can anyone please help me understand this and aid in tuning this accordingly? Also, I would be happy to know if there are better ways to generate the missing date range.
Regards,
SatishMay be, this?
WITH dat AS
(SELECT 723677 vid,
243668 fid,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') mindt,
TO_DATE ('06.03.2013', 'dd.mm.yyyy') maxdt
FROM DUAL
UNION ALL
SELECT 721850,
243668,
TO_DATE ('06.02.2013', 'dd.mm.yyyy'),
TO_DATE (' 22.03.2013', 'dd.mm.yyyy')
FROM DUAL
UNION ALL
SELECT 723738,
243668,
TO_DATE ('16.03.2013', 'dd.mm.yyyy'),
TO_DATE (' 04.04.2013', 'dd.mm.yyyy')
FROM DUAL)
SELECT vid, fid, mindt - 1 + LEVEL dtshow
FROM dat
CONNECT BY LEVEL <= maxdt - mindt + 1
and prior vid = vid
and prior fid = fid
and prior sys_guid() is not null
order by fid, vid, dtshow;
66 rows selected.
Elapsed: 00:00:00.03 -
Can you help me understand the use of the word POSITION in TR and CFM?
Hi,
I am trying to have a view of typical BI reports in TR and TM/CFM so through my research I came to the following link:.
http://help.sap.com/saphelp_nw2004s/helpdata/en/62/08193c38f98e1ce10000000a11405a/frameset.htm
My problem on this link and other postings on this site seem to be the same. Can you help me understand the use of the word POSITIONS in these context:
1. Our client has asked for financial transaction reports in BW, such as position of Borrowings, Investments and Hedge Operations (TM data).
2. I have a requirement on, some reports related to Money Market (Fixed Term Deposits, Deposits at Notice) something on FSCM-Treasury and Risk Manager. These reports will be similar to that of Loans, i.e. Position statement, flow statement, etc.
3. The set of position values for a single position or a limited amount of positions can be reported by transactions TPM12 and TPM13 in R3.
4. 0CFM_C10 (Financial Positions Cube)
Do you have some simple report outputs to help clarify how the word POSITION is used in such environments?
Thanks
Edited by: AmandaBaah on Feb 15, 2010 4:39 PMIf I future buy 10 shares in company at £1 per share - at the end of the day my potential value is £10
The next day the shares drop tp £0.9 per share - I have a negative position - my shares are only worth £9
I haven;t bought them yet - but I have a negative position - ie if things stayed as they are - I am going to realise (ie end up with) a loss
Now you can use this for loans and foreign exchange banks as well... -
Need help in understanding why so many gets and I/O
Hi there,
I have a sql file somewhat similar in structure to below:
delete from table emp;-- changed to Truncate table emp;
delete from table dept;--changed to Truncate table dept;
insert into emp values() select a,b,c from temp_emp,temp_dept where temp_emp.id=temp_dept.emp_id
update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);
commit --only at the end
the above file takes about 9-10 hrs to complete its operation. and
the values from v$sql for the statement
update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);
are as below:
SHARABLE_MEM PERSISTENT_MEM RUNTIME_MEM SORTS LOADED_VERSIONS OPEN_VERSIONS USERS_OPENING FETCHES EXECUTIONS PX_SERVERS_EXECUTIONS END_OF_FETCH_COUNT USERS_EXECUTING LOADS FIRST_LOAD_TIME INVALIDATIONS PARSE_CALLS DISK_READS DIRECT_WRITES BUFFER_GETS APPLICATION_WAIT_TIME CONCURRENCY_WAIT_TIME CLUSTER_WAIT_TIME USER_IO_WAIT_TIME PLSQL_EXEC_TIME JAVA_EXEC_TIME ROWS_PROCESSED COMMAND_TYPE OPTIMIZER_MODE OPTIMIZER_COST OPTIMIZER_ENV OPTIMIZER_ENV_HASH_VALUE PARSING_USER_ID PARSING_SCHEMA_ID PARSING_SCHEMA_NAME KEPT_VERSIONS ADDRESS TYPE_CHK_HEAP HASH_VALUE OLD_HASH_VALUE PLAN_HASH_VALUE CHILD_NUMBER SERVICE SERVICE_HASH MODULE MODULE_HASH ACTION ACTION_HASH SERIALIZABLE_ABORTS OUTLINE_CATEGORY CPU_TIME ELAPSED_TIME OUTLINE_SID CHILD_ADDRESS SQLTYPE REMOTE OBJECT_STATUS LITERAL_HASH_VALUE LAST_LOAD_TIME IS_OBSOLETE CHILD_LATCH SQL_PROFILE PROGRAM_ID PROGRAM_LINE# EXACT_MATCHING_SIGNATURE FORCE_MATCHING_SIGNATURE LAST_ACTIVE_TIME BIND_DATA TYPECHECK_MEM
18965 8760 7880 0 1 0 0 0 2 0 2 0 2 2011-05-10/21:16:44 1 2 163270378 0 164295929 0 509739 0 3215857850 0 0 20142 6 ALL_ROWS 656 E289FB89A4E49800CE001000AEF9E3E2CFFA331056414155519421105555551545555558591555449665851D5511058555155511152552455580588055A1454A8E0950402000002000000000010000100050000002002080007D000000000002C06566001010000080830F400000E032330000000001404A8E09504646262040262320030020003020A000A5A000 4279923421 50 50 APPS 0 00000003CBE5EF50 00 1866523305 816672812 1937724149 0 SYS$USERS 0 01@</my.sql -2038272289 -265190056 0 9468268067 10420092918 00000003E8593000 6 N VALID 0 2011-05-11/10:23:45 N 5 0 0 1.57848E+19 1.57848E+19 5/12/2011 4:39 0
1) how do i re-write this legacy script? and what should be done to improve performance?
2) Should i use PL/sql to re-write it?
3) Also help in understanding why a simple update statement is doing so many buffer gets and reading , Is this Read consistency Trap as i'm not committing anywhere in between or it is actually doing so much of work.
(assume dept table has cols emp_name and emp_id also)update emp set emp_name=(select emp_name from dept where emp.id=dept.emp_id);I guess that these are masked table names ? Nobody would have emp_name in a dept table.
Can you re-format the output, using "code" tags ( [ or { }
Hemant K Chitale
Edited by: Hemant K Chitale on May 12, 2011 12:44 PM -
Duplicate partitions, need help to understand and fix.
So I was looking for a USB that I plugged in and went into /media/usbhd-sdb4/miles and realized all its contents was from my home directory.
So I created a random file in my home directory to see if it would also update /media/usbhd-sdb4/miles , and it did.
Can someone help me understand what is happening?
Also if I can fuse sdb4 and sdb2 as one, and partition it as my home directory without losing its contents?
Below is some information that I think would be helpful.
Thank you.
[miles]> cd /media/usbhd-sdb4/
[usbhd-sdb4]> ls -l
total 20
drwx------ 2 root root 16384 May 28 14:16 lost+found
drwx------ 76 miles users 4096 Oct 15 00:42 miles
[usbhd-sdb4]> cd miles
[miles]> pwd
/media/usbhd-sdb4/miles
[miles]>
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 19.5G 0 part
└─sda2 8:2 0 446.2G 0 part
sdb 8:16 0 465.8G 0 disk
├─sdb1 8:17 0 102M 0 part /media/usbhd-sdb1
├─sdb2 8:18 0 258.9M 0 part [SWAP]
├─sdb3 8:19 0 14.7G 0 part /
└─sdb4 8:20 0 450.8G 0 part /media/usbhd-sdb4
sr0 11:0 1 1024M 0 romCheck your udev rules...
-
Need help for understanding the behaviour of these 2 queries....
Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1 1
A1 3
A1 5
A2 1
A2 3
A2 5
A3 1
A3 3
A3 5
A4 1
A4 3
A4 5
A5 1
A5 3
A5 5
Here in the output, I am not getting rows like
A1 2
A1 4
A2 2
A2 4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1 4
A2 1
A3 5
A4 2
A5 2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1 1
A1 2
A1 3
A1 4
A2 1
A3 1
A3 2
A3 3
A3 4
A3 5
A4 1
A4 2
A5 1
A5 2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old 1: insert into test values('&test')
new 1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old 1: insert into test values('&test')
new 1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old 1: insert into test values('&test')
new 1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old 1: insert into test values('&test')
new 1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy -
Need help in understanding FA acquisition via Internal Order
Hi Gurus
I need your help in understanding the FA acquisition via Internal Order. The process we are following is that we create AUC using the AUC asset class and enter that AUC number in the settlement rule while creating IO. Once IO budget is approved, we release the IO. Once GR is completed, we do the Invoice receipt for the PO, followed by settlement of IO against the AUC. Afterwards, we create fixed asset in AS01 and enter this asset number in the settlement rule for the AUC in AIAB and settle the AUC to Fixed asset for the costs.
My question is that during all this process, I don't see the PO information in the AUC record. When I display AUC, under the Enviornment tab, I see the Purchase order link but when I click it, there is nothing in there. The reason could be that we are creating AUC seperatly and not from within the IO where it says create AUC. I am not sure what is the best way for the whole process.
I would be thankful if you can guide me.
Thanks,
ShaluHi
Can someone please help me with this issue?
Thanks,
Shalu -
Need help in understanding the error ORA-01843: not a valid month - ECX_ACT
Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu.Hello All,
We need help in understanding the Transaction Monitor -> Processing Message (error "ORA-01843: not a valid month - ECX_ACTIONS.GET_CONVERTED_DATE").
And how to enable the log for Transaction Monitor -> Processing Logfile.
Actually we are trying to import the Purchase Order XML (OAG) into eBusiness Suite via BPEL Process Manager using the Oracle Applications Adapter. The process is working fine with expected payload until it reaches the XML Gateway Transaction Monitor, where we are getting this error.
thanks
muthu. -
HT3529 Can someone help me understand why my iMessage no longer works on my iPad
Can someone help me understand why my iMessage no longer works on my iPad
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime and iMessage activation -
I try to sync my nano and get: the ipod cant be synced because there is not enough free space to hold all of the items in the items library (need 100MB) - I have a new computer?? can you help me understand this message: what to do?
Hello pryan1012,
What this message means is that you have more music in your itunes library than there is free space in your ipod.
I had this same issue at one time. This is what helped me put my music on the ipod. I used manually manage.
Learn how to sync muisc here.
Hope this helps.
~Julian -
Hi everyone
I've bought and downloaded Adobe Lightroom 5 for a new iMac 27" intel core 5 3,4 GHz. The machine is only three days old and no more updates are to be found when searching for it. However; after the message that "lightroom 5 has successfully been installed" I don't get to open the program. So I never get to the point where I can register the serial number / registration key for purchased product.
I've followed the instructions that comes with Lightroom 5, but no luck. Also tried to uninstall and reinstall.
No secret that I'm total incompetent when it comes to understanding of computers and software....
Hope someone can help me understand what I'm doing wrong, and sugest some good solutions :-)
ThxI think you may need to uninstall and then start over. There is no installer on the Mac for Lightroom so select it in Applications and send it to the trash. I suggest you download again from a different source. You can use the link below to download the free trial and then validate the software after installation with your product serial number. Ensure you choose your language version and MAC platform from the dropdown list at the top of the page.
After you click download it starts by downloading or updating (replace) the Adobe Download Assistant. You then browse the products and select Photoshop Lightroom 5 to start the installation.
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML -
Hi Pls help me understand this problem
Hi,
I know its a weired doubt, i select (select empno,ename,sal,deptno from emp where ename = 'SMITH')
Result what i have is
EMPNO ENAME SAL DEPTNO
7369 SMITH 800 20
I copied the result from the sql*plus and pasted the same into the same tool,
SQL> EMPNO ENAME SAL DEPTNO
SP2-0734: unknown command beginning "EMPNO ENAM..." - rest of line ignored.
SQL> ------ ---------- ---------- ----------
SQL> 7369 SMITH 800 20
SQL>|
For first copyied line i got error message: SP2-0734: unknown command beginning "EMPNO ENAM..." - rest of line ignored. And for second line i did not get error why ? could any one help me understand this.
Thanks in advance
Mahesh RagineniHi,
The first line from
EMPNO ENAME SAL DEPTNO
7369 SMITH 800 20
is treated as sql statement and gave the error.
the second line is treated as comment hence no error;
In the third line as the line begin with the number
and followed by text it is treated as the sql statement to be added at the given line hence no error. if the first field was not number you will receive error.
for ex:- SMITH 7369 800 20 will give u error.
try this when u get sql prompt after
7369 SMITH 600 20
press / and press enter(to execute the 7369 SMITH 600 20)
then u will receive error.
Regs
Dhananjaya -
CrashReporter - Could you please help to understand this crash report?
Could you please help to understand this crash report below?
If I'm not wrong it started after update the Mac OS X to version 10.5.6 - every startup.
Note: First update by regular update then after by combo.
Thanks in advance!
_ CrashReporter
Process: aslmanager [218]
Path: /usr/sbin/aslmanager
Identifier: aslmanager
Version: ??? (???)
Code Type: X86 (Native)
Parent Process: launchd [1]
Date/Time: 2009-04-05 08:29:52.069 -0300
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000000200000
Crashed Thread: 0
Thread 0 Crashed:
0 libSystem.B.dylib 0x952a8a85 asl_get64 + 11
1 libSystem.B.dylib 0x952aa034 aslfile_fetchpos + 939
2 libSystem.B.dylib 0x952aa2f6 aslfilematch + 339
3 aslmanager 0x00002409 0x1000 + 5129
4 aslmanager 0x00002b3e 0x1000 + 6974
5 aslmanager 0x0000211a 0x1000 + 4378
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x001ffffc ebx: 0x952a9ca1 ecx: 0x00000000 edx: 0x00000000
edi: 0x0000ff3d esi: 0x00100b30 ebp: 0xbffffbc8 esp: 0xbffffba0
ss: 0x0000001f efl: 0x00010286 eip: 0x952a8a85 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x00200000
Binary Images:
0x1000 - 0x2ffd +aslmanager ??? (???) <201b2dea48b8d80ac1432ff85244ed31> /usr/sbin/aslmanager
0x8fe00000 - 0x8fe2db43 dyld 97.1 (???) <100d362e03410f181a34e04e94189ae5> /usr/lib/dyld
0x9444a000 - 0x9444efff libmathCommon.A.dylib ??? (???) /usr/lib/system/libmathCommon.A.dylib
0x951a4000 - 0x951abfe9 libgcc_s.1.dylib ??? (???) <f53c808e87d1184c0f9df63aef53ce0b> /usr/lib/libgcc_s.1.dylib
0x951ba000 - 0x95321ff3 libSystem.B.dylib ??? (???) <d68880dfb1f8becdbdac6928db1510fb> /usr/lib/libSystem.B.dylib
0xffff0000 - 0xffff1780 libSystem.B.dylib ??? (???) /usr/lib/libSystem.B.dylib
_ Log
05/04/09 8:25:58 com.apple.loginwindow[35] Shutdown NOW!
05/04/09 8:25:58 com.apple.loginwindow[35] System shutdown time has arrived
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping Missing Sync Listener
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping HP Trap Monitor
05/04/09 8:25:58 com.apple.SystemStarter[30] Stopping HP IO Monitor
05/04/09 8:25:59 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/Pvsnet.kext succeeded
05/04/09 8:25:59 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/ConnectUSB.kext succeeded
05/04/09 8:26:02 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/vmmain.kext succeeded
05/04/09 8:26:02 com.apple.SystemStarter[30] kextunload: unload kext /System/Library/Extensions/hypervisor.kext succeeded
05/04/09 8:26:35 com.apple.launchctl.System[2] BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
05/04/09 8:26:35 com.apple.launchctl.System[2] BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
05/04/09 8:26:37 com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
05/04/09 8:26:37 com.apple.launchd[1] (com.apple.blued) Unknown key for boolean: EnableTransactions
05/04/09 8:26:37 com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
05/04/09 8:26:37 com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
05/04/09 8:26:49 org.ntp.ntpd[27] Error : nodename nor servname provided, or not known
05/04/09 8:26:57 com.apple.SystemStarter[30] Starting up Missing Sync Listener
05/04/09 8:26:57 com.apple.SystemStarter[30] Starting HP IO Monitor
05/04/09 8:26:58 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
05/04/09 8:26:58 com.apple.SystemStarter[30] Starting HP Trap Monitor
05/04/09 8:26:58 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
05/04/09 8:26:59 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
05/04/09 8:27:00 com.apple.SystemStarter[30] kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
05/04/09 8:27:00 com.apple.SystemStarter[30] kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
05/04/09 8:27:06 com.apple.SystemStarter[30] Sun Apr 5 08:27:06 wslys-Mac.local Missing Sync Listener[77] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
05/04/09 8:27:08 com.apple.SystemStarter[30] _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
05/04/09 8:27:20 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[123]) Exited: Terminated
05/04/09 8:27:20 com.apple.launchctl.Aqua[129] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
05/04/09 8:27:20 com.apple.launchd[116] (com.apple.AirPortBaseStationAgent) Unknown key for boolean: EnableTransactions
05/04/09 8:27:21 com.apple.FolderActions.enabled[130] launchctl: Error unloading: com.apple.FolderActions.folders
05/04/09 8:27:42 quicklookd[146] [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/wsly/Downloads/m090374535329zdwg_650ref.mov>'
05/04/09 8:27:42 Dock[138] [QL ERROR] quicklookd crashed while thumbnailing /Users/wsly/Downloads/m090374535329zdwg_hdref.mov
05/04/09 8:29:52 com.apple.launchd[1] (com.apple.aslmanager[218]) Exited abnormally: Segmentation faultTry repairing the disk through the Mac OS X install disk.
Maybe you are looking for
-
How to give call to dll in indesign plugin
Hello All , I am developing one indesign plugin on Mac OS X 10.4. I want to give a call to one dll in pluging code. But the problem with mac os x according to my knowladge ,dll need to be build in same project where we are calling that dll. That is w
-
Change Data Synchronizer 1.2.5.299 default webside?
Hello, if i connect via browser to by datasync server, the following message occurs - "Forbidden. Not a mobile device"! Where can i change this entry??? I'am not a cherrypy webserver specialist! Who can help me? Thanks for any answer! Regards, Norber
-
LabVNC is running in my Server pc. When I am trying to connect from the web browser of client pc, an error message window is generates in the server. and the labVNC crashes. the error message is " LabVNC server for win32 has encountered a problem and
-
Report ID names to add to menu
Hi, Is there a table that has all the BI report ID names on the system? Thanks
-
Urgent help require-ASO data loading
I am working on 9.3.0 and want to do incremental data loading so that it wont affect my past data.I am still not sure that it is doable or not .Now the question is do I need to design a new aggragation after loading data. Thanks in advance