Help in weired problem for dunning -f150

Hi All
My problem is the following
After I run the transaction F150 , to make a dunning proposal , I want to dun only a limited number of customer   say from level 1-3.
When I click in the change button , I got to another selection screen where I can   put the dunning level .
After putting some vlaue in the dunning level field the program exits with the error message saying Delimitation to the dunning level not allowed
The strange thing is when I run the program with the dunning level field empty , the program runs as it should and I can change the dunning proposal.
I debugged the program RFMAHN21 and I found this piece of code
In my case
CASE h_variant-handle.
WHEN '0002'.
      data ld_lines type i.
      describe table ma_mahns lines ld_lines.
      if ld_lines > 0.
        message s020.
        exit.
      endif.
u2026..
endcase
the program exits as soon as we put some value in the the dunning level field which is the table ma_mahns and the message s020 I written out u201CDelimitation to the dunning level not allowedu201D
I wonder what is the purpose of having a selection option field, when the program exits as soon as the field is not empty.
I have searched sap notes for help but without luck.
Any suggestion would be highly appreciated.
Thanks.

Solved
I had to write a z program based on sap program and delete the exit statement.
cheers.

Similar Messages

Help with installation problems for PE 12; error while installing Shared Technologies. Suggestions?

Help. I've tried to install PE12 multiple times without success due to shared technology installation failure. The install gets right to the end and then fails when trying to launch and uninstalls. Per the help suggestions, I downloaded the ASA, which identified no problems.
Very frustrating.
Any suggestions for someone who is not too tech savvy?
Thanks.

In Windows what has always worked for me is ending any already running PSE/PRE processes from previous or current versions - look for anything with 'Elements' in the name, and 'dynamiclinkmanager.exe'. Then I run the setup program by right-clicking and selecting 'Run as Administrator'. This runs the setup program with even higher privileges than a user account with Administrator privileges.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Help me identify problem for slow export on a powerful machine

Hi,
I am exporting an interview in Premiere Pro CC. It is 1:45:00 long and it has been 20 hours since, but the export is only 94% complete.
Project & Footage:
The footage is a combination of DSLR footage - 5D Mark III, GH3, 650 & 550D.
The edit is all straight cuts with: {a} Color corrector on each clip to match all cameras {b} NEAT - reduce noise on around 10% clips {c} Sharpen (10-30) & {d} An adjustment layer overall with a 3-way color corrector for a simple color grade.
Hard Drives:
E: SSD-RAID for the source footage (Samsung 840 SSD on RAID-0)
D: SSD for previews and cache (Samsung 840 Pro)
C: SSD for Windows, Adobe CC & all programs (Samsung 840 Pro)
G: Simple Seagate Hard disk for Export (used to be a 3 disk RAID but 2 drives crashed some time back)
Other Machine Spec:
Intel i7-3930K overclocked by 10%
64GB RAM
GTX-770 GPU
This is my longest project to date in terms of total time, but last time I did a 1:00:00 project, took around 2 hours not 20.
My concern is I need to understand where the bottleneck is?
My CPU is hardly working a sweat - 40% at max
My RAM is plenty - being used 40-70%
GPU is not even being used in anything (see it at 0%)
Disks (which I was sure was the bottleneck) barely cross 10MB/s
Checked the "power options" in Windows also - everything is set to maximum performance.
It was a big mistake not to send it to Media Encoder as I could have continued editing a different project. Biggest. Mistake. Ever! (no idea why Adobe does not make it a default behaviour?)
I am fairly new to the industry and till last year was using a MacBook Pro until I started getting demanding projects.
I want to know is this normal? If I had used NEAT video for 100% footage then probebly I could have understood this, but its used for only 1/10th of thr footage and I have used NEAT before (but on After Effects CS6) on my Macbook pro (nowehere near as fast as my current machine) and it only added a small overhead - nothing of this sort.
I expected maybe 3 hours to export this 90-100 min seqeunce, not over 1 day.
So what could be the reason? Why isn't one of the above (CPU, RAM, Disk, GPU) at 100%?
I expected 1 of these to be the bottleneck but nothing is crossing 50% even when it should be on full blast.
I dread what if there is small tweak required in the edit once its complete. This video is due on Monday, I would have to reencode for 24 hours.
Please experts - let me know your thoughts. Could it be that Creative Cloud Windows is slower than CS6 Mac & its not a hardware problem?
I am sure I am missing some hardware that is causing this bottlenck. Attaching resource Monitor screenshot (let me know if I should use some benchmark software for you guys to get more information).

UPDATE: My export crashed (and heart sank) after 96% (25 hours). Win7 restarted. I have no clue why (If someone has any tip how to seach logs/dump in Windows to find a reason how, please let me know - I was worried about CPU temperature but that was around 40 deg, I was monitoring it.)
Anyways, so I used Media Encoder now (instead of direct export in PrPro) and made 2 changes:
1. I unchecked "Render Maximum Depth" just as it is in the the default Youtube 1080p@24p preset (but kept the keyframing distance at 24 instead of 72 which is default).
2. From VBR - 2 Pass, I made it CBR
Its been 15 min I started the export and the video is 20% encoded already, with remaning time just 00:30 min.
Now I am flabergasted.
Did not using maximum depth & VBR- 2 pass alone make such a difference? From 30 hours to 1 hour? I am still using all the video effects and absolutely no change to the edit.
I am seeing 2 differences the way my machine is working:
1. Is Adobe somehow using some old renders it did for the last export? I am using disk utility and it is refering to original source files and some "Media Encoder preview files" which I think it was not using before (could be wrong)?
So all that hard work it did for 25 hours is being utilized and if I do such a project again it will take me 30 hours again. Right?
2. GPU is now being used (and to good effect). How is GPU being used now? I am not scaling or using any fancy effects. Just Neat Video, 3-way color corrector & Sharpen.
This was before (export done in Premiere Pro directly):
And this is now:
Very sad that no one (even from the Adobe Staff) has replied to my post. Did I say something inappropriate or TMI?
C'mon guys I am on the Creative Cloud - show me some love

Help!! problem for insert a date in postgre from creator

i formatt the date, and this code:
SimpleDateFormat sdm=new SimpleDateFormat("dd-mm-yyyy)";
Date fecha= sdm.parse("12-05-2007");
compraDataProvider.setValue("fecha",rw,fecha);
display this error
Can't infer the SQL type to use for an instance of java.util.Date. Use setObject() with an explicit Types value to specify the type to use.

postgres (PostgreSQL) 8.0.13
postgresql-8.0-319.jdbc3.jar
i have the same problem with postgresql
i cant insert a row in a table with two columns codigo and name
public String salvar_action() {
CachedRowSetDataProvider cdp = getHombreDataProvider();
try {
RowKey rk = cdp.appendRow() ;
cdp.setCursorRow(rk) ;
cdp.setValue("hombre.codigo",rk,codigo.getText()) ;
error("paso aqui 1");
cdp.setValue("hombre.nombre",rk,nombre.getText()) ;
error("paso aqui 2");
cdp.commitChanges() ;
info("Row Inserted via Data Provider") ;
cdp.refresh(); // release rowset memory.
} catch (Exception ee) {
error( ee.getMessage() ) ;
return null;
did the same thing with firebird and no problem.. doing that..
anyone knows some solution?

Need help with restore problem for itunes v 7.6.2

I just installed itunes version 7.6.2 and I plugged my ipod into my computer and hit the restore button so i can erase and redo my ipod. Then when I plugged my ipod into my computer my ipod is stuck on the restore mode and i can't see the information bar or the music bar under my ipod name. I can only upload music and eject my ipod. PLEASE HELP!!! this is so fustrating.
this is what the screen looks like when i click on my ipod or plug it in.

Minimize your iTunes, right click on your Desktop, click Properties, click the Settings tab. Increase your screen resolution to 1024 x 768. If it looks OK, click OK. You should be able to continue with your iPod.
CG

Help Please, Battling Problem For Months

This is the first time I've posted on SunJava's forum, and hope I'm doing this right ^^; Please do correct me if I'm wrong.
For months, I haven't been able to compose mail on web-based email, view sites programmed in Java, or use Angelfire or Geocities or other similar programs. I've installed the Windows XP Service Pack 2 and attempted to Reinstall IE6, but was unsuccessful and go an error message. I've installed SunJava and enabled it under Internet Options' Advanced Tab. I've searched the web, Google and Forums pertaining to the topic, but haven't found anything that has worked. Any advice? Thanks! Greatly, GREATLY appreciated.

I'm not really sure if any of the sites you mention actually use Java. Hotmail, for example, does not use Java. Most do use JavaScript though, which is something entirely different and is not a Sun product.
This isn't really the right place for questions like this. Although most people probably won't mind posts such as this, the forum is intended for use by people developing software using Java.
You might want to check out http://www.java.com/ instead. That's the official resource for 'consumers' (i.e. people NOT interested in writing programs using java, but only in using the programs themselves). There will probably be some facility there for reporting bugs or answering questions.
As a last resort, you might want to try using another browser. For example, take a look at the products at http://www.mozilla.org/ A lot of people actually prefer those browsers to IE for numerous reasons, including better security

Help network connecting problems for netflix

We have been having issues trying to watch Netflix with our Sony blueray player with our apple wireless airport extreme. It will work fine for days, then halfway through a movie all of a sudden everything quits. When we try to reconnect the network won't reconnect. It used to work fine and the only difference is we got a new Samsung Television. I called Time Warner and they say its Netflix fault. Netflix says its Time Warners fault. I don't know because occasionally it works fine. Any suggestions?

Just try reboot ur router sound like hav only limit signals release only working other laptops not to apple so do this first.......take off both cables from back of ur router power and internet and then put back after 15 sec and then check ur apple products is working.

Need few field information in Dunning F150

Hi Friends,
I am here because I haven't get any functional specification regarding the Script that I have to develop for Dunning F150. The client's requirement is as follows:
1. In the first reminder they had some standard fromat includes, that should display the due date and the OPEN ITEM in the form coming from transaction.
2. In the second reminder the due balance amount to the company and the previous due dates.
3. In the final reminder it should dispaly the first two reminder dates and the pending balance to the company.
Here my problem was, I couldn't analyze where all these fields are coming from...Can anybody please suggest me the fields where can I get all these fields and from which table does this open field and the rest belongs to.. with their descriptions.
your help is appreciated.
Thanks in advance,
Murali.

Did you check you set the Expand to Height property for the Text field? Also you need to set the Expand to Fit property for the Subform that surrounds the Text Field in the middle of the form.
Thanks
Srini

Report for Dunning

Hi Experts,
Any one has written report for Dunning.(F150)
Scenario: transcation code F150 can't be schedule; it's runs manually by users.
we need a report same as what F150 is doing so that we can schedule in job.
if any one knows report for dunning ? I know fot he payment F110, there is a sap report progarm but not for Dunning(F150).
Can anybody suggest me ??
Thanks in advnace for the help.
Regards,
Nupur

Hi Hemanth,
Customizing:
You can go the Transaction FBMP and add your Form name as well as the Print Program name.
These would be call when ever you run the dunning Program.
From the Layoutset yuo can use the PERFORM subroutine using and changing parameters which would have the Structure ITCSY.
The Form then needs to be present in the Driover Prpgram.
Please let me know if this is useful.
Regards,
Deepak

Help need for Dunning letter (F150)

Hi Experts
I have a problem with dunning letter
In level 1 only the client needs Two tables data , In table one i need to print the over due items only and in table two i need to display all items(it may overdue or not) in main window.
In debug i have find PRINT_DUNNING_NOTICE (FM is triggring).
i have printed the table one data by using the text elements 530 - Line item heading , 531-- Line item line layout ,
My question is how to print the Table two data, i didnt find other text elements for solving the problem.
in this case what needs to be done, can we create the same text elements like 530 & 531 & 581 & 582.
Thanks in advance
suresh

Hi
I got the Result by doing the below process..
Dunning outputs use the function module FI_DUNNING_PRINT_NOTICE. You can copy this to a Z function module and make some changes to the data selection. You will have to look into the code and decide what changes you need.
The process to use a bespoke program to do the dunning print is as follows:
UNDER FI GLOBAL SETTINGS in the configuration,
There are Business Transaction Events. Within that you can configure the same to enable a Z function module in place of the standard function module (from the FUNCTION GROUP F150)
u2022 Create function group ZFTP_F150
u2022 Copy standard function module FI_PRINT_DUNNING_NOTICE of function group F150 to ZFTP_FI_PRINT_DUNNING_NOTICE in function group ZFTP_F150
u2022 Copy standard function module PRINT_DUNNING_NOTICE of function group F150 to ZFTP_PRINT_DUNNING_NOTICE in function group ZFTP_F150
u2022 Within the function module ZFTP_FI_PRINT_DUNNING_NOTICE, change function module call for PRINT_DUNNING_NOTICE to ZFTP_PRINT_DUNNING_NOTICE
u2022 Create a new include ZFTPI_ROUTINES within the function group and copy the subroutines LOG_MSG, LOG_MSG_TAB, & LOG_SYMSG from the function group F150 to this include
AS AN ALTERNATE, YOU CAN COPY THE WHOLE FUNCTION GROUP
u2022 Maintenance view TBE31 (SM30). Change the function module from FI_PRINT_DUNNING_NOTICE to ZFTP_FI_PRINT_DUNNING_NOTICE against the event 00001720 FI-FI entry

Customer invoices are blocked for dunning automatically when we run F150

HI All
when we are running the dunning (T.Code F150) for one of the customer invoice items are blocking for dunning automatically.
the customer master setting for dunning block fields is empty and there is no changes for this field.
These invoices are created recently and could please help to find a solution for not happened the same in hte next dunning runs?
thanks in advance
Best regards
Venu

Hi,
Customer automatically gets blocked if the Customer has NO Line Items which can be considered for Dunning.
Before running the Dunning check weather the customer master us updated with DUNNING Variant and also check for the weather the Line items are over due and if so check the Dunning Procedure for Dunning INTERVAL and also the Arrear Days for each Internal.
Hope this will Help you .
Thanks
Goutam

Place to put a code for dunning level change in F150

Hi,
I have a requirement to block the credit management of a customer ( KNKK-CRBLB) when dunning level of a customer reaches 3 (KNB5-MAHNS or MHND-MAHNS).
I put my code in FM 'CHANGE_DUNNING_DATA'. But this FM is executed only for the few cases. Reasons are unknown to me. It may be because this FM is called in another FM 'PRINT_DUNNING_NOTICE'.
I believe that dunning is completed when the dunning notice is successfully mailed, faxed or printed. Then only the customer master is updated.
The program for F150 is SAPF150V. But neither KNB5 or MHND is updated in this program.
I tried BTE's also. But none of the BTE's is called when a dunning notice is printed.
I am not able find the place where i can put my code.
Kindly help..!!!!

Hi
With the field that I told you in OVA8 you can achieve to lock some SO or delivery because the customer has some level in dunning (it's updated from F150 but you can change it in customer master). To know BTE's in dunning see SAP Note 156985 - Reference Note: BTE for dunning, but I have doubts that it will help you
Regards
Eduardo

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

How not to print all the pages of a smartform? (for tr F150 - Dunning)

Hi Forum
We have the follow situation:
For DUNNING (transaction F150) the user want stamp 3 diferents SMARTFORM.
For the first time the transaction is executed is required only a list of documents, for the second time (via sample printout, indiv dunn notice or dunn history) once the legal data of the customer is updated, the user wants the list of documents, a letter for the lawyers and a letter for the client, in the follows executions (3 and up) the user can require only the list of documents or all smartforms (list and letters)
Via customizing we can control the normal dunning and the legal dunnig, but once the client is in legal status the transaction create only the legal smarforms.
We found an user exit associated EXIT_SAPF150D_001. in the F150 transaction, but is not complete, in sense that are failed some parameters .
Another option is create an unique smartform with 3 pages where we can control the case for the print, but here is where we ask: How we can do to print a specific page of the smartform without print all of them (how can we print the 2nd and 3rd page without print the firs one) ??
To control the 3rd execution, we can create a dictionary table with a flag .
Thank you for your help

You could create a report containing all the single reports in one using UNION. This report could be placed on a "hidden" page. The link for downloading that report you can place on your page. That should work.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

Dunning Letter for transaction F150

Hi,
I have developed a dunning letter , level 2 for transaction F150.
As per the requirement it should display the balance in the beging rather than in last (as it was before)
so I coped the print program and did some changes and Assigned that program to my sap script....
but when i am going in debugging....
it is taking the old program only...
Anybody having any idea where to configure my new program??
Thanks and Best Regards.
Kusum.

Hi Dubey,
You can check the following customizing settings :
Define Dunning Forms (with SAP Forms)
We Require some standard u201CSPROu201D settings :
The standard settings allow us to create dunning notices using SAP Smart Forms, we must first define the corresponding function module in u201CSPROu201D.
1. Financial Accounting (New) Financial Accounting Global Settings ( New ) -->Business Transaction Events.
The SAP Business Framework screen appears.
2. Choose Settings -> P/S function modules -> ... of an SAP appl. .
Continue..
3. Under the Business Transaction Event (BTE) "1720" with application indicator FI-FI, change the function module name and save your entries.
Standard settings in u201CSPROu201D
Financial Accounting (New)--> Accounts Receivable and Accounts Payable -->Business Transactions --> Dunning --> Printout ->Assign dunning forms.
Select u2018Dunning Procedureu2019 and choose u2018Forms for normal dunning procedureu2019
Choose u2018Company Codeu2019
Change the name of your dunning form
I thought, it will work for your requirement.
Thanks
Raghava Vakada

Help in weired problem for dunning -f150

Similar Messages

Maybe you are looking for