Help! : Install and configuration of OID and LDAP

Hi,
I'm trying to install OID and run a LDAP server.
I installed OID in my 9iR2 database, it seems ok.
When I try to connect in ODM, it says 'LDAP server not running'... I don't find in Control panel/services any service naming like 'LDAP' (I just find "ODS_sid" who is runnig), is there something I forgot to install ??
In the same way I haven't any tables in ODS/ODS@my_sid, is it normal ??
Thanks in advance,
Sandrine

Hi Diego,
The maximum number of concurrent users logged on allowed by the current license keys has been reached.
Attempt to log on later after other users have logged off, or upgrade the license keys.
Or you can get in touch with your Accounts Manager to check the license keys, whether they have been expired, or need to be upgraded.
-Shreyash

Similar Messages

Total newbie needs help installing and setting up Solaris 10 as a server

i'm attempting to set up one computer to act as a file and print server on my home network, so that i can store all of my music and video files on it instead and print to my parallel-only laser printer. 80% of the time i'm using my laptop, so i need the mass storage and printer to be handled by another device - the server!
i'm not sure if i'm even installing Solaris 10 correctly. how should it be installed to then act as a server? my two (incredibly long, like 3+ hours each) install attempts so far have resulted in an OS that looks like a nice fancy GUI-laden desktop which doesn't appear to show me my 750G SATA storage drive (the OS is on a 40G IDE drive).
in the end, i'd like to have the system working so that my only interaction with it is the power button - press it once to power it on and it'll boot up and long in automagically and make itself seen over the network (with printer and files stored on drives accessible to my laptop or any other PC that's on the same network), and then press the power button again to shut down the entire system gracefully (so far, when i press the power button, it's a quick kill like pulling the power cord - i'm pretty sure that's a bad way of having the system shut down, so how do i change it?)
i'm really hoping to use Solaris due to the promising ZFS scheme. my only exposure so far to unix / linux has been with ubuntu, which i usually like but sometimes loathe (primarily file permissions and network manager).

Let's try step by step rather than asking for setting up a server as a while and I'll try to help you as much as I can.
For setting up a printer, it's not that easy or quick setting up a printer on Solaris, I mean it's not like plug-n-play. Tell us about your printer and how it's connected to your system (usb, ethernet, parallel, serial).
As for shutting down the system, it's recommended to use the shutdown commnad like this:
# shutdown -y -i0 -g0
--gibb

I need help installing and running Adobe Acrobat XI Pro?

I cannot get the Acrobat XI Pro program to run.

Hi DorioleV
What is the error you're getting ?

Installing and transferring media from my PC or Mac to my pods

First and fourth most Hello, I'm new to the Apple board! I apologize for jump right in....but....I need help installing and transferring media from my PC to ipod, iphone and Apple TV! Can anyone help??? Thank you, DJ

You might find these sites helpful:
The New User's Guide for iTunes
iTunes 101
iPod 101
The manuals for the iPod and Apple TV and the iTunes Help files are also worth reading if you haven't already.

How to install and configure OID using 11g R2 installers

Hi,
I need to install and configure OID, I am having installers of Oracle Identity and Access Management 11g (11.1.2.1.0).
Please let me know how to install and configure OID.
Thanks

Use the R1 IDM package. R2 is only for IAM.

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

How to install and configure Business objects on a local Maschine

Hi Experts,
i am a newbi in BO and would like to work with BO.
The first thing i learned was to install and configure BO on my notebook.
I downloaded the followings Tools:
- CR Report 2008
- Integration Kit
- Live office 3.1 Upgrade
- Web Intelligence
- XCelsius
By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
2. Before installing Query as a webservice i should first install:
    - BusinessObjects XI Release 2 SP2 Enterprise Edition
    - Web Services--> What is that and where could i download it?
    - Tomcat or another supported Web Application and JDK--> where can i download it?
3. .What is NET 1.1? Where to download it and how to install it?
Any information or expereince will be very appreciated.
Thank you in advance for your Input.
Pat
Edited by: Gilo on Feb 1, 2009 12:25 AM

Hi Pat,
            You can get the guides and Installtion guides from this
http://help.sap.com/businessobject/product_guides/
You can download the from
.subscribenet.com
you can enter the user name and password then you can download the Business Objects software that can be download.
"By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
Regards
Prashant

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to install and configure configure IGS for J2EE server 700

Hi,
Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
Please let me know the procedure for this.
Thanks an Regards,
Smriti.

Hi,
Check the below link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
Regards,
Suresh.T

How to install and configure SNMP through a script(shell script/power shell/python)

Hi all,
I need a script so that once it is run on windows 2012 server r2 ,snmp should be installed and configured automatically ,giving minimum user inputs.Things like snmp server ip,community string shouls be configured.
SNMP services should be up and running with the script

Hi,
Please check if you can use
Install-WindowsFeature PowerShell command to enable SNMP. Meanwhile, please also refer to following article and check if can help you.
How
to Install SNMP Remotely
However, based on your description, the issue seems to be more related to script. I suggest that you should
post it in
Windows PowerShell forum or
Official Scripting Guys forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install and Configure sharepoint foundation on administrator account ??

Hi there guys dev
I want to try sharepoint foundation for first time .
I installed windows server 2012 ans sql server 2012 and then installed sharepoint foundation 2013 .
now when I want to create a new server farm enter my windows name as database name and then enter my administrator account name as username ans it's passwors as password but after then when I click on next to create new server farm give this error :
"the administrator account can't use for new server "
please help how can I create a new server farm with administrator account .
I don't want to create it with the active directory domain and add new forest and create it with my domain name ?
if does it a way to create a new server farm with administrator account so please help to create it ?
thanks dear
Great Regards :
Raha
whit the best regard : Raha

Hi Raha,
According to your description, my understanding is that you got an error when you created a new farm with the administrator account by runnning configuration wizard.
Is the SQL Server installed in the server that hosted SharePoint 2013 Foudation? If not, please make sure the server hosted SQL Server has the same account with the server hosted SharePoint 2013 Foudation.
Please run the SharePoint 2013 Products Configuration wizard with ‘Run as administrator’.When you entered the user’s name, please use the format ‘domain\user_name’.
In addition, please check the log file to find more information about this issue. The path is : C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Also , you can use Event Viewer to find the log by Start->Run->event viewer.
Here is an article for installing and configuring SharePoint 2013, please take a look at:
http://sharepointv15.wordpress.com/2012/07/19/installing-sharepoint-2013-preview/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

BPM 11g install and configuration with Webcenter

Hi,
I am new to this BPM so need some help in installation. Where can I download the latest version of BPM 11g and for installating it what steps do I need to follow. Also I need to integrate Webcenter also so for webcenter integration what do I need to install and configure with BPM 11g.
Do I need to install webcenter full suite for integration with BPM and if so can I install both BPM and webcenter in one home iteself. Where can I find some documentation arround installing BPM and configuring with Webcenter.
Thanks

Hi,
Need some info on the install I have to install both SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3 on the same box. I have installed the SOA BPM 11.1.1.3 but wanted to find out what is the best option of installing Webcenter 11.1.1.3 as I need to integrat SOA BPM 11g 11.1.1.3 and Webcenter 11.1.1.3. Here is what I think are the options but don't know which one should I go for or is there any other option but the fact is I need to install both on the same box.
*1. Should I install Webcenter in a separate HOME in doing so I will end up installing weblogic again and then install webcenter. Will endup having two ORACLE HOMES one for SOA BPM and one for Webcenter.*
*2. OR should I install Webcenter in the same home as SOA BPM and create a new domain in doing so what happens to some of the components that are installed when installing SOA BPM.*
*3. OR should I just extend the SOA BPM Domain and have both SOA BPM and Webcenter installed in the same domain. I believe this will only add the webcenter components but don't know if there are any issues.*
And help is really appreciated..
Thanks

How I can install and configure dg4odbc to access SQL Server database

I need to link Oracle database (installed in Solaris) to SQL Server database. How can I install and configure dg4odbc. Is there any step by step tutorial or guide available there.Thanks in advance.

Hi,
You can download the DG4ODBC software from either MOS or eDelivery depending which versios you want to install
For 11.2.0.4 -
Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
- login to My Oracle Support
- click on 'Patches and Updates'
- search for patch number 13390677
- you may need to press the '+' button to see the platform list
- scroll down the list to and click on the 'Oracle Solaris on SPARC (64-bit)' option.
- on the next screen click on the 'Download' option
- from the list of download files choose -
p13390677_112040_platform_5of7.zip
- this is the Gateway media pack and has everything needed for a standalone gateway install.
- unzip the file and run the installer and choose the gateway you want.
For 12.1 -
https://edelivery.oracle.com
Product Pack – Oracle Database
Platform – Oracle Solaris on SPARC (64-bit)
Oracle Database 12c Release 1 (12.1.0.1.0) Media Pack for Oracle Solaris on SPARC (64-bit)
- then for the gateways download –
Oracle Database Gateways 12c Release 1 (12.1.0.1.0) for Oracle Solaris on SPARC (64-bit)
- unzip and run the installer
Whichever version you decide I recommend you install into a completely separtae ORACLE_HOME from any existing installs as this makes maintenacne easier.
For the configuration have a look at this note if you have access to My oracle Support -
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
If not, then refer to the documentation available from -
Oracle Database Help Center
- choose either 12.1 or 11.2 then the 'Information Integration' option.
You can also install the DG4ODBC on the Windows machine (or any other machine if preferred) and access it from the RDBMS on Solaris.
Regards,
Mike

Installing and Configuring Microsoft IIS plugin for weblogic server

Hi guys,
I want to navigate from "a page in website hosted on IIS" to "a page in application hosted on weblogic". I found out that there is a plugin for Microsoft IIS that can proxy requests to weblogic server. The documentation of the plugin can be found on the following address:
Webserver plugin
I want to know about the configuration of machines. Can IIS and weblogic be on the same machine or different machines???? Where i have to install the plugin????
I am not able to find this in the above documentation.
My environment is:
1) Weblogic Server 10.3.5 installed on windows server 2012.
2) Forms and Reports 11gR2 are installed on this weblogic server
3) Apex Listener is also installed on the weblogic which communicates with a different db server.
4) I also want to install JDeveloper and ADF on the same weblogic server and call applications developed in ADF (like jsp page) from Microsoft IIS website.
Please help me and give me suggestions.
Regards,
Waqas

There is a free ebook here:
http://www.microsoft.com/en-us/download/details.aspx?id=30384
It's also the title of a section of technet but that's not available in printed format as far as i know.
http://technet.microsoft.com/en-us/library/cc262957.aspx

Firefox 27.1 silent install and configuration(homepage, proxys and bookmark)

Hello,
I am trying to perform a silent install and configuration for Firefox 27.1 but I am not able to get the same results I got with versions 26 and below. For these previous versions I used the method described in this link:
http://www.mockbox.net/configmgr-sccm/174-install-and-configure-firefox-silently
But for Firefox 27 creating the Mozilla.cfg and the other files doesn't seem to work. Could you please tell me how to silently configure the proxys and homepage on Firefox 27.1 during the install. I also need to add a bookmark during the installation. Could you please tell me how to do that as well? I found some methods saying I had to edit a bookmark.html file but I don't think this file is present on firefox 26 on.
thank you in advance.
regards.

thank you for your reply guigs2, unfortunately none of those links were helpful for me. As I mentioned in my question I already tried the silent install method using the Mozilla.cfg file. It worked for the previous versions but it doesn’t work for version 27 anymore. As for the INI file, that doesn’t help me either since I need to configure the homepage, proxies and bookmarks all during the installation, for the INI all I’ve seen is that you can configure INSTALLDIR, shortcuts etc. Configuring proxies, homepage and bookmarks through group policies as one of the solutions said is not an option for me, I need to do that during the silent install of Firefox 27.

Help! : Install and configuration of OID and LDAP

Similar Messages

Maybe you are looking for