Help - Installation

I need help to install my Adobe Acrobat XI Pro.  I have a soft version on my computer.  I need help with the installation and do I delete the s/w that's on my computer now?

Hi ,
Kindly confirm the version that is available on the computer is that an Acrobat pro XI only as a trial or a different product ? If it is just a trial version , then you can simply go ahead and enter the serial number in the trial prompt and activate the product that way .
Or if it is a different version , please use the link mentioned below to download the product on your machine : http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct- download-links.html
Regards,
Kartikay Sharma     

Similar Messages

  • Need Help - Installation failing at:  Phase 25 Intsall instance basics

    Hello everyone,
    We are trying to install solution manager 4 on linux readhat E4 (oracle db).  Currently, we are stuck at phase 25 "install instance basics.   I can see at the bottom of the screen, the message says the phase is "Creating instance directories for instance <SID>/scs01.   The error message (only thing I can see in the logs) - and on the error popup is shown before.  Anyhow have an idea of what this could be?  I thought perms, and even 777'd (temporarlily /usr/SAP and /sapmnt/<sid>), and no effect... it seems to point to a function module, but the strange thing is... no one even references this error anywhere on here, or anywhere else...
    Anyhow, all help is greatly appriciated:
    logfile below----
    ERROR 2008-01-11 18:15:49.780
    FJS-00003  TypeError: pf.getPath is not a function (in script NW_Onehost|ind|ind|ind|ind, line 22616: ???)
    ERROR 2008-01-11 18:15:50.69
    FCO-00011  The step createInstanceDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|0|0|createInstanceDirectories was executed with status ERROR .

    Hi
    For the benefit of the people who might come across same issue in the future.
    Error:
    ERROR 2013-06-07 14:10:05.821
    CJS-30217  Instance 'SCS10/NEPTUNE' of SAP system SM1 is in an inconsistent state: the processes do not seem to have been started within the instance.
    ERROR 2013-06-07 14:10:06.94
    FCO-00011  The step stopInstance with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_Instance|ind|ind|ind|ind|scsInstance|0|stopInstance was executed with status ERROR ( Last error reported by the step: Instance 'SCS10/NEPTUNE' of SAP system SM1 is in an inconsistent state: the processes do not seem to have been started within the instance.).
    Resolution:
    Kill the process that is running using 3910 Process ID (as the issue is with SCS instance). Once I killed the process retried the install and the issue got resolved.
    Command to check the process that is running on 3910 port
    netstat -a -o -n | findstr "LISTENING" | findstr ":3910"
    Once you know the process ID from the above command killed it using the command below
    taskkill /F /PID <pid>
    I think I faced this issue as I stopped my install inbetween due to memory shortage issue. After resolving the memory issue and retrying the installed the installation porcess would have found the process that did not get deleted.
    Thanks
    Naresh

  • Need Help - Installation of iLife '06 crashes - no thumbnails in iPhoto 6

    Hi folks,
    I hope someone can help. I'm running a G4, dual 1.42GHz, FW800, with 10.4.5. I bought iLife '06 today to install. When I run the installer, here's what happens:
    The following process are completed successfully:
    - Installing iPhoto
    - Installing iPhoto Resources
    - Installing iMovie
    - Installing iMovie Resources
    - Installing iDVD
    - Installing iDVD Resources
    Once the above tasks complete, the installer crashes and askes me to rerun it.
    I've duplicated this several times.
    I went into my Applications folder and I opened up iPhoto and it told me I had to update my photo properties or something like that in order for me to run iPhoto 6. I clicked the Update button and it started working and then i Photo crashed. I ran it again and it worked but now I have no thumbnails of my photos at all. It's just blank with little dashed lines in a rectangle with an ! in the middle.
    When I opened iMovie, it was o.k. When I opened iDVD, I got the spinning beach ball.
    So what do I need to do to get this software installed correctly? Where are my photos and why can't I see them. Please help.
    Thanks,
    Ed

    Ed44:
    Welcome to the Apple Discussions. After the crash did you try to repair the disk permissions? That should be done after any software installation or update.
    Try the following:
    1 - boot into your system install disk that came with your computer and run Disk Utility from the Utilities menu and repair the disk, not permissions.
    2 - boot back into your normal boot drive and run disk utility and repair disk permissions.
    3 - download and runiPhoto Library Manager and, with the Add Library button, add your library to the list on the left.
    4 - go to iPLM's File menu and select Rebuild Library.
    Once it's done see if that helped. If you have a large library it will take a while. One user with around 5000 photos reported about 12 hours so plan ahead.

  • Help -  Installation Icon in Spanish !!

    I purchased a Sony e-reader PRS505 for a Christmas present and wanted to download 2 books.  Everything was in English until I had to click on the 'installation' icon which was in Spanish, as were the rest of the download instructions.  I have had no help whatsoever from the "support" team - There seems to be no way to change this to English.  I did manage to download successfully, as I know a little spanish.  Help needed please

    Are you asking about Digital Editions or the Sony Ebook Library.  For Digital Editions, the language is determined by your Operating System localization settings.

  • Please could someone Help (installation Problems on Web design Premium cs4.)

    hi there everyone, sorry I'm new to this and probably in the wrong place. But hope someone is kind enough to help me. When I place disk one in I put in the serial code and everything pops up and looks good however, when I want to download the only one I can select to put on my computer is Acrobat non of the other programs will select. it'll download that fine then says complete then an exit button. I hope someone can see if there's something I'm doing wrong or if you think I've got faulty disks, this is a student version.. (not sure this makes a difference but thought I better say just incase.)
    Many thanks for anyone who can help.
    Lara

    Hi - I bought the student version through my college and was so EXCITED! Then it took me over 8 hours (and much of that on the phone to Adobe support) to get the suite installed.
    In the end it turned out we had to stop all the Microsoft and Windows processes in Task Manager during the installation - something to do with 64-bit vs 32- bit (I have a 64-bit version of Vista running)
    This was scary to me as I do not like to mess with Task Manager in case I mess something up...
    I would not reccommend doing this just on my say-so without getting more help, but it could give you a starting place for asking more questions.
    I will say, that although it took what seemed like forever, and at times she seemed as stumped as I was, the woman at the Adobe  end of the phone was very patient and helpful.
    Good luck,

  • Sapdoccd.log.........error during Online help installation

    Hi guys,
       I configured the Online help with the PlainHtmlfile format on our server, i shared the SAPHelp folder on our server. While trying to view the SAP Library from a client side.it gave an error. when i checked the sapdoccd.log file this is what i got.
    Program path =     C:\Program Files\SAP\FrontEnd\sapgui\HTMLHELP\SHH.EXE
    SHH version  =     7.1.0.5
    Command line =     "TYPE=3&SERVER=&PATH=
    6.11.2.119\SAPHelp\PlainHTML\helpdata\EN&SYSTEM=NGD&_CLASS=IWB_STRUCT&_LOIO=&_SLOIO=e18e51341a06084de10000009b38f83b&LANGUAGE=EN&RELEASE=600&IWB_COUNTRY=&IWB_INDUSTRY=SEM-BW&_SCLASS=IWB_STRUCT&FRAME=X"
    Info:          --- Default settings from command line ---
    Info:          HelpType=PlainHtmlFile
    Info:          PlainHtmlFilePath=
    6.11.2.119\SAPHelp\PlainHTML\helpdata\EN
    Info:          --- Contents of profile "C:/WINDOWS/sapdoccd.ini" ---
    Info:          Could not read profile "C:/WINDOWS/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapgui/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapgui/sapdoccd.ini"
    Info:          --- Contents of profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini" ---
    Info:          Could not read profile "C:/Program Files/SAP/FrontEnd/sapdoccd.ini"
    Warning:     Could not read any profile
    Info:          --- Starting PlainHtml ---
    Info:          URL="
    6.11.2.119\SAPHelp\PlainHTML\helpdata\EN\e1\8e51341a06084de10000009b38f83b\frameset.htm"
    Info:          --- Version info ---
    Info:          Microsoft Windows Server 2003 version 5.2 Service Pack 2, v.4035 (Build 3790)
    Info:          Microsoft Internet Explorer version is 6.0.3790.4275
    Info:          Microsoft HTML-Help version is 5.2.3790.2825
    What do i do?
    Regards
    Edited by: Basisman on Feb 23, 2010 7:13 PM

    Hi,
            Restart the installation from the begining
    Regards
    Umesh K

  • Help - "Installation failed" Mac OSX could not be installed

    I have had a really lousy day with the Leopard install. I got the five license family pack.
    2 x white MacBooks - fine - although on one the DVD kept spitting it out and after about 10 goes it worked.
    1 x Mac Mini - blue screen upon restart. Still not fixed.
    1 x 24 iMac - fine
    1 x 17 iMac - DISASTER
    I need help on the last one and can't find a post anywhere.
    I did the install. It started back up and I was ready to rock and roll. But it changed by account to "standard" rather than "administrator". Spoke to Apple, suggest erase and clean install, started that, then read a post on how to fix this after wiping. So that put me in a foul mood...
    Then, I put the Leopard disk in and then did the erase, repair, verify, etc. I then chose the now blank hard drive as the destination drive. It then goes through the motions of calculating the time remaining, etc.
    After about 5 minutes of "installing" I get a whopping great big exclamation mark and the text "Installation failed, Mac OS X could not be installed on your computer, The installer could not validate the contents of the "base system". Contact the software manufacturer for assistance. Click restart to restart your computer and try installing again". I have tried this a few times - no good. Apple Australia is now closed for the night.
    So I went back to my original 10.4.8 iMac install disc and thought I would try that. I would then put Leopard over the top of that. It says it can't install this operating system on the selected drive.
    So, I can't install the new, I can't install the old.
    HELP!!!
    Thanks,
    Andrew
    Sydney, Australia

    Me and my folks bought a copy each. I installed mine on my Macbook Pro and there was no issue. I went to my folks to help them as they are not as confident as me and had a disaster. They have a first generation current configuration iMac G5 (the one just before isight was added). But the installer completely freaked. The log spat out heaps of errors. Each attempt got completely different behavior. Sometimes it would just go idle and do nothing more. Two attempts that got further than the idled attempts ended up failing about half way through telling me the disk is damaged. The disk looks perfect and the installer verification checks out. I checked the disk on my MBP and it checks out there too. No trouble starting up from it or accessing any of it's features. So I tried it out on my macbook pro and it works fine. So I checked out the iMac with disk first aid and it checks out also. The end result was I had to reinstall 10.4 and run the updates over it and give up. Took me all week end (just finished just now)... Also the ROM is ok as I installed the 10.4 version without a single error in the log. They will be returning their copy to the store monday!
    --- Added
    Incidentally. When I installed at home I was able to deselect everything except the system essentials. But at my folks the installer wouldn't allow me to deselect the languages. The difference between the two is I did a fresh installer and they asked for me to just do an update. In my attempts I did end up doing an archived install, no difference. Only thing I didn't do was a format install. In the end I should have tried as I had to reinstall 10.4 from scratch anyway and ret a few things as the installer had partially installed the new OS. I just didn't have much faith in the formatted install from working either as at the time I wasn't sure if the ROM had an issue with the disk or if there was some fundamental conflict with the hardware, either case wouldn't suggest that approach would work any better.
    Message was edited by: osihara

  • Help: Installation questions

    Hi @all,
    i want to install the oracle developer suite 9i (complete).
    I do not understand one step of the installation
    process:
    - Provide Outgoing Mail Server Information
    I do not know what i have to do there.
    Have i to install and configure the Oracle 9i AS
    before installing developer suite?
    Is this important when i want to work with Forms
    and JDeveloper or Designer?
    What is a possible entry, when i do not have a
    mail server?
    Or can i ignore this step?
    Thank you for your help.
    Greetings
    Ingo from Germany

    Provide Outgoing Mail Server Information<<You can optionally provide your Outgoing SMTP Mail Server. If you do not know this info pls ask your sysadmin.
    Also you can add it manually even after the installation at
    $OH\reports\conf\<server_name.conf>
    <!--pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam-->
    This is **optional**. You can skip it. This will be used by Reports if you want to email your reports.
    If you do not provide this info Reports cannot email reports. Otherwise there is no other impact.
    Have i to install and configure the Oracle 9i AS before installing developer suite?<<<No.
    Is this important when i want to work with Forms and JDeveloper or Designer? <<By "this" - You mean "Mail server info" ? - No
    By "this" - You mean "Oracle AS" ? - No
    Using developer suite you can build reports, forms etc. You can test it in Builder, Forms builder etc. There are also
    application server containers provided for testing.
    Once it is tested users can deploy it on iAS (which provides many other services like Security, Single signon etc).
    But for building and testing Dev suite is enough.
    Thanks
    Ratheesh
    [    All Docs     ]
    http://otn.oracle.com/documentation/reports.html
    [     Publishing reports to web  - 10G  ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [   Building reports  - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [   Forms Reports Integration whitepaper  9i ]
    http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    ---------------------------------------------------------------------------------

  • New to mac,  please help - installer damaged!!!

    i apologize up front this may be scattered and rambling but i hope it makes sense, as i am in panic mode!
    I was recently trying to update microsoft office 2008 mac and once the download was complete it tried to install and failed! It said "installer is damaged" this may be due to administrator privileges or disk permissions, etc... blah blah blah... I did a permissions repair right before the update
    I have been using my iMac for about a month now, im somewhat familiar with it and everything is running fine... this is the first time i have been worried... is this the installer for that program? or my iMac?
    I hope i can still install apps on my iMac... what should i do ?
    please help, thanks in advance

    Hi Iturn,
    When you say you tried to updated MS Office 2008 I'm assuming you already had it on your iMac and just tried to install the 12.1.5 update, is that correct? If it is I had a similar situation when I tried to update to 12.1.5. It wasn't an iMac problem it was an issue with the Office 2008. After calling MS support we did a complete uninstall of Office 2008 (don't worry you won't lose data files), then re-installed it and then downloaded the update. After doing the uninstall, reinstall and update it has been working just fine.
    If you need help I would recommend calling MS, you will find the support number in it's documentation.

  • I BEG FOR HELP "INSTALLATION ENCOUNTERED ERRORS"????

    I'm growing more and more upset with this program and soon to be company.
    I love what you do, but I hate how you help.
    I have had the same problem for THREE MONTHS, and customer service has yet to help!
    I have lost two hundred dollars since I was unable to return my product.
    Please, can we get this problem fixed?
    Half way through my installation from Adobe Premiere Elements, the CD ejects.
    Stating "Your Installation Encountered Errors" with "Exit Code 7" labeled.
    What does this mean and how can i get around it?
    If its possible to call me and make this process quicker, I beg you to do so.
    602 329 0854
    - manny

    This is a user-to-user forum and I doubt someone would call you.  When you say customer service has yet to help, does that mean you’ve been on the phone for hours and hours with people in India and/or similar time with the same people on a chat session while they talk you through various things, and none of those things have helped?  Or have you not gotten through to anyone from customer service and found this forum?
    Adobe provides a 30-day trial for most of their products, so if you paid for it without testing it on your computer, that is not Adobe’s fault.  Most credit-card companies can handle refunds within 30-days, and if you didn’t do that, it, again, is not Adobe’s fault.
    If you provide some details about your system it is possible that someone here might be able to suggesting things to do to figure something out, but it may not be more than what Adobe Support did with you, already, if you have spent a bit of time with them.
    One suggestion I would have is to run the Adobe Log Analyzer to see if it finds anything.  And if it doesn’t, at least look at the installation logs to see what they say about the install failure.
    www.adobe.com/support/loganalyzer/

  • Please help - installer won't install, what am I doing wrong?

    Your help please! I need to upgrade from Mac OS X 10.4.10 to 11 but my installer just flashes up on the dock and then nothing happens. If I try to do a software update from the 'about this mac' window I just get a spinning wheel of death for hours on end and nothing happens... Can anybody help please? It is driving me up the pole!

    Hi brunos mum, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

  • HELP: Installation FDM / FDQM 11.1.2.1

    HI
    I am tired of this Hyperion FDM or FDQM installation.
    I downloaded this EPM Installer and than Downloaded FDM/FDQM. than I extracted FDM at same EPM Installer Location when i click on InstalTool.bat window appears for 30 second and than it disappears nothing happens after that.
    Am i doing wright way??
    looking for your help.
    Regads
    Sher

    Thanks this thing helped me, EMP System Installation tool is running when it reach to selecting components its shows bellow error:
    Error:
    EPMBNS-01016: Cannot install the selected Componet.
    Reason: EPMNS-01045: One or More required assemblies are missing cannot install one or more components
    even i downloaded FDM (V25479-01) and Installaer V17382-01
    Regards
    Sher

  • Why when i installed help installer does my icon on the task tab in windows 7 look funny?

    it looks like a white page instead of the normal icon. i also renamed some program files from firefox 4.0 beta7 and deleted the beta 7 from the name. help?

    Before attempting the steps below, I would highly suggest you visit the latest known issues for the current version, specifically FF 9 release notes.
    See:
    [[Latest Firefox issues]]
    1. Unpin the old firefox icon
    2. Go to c:\Program File (x86)\Mozilla Firefox\
    3. Double click on "firefox.exe" (FF window & icon will appear in supertaskbar)
    4. Pin this new icon by right clicking > Pin to Taskbar (Firefox Icon turns into whitebox)
    5. Make sure that you see the hidden folders
    [[windows.microsoft.com/en-US/windows7/Show-hidden-files]]
    6. Go to C:\Users\%yourusername%\AppData\Local
    7. Delete "IconCache.db"
    8. Open the taskmanager
    9. Kill explorer.exe by clicking on End Process
    10. In the taskmanager, File -> New Task (Run...) --> write "explorer.exe" without the quotation mark, press ok

  • Please help: Installation of WL6.1 SP2 aborts w no error message

    Hello,
    I am trying to install Weblogic Server 6.1 Service Pack 2 on a PC with AMD Duron
    800 MHz, 6 GB HD space, 419 MB RAM running Windows 2000 Professional. I have
    jdk1.3.1_02, j2sdkee v1.3.1, and TomCat v4.0 installed on the same PC. I have
    the c:\jdk1.3.1_02\bin as the first entry both in CLASSPATH and PATH System variables.
    After I double click on the .exe file for weblogic 6.1 SP2 to install, the InstallAnywhere
    progress window pops up and then after it completes, nothing happens.
    Please give me suggestions as to how I can install weblogic 6.1? Can I do a command
    line install in windows 2000 professional?
    Thanks in Advance,
    Jay

    Hi.
    there is no command line installation option for wls on windows, unfortunately.
    Have you searched the archives of this newsgroup for answers? There have been numerous
    postings and solutions regarding similar installation problems.
    Regards,
    Michael
    Jayanta wrote:
    Hello,
    I am trying to install Weblogic Server 6.1 Service Pack 2 on a PC with AMD Duron
    800 MHz, 6 GB HD space, 419 MB RAM running Windows 2000 Professional. I have
    jdk1.3.1_02, j2sdkee v1.3.1, and TomCat v4.0 installed on the same PC. I have
    the c:\jdk1.3.1_02\bin as the first entry both in CLASSPATH and PATH System variables.
    After I double click on the .exe file for weblogic 6.1 SP2 to install, the InstallAnywhere
    progress window pops up and then after it completes, nothing happens.
    Please give me suggestions as to how I can install weblogic 6.1? Can I do a command
    line install in windows 2000 professional?
    Thanks in Advance,
    Jay--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Need help installling from disk

    is there an install help like the download assist for adobe software, my computer won't install the programs from the disks

    We need more info about what you are trying to install on what system. Without even knowing what programs you are referring to, nobody can give any advise.
    Mylenium

Maybe you are looking for