Help!! J2SE 1.4.1 Not working on some Windows computers
Hello. I am very new to the Java Runtime Environment. Currently I am using version 1.4.1.
When I run a "JAR" file on some Windows 2000. "javaw.exe" starts, then stops. It gives no visible error message. The program does not appear on the screen. I am having this problem on two different computers running Windows 2000.
All the "JAR" files work on about a dozen other computers running either Windows 2000, or Windows XP, but for these two computers. The only thing these computers seem to have in common is they both have ATI "All-in-Wonder" Video Capture Cards.
The Sun Java plug-in for Internet Explorer works fine on both of these computers, but if I double click, or run the programs from the command line with the "javaw.exe -jar filename.jar" command I get the same response. Javaw.exe runs for a very short time, and then exits.
I have tried to reinstall the runtime on both computers, with no success.
The primary program I am trying to can be found at: http://dvarchive.sourceforge.net/
I have tried other JAR files on the ?broken? computers, and none of them seem to work. They all work on other computers with the same runtime installed.
I know this is not a lot of information to go on, and I would be willing to take any advice on how to get more debugging information.
Any advice would be greatly appreciated,
John Vincent
I just found out a log file is created. This is what the log files says:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_SINGLE_STEP occurred at PC=0x75E67CE3
Function=ImmLockClientImc+0x7
Library=C:\WINNT\System32\IMM32.dll
Current Java thread:
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00406000 C:\Program Files\Java\j2re1.4.1_01\bin\javaw.exe
0x77F80000 - 0x77FFB000 C:\WINNT\System32\ntdll.dll
0x77DB0000 - 0x77E0B000 C:\WINNT\system32\ADVAPI32.dll
0x77E80000 - 0x77F31000 C:\WINNT\system32\KERNEL32.dll
0x77D30000 - 0x77DA1000 C:\WINNT\system32\RPCRT4.dll
0x77E10000 - 0x77E6F000 C:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F79000 C:\WINNT\system32\GDI32.dll
0x78000000 - 0x78046000 C:\WINNT\system32\MSVCRT.dll
0x6D330000 - 0x6D45A000 C:\Program Files\Java\j2re1.4.1_01\bin\client\jvm.dll
0x77570000 - 0x775A0000 C:\WINNT\System32\WINMM.dll
0x6D1D0000 - 0x6D1D7000 C:\Program Files\Java\j2re1.4.1_01\bin\hpi.dll
0x6D300000 - 0x6D30D000 C:\Program Files\Java\j2re1.4.1_01\bin\verify.dll
0x6D210000 - 0x6D229000 C:\Program Files\Java\j2re1.4.1_01\bin\java.dll
0x6D320000 - 0x6D32D000 C:\Program Files\Java\j2re1.4.1_01\bin\zip.dll
0x6D000000 - 0x6D0FB000 C:\Program Files\Java\j2re1.4.1_01\bin\awt.dll
0x77800000 - 0x7781E000 C:\WINNT\System32\WINSPOOL.DRV
0x76620000 - 0x76630000 C:\WINNT\system32\MPR.dll
0x75E60000 - 0x75E7A000 C:\WINNT\System32\IMM32.dll
0x77A50000 - 0x77B45000 C:\WINNT\system32\ole32.dll
0x6D180000 - 0x6D1D0000 C:\Program Files\Java\j2re1.4.1_01\bin\fontmanager.dll
0x51000000 - 0x51044000 C:\WINNT\System32\ddraw.dll
0x728A0000 - 0x728A6000 C:\WINNT\System32\DCIMAN32.dll
0x72D90000 - 0x72E03000 C:\WINNT\System32\D3DIM.DLL
0x10000000 - 0x10006000 C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\IadHide3.dll
0x30000000 - 0x30041000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL
0x782F0000 - 0x78534000 C:\WINNT\system32\SHELL32.dll
0x70BD0000 - 0x70C35000 C:\WINNT\system32\SHLWAPI.dll
0x71710000 - 0x71794000 C:\WINNT\system32\COMCTL32.dll
0x6D2D0000 - 0x6D2DE000 C:\Program Files\Java\j2re1.4.1_01\bin\net.dll
0x75050000 - 0x75058000 C:\WINNT\System32\WSOCK32.dll
0x75030000 - 0x75043000 C:\WINNT\System32\WS2_32.DLL
0x75020000 - 0x75028000 C:\WINNT\System32\WS2HELP.DLL
0x782C0000 - 0x782CC000 C:\WINNT\System32\rnr20.dll
0x77980000 - 0x779A4000 C:\WINNT\System32\DNSAPI.DLL
0x77340000 - 0x77353000 C:\WINNT\System32\iphlpapi.dll
0x77520000 - 0x77525000 C:\WINNT\System32\ICMP.DLL
0x77320000 - 0x77337000 C:\WINNT\System32\MPRAPI.DLL
0x75150000 - 0x75160000 C:\WINNT\System32\SAMLIB.DLL
0x75170000 - 0x751BF000 C:\WINNT\System32\NETAPI32.DLL
0x77BE0000 - 0x77BEF000 C:\WINNT\System32\Secur32.dll
0x751C0000 - 0x751C6000 C:\WINNT\System32\NETRAP.dll
0x77950000 - 0x77978000 C:\WINNT\system32\WLDAP32.dll
0x779B0000 - 0x77A4B000 C:\WINNT\system32\OLEAUT32.DLL
0x773B0000 - 0x773DE000 C:\WINNT\System32\ACTIVEDS.DLL
0x77380000 - 0x773A2000 C:\WINNT\System32\ADSLDPC.DLL
0x77830000 - 0x7783E000 C:\WINNT\System32\RTUTILS.DLL
0x77880000 - 0x7790D000 C:\WINNT\System32\SETUPAPI.DLL
0x77C10000 - 0x77C6D000 C:\WINNT\System32\USERENV.DLL
0x774E0000 - 0x77512000 C:\WINNT\System32\RASAPI32.DLL
0x774C0000 - 0x774D1000 C:\WINNT\System32\RASMAN.DLL
0x77530000 - 0x77552000 C:\WINNT\System32\TAPI32.DLL
0x77360000 - 0x77379000 C:\WINNT\System32\DHCPCSVC.DLL
0x777E0000 - 0x777E8000 C:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000 C:\WINNT\System32\rasadhlp.dll
0x77920000 - 0x77943000 C:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 C:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 C:\WINNT\System32\PSAPI.DLL
Local Time = Thu Jan 02 21:34:07 2003
Elapsed Time = 10
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode)
Again, thank you for any advice.
John Vincent
Similar Messages
-
I get the following window pop up after trying to install Adobe Premiere Elements. After it prompts me to select the language i get this:
I think I figued it out... But why installations instructions didn't come up when I inserted the disk was very annoying. And because they didn't, Adobe should post th installations instructions somewhere on their support site. Not here now, which is also annoying.
-
Iweb site not working on some peoples computers
Hello, I made this website with iweb, www.outlawsrockmusical.com
It works fine on my imac using safari, but i have had some people using other browsers say it wont load at all. what could be causing this????You may want to post that on the iWeb forum.
-
Search help for cost center does not work after SP upgrade
Hi,
Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
ThanksKindly check note: 1259735 Search help of generic account does not work
Additionally Check the 5th question/answer of note 815849. -
HELP! MY TRACKPAD IS NOT WORKING
GUYS. PLS HELP. MY TRACKPAD IS NOT WORKING IM USING BB CURVE 9300. IM FROM THE PHILIPPINES. BUT MY MOM BOUGHT AT SAUDI ARABIA. TODAY, IM PLANNING TO GO IN A SERVICE CENTER IN ORTIGAS. AS PER CONVERSATION TO THE CELLPHONE TECHNICIAN. IT WILL COST 800. IS IT TOO EXPENSIVE? HELP! IS THERE ANY OTHER WAY AROUND???
Use the tab key to navigate around the Bluetooth Assistance screen and the spacebar to enter/select.
If the tab key doesn't move to all controls then press Control FN F7 one times and try the tab key again.
Regards,
Captfred -
In my ipad zoom function not working..some day before it worked,but when i double pinch with my three fingers it zooms negligible, wat to do?plzz help me..
It works when I reset my all settings...
Settings>general>reset>reset all settings
It never delete ur all contacts and any others,but ur wallpaper and wifi connection will change..it can be as before... -
HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes
please help my ipad min is not working on the scren it says iPad disabled connect to itunes
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help
My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help
-
Flash player does not work properly on Windows 7 32 bits
Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your helpHi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju' -
Outlook autodiscover is not working for some users in coexistence
Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank youHi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
MAM application is not working for some users
Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova -
Please help me understand why my I phone 4s is not working in some places and my HOME!! I have been to Apple 3 times and Intelos 5 times and no one knows whats wrong and they are telling me that no one else is having this problem. It's hurting my business because I can't get calls at home. I paid a lot of money for this and may have to pay to get out of it. I thought Apple was a good company but am changing my mind quick.
OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount..... -
MacBook Pro unibody, 15" 2009
ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
It seems like BIOS emulation does not allocate enough resources to ExpressCard.
Are others having the same problem?
Does anyone have a fix for this?
Is there anyone at Apple who cares to provide a solution?It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
(added link to Sonnet's explanation) -
Group Policy not work in some client machine.
Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
My sound is not working after downloading windows 10
My sound is not working after downloading windows 10 please can you help me?
right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver
Maybe you are looking for
-
My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?
-
hi sir, please tell my problem, i have estimated the material cost and released, closed the production order also. now i want cost estimate for same product with the same raw material no change in MOB,no change in price also. i want to make repeated
-
Microsoft Word is being a pain
ok here is the story. I found out Microsfot word, the test drive doesn't do printing. so we had a Microsoft Wofd 2004 we installed, then instead of the normla thing comming up like we nomally do, there is a window that said to find a past version to
-
Getting notifications I havent subscribed to. PLEASE MAKE THEM STOP!!!!!!!
I posted a question this morning. Now my Inbox is full of mail from Apple Discussions Descriptions. But I have never subscribed to any. The instructions for unsubsribing are: 1) Visit <http://discussions.apple.com> 2) Login, if you have not already.
-
I lost fm transmitter after update to anna
i lost fm transmitter after update to anna